@@ -349,8 +349,6 @@ struct mcp3564_chip_info {
* struct mcp3564_state - working data for a ADC device
* @chip_info: chip specific data
* @spi: SPI device structure
- * @vref: the regulator device used as a voltage reference in case
- * external voltage reference is used
* @vref_mv: voltage reference value in miliVolts
* @lock: synchronize access to driver's state members
* @dev_addr: hardware device address
@@ -369,7 +367,6 @@ struct mcp3564_chip_info {
struct mcp3564_state {
const struct mcp3564_chip_info *chip_info;
struct spi_device *spi;
- struct regulator *vref;
unsigned short vref_mv;
struct mutex lock; /* Synchronize access to driver's state members */
u8 dev_addr;
@@ -1085,11 +1082,6 @@ static int mcp3564_parse_fw_children(struct iio_dev *indio_dev)
return 0;
}
-static void mcp3564_disable_reg(void *reg)
-{
- regulator_disable(reg);
-}
-
static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc)
{
unsigned int pow = adc->chip_info->resolution - 1;
@@ -1110,7 +1102,7 @@ static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc)
}
}
-static int mcp3564_config(struct iio_dev *indio_dev)
+static int mcp3564_config(struct iio_dev *indio_dev, bool *use_auto_zeroing_ref_attr)
{
struct mcp3564_state *adc = iio_priv(indio_dev);
struct device *dev = &adc->spi->dev;
@@ -1119,6 +1111,7 @@ static int mcp3564_config(struct iio_dev *indio_dev)
enum mcp3564_ids ids;
int ret = 0;
unsigned int tmp = 0x01;
+ bool internal_vref;
bool err = false;
/*
@@ -1218,36 +1211,22 @@ static int mcp3564_config(struct iio_dev *indio_dev)
dev_dbg(dev, "Found %s chip\n", adc->chip_info->name);
- adc->vref = devm_regulator_get_optional(dev, "vref");
- if (IS_ERR(adc->vref)) {
- if (PTR_ERR(adc->vref) != -ENODEV)
- return dev_err_probe(dev, PTR_ERR(adc->vref),
- "failed to get regulator\n");
+ ret = devm_regulator_get_enable_read_voltage(dev, "vref");
+ if (ret < 0 && ret != -ENODEV)
+ return dev_err_probe(dev, ret, "Failed to get vref voltage\n");
+
+ internal_vref = ret == -ENODEV;
+ adc->vref_mv = internal_vref ? MCP3564R_INT_VREF_MV : ret / MILLI;
+ *use_auto_zeroing_ref_attr = internal_vref;
+ if (internal_vref) {
/* Check if chip has internal vref */
if (!adc->have_vref)
- return dev_err_probe(dev, PTR_ERR(adc->vref),
- "Unknown Vref\n");
- adc->vref = NULL;
+ return dev_err_probe(dev, -ENODEV, "Unknown Vref\n");
+
dev_dbg(dev, "%s: Using internal Vref\n", __func__);
} else {
- ret = regulator_enable(adc->vref);
- if (ret)
- return ret;
-
- ret = devm_add_action_or_reset(dev, mcp3564_disable_reg,
- adc->vref);
- if (ret)
- return ret;
-
dev_dbg(dev, "%s: Using External Vref\n", __func__);
-
- ret = regulator_get_voltage(adc->vref);
- if (ret < 0)
- return dev_err_probe(dev, ret,
- "Failed to read vref regulator\n");
-
- adc->vref_mv = ret / MILLI;
}
ret = mcp3564_parse_fw_children(indio_dev);
@@ -1350,10 +1329,8 @@ static int mcp3564_config(struct iio_dev *indio_dev)
tmp_reg |= FIELD_PREP(MCP3564_CONFIG0_CLK_SEL_MASK, MCP3564_CONFIG0_USE_INT_CLK);
tmp_reg |= MCP3456_CONFIG0_BIT6_DEFAULT;
- if (!adc->vref) {
+ if (internal_vref)
tmp_reg |= FIELD_PREP(MCP3456_CONFIG0_VREF_MASK, 1);
- adc->vref_mv = MCP3564R_INT_VREF_MV;
- }
ret = mcp3564_write_8bits(adc, MCP3564_CONFIG0_REG, tmp_reg);
@@ -1412,6 +1389,7 @@ static int mcp3564_probe(struct spi_device *spi)
int ret;
struct iio_dev *indio_dev;
struct mcp3564_state *adc;
+ bool use_auto_zeroing_ref_attr;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
if (!indio_dev)
@@ -1428,7 +1406,7 @@ static int mcp3564_probe(struct spi_device *spi)
* enable/disable certain channels
* change the sampling rate to the requested value
*/
- ret = mcp3564_config(indio_dev);
+ ret = mcp3564_config(indio_dev, &use_auto_zeroing_ref_attr);
if (ret)
return dev_err_probe(&spi->dev, ret,
"Can't configure MCP356X device\n");
@@ -1440,7 +1418,7 @@ static int mcp3564_probe(struct spi_device *spi)
indio_dev->name = adc->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
- if (!adc->vref)
+ if (use_auto_zeroing_ref_attr)
indio_dev->info = &mcp3564r_info;
else
indio_dev->info = &mcp3564_info;
This makes use of the new devm_regulator_get_enable_read_voltage() helper function to reduce boilerplate code in the MCP3564 ADC driver. The error message is slightly changed since there are fewer error return paths. Setting adc->vref_mv is consolidated into a single place to make the logic easier to follow. A use_auto_zeroing_ref_attr local variable is added to make it more obvious what the difference between the two iio info structures is. The return value of the "Unknown Vref" dev_err_probe() is hard-coded to -ENODEV instead of ret since it was getting a bit far from where ret was set and logically that is the only value it could have. Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/iio/adc/mcp3564.c | 54 ++++++++++++++--------------------------------- 1 file changed, 16 insertions(+), 38 deletions(-)