| Message ID | 20240602104021.387713-2-amadeus@jmu.edu.cn (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] dt-bindings: arm: mediatek: Add Bananapi BPI-R3 mini | expand |
Hi, I have made some changes to the dts, can you have a look? Maybe they can be added in the next version. https://github.com/openwrt/openwrt/pull/15936 Best regards, Shengyu 在 2024/6/2 18:40, Chukun Pan 写道: > The Bananapi BPI-R3 mini is a development board with the > MediaTek MT7986A (Filogic 830) SoC. > > Key Features: > 2GB DDR4 RAM > 8GB eMMC flash > 128MB Nand flash > MT7976C DBDC WiFi > 1x FAN connector > 1x NANO SIM slot > 1x USB2.0 Type-A > 1x M.2 Key B USB > 1x M.2 Key M PCIe > 2x 2.5GbE EN8811H Ethernet > Type-C PD 12V Power supply > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > --- > arch/arm64/boot/dts/mediatek/Makefile | 1 + > .../mediatek/mt7986a-bananapi-bpi-r3-mini.dts | 480 ++++++++++++++++++ > 2 files changed, 481 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 37b4ca3a87c9..14af5681d0ee 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts > new file mode 100644 > index 000000000000..683b7394ff79 > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts > @@ -0,0 +1,480 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > + > +/dts-v1/; > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/leds/common.h> > + > +#include "mt7986a.dtsi" > + > +/ { > + model = "Bananapi BPI-R3 mini"; > + chassis-type = "embedded"; > + compatible = "bananapi,bpi-r3-mini", "mediatek,mt7986a"; > + > + aliases { > + serial0 = &uart0; > + ethernet0 = &gmac0; > + ethernet1 = &gmac1; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + keys { > + compatible = "gpio-keys"; > + > + key-reset { > + label = "reset"; > + linux,code = <KEY_RESTART>; > + gpios = <&pio 7 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + led-0 { > + function = LED_FUNCTION_STATUS; > + color = <LED_COLOR_ID_GREEN>; > + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + fan: pwm-fan { > + compatible = "pwm-fan"; > + /* cooling level (0, 1, 2, 3) - pwm inverted */ > + cooling-levels = <255 128 64 0>; > + pwms = <&pwm 0 10000>; > + #cooling-cells = <2>; > + }; > + > + rfkill { > + compatible = "rfkill-gpio"; > + label = "rfkill-modem"; > + radio-type = "wwan"; > + reset-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&pio 13 GPIO_ACTIVE_HIGH>; > + }; > + > + dcin: regulator-12vd { > + compatible = "regulator-fixed"; > + regulator-name = "12vd"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + reg_1p8v: regulator-1p8v { > + compatible = "regulator-fixed"; > + regulator-name = "1.8vd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + vin-supply = <&dcin>; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3.3vd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + vin-supply = <&dcin>; > + }; > + > + reg_5v_vbus: regulator-5v-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "5v_vbus1"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + regulator-always-on; > + vin-supply = <&dcin>; > + }; > + > + /* labeled A_EN8811_PWR in schematic */ > + reg_phya: regulator-phya { > + compatible = "regulator-fixed"; > + gpio = <&pio 16 GPIO_ACTIVE_LOW>; > + regulator-name = "reg_phya"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* labeled B_EN8811_PWR in schematic */ > + reg_phyb: regulator-phyb { > + compatible = "regulator-fixed"; > + gpio = <&pio 17 GPIO_ACTIVE_LOW>; > + regulator-name = "reg_phyb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vcc_keyb: regulator-vcc-keyb { > + compatible = "regulator-fixed"; > + gpio = <&pio 20 GPIO_ACTIVE_LOW>; > + regulator-name = "vcc_keyb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <®_3p3v>; > + }; > +}; > + > +&cpu_thermal { > + cooling-maps { > + map-cpu-active-high { > + /* active: set fan to cooling level 3 */ > + cooling-device = <&fan 3 3>; > + trip = <&cpu_trip_active_high>; > + }; > + > + map-cpu-active-med { > + /* active: set fan to cooling level 2 */ > + cooling-device = <&fan 2 2>; > + trip = <&cpu_trip_active_med>; > + }; > + > + map-cpu-active-low { > + /* active: set fan to cooling level 1 */ > + cooling-device = <&fan 1 1>; > + trip = <&cpu_trip_active_low>; > + }; > + }; > +}; > + > +&crypto { > + status = "okay"; > +}; > + > +ð { > + pinctrl-names = "default"; > + pinctrl-0 = <&mdio_pins>; > + status = "okay"; > + > + gmac0: mac@0 { > + compatible = "mediatek,eth-mac"; > + reg = <0>; > + phy-mode = "2500base-x"; > + phy-handle = <&phy14>; > + phy-supply = <®_phya>; > + }; > + > + gmac1: mac@1 { > + compatible = "mediatek,eth-mac"; > + reg = <1>; > + phy-mode = "2500base-x"; > + phy-handle = <&phy15>; > + phy-supply = <®_phyb>; > + }; > + > + mdio: mdio-bus { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > +}; > + > +&mdio { > + phy14: phy@14 { > + compatible = "ethernet-phy-ieee802.3-c45"; > + reg = <14>; > + reset-assert-us = <10000>; > + reset-deassert-us = <20000>; > + reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>; > + interrupt-parent = <&pio>; > + interrupts = <48 IRQ_TYPE_EDGE_FALLING>; > + airoha,pnswap-rx; > + > + leds { > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + function = LED_FUNCTION_LAN; > + color = <LED_COLOR_ID_AMBER>; > + default-state = "keep"; > + }; > + > + led@1 { > + reg = <1>; > + function = LED_FUNCTION_LAN; > + color = <LED_COLOR_ID_GREEN>; > + default-state = "keep"; > + }; > + }; > + }; > + > + phy15: phy@15 { > + compatible = "ethernet-phy-ieee802.3-c45"; > + reg = <15>; > + reset-assert-us = <10000>; > + reset-deassert-us = <20000>; > + reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>; > + interrupt-parent = <&pio>; > + interrupts = <46 IRQ_TYPE_EDGE_FALLING>; > + airoha,pnswap-rx; > + > + leds { > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + function = LED_FUNCTION_WAN; > + color = <LED_COLOR_ID_AMBER>; > + default-state = "keep"; > + }; > + > + led@1 { > + reg = <1>; > + function = LED_FUNCTION_WAN; > + color = <LED_COLOR_ID_GREEN>; > + default-state = "keep"; > + }; > + }; > + }; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + status = "okay"; > + > + eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <8>; > + size = <256>; > + }; > +}; > + > +&spi0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi_flash_pins>; > + status = "okay"; > + > + spi_nand: flash@0 { > + compatible = "spi-nand"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + > + spi-max-frequency = <52000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <4>; > + }; > +}; > + > +&mmc0 { > + bus-width = <8>; > + cap-mmc-highspeed; > + hs400-ds-delay = <0x14014>; > + max-frequency = <200000000>; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + non-removable; > + no-sd; > + no-sdio; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + vmmc-supply = <®_3p3v>; > + vqmmc-supply = <®_1p8v>; > + status = "okay"; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_pins>; > + status = "okay"; > +}; > + > +&pcie_phy { > + status = "okay"; > +}; > + > +&pio { > + i2c0_pins: i2c0-pins { > + mux { > + function = "i2c"; > + groups = "i2c"; > + }; > + }; > + > + mdio_pins: mdio-pins { > + mux { > + function = "eth"; > + groups = "mdc_mdio"; > + }; > + }; > + > + spi_flash_pins: spi-flash-pins { > + mux { > + function = "spi"; > + groups = "spi0", "spi0_wp_hold"; > + }; > + conf-pu { > + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; > + drive-strength = <8>; > + mediatek,pull-up-adv = <0>; /* bias-disable */ > + }; > + conf-pd { > + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; > + drive-strength = <8>; > + mediatek,pull-down-adv = <0>; /* bias-disable */ > + }; > + }; > + > + mmc0_pins_default: mmc0-pins { > + mux { > + function = "emmc"; > + groups = "emmc_51"; > + }; > + conf-cmd-dat { > + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", > + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", > + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; > + input-enable; > + drive-strength = <4>; > + mediatek,pull-up-adv = <1>; /* pull-up 10K */ > + }; > + conf-clk { > + pins = "EMMC_CK"; > + drive-strength = <6>; > + mediatek,pull-down-adv = <2>; /* pull-down 50K */ > + }; > + conf-ds { > + pins = "EMMC_DSL"; > + mediatek,pull-down-adv = <2>; /* pull-down 50K */ > + }; > + conf-rst { > + pins = "EMMC_RSTB"; > + drive-strength = <4>; > + mediatek,pull-up-adv = <1>; /* pull-up 10K */ > + }; > + }; > + > + mmc0_pins_uhs: mmc0-uhs-pins { > + mux { > + function = "emmc"; > + groups = "emmc_51"; > + }; > + conf-cmd-dat { > + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", > + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", > + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; > + input-enable; > + drive-strength = <4>; > + mediatek,pull-up-adv = <1>; /* pull-up 10K */ > + }; > + conf-clk { > + pins = "EMMC_CK"; > + drive-strength = <6>; > + mediatek,pull-down-adv = <2>; /* pull-down 50K */ > + }; > + conf-ds { > + pins = "EMMC_DSL"; > + mediatek,pull-down-adv = <2>; /* pull-down 50K */ > + }; > + conf-rst { > + pins = "EMMC_RSTB"; > + drive-strength = <4>; > + mediatek,pull-up-adv = <1>; /* pull-up 10K */ > + }; > + }; > + > + pcie_pins: pcie-pins { > + mux { > + function = "pcie"; > + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; > + }; > + }; > + > + pwm_pins: pwm-pins { > + mux { > + function = "pwm"; > + groups = "pwm0", "pwm1_0"; > + }; > + }; > + > + uart1_pins: uart1-pins { > + mux { > + function = "uart"; > + groups = "uart1"; > + }; > + }; > + > + wf_led_pins: wf-led-pins { > + mux { > + function = "led"; > + groups = "wifi_led"; > + }; > + }; > + > + wf_dbdc_pins: wf-dbdc-pins { > + mux { > + function = "wifi"; > + groups = "wf_dbdc"; > + }; > + conf { > + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", > + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", > + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", > + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", > + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", > + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", > + "WF1_TOP_CLK", "WF1_TOP_DATA"; > + drive-strength = <4>; > + }; > + }; > +}; > + > +&pwm { > + pinctrl-names = "default"; > + pinctrl-0 = <&pwm_pins>; > + status = "okay"; > +}; > + > +&ssusb { > + vusb33-supply = <&vcc_keyb>; > + vbus-supply = <®_5v_vbus>; > + status = "okay"; > +}; > + > +&trng { > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>; > + status = "okay"; > +}; > + > +&usb_phy { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +}; > + > +&wifi { > + pinctrl-names = "dbdc"; > + pinctrl-0 = <&wf_dbdc_pins>, <&wf_led_pins>; > + status = "okay"; > +};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 37b4ca3a87c9..14af5681d0ee 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts new file mode 100644 index 000000000000..683b7394ff79 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "mt7986a.dtsi" + +/ { + model = "Bananapi BPI-R3 mini"; + chassis-type = "embedded"; + compatible = "bananapi,bpi-r3-mini", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + key-reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* cooling level (0, 1, 2, 3) - pwm inverted */ + cooling-levels = <255 128 64 0>; + pwms = <&pwm 0 10000>; + #cooling-cells = <2>; + }; + + rfkill { + compatible = "rfkill-gpio"; + label = "rfkill-modem"; + radio-type = "wwan"; + reset-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pio 13 GPIO_ACTIVE_HIGH>; + }; + + dcin: regulator-12vd { + compatible = "regulator-fixed"; + regulator-name = "12vd"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1.8vd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3.3vd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + reg_5v_vbus: regulator-5v-vbus { + compatible = "regulator-fixed"; + regulator-name = "5v_vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <&dcin>; + }; + + /* labeled A_EN8811_PWR in schematic */ + reg_phya: regulator-phya { + compatible = "regulator-fixed"; + gpio = <&pio 16 GPIO_ACTIVE_LOW>; + regulator-name = "reg_phya"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* labeled B_EN8811_PWR in schematic */ + reg_phyb: regulator-phyb { + compatible = "regulator-fixed"; + gpio = <&pio 17 GPIO_ACTIVE_LOW>; + regulator-name = "reg_phyb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_keyb: regulator-vcc-keyb { + compatible = "regulator-fixed"; + gpio = <&pio 20 GPIO_ACTIVE_LOW>; + regulator-name = "vcc_keyb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_3p3v>; + }; +}; + +&cpu_thermal { + cooling-maps { + map-cpu-active-high { + /* active: set fan to cooling level 3 */ + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_active_high>; + }; + + map-cpu-active-med { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_active_med>; + }; + + map-cpu-active-low { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active_low>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + phy-handle = <&phy14>; + phy-supply = <®_phya>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy15>; + phy-supply = <®_phyb>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + phy14: phy@14 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <14>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <48 IRQ_TYPE_EDGE_FALLING>; + airoha,pnswap-rx; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_AMBER>; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + default-state = "keep"; + }; + }; + }; + + phy15: phy@15 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <15>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + reset-gpios = <&pio 47 GPIO_ACTIVE_LOW>; + interrupt-parent = <&pio>; + interrupts = <46 IRQ_TYPE_EDGE_FALLING>; + airoha,pnswap-rx; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_AMBER>; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + default-state = "keep"; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <8>; + size = <256>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&mmc0 { + bus-width = <8>; + cap-mmc-highspeed; + hs400-ds-delay = <0x14014>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pio { + i2c0_pins: i2c0-pins { + mux { + function = "i2c"; + groups = "i2c"; + }; + }; + + mdio_pins: mdio-pins { + mux { + function = "eth"; + groups = "mdc_mdio"; + }; + }; + + spi_flash_pins: spi-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + + uart1_pins: uart1-pins { + mux { + function = "uart"; + groups = "uart1"; + }; + }; + + wf_led_pins: wf-led-pins { + mux { + function = "led"; + groups = "wifi_led"; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <&vcc_keyb>; + vbus-supply = <®_5v_vbus>; + status = "okay"; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + pinctrl-names = "dbdc"; + pinctrl-0 = <&wf_dbdc_pins>, <&wf_led_pins>; + status = "okay"; +};
The Bananapi BPI-R3 mini is a development board with the MediaTek MT7986A (Filogic 830) SoC. Key Features: 2GB DDR4 RAM 8GB eMMC flash 128MB Nand flash MT7976C DBDC WiFi 1x FAN connector 1x NANO SIM slot 1x USB2.0 Type-A 1x M.2 Key B USB 1x M.2 Key M PCIe 2x 2.5GbE EN8811H Ethernet Type-C PD 12V Power supply Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> --- arch/arm64/boot/dts/mediatek/Makefile | 1 + .../mediatek/mt7986a-bananapi-bpi-r3-mini.dts | 480 ++++++++++++++++++ 2 files changed, 481 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts