| Message ID | 20240724153639.803263-5-olivier.moysan@foss.st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: adc: dfsdm: add scaling support | expand |
On Wed, 24 Jul 2024 17:36:32 +0200, Olivier Moysan wrote: > Change the DFSDM binding to use the new IIO backend framework, > along with the adoption of IIO generic channels. > This binding change allows to add scaling support to the DFSDM. > > Keep the legacy binding as deprecated for backward compatibility. > > The io-backends property is supported only in generic IIO channel > binding. > > - Channel description with the generic binding (Audio and Analog): > > Properties superseded by generic properties: > st,adc-channels: becomes "reg" property in channel node > st,adc-channel-names: becomes "label" property in channel node > Properties moved to channel child node: > st,adc-channel-types: becomes st,adc-channel-type > st,adc-channel-clk-src, st,adc-alt-channel > > - Analog binding: > > DFSDM filter channel is configured as an IIO backend consumer. > Add io-backends property in channel child nodes. > > DFSDM is no more configured as a channel consumer from SD modulator. > Use of io-channels in DFSDM node is deprecated. > > - Audio binding: > > DFSDM audio DAI is configured as a channel consumer from DFSDM filter. > No change compare to legacy. > > Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> > --- > .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 124 +++++++++++++++--- > 1 file changed, 108 insertions(+), 16 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml:421:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240724153639.803263-5-olivier.moysan@foss.st.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Jul 24, 2024 at 05:36:32PM +0200, Olivier Moysan wrote: > Change the DFSDM binding to use the new IIO backend framework, > along with the adoption of IIO generic channels. > This binding change allows to add scaling support to the DFSDM. > > Keep the legacy binding as deprecated for backward compatibility. > > The io-backends property is supported only in generic IIO channel > binding. > > - Channel description with the generic binding (Audio and Analog): > > Properties superseded by generic properties: > st,adc-channels: becomes "reg" property in channel node > st,adc-channel-names: becomes "label" property in channel node > Properties moved to channel child node: > st,adc-channel-types: becomes st,adc-channel-type > st,adc-channel-clk-src, st,adc-alt-channel > > - Analog binding: > > DFSDM filter channel is configured as an IIO backend consumer. > Add io-backends property in channel child nodes. > > DFSDM is no more configured as a channel consumer from SD modulator. > Use of io-channels in DFSDM node is deprecated. > > - Audio binding: > > DFSDM audio DAI is configured as a channel consumer from DFSDM filter. > No change compare to legacy. > > Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> > --- > .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 124 +++++++++++++++--- > 1 file changed, 108 insertions(+), 16 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml > index 2722edab1d9a..ceadd73504a4 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml > @@ -102,9 +102,11 @@ patternProperties: > items: > minimum: 0 > maximum: 7 > + deprecated: true > > st,adc-channel-names: > description: List of single-ended channel names. > + deprecated: true > > st,filter-order: > description: | > @@ -118,6 +120,12 @@ patternProperties: > "#io-channel-cells": > const: 1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > st,adc-channel-types: > description: | > Single-ended channel input type. > @@ -128,6 +136,7 @@ patternProperties: > items: > enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] > $ref: /schemas/types.yaml#/definitions/non-unique-string-array > + deprecated: true > > st,adc-channel-clk-src: > description: | > @@ -139,6 +148,7 @@ patternProperties: > items: > enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] > $ref: /schemas/types.yaml#/definitions/non-unique-string-array > + deprecated: true > > st,adc-alt-channel: > description: > @@ -147,6 +157,7 @@ patternProperties: > If not set, channel n is connected to SPI input n. > If set, channel n is connected to SPI input n + 1. > type: boolean > + deprecated: true > > st,filter0-sync: > description: > @@ -165,11 +176,60 @@ patternProperties: > - compatible > - reg > - interrupts > - - st,adc-channels > - - st,adc-channel-names > - st,filter-order > - "#io-channel-cells" > > + patternProperties: > + "^channel@([0-7])$": Don't need (). > + type: object > + $ref: adc.yaml > + unevaluatedProperties: false > + description: Represents the external channels which are connected to the DFSDM. > + > + properties: > + reg: > + maximum: 7 > + > + label: > + description: > + Unique name to identify which channel this is. > + > + st,adc-channel-type: > + description: | > + Single-ended channel input type. > + - "SPI_R": SPI with data on rising edge (default) > + - "SPI_F": SPI with data on falling edge > + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 > + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 > + $ref: /schemas/types.yaml#/definitions/string > + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] > + > + st,adc-channel-clk-src: > + description: | > + Conversion clock source. > + - "CLKIN": external SPI clock (CLKIN x) > + - "CLKOUT": internal SPI clock (CLKOUT) (default) > + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). > + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). > + $ref: /schemas/types.yaml#/definitions/string > + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] > + > + st,adc-alt-channel: > + description: > + Must be defined if two sigma delta modulators are > + connected on same SPI input. > + If not set, channel n is connected to SPI input n. > + If set, channel n is connected to SPI input n + 1. > + type: boolean > + > + io-backends: > + description: > + Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel. > + maxItems: 1 > + > + required: > + - reg > + > allOf: > - if: > properties: > @@ -199,9 +259,19 @@ patternProperties: > description: > From common IIO binding. Used to pipe external sigma delta > modulator or internal ADC output to DFSDM channel. > + deprecated: true > > - required: > - - io-channels > + if: > + required: > + - st,adc-channels > + then: > + required: > + - io-channels > + > + patternProperties: > + "^channel@([0-7])$": And here. With that and the newline fixed, Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 2722edab1d9a..ceadd73504a4 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,9 +102,11 @@ patternProperties: items: minimum: 0 maximum: 7 + deprecated: true st,adc-channel-names: description: List of single-ended channel names. + deprecated: true st,filter-order: description: | @@ -118,6 +120,12 @@ patternProperties: "#io-channel-cells": const: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + st,adc-channel-types: description: | Single-ended channel input type. @@ -128,6 +136,7 @@ patternProperties: items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-channel-clk-src: description: | @@ -139,6 +148,7 @@ patternProperties: items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] $ref: /schemas/types.yaml#/definitions/non-unique-string-array + deprecated: true st,adc-alt-channel: description: @@ -147,6 +157,7 @@ patternProperties: If not set, channel n is connected to SPI input n. If set, channel n is connected to SPI input n + 1. type: boolean + deprecated: true st,filter0-sync: description: @@ -165,11 +176,60 @@ patternProperties: - compatible - reg - interrupts - - st,adc-channels - - st,adc-channel-names - st,filter-order - "#io-channel-cells" + patternProperties: + "^channel@([0-7])$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + description: Represents the external channels which are connected to the DFSDM. + + properties: + reg: + maximum: 7 + + label: + description: + Unique name to identify which channel this is. + + st,adc-channel-type: + description: | + Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1 + - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 + $ref: /schemas/types.yaml#/definitions/string + enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] + + st,adc-channel-clk-src: + description: | + Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + $ref: /schemas/types.yaml#/definitions/string + enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] + + st,adc-alt-channel: + description: + Must be defined if two sigma delta modulators are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + type: boolean + + io-backends: + description: + Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel. + maxItems: 1 + + required: + - reg + allOf: - if: properties: @@ -199,9 +259,19 @@ patternProperties: description: From common IIO binding. Used to pipe external sigma delta modulator or internal ADC output to DFSDM channel. + deprecated: true - required: - - io-channels + if: + required: + - st,adc-channels + then: + required: + - io-channels + + patternProperties: + "^channel@([0-7])$": + required: + - io-backends - if: properties: @@ -298,6 +368,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + // Example 1: Audio use case with generic binding dfsdm0: filter@0 { compatible = "st,stm32-dfsdm-dmic"; reg = <0>; @@ -305,12 +376,18 @@ examples: dmas = <&dmamux1 101 0x400 0x01>; dma-names = "rx"; #io-channel-cells = <1>; - st,adc-channels = <1>; - st,adc-channel-names = "dmic0"; - st,adc-channel-types = "SPI_R"; - st,adc-channel-clk-src = "CLKOUT"; + #address-cells = <1>; + #size-cells = <0>; st,filter-order = <5>; + channel@1 { + reg = <1>; + label = "dmic0"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + }; + asoc_pdm0: dfsdm-dai { compatible = "st,stm32h7-dfsdm-dai"; #sound-dai-cells = <0>; @@ -318,20 +395,35 @@ examples: }; }; - dfsdm_pdm1: filter@1 { + // Example 2: Analog use case with generic binding + dfsdm1: filter@1 { compatible = "st,stm32-dfsdm-adc"; reg = <1>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; dmas = <&dmamux1 102 0x400 0x01>; dma-names = "rx"; - #io-channel-cells = <1>; - st,adc-channels = <2 3>; - st,adc-channel-names = "in2", "in3"; - st,adc-channel-types = "SPI_R", "SPI_R"; - st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F"; - io-channels = <&sd_adc2 &sd_adc3>; st,filter-order = <1>; + #io-channel-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + channel@2 { + reg = <2>; + label = "in2"; + st,adc-channel-type = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + st,adc-alt-channel; + io-backends = <&sd_adc2>; + }; + + channel@3 { + reg = <3>; + label = "in3"; + st,adc-channel-type = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + io-backends = <&sd_adc3>; + }; }; }; -... +... \ No newline at end of file
Change the DFSDM binding to use the new IIO backend framework, along with the adoption of IIO generic channels. This binding change allows to add scaling support to the DFSDM. Keep the legacy binding as deprecated for backward compatibility. The io-backends property is supported only in generic IIO channel binding. - Channel description with the generic binding (Audio and Analog): Properties superseded by generic properties: st,adc-channels: becomes "reg" property in channel node st,adc-channel-names: becomes "label" property in channel node Properties moved to channel child node: st,adc-channel-types: becomes st,adc-channel-type st,adc-channel-clk-src, st,adc-alt-channel - Analog binding: DFSDM filter channel is configured as an IIO backend consumer. Add io-backends property in channel child nodes. DFSDM is no more configured as a channel consumer from SD modulator. Use of io-channels in DFSDM node is deprecated. - Audio binding: DFSDM audio DAI is configured as a channel consumer from DFSDM filter. No change compare to legacy. Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> --- .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 124 +++++++++++++++--- 1 file changed, 108 insertions(+), 16 deletions(-)