| Message ID | 20240705060613.28909-5-pkshih@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Chen-Yu Tsai |
| Headers | show |
| Series | [1/5] wireless-regdb: Update regulatory info for New Zealand (NZ) for 2022 | expand |
On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote: > > From: Ping-Ke Shih <pkshih@realtek.com> > > Republic ToGolaise released Decision N 226/ARCEP/DG/22. > > 2400-2483.5 MHz > - EIRP 100 mW and 10 mW/MHz density > 5150-5350 MHz > - EIRP 200 mW > - If TPC is not used, must be reduced by 3 dB > 5470-5850 MHz > - EIRP 1W > - If TPC is not used, must be reduced by 3 dB > 5925-6425 MHz > - LPI > * EIRP 23 dBm (200 mW) > * EIRP density 10 dBm/MHz The document you linked to suggests it is actually -10 dBm/MHz, which kind of makes it useless as the total e.i.r.p for a 20 MHz channel would be 2 mW or 3 dBm... And the PSD for LP being lower than VLP seems like an error. > * Use limited to indoor > - VLP > * EIRP 14 dBm (25 mW) > * EIRP density -1 dBm/MHz > 57-66 GHz > - EIRP 40 dBm and 13 dBm/MHz density > > [1] https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf > > Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> > --- > db.txt | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/db.txt b/db.txt > index 2a4f1ed524c1..6192dafe9715 100644 > --- a/db.txt > +++ b/db.txt > @@ -1763,11 +1763,15 @@ country TD: DFS-ETSI > (5250 - 5330 @ 80), (20), DFS, AUTO-BW > (5490 - 5710 @ 160), (27), DFS > > +# Source: > +# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf > country TG: DFS-ETSI > - (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 40), (20) > - (5250 - 5330 @ 40), (20), DFS > - (5490 - 5710 @ 40), (27), DFS > + (2400 - 2483.5 @ 40), (100 mW) > + (5150 - 5250 @ 40), (200 mW) > + (5250 - 5350 @ 40), (20), DFS The regulation doesn't say this can be split. It's one rule for 5150 - 5350. > + (5470 - 5850 @ 40), (27), DFS Why only 40 MHz channels? > + (5925 - 6425 @ 320), (23), NO-OUTDOOR > + (57000 - 66000 @2160), (40) Regulation requires DFS on all bands. ChenYu > # Source: > # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf > -- > 2.25.1 >
Chen-Yu Tsai <wens@kernel.org> wrote: > > On Fri, Jul 5, 2024 at 2:06 PM Ping-Ke Shih <pkshih@gmail.com> wrote: > > > > 5925-6425 MHz > > - LPI > > * EIRP 23 dBm (200 mW) > > * EIRP density 10 dBm/MHz > > The document you linked to suggests it is actually -10 dBm/MHz, > which kind of makes it useless as the total e.i.r.p for a 20 MHz > channel would be 2 mW or 3 dBm... > > And the PSD for LP being lower than VLP seems like an error. Since it looks like an error, I keep the power limit as I made, but add some description by v2. Thanks for the review. Ping-Ke
diff --git a/db.txt b/db.txt index 2a4f1ed524c1..6192dafe9715 100644 --- a/db.txt +++ b/db.txt @@ -1763,11 +1763,15 @@ country TD: DFS-ETSI (5250 - 5330 @ 80), (20), DFS, AUTO-BW (5490 - 5710 @ 160), (27), DFS +# Source: +# https://arcep.tg/wp-content/uploads/2022/12/Decision-226-22-Determinant-les-categories-et-conditions-techniques-dexploitation-des-appareils-de-faible-puissance-et-de-faible-portee.pdf country TG: DFS-ETSI - (2402 - 2482 @ 40), (20) - (5170 - 5250 @ 40), (20) - (5250 - 5330 @ 40), (20), DFS - (5490 - 5710 @ 40), (27), DFS + (2400 - 2483.5 @ 40), (100 mW) + (5150 - 5250 @ 40), (200 mW) + (5250 - 5350 @ 40), (20), DFS + (5470 - 5850 @ 40), (27), DFS + (5925 - 6425 @ 320), (23), NO-OUTDOOR + (57000 - 66000 @2160), (40) # Source: # https://ratchakitcha.soc.go.th/documents/140D100S0000000004000.pdf