| Message ID | 20240724111524.25441-1-pmenzel@molgen.mpg.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | USB: core: hub_port_reset: Remove extra 40 ms reset recovery time | expand |
On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: > This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b > ("[PATCH] USB: relax usbcore reset timings") from 2005. > > This adds unneeded 40 ms during resume from suspend on a majority of Wrong. It adds 40 ms to the recovery time from a port reset -- see the commit's title. Suspend and resume do not in general involve port resets (although sometimes they do). > devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS > 2.21.0 06/02/2022 with > The commit messages unfortunately does not list the devices needing this. > Should they surface again, these should be added to the quirk list for > USB_QUIRK_HUB_SLOW_RESET. This quirk applies to hubs that need extra time when one of their ports gets reset. However, it seems likely that the patch you are reverting was meant to help the device attached to the port, not the hub itself. Which would mean that the adding hubs to the quirk list won't help unless every hub is added -- in which case there's no point reverting the patch. Furthermore, should any of these bad hubs or devices still be in use, your change would cause them to stop working reliably. It would be a regression. A better approach would be to add a sysfs boolean attribute to the hub driver to enable the 40-ms reset-recovery delay, and make it default to True. Then people who don't need the delay could disable it from userspace, say by a udev rule. Alan Stern > Fixes: b789696af8b4 ("[PATCH] USB: relax usbcore reset timings") > Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: David Brownell <david-b@pacbell.net> > Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> > --- > drivers/usb/core/hub.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4b93c0bd1d4b..487d5fe60f0c 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -3110,7 +3110,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, > usleep_range(10000, 12000); > else { > /* TRSTRCY = 10 ms; plus some extra */ > - reset_recovery_time = 10 + 40; > + reset_recovery_time = 10; > > /* Hub needs extra delay after resetting its port. */ > if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) > -- > 2.45.2 > >
[Cc: -gregkh@suse.de] Dear Alan, Thank you for your reply. Am 24.07.24 um 16:10 schrieb Alan Stern: > On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: >> This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b >> ("[PATCH] USB: relax usbcore reset timings") from 2005. >> >> This adds unneeded 40 ms during resume from suspend on a majority of > > Wrong. It adds 40 ms to the recovery time from a port reset -- see the > commit's title. Suspend and resume do not in general involve port > resets (although sometimes they do). It looks like on my system the ports are reset: ``` $ grep suspend-240501-063619/hub_port_reset abreu_mem_ftrace.txt 6416.257589 | 3) kworker-9023 | | hub_port_reset [usbcore]() { 6416.387182 | 2) kworker-9023 | 129593.0 us | } /* hub_port_reset [usbcore] */ 6416.387380 | 2) kworker-9023 | | hub_port_reset [usbcore]() { 6416.513458 | 3) kworker-9023 | 126078.4 us | } /* hub_port_reset [usbcore] */ 6416.537813 | 2) kworker-9844 | | hub_port_reset [usbcore]() { 6416.666142 | 3) kworker-9844 | 128328.5 us | } /* hub_port_reset [usbcore] */ 6416.666429 | 3) kworker-9844 | | hub_port_reset [usbcore]() { 6416.793315 | 1) kworker-9844 | 126885.9 us | } /* hub_port_reset [usbcore] */ 6416.813559 | 1) kworker-9849 | | hub_port_reset [usbcore]() { 6416.941882 | 2) kworker-9849 | 128322.4 us | } /* hub_port_reset [usbcore] */ 6416.942633 | 2) kworker-9849 | | hub_port_reset [usbcore]() { 6417.069205 | 3) kworker-9849 | 126572.4 us | } /* hub_port_reset [usbcore] */ ``` >> devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS >> 2.21.0 06/02/2022 with > >> The commit messages unfortunately does not list the devices needing this. >> Should they surface again, these should be added to the quirk list for >> USB_QUIRK_HUB_SLOW_RESET. > > This quirk applies to hubs that need extra time when one of their ports > gets reset. However, it seems likely that the patch you are reverting > was meant to help the device attached to the port, not the hub itself. > Which would mean that the adding hubs to the quirk list won't help > unless every hub is added -- in which case there's no point reverting > the patch. > > Furthermore, should any of these bad hubs or devices still be in use, > your change would cause them to stop working reliably. It would be a > regression. > > A better approach would be to add a sysfs boolean attribute to the hub > driver to enable the 40-ms reset-recovery delay, and make it default to > True. Then people who don't need the delay could disable it from > userspace, say by a udev rule. How would you name it? Kind regards, Paul >> Fixes: b789696af8b4 ("[PATCH] USB: relax usbcore reset timings") >> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> >> Cc: Hans de Goede <hdegoede@redhat.com> >> Cc: David Brownell <david-b@pacbell.net> >> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> >> --- >> drivers/usb/core/hub.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c >> index 4b93c0bd1d4b..487d5fe60f0c 100644 >> --- a/drivers/usb/core/hub.c >> +++ b/drivers/usb/core/hub.c >> @@ -3110,7 +3110,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, >> usleep_range(10000, 12000); >> else { >> /* TRSTRCY = 10 ms; plus some extra */ >> - reset_recovery_time = 10 + 40; >> + reset_recovery_time = 10; >> >> /* Hub needs extra delay after resetting its port. */ >> if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) # suspend-050124-063619 abreu mem 6.9.0-rc6-00046-g18daea77cca6 # sysinfo | man:Dell Inc. | plat:XPS 13 9360 | cpu:Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz | bios:2.21.0 | biosdate:06/02/2022 | numcpu:4 | memsz:15934724 | memfr:6179424 | os:Debian GNU/Linux trixie/sid # command | analyze_suspend.py -f # fwsuspend 0 fwresume 1078072 [ 6413.931060] PM: suspend entry (deep) [ 6413.940286] Filesystems sync: 0.009 seconds [ 6413.944886] Freezing user space processes [ 6413.962822] Freezing user space processes completed (elapsed 0.017 seconds) [ 6413.962860] OOM killer disabled. [ 6413.962888] Freezing remaining freezable tasks [ 6413.968678] Freezing remaining freezable tasks completed (elapsed 0.005 seconds) [ 6413.968814] printk: Suspending console(s) (use no_console_suspend to debug) [ 6413.988706] wlp58s0: deauthenticating from 88:71:b1:81:93:1b by local choice (Reason: 3=DEAUTH_LEAVING) [ 6414.660605] PM: suspend of devices complete after 672.728 msecs [ 6414.660635] PM: start suspend of devices complete after 691.932 msecs [ 6414.696056] PM: late suspend of devices complete after 35.416 msecs [ 6414.707963] ACPI: EC: interrupt blocked [ 6414.784133] PM: noirq suspend of devices complete after 86.923 msecs [ 6414.784175] ACPI: PM: Preparing to enter system sleep state S3 [ 6414.982414] ACPI: EC: event blocked [ 6414.982432] ACPI: EC: EC stopped [ 6414.982449] ACPI: PM: Saving platform NVS memory [ 6414.984069] Disabling non-boot CPUs ... [ 6414.986995] smpboot: CPU 1 is now offline [ 6414.992323] smpboot: CPU 2 is now offline [ 6414.997333] smpboot: CPU 3 is now offline [ 6415.000365] Checking wakeup interrupts [ 6415.000389] Calling kvm_suspend+0x0/0x40 [kvm] [ 6415.000492] Calling intel_epb_save+0x0/0x30 [ 6415.000520] Calling mce_syscore_suspend+0x0/0x20 [ 6415.000545] Calling ledtrig_cpu_syscore_suspend+0x0/0x20 [ 6415.000574] Calling timekeeping_suspend+0x0/0x2f0 [ 6415.000740] Calling save_ioapic_entries+0x0/0xd0 [ 6415.002013] Calling i8259A_suspend+0x0/0x30 [ 6415.002046] Calling fw_suspend+0x0/0x20 [ 6415.002072] Calling acpi_save_bm_rld+0x0/0x30 [ 6415.002106] Calling lapic_suspend+0x0/0x160 [ 6415.005627] ACPI: PM: Low-level resume complete [ 6415.005692] ACPI: EC: EC started [ 6415.005696] ACPI: PM: Restoring platform NVS memory [ 6415.006905] Calling init_counter_refs+0x0/0x40 [ 6415.006931] Calling lapic_resume+0x0/0x220 [ 6415.007003] Calling acpi_restore_bm_rld+0x0/0x70 [ 6415.007033] Calling irqrouter_resume+0x0/0x50 [ 6415.007056] Calling i8259A_resume+0x0/0x40 [ 6415.007250] Calling ioapic_resume+0x0/0xc0 [ 6415.007516] Calling irq_pm_syscore_resume+0x0/0x20 [ 6415.008560] Calling timekeeping_resume+0x0/0x1e0 [ 6415.008713] Timekeeping suspended for 14.141 seconds [ 6415.008763] Calling ledtrig_cpu_syscore_resume+0x0/0x20 [ 6415.008787] Calling mce_syscore_resume+0x0/0x30 [ 6415.008830] Calling intel_epb_restore+0x0/0x90 [ 6415.008852] Calling microcode_bsp_resume+0x0/0xd0 [ 6415.008873] Calling kvm_resume+0x0/0x60 [kvm] [ 6415.008968] PM: Triggering wakeup from IRQ 51 [ 6415.009012] Enabling non-boot CPUs ... [ 6415.009269] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6415.010763] CPU1 is up [ 6415.011011] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 6415.012811] CPU2 is up [ 6415.013058] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6415.014687] CPU3 is up [ 6415.020688] ACPI: PM: Waking up from system sleep state S3 [ 6416.076910] ACPI: EC: interrupt unblocked [ 6416.106718] PM: noirq resume of devices complete after 30.451 msecs [ 6416.108539] PM: early resume of devices complete after 1.566 msecs [ 6416.108988] ACPI: EC: event unblocked [ 6416.124707] nvme nvme0: 4/0/0 default/read/poll queues [ 6416.142134] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6416.172126] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6416.248103] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6416.387187] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 6416.515241] ACPI Debug: "iGfx Supported Functions Bitmap " [ 6416.666145] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 6416.941885] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [ 6417.143205] PM: resume of devices complete after 1035.149 msecs [ 6417.155389] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 6417.169468] OOM killer enabled. [ 6417.169500] Restarting tasks ... done. [ 6417.217430] random: crng reseeded on system resumption [ 6417.423976] wlp58s0: authenticate with 88:71:b1:81:93:1a (local address=9c:b6:d0:d1:6a:b1) [ 6417.424204] wlp58s0: send auth to 88:71:b1:81:93:1a (try 1/3) [ 6417.429901] wlp58s0: authenticated [ 6417.432975] wlp58s0: associate with 88:71:b1:81:93:1a (try 1/3) [ 6417.475306] wlp58s0: RX AssocResp from 88:71:b1:81:93:1a (capab=0x1431 status=0 aid=1) [ 6417.480154] wlp58s0: associated [ 6417.556416] wlp58s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 88:71:b1:81:93:1a [ 6418.649695] PM: suspend exit
On Wed, Jul 24, 2024 at 08:14:34PM +0200, Paul Menzel wrote: > [Cc: -gregkh@suse.de] > > Dear Alan, > > > Thank you for your reply. > > Am 24.07.24 um 16:10 schrieb Alan Stern: > > On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: > > > This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b > > > ("[PATCH] USB: relax usbcore reset timings") from 2005. > > > > > > This adds unneeded 40 ms during resume from suspend on a majority of > > > > Wrong. It adds 40 ms to the recovery time from a port reset -- see the > > commit's title. Suspend and resume do not in general involve port > > resets (although sometimes they do). > > It looks like on my system the ports are reset: > > ``` > $ grep suspend-240501-063619/hub_port_reset abreu_mem_ftrace.txt > 6416.257589 | 3) kworker-9023 | | hub_port_reset > [usbcore]() { > 6416.387182 | 2) kworker-9023 | 129593.0 us | } /* > hub_port_reset [usbcore] */ > ``` It depends on the hardware and the kind of suspend. > > > devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS > > > 2.21.0 06/02/2022 with > > > > > The commit messages unfortunately does not list the devices needing this. > > > Should they surface again, these should be added to the quirk list for > > > USB_QUIRK_HUB_SLOW_RESET. > > > > This quirk applies to hubs that need extra time when one of their ports > > gets reset. However, it seems likely that the patch you are reverting > > was meant to help the device attached to the port, not the hub itself. > > Which would mean that the adding hubs to the quirk list won't help > > unless every hub is added -- in which case there's no point reverting > > the patch. > > > > Furthermore, should any of these bad hubs or devices still be in use, > > your change would cause them to stop working reliably. It would be a > > regression. > > > > A better approach would be to add a sysfs boolean attribute to the hub > > driver to enable the 40-ms reset-recovery delay, and make it default to > > True. Then people who don't need the delay could disable it from > > userspace, say by a udev rule. > > How would you name it? You could call it "long_reset_recovery". Anything like that would be okay. Alan Stern
Dear Alan, Am 24.07.24 um 20:52 schrieb Alan Stern: > On Wed, Jul 24, 2024 at 08:14:34PM +0200, Paul Menzel wrote: […] >> Am 24.07.24 um 16:10 schrieb Alan Stern: >>> On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: >>>> This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b >>>> ("[PATCH] USB: relax usbcore reset timings") from 2005. >>>> >>>> This adds unneeded 40 ms during resume from suspend on a majority of >>> >>> Wrong. It adds 40 ms to the recovery time from a port reset -- see the >>> commit's title. Suspend and resume do not in general involve port >>> resets (although sometimes they do). >> >> It looks like on my system the ports are reset: >> >> ``` >> $ grep suspend-240501-063619/hub_port_reset abreu_mem_ftrace.txt >> 6416.257589 | 3) kworker-9023 | | hub_port_reset [usbcore]() { >> 6416.387182 | 2) kworker-9023 | 129593.0 us | } /* hub_port_reset [usbcore] */ > >> ``` > > It depends on the hardware and the kind of suspend. It is ACPI S3 suspend. Can I find out, why the ports are reset? Not resetting the ports would be even better to reduce the resume time. >>>> devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS >>>> 2.21.0 06/02/2022 with >>> >>>> The commit messages unfortunately does not list the devices needing this. >>>> Should they surface again, these should be added to the quirk list for >>>> USB_QUIRK_HUB_SLOW_RESET. >>> >>> This quirk applies to hubs that need extra time when one of their ports >>> gets reset. However, it seems likely that the patch you are reverting >>> was meant to help the device attached to the port, not the hub itself. >>> Which would mean that the adding hubs to the quirk list won't help >>> unless every hub is added -- in which case there's no point reverting >>> the patch. >>> >>> Furthermore, should any of these bad hubs or devices still be in use, >>> your change would cause them to stop working reliably. It would be a >>> regression. >>> >>> A better approach would be to add a sysfs boolean attribute to the hub >>> driver to enable the 40-ms reset-recovery delay, and make it default to >>> True. Then people who don't need the delay could disable it from >>> userspace, say by a udev rule. >> >> How would you name it? > > You could call it "long_reset_recovery". Anything like that would be > okay. Would it be useful to makes it an integer instead of a boolean, and allow to configure the delay: `extra_reset_recovery_delay_ms`? Kind regards, Paul
On Wed, Jul 24, 2024 at 11:00:42PM +0200, Paul Menzel wrote: > Dear Alan, > > > Am 24.07.24 um 20:52 schrieb Alan Stern: > > On Wed, Jul 24, 2024 at 08:14:34PM +0200, Paul Menzel wrote: > > […] > > > > Am 24.07.24 um 16:10 schrieb Alan Stern: > > > > On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: > > > > > This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b > > > > > ("[PATCH] USB: relax usbcore reset timings") from 2005. > > > > > > > > > > This adds unneeded 40 ms during resume from suspend on a majority of > > > > > > > > Wrong. It adds 40 ms to the recovery time from a port reset -- see the > > > > commit's title. Suspend and resume do not in general involve port > > > > resets (although sometimes they do). > > > > > > It looks like on my system the ports are reset: > > > > > > ``` > > > $ grep suspend-240501-063619/hub_port_reset abreu_mem_ftrace.txt > > > 6416.257589 | 3) kworker-9023 | | hub_port_reset [usbcore]() { > > > 6416.387182 | 2) kworker-9023 | 129593.0 us | } /* hub_port_reset [usbcore] */ > > > > > ``` > > > > It depends on the hardware and the kind of suspend. > > It is ACPI S3 suspend. Can I find out, why the ports are reset? Not > resetting the ports would be even better to reduce the resume time. It's probably an xHCI thing -- the hardware may stop providing power to the ports during S3 suspend, or something like that. The xHCI people may have a better idea of what's going on. > > > > > devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS > > > > > 2.21.0 06/02/2022 with > > > > > > > > > The commit messages unfortunately does not list the devices needing this. > > > > > Should they surface again, these should be added to the quirk list for > > > > > USB_QUIRK_HUB_SLOW_RESET. > > > > > > > > This quirk applies to hubs that need extra time when one of their ports > > > > gets reset. However, it seems likely that the patch you are reverting > > > > was meant to help the device attached to the port, not the hub itself. > > > > Which would mean that the adding hubs to the quirk list won't help > > > > unless every hub is added -- in which case there's no point reverting > > > > the patch. > > > > > > > > Furthermore, should any of these bad hubs or devices still be in use, > > > > your change would cause them to stop working reliably. It would be a > > > > regression. > > > > > > > > A better approach would be to add a sysfs boolean attribute to the hub > > > > driver to enable the 40-ms reset-recovery delay, and make it default to > > > > True. Then people who don't need the delay could disable it from > > > > userspace, say by a udev rule. > > > > > > How would you name it? > > > > You could call it "long_reset_recovery". Anything like that would be > > okay. > > Would it be useful to makes it an integer instead of a boolean, and allow to > configure the delay: `extra_reset_recovery_delay_ms`? Sure, why not? Just so long as the default value matches the current behavior. Alan Stern
[To: +Heikki] Dear Alan, dear Heikki, Am 26.07.24 um 19:48 schrieb Alan Stern: > On Wed, Jul 24, 2024 at 11:00:42PM +0200, Paul Menzel wrote: >> Am 24.07.24 um 20:52 schrieb Alan Stern: >>> On Wed, Jul 24, 2024 at 08:14:34PM +0200, Paul Menzel wrote: >> >> […] >> >>>> Am 24.07.24 um 16:10 schrieb Alan Stern: >>>>> On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: >>>>>> This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b >>>>>> ("[PATCH] USB: relax usbcore reset timings") from 2005. >>>>>> >>>>>> This adds unneeded 40 ms during resume from suspend on a majority of >>>>> >>>>> Wrong. It adds 40 ms to the recovery time from a port reset -- see the >>>>> commit's title. Suspend and resume do not in general involve port >>>>> resets (although sometimes they do). >>>> >>>> It looks like on my system the ports are reset: >>>> >>>> ``` >>>> $ grep suspend-240501-063619/hub_port_reset abreu_mem_ftrace.txt >>>> 6416.257589 | 3) kworker-9023 | | hub_port_reset [usbcore]() { >>>> 6416.387182 | 2) kworker-9023 | 129593.0 us | } /* hub_port_reset [usbcore] */ >>> >>>> ``` >>> >>> It depends on the hardware and the kind of suspend. >> >> It is ACPI S3 suspend. Can I find out, why the ports are reset? Not >> resetting the ports would be even better to reduce the resume time. > > It's probably an xHCI thing -- the hardware may stop providing power to > the ports during S3 suspend, or something like that. The xHCI people > may have a better idea of what's going on. Heikki, can you confirm this. I am attaching the logs with echo 'file drivers/usb/* +p' | sudo tee /sys/kernel/debug/dynamic_debug/control The logs have: [ 150.414450] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x603 [ 150.474375] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 150.474378] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.474533] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.474537] xhci_hcd 0000:00:14.0: Successful reset device command. [ 150.474599] usb 1-3: reset full-speed USB device number 2 using xhci_hcd (The list thread also has more logs [1].) >>>>>> devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS >>>>>> 2.21.0 06/02/2022 with >>>>> >>>>>> The commit messages unfortunately does not list the devices needing this. >>>>>> Should they surface again, these should be added to the quirk list for >>>>>> USB_QUIRK_HUB_SLOW_RESET. >>>>> >>>>> This quirk applies to hubs that need extra time when one of their ports >>>>> gets reset. However, it seems likely that the patch you are reverting >>>>> was meant to help the device attached to the port, not the hub itself. >>>>> Which would mean that the adding hubs to the quirk list won't help >>>>> unless every hub is added -- in which case there's no point reverting >>>>> the patch. >>>>> >>>>> Furthermore, should any of these bad hubs or devices still be in use, >>>>> your change would cause them to stop working reliably. It would be a >>>>> regression. >>>>> >>>>> A better approach would be to add a sysfs boolean attribute to the hub >>>>> driver to enable the 40-ms reset-recovery delay, and make it default to >>>>> True. Then people who don't need the delay could disable it from >>>>> userspace, say by a udev rule. >>>> >>>> How would you name it? >>> >>> You could call it "long_reset_recovery". Anything like that would be >>> okay. >> >> Would it be useful to makes it an integer instead of a boolean, and allow to >> configure the delay: `extra_reset_recovery_delay_ms`? > > Sure, why not? Just so long as the default value matches the current > behavior. I hope, I am going to find time to take a stab at it. Kind regards, Paul [1]: https://lore.kernel.org/all/f1e2e2b1-b83c-4105-b62c-a053d18c2985@molgen.mpg.de/ [ 0.000000] Linux version 6.11.0-rc1-00155-g6504fb38efa6 (build@bohemianrhapsody.molgen.mpg.de) (gcc (Debian 13.3.0-2) 13.3.0, GNU ld (GNU Binutils for Debian) 2.42.50.20240710) #251 SMP PREEMPT_DYNAMIC Thu Aug 1 23:34:23 CEST 2024 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.11.0-rc1-00155-g6504fb38efa6 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000556aafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000556ac000-0x00000000556acfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000556ad000-0x0000000064df3fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000064df4000-0x000000006517ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006f872000-0x000000006fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000785fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078600000-0x000000007c7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004817fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x511ed018-0x511fd057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000511ed017] usable [ 0.000000] reserve setup_data: [mem 0x00000000511ed018-0x00000000511fd057] usable [ 0.000000] reserve setup_data: [mem 0x00000000511fd058-0x00000000556aafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000556ab000-0x00000000556abfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000556ac000-0x00000000556acfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000556ad000-0x0000000064df3fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000064df4000-0x000000006517ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000065180000-0x00000000651c3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000651c4000-0x000000006f871fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006f872000-0x000000006fffefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000070000000-0x0000000077ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000785fffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000078600000-0x000000007c7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004817fffff] usable [ 0.000000] efi: EFI v2.4 by American Megatrends [ 0.000000] efi: ACPI=0x6518d000 ACPI 2.0=0x6518d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x6f812000 ESRT=0x6fc86698 MEMATTR=0x62679298 INITRD=0x5577da98 TPMEventLog=0x55778018 [ 0.000000] efi: Remove mem36: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem37: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem38: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem40: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022 [ 0.000000] DMI: Memory slots populated: 2/2 [ 0.000000] tsc: Detected 2900.000 MHz processor [ 0.000000] tsc: Detected 2899.886 MHz TSC [ 0.000727] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000729] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000734] last_pfn = 0x481800 max_arch_pfn = 0x400000000 [ 0.000738] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.000740] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001016] last_pfn = 0x78600 max_arch_pfn = 0x400000000 [ 0.006833] esrt: Reserving ESRT space from 0x000000006fc86698 to 0x000000006fc866d0. [ 0.006839] Using GB pages for direct mapping [ 0.013044] printk: log_buf_len: 8388608 bytes [ 0.013045] printk: early log buf free: 125320(95%) [ 0.013046] Secure boot disabled [ 0.013047] RAMDISK: [mem 0x511fe000-0x5260dfff] [ 0.013050] ACPI: Early table checksum verification disabled [ 0.013054] ACPI: RSDP 0x000000006518D000 000024 (v02 DELL ) [ 0.013057] ACPI: XSDT 0x000000006518D0C8 00010C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013070] ACPI: FACP 0x00000000651B2A48 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.013074] ACPI: DSDT 0x000000006518D260 0257E7 (v02 DELL CBX3 01072009 INTL 20160422) [ 0.013076] ACPI: FACS 0x000000006F86F180 000040 [ 0.013078] ACPI: APIC 0x00000000651B2B58 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.013080] ACPI: FPDT 0x00000000651B2BE0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013082] ACPI: FIDT 0x00000000651B2C28 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013085] ACPI: MCFG 0x00000000651B2CD8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.013087] ACPI: HPET 0x00000000651B2D18 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.013089] ACPI: SSDT 0x00000000651B2D50 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.013091] ACPI: BOOT 0x00000000651B30B0 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013093] ACPI: SSDT 0x00000000651B30D8 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.013096] ACPI: HPET 0x00000000651B43A8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.013098] ACPI: SSDT 0x00000000651B43E0 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422) [ 0.013100] ACPI: UEFI 0x00000000651B5168 000042 (v01 00000000 00000000) [ 0.013102] ACPI: SSDT 0x00000000651B51B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.013104] ACPI: LPIT 0x00000000651B6090 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.013107] ACPI: WSMT 0x00000000651B6128 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.013109] ACPI: SSDT 0x00000000651B6150 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.013111] ACPI: SSDT 0x00000000651B62B8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.013113] ACPI: SSDT 0x00000000651B6558 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.013115] ACPI: SSDT 0x00000000651B9560 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.013118] ACPI: DBGP 0x00000000651B9640 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.013120] ACPI: DBG2 0x00000000651B9678 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.013122] ACPI: SSDT 0x00000000651B96D0 0007DD (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.013124] ACPI: SSDT 0x00000000651B9EB0 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.013126] ACPI: SLIC 0x00000000651C23A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.013128] ACPI: NHLT 0x00000000651C2520 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.013131] ACPI: BGRT 0x00000000651C2550 000038 (v00 01072009 AMI 00010013) [ 0.013133] ACPI: TPM2 0x00000000651C2588 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.013135] ACPI: ASF! 0x00000000651C25C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.013137] ACPI: DMAR 0x00000000651C2660 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.013139] ACPI: Reserving FACP table memory at [mem 0x651b2a48-0x651b2b53] [ 0.013140] ACPI: Reserving DSDT table memory at [mem 0x6518d260-0x651b2a46] [ 0.013141] ACPI: Reserving FACS table memory at [mem 0x6f86f180-0x6f86f1bf] [ 0.013142] ACPI: Reserving APIC table memory at [mem 0x651b2b58-0x651b2bdb] [ 0.013143] ACPI: Reserving FPDT table memory at [mem 0x651b2be0-0x651b2c23] [ 0.013143] ACPI: Reserving FIDT table memory at [mem 0x651b2c28-0x651b2cd3] [ 0.013144] ACPI: Reserving MCFG table memory at [mem 0x651b2cd8-0x651b2d13] [ 0.013145] ACPI: Reserving HPET table memory at [mem 0x651b2d18-0x651b2d4f] [ 0.013145] ACPI: Reserving SSDT table memory at [mem 0x651b2d50-0x651b30a8] [ 0.013146] ACPI: Reserving BOOT table memory at [mem 0x651b30b0-0x651b30d7] [ 0.013147] ACPI: Reserving SSDT table memory at [mem 0x651b30d8-0x651b43a6] [ 0.013148] ACPI: Reserving HPET table memory at [mem 0x651b43a8-0x651b43df] [ 0.013148] ACPI: Reserving SSDT table memory at [mem 0x651b43e0-0x651b5163] [ 0.013149] ACPI: Reserving UEFI table memory at [mem 0x651b5168-0x651b51a9] [ 0.013150] ACPI: Reserving SSDT table memory at [mem 0x651b51b0-0x651b608d] [ 0.013151] ACPI: Reserving LPIT table memory at [mem 0x651b6090-0x651b6123] [ 0.013151] ACPI: Reserving WSMT table memory at [mem 0x651b6128-0x651b614f] [ 0.013152] ACPI: Reserving SSDT table memory at [mem 0x651b6150-0x651b62b0] [ 0.013153] ACPI: Reserving SSDT table memory at [mem 0x651b62b8-0x651b6556] [ 0.013153] ACPI: Reserving SSDT table memory at [mem 0x651b6558-0x651b9559] [ 0.013154] ACPI: Reserving SSDT table memory at [mem 0x651b9560-0x651b963a] [ 0.013155] ACPI: Reserving DBGP table memory at [mem 0x651b9640-0x651b9673] [ 0.013156] ACPI: Reserving DBG2 table memory at [mem 0x651b9678-0x651b96cb] [ 0.013156] ACPI: Reserving SSDT table memory at [mem 0x651b96d0-0x651b9eac] [ 0.013157] ACPI: Reserving SSDT table memory at [mem 0x651b9eb0-0x651c23a0] [ 0.013158] ACPI: Reserving SLIC table memory at [mem 0x651c23a8-0x651c251d] [ 0.013158] ACPI: Reserving NHLT table memory at [mem 0x651c2520-0x651c254c] [ 0.013159] ACPI: Reserving BGRT table memory at [mem 0x651c2550-0x651c2587] [ 0.013160] ACPI: Reserving TPM2 table memory at [mem 0x651c2588-0x651c25bb] [ 0.013161] ACPI: Reserving ASF! table memory at [mem 0x651c25c0-0x651c265f] [ 0.013161] ACPI: Reserving DMAR table memory at [mem 0x651c2660-0x651c274f] [ 0.013288] No NUMA configuration found [ 0.013289] Faking a node at [mem 0x0000000000000000-0x00000004817fffff] [ 0.013297] NODE_DATA(0) allocated [mem 0x47f3d5000-0x47f3fffff] [ 0.013467] Zone ranges: [ 0.013468] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013470] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013471] Normal [mem 0x0000000100000000-0x00000004817fffff] [ 0.013472] Device empty [ 0.013473] Movable zone start for each node [ 0.013475] Early memory node ranges [ 0.013475] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.013476] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.013477] node 0: [mem 0x0000000000100000-0x00000000556aafff] [ 0.013478] node 0: [mem 0x00000000556ad000-0x0000000064df3fff] [ 0.013479] node 0: [mem 0x000000006ffff000-0x000000006fffffff] [ 0.013479] node 0: [mem 0x0000000078000000-0x00000000785fffff] [ 0.013480] node 0: [mem 0x0000000100000000-0x00000004817fffff] [ 0.013482] Initmem setup node 0 [mem 0x0000000000001000-0x00000004817fffff] [ 0.013486] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013487] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013511] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.015857] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.016294] On node 0, zone DMA32: 45579 pages in unavailable ranges [ 0.016818] On node 0, zone Normal: 31232 pages in unavailable ranges [ 0.017063] On node 0, zone Normal: 26624 pages in unavailable ranges [ 0.017070] Reserving Intel graphics memory at [mem 0x7a800000-0x7c7fffff] [ 0.017259] ACPI: PM-Timer IO Port: 0x1808 [ 0.017264] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.017266] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.017267] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.017267] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.017293] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.017296] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.017297] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.017300] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.017301] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.017307] e820: update [mem 0x62260000-0x623ecfff] usable ==> reserved [ 0.017315] TSC deadline timer available [ 0.017318] CPU topo: Max. logical packages: 1 [ 0.017319] CPU topo: Max. logical dies: 1 [ 0.017319] CPU topo: Max. dies per package: 1 [ 0.017323] CPU topo: Max. threads per core: 2 [ 0.017324] CPU topo: Num. cores per package: 2 [ 0.017324] CPU topo: Num. threads per package: 4 [ 0.017325] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.017343] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.017345] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.017347] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.017349] PM: hibernation: Registered nosave memory: [mem 0x511ed000-0x511edfff] [ 0.017350] PM: hibernation: Registered nosave memory: [mem 0x511fd000-0x511fdfff] [ 0.017352] PM: hibernation: Registered nosave memory: [mem 0x556ab000-0x556abfff] [ 0.017352] PM: hibernation: Registered nosave memory: [mem 0x556ac000-0x556acfff] [ 0.017354] PM: hibernation: Registered nosave memory: [mem 0x62260000-0x623ecfff] [ 0.017355] PM: hibernation: Registered nosave memory: [mem 0x64df4000-0x6517ffff] [ 0.017356] PM: hibernation: Registered nosave memory: [mem 0x65180000-0x651c3fff] [ 0.017357] PM: hibernation: Registered nosave memory: [mem 0x651c4000-0x6f871fff] [ 0.017357] PM: hibernation: Registered nosave memory: [mem 0x6f872000-0x6fffefff] [ 0.017359] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x77ffffff] [ 0.017361] PM: hibernation: Registered nosave memory: [mem 0x78600000-0x7c7fffff] [ 0.017361] PM: hibernation: Registered nosave memory: [mem 0x7c800000-0xfdffffff] [ 0.017362] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.017362] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.017363] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.017364] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.017364] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.017365] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.017366] [mem 0x7c800000-0xfdffffff] available for PCI devices [ 0.017367] Booting paravirtualized kernel on bare hardware [ 0.017369] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.021563] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.022062] percpu: Embedded 94 pages/cpu s290816 r65536 d28672 u524288 [ 0.022068] pcpu-alloc: s290816 r65536 d28672 u524288 alloc=1*2097152 [ 0.022070] pcpu-alloc: [0] 0 1 2 3 [ 0.022089] Kernel command line: BOOT_IMAGE=/vmlinuz-6.11.0-rc1-00155-g6504fb38efa6 root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer mem_sleep_default=deep log_buf_len=8M cryptomgr.notests [ 0.022149] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.11.0-rc1-00155-g6504fb38efa6", will be passed to user space. [ 0.022174] random: crng init done [ 0.023652] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.024393] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.024440] Fallback order for Node 0: 0 [ 0.024442] Built 1 zonelists, mobility grouping on. Total pages: 4090767 [ 0.024443] Policy zone: Normal [ 0.024449] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.024455] software IO TLB: area num 4. [ 0.042847] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.042849] kmemleak: Kernel memory leak detector disabled [ 0.042876] ftrace: allocating 42530 entries in 167 pages [ 0.049581] ftrace: allocated 167 pages with 5 groups [ 0.050185] Dynamic Preempt: voluntary [ 0.050216] rcu: Preemptible hierarchical RCU implementation. [ 0.050217] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.050218] Trampoline variant of Tasks RCU enabled. [ 0.050218] Rude variant of Tasks RCU enabled. [ 0.050219] Tracing variant of Tasks RCU enabled. [ 0.050219] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.050220] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.050225] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.050227] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.050228] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.052476] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.052683] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.052856] Console: colour dummy device 80x25 [ 0.052858] printk: legacy console [tty0] enabled [ 0.052893] ACPI: Core revision 20240322 [ 0.053035] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.053037] APIC: Switch to symmetric I/O mode setup [ 0.053038] DMAR: Host address width 39 [ 0.053039] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.053044] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.053047] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.053051] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.053052] DMAR: RMRR base: 0x00000064ec2000 end: 0x00000064ee1fff [ 0.053054] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007c7fffff [ 0.053055] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.053056] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.053058] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.053059] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.053060] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.054678] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.054679] x2apic enabled [ 0.054734] APIC: Switched APIC routing to: cluster x2apic [ 0.058780] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns [ 0.058785] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544) [ 0.058814] CPU0: Thermal monitoring enabled (TM1) [ 0.058850] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.058851] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.058855] process: using mwait in idle threads [ 0.058858] Spectre V2 : User space: Vulnerable [ 0.058859] Speculative Store Bypass: Vulnerable [ 0.058862] SRBDS: Vulnerable [ 0.058866] GDS: Vulnerable [ 0.058871] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.058872] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.058873] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.058873] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.058874] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.058875] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.058876] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.058877] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.058878] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.062783] Freeing SMP alternatives memory: 36K [ 0.062783] pid_max: default: 32768 minimum: 301 [ 0.062783] LSM: initializing lsm=capability,landlock,apparmor,bpf [ 0.062783] landlock: Up and running. [ 0.062783] AppArmor: AppArmor initialized [ 0.062783] LSM support for eBPF active [ 0.062783] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.062783] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.062783] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.062783] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.062783] ... version: 4 [ 0.062783] ... bit width: 48 [ 0.062783] ... generic registers: 4 [ 0.062783] ... value mask: 0000ffffffffffff [ 0.062783] ... max period: 00007fffffffffff [ 0.062783] ... fixed-purpose events: 3 [ 0.062783] ... event mask: 000000070000000f [ 0.062783] signal: max sigframe size: 1616 [ 0.062783] Estimated ratio of average max frequency by base frequency (times 1024): 1235 [ 0.062783] rcu: Hierarchical SRCU implementation. [ 0.062783] rcu: Max phase no-delay instances is 1000. [ 0.062783] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.062783] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.062783] smp: Bringing up secondary CPUs ... [ 0.062783] smpboot: x86: Booting SMP configuration: [ 0.062783] .... node #0, CPUs: #1 #2 #3 [ 0.062822] smp: Brought up 1 node, 4 CPUs [ 0.062822] smpboot: Total of 4 processors activated (23199.08 BogoMIPS) [ 0.083168] node 0 deferred pages initialised in 20ms [ 0.085347] Memory: 15896668K/16363068K available (14336K kernel code, 2506K rwdata, 9804K rodata, 2892K init, 6576K bss, 455516K reserved, 0K cma-reserved) [ 0.086912] devtmpfs: initialized [ 0.086912] x86/mm: Memory block size: 128MB [ 0.087844] ACPI: PM: Registering ACPI NVS region [mem 0x556ab000-0x556abfff] (4096 bytes) [ 0.087844] ACPI: PM: Registering ACPI NVS region [mem 0x651c4000-0x6f871fff] (174776320 bytes) [ 0.088152] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.088158] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.088212] pinctrl core: initialized pinctrl subsystem [ 0.088647] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.088855] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.088961] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.089084] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.089099] audit: initializing netlink subsys (disabled) [ 0.089112] audit: type=2000 audit(1722751027.028:1): state=initialized audit_enabled=0 res=1 [ 0.089112] thermal_sys: Registered thermal governor 'fair_share' [ 0.089112] thermal_sys: Registered thermal governor 'bang_bang' [ 0.089112] thermal_sys: Registered thermal governor 'step_wise' [ 0.089112] thermal_sys: Registered thermal governor 'user_space' [ 0.089112] thermal_sys: Registered thermal governor 'power_allocator' [ 0.089112] cpuidle: using governor ladder [ 0.089112] cpuidle: using governor menu [ 0.089112] Simple Boot Flag at 0x47 set to 0x80 [ 0.089112] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.089112] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.089112] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.089112] PCI: Using configuration type 1 for base access [ 0.089112] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.090858] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.090858] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.090858] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.090858] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.090883] ACPI: Added _OSI(Module Device) [ 0.090883] ACPI: Added _OSI(Processor Device) [ 0.090883] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.090883] ACPI: Added _OSI(Processor Aggregator Device) [ 0.120091] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.127915] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.132374] ACPI: Dynamic OEM Table Load: [ 0.132374] ACPI: SSDT 0xFFFF9C798115E400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.132374] ACPI: Dynamic OEM Table Load: [ 0.132374] ACPI: SSDT 0xFFFF9C7AE7E1C000 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.135484] ACPI: Dynamic OEM Table Load: [ 0.135489] ACPI: SSDT 0xFFFF9C7AE7E1A000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.136565] ACPI: Dynamic OEM Table Load: [ 0.136568] ACPI: SSDT 0xFFFF9C79803C2600 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.139028] ACPI: EC: EC started [ 0.139030] ACPI: EC: interrupt blocked [ 0.144591] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.144594] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.144596] ACPI: Interpreter enabled [ 0.144628] ACPI: PM: (supports S0 S3 S4 S5) [ 0.144630] ACPI: Using IOAPIC for interrupt routing [ 0.144663] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.144664] PCI: Using E820 reservations for host bridge windows [ 0.145167] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.148210] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.148459] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.148708] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.148954] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.149200] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.149446] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.150039] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.150286] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.150536] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.150781] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.151030] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.151276] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.151525] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.151776] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.152022] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.152268] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.152513] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.153539] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.153789] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.154035] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.175597] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.175603] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.175755] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.176030] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.176031] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.176740] PCI host bridge to bus 0000:00 [ 0.176743] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.176746] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.176748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.176749] pci_bus 0000:00: root bus resource [mem 0x7c800000-0xdfffffff window] [ 0.176751] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.176752] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.176767] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 conventional PCI endpoint [ 0.176827] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.176834] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit] [ 0.176838] pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref] [ 0.176841] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.176855] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.176977] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint [ 0.176985] pci 0000:00:04.0: BAR 0 [mem 0xdc320000-0xdc327fff 64bit] [ 0.177220] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint [ 0.177236] pci 0000:00:14.0: BAR 0 [mem 0xdc310000-0xdc31ffff 64bit] [ 0.177289] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.177726] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint [ 0.177742] pci 0000:00:14.2: BAR 0 [mem 0xdc334000-0xdc334fff 64bit] [ 0.177874] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint [ 0.177915] pci 0000:00:15.0: BAR 0 [mem 0xdc333000-0xdc333fff 64bit] [ 0.178215] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint [ 0.178245] pci 0000:00:15.1: BAR 0 [mem 0xdc332000-0xdc332fff 64bit] [ 0.178540] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint [ 0.178552] pci 0000:00:16.0: BAR 0 [mem 0xdc331000-0xdc331fff 64bit] [ 0.178596] pci 0000:00:16.0: PME# supported from D3hot [ 0.178884] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port [ 0.178903] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.178908] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.178915] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.178962] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.179342] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port [ 0.179360] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.179365] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.179423] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.179801] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port [ 0.179819] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 0.179822] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.179870] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.180260] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 conventional PCI endpoint [ 0.180528] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint [ 0.180539] pci 0000:00:1f.2: BAR 0 [mem 0xdc32c000-0xdc32ffff] [ 0.180734] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint [ 0.180753] pci 0000:00:1f.3: BAR 0 [mem 0xdc328000-0xdc32bfff 64bit] [ 0.180776] pci 0000:00:1f.3: BAR 4 [mem 0xdc300000-0xdc30ffff 64bit] [ 0.180816] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.181338] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint [ 0.181396] pci 0000:00:1f.4: BAR 0 [mem 0xdc330000-0xdc3300ff 64bit] [ 0.181467] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] [ 0.181765] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.182106] pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint [ 0.182321] pci 0000:3a:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit] [ 0.183501] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold [ 0.185101] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.185193] pci 0000:3b:00.0: [1c5c:1284] type 00 class 0x010802 PCIe Endpoint [ 0.185212] pci 0000:3b:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit] [ 0.185322] pci 0000:3b:00.0: PME# supported from D0 D1 D3hot [ 0.185640] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 0.188245] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.188245] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.188245] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.197652] ACPI: EC: interrupt unblocked [ 0.197654] ACPI: EC: event unblocked [ 0.197659] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.197660] ACPI: EC: GPE=0x14 [ 0.197661] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.197663] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.197720] iommu: Default domain type: Translated [ 0.197720] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.197720] pps_core: LinuxPPS API ver. 1 registered [ 0.197720] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.197720] PTP clock support registered [ 0.197720] EDAC MC: Ver: 3.0.0 [ 0.197720] efivars: Registered efivars operations [ 0.197720] NetLabel: Initializing [ 0.197720] NetLabel: domain hash size = 128 [ 0.197720] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.197720] NetLabel: unlabeled traffic allowed by default [ 0.197720] PCI: Using ACPI for IRQ routing [ 0.219928] PCI: pci_cache_line_size set to 64 bytes [ 0.220303] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.220305] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.220306] e820: reserve RAM buffer [mem 0x511ed018-0x53ffffff] [ 0.220307] e820: reserve RAM buffer [mem 0x556ab000-0x57ffffff] [ 0.220308] e820: reserve RAM buffer [mem 0x62260000-0x63ffffff] [ 0.220311] e820: reserve RAM buffer [mem 0x64df4000-0x67ffffff] [ 0.220312] e820: reserve RAM buffer [mem 0x78600000-0x7bffffff] [ 0.220313] e820: reserve RAM buffer [mem 0x481800000-0x483ffffff] [ 0.222792] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.222792] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.222792] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.222794] vgaarb: loaded [ 0.222835] clocksource: Switched to clocksource tsc-early [ 0.223256] VFS: Disk quotas dquot_6.6.0 [ 0.223263] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.223338] AppArmor: AppArmor Filesystem Enabled [ 0.223349] pnp: PnP ACPI init [ 0.223550] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.223553] system 00:00: [io 0xffff] has been reserved [ 0.223554] system 00:00: [io 0xffff] has been reserved [ 0.223555] system 00:00: [io 0xffff] has been reserved [ 0.223556] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.223557] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.223672] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.223994] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.223996] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.223998] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.223999] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.224000] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.224002] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.224003] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.224004] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.224006] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.224007] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.224040] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.224042] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.224044] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.224045] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.224046] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.224047] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.224049] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.224286] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.225200] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.225202] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.229738] pnp: PnP ACPI: found 9 devices [ 0.235060] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.235106] NET: Registered PF_INET protocol family [ 0.235224] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.245622] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.245654] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.245686] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.245858] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.246067] TCP: Hash tables configured (established 131072 bind 65536) [ 0.246137] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.246185] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.246217] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.246268] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.246273] NET: Registered PF_XDP protocol family [ 0.246280] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000 [ 0.246289] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned [ 0.246292] pci 0000:00:1c.0: PCI bridge to [bus 01-39] [ 0.246295] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.246298] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff] [ 0.246301] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.246305] pci 0000:00:1c.4: PCI bridge to [bus 3a] [ 0.246308] pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.246314] pci 0000:00:1d.0: PCI bridge to [bus 3b] [ 0.246316] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.246321] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.246323] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.246324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 0.246325] pci_bus 0000:00: resource 7 [mem 0x7c800000-0xdfffffff window] [ 0.246326] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.246329] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.246330] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff] [ 0.246331] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref] [ 0.246333] pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff] [ 0.246335] pci_bus 0000:3b: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.246916] PCI: CLS 0 bytes, default 64 [ 0.246958] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint [ 0.247017] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] [ 0.247243] DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0 [ 0.247246] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1 [ 0.247256] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.247257] software IO TLB: mapped [mem 0x000000005e260000-0x0000000062260000] (64MB) [ 0.247280] Unpacking initramfs... [ 0.247295] sgx: EPC section 0x70200000-0x75f7ffff [ 0.248063] Initialise system trusted keyrings [ 0.248072] Key type blacklist registered [ 0.248148] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.248179] zbud: loaded [ 0.248408] fuse: init (API version 7.40) [ 0.248671] Key type asymmetric registered [ 0.248675] Asymmetric key parser 'x509' registered [ 0.274462] Freeing initrd memory: 20544K [ 0.277318] alg: self-tests disabled [ 0.277372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.277395] io scheduler mq-deadline registered [ 0.278439] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.280428] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.280430] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.280568] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.281131] hpet_acpi_add: no address or irqs in _CRS [ 0.293111] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4) [ 0.328185] SPI driver spidev has no spi_device_id for rohm,bh2228fv [ 0.328294] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.329872] i8042: Warning: Keylock active [ 0.332146] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.332150] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.332247] mousedev: PS/2 mouse device common for all mice [ 0.332257] rtc_cmos 00:01: RTC can wake from S4 [ 0.332974] rtc_cmos 00:01: registered as rtc0 [ 0.333116] rtc_cmos 00:01: setting system clock to 2024-08-04T05:57:07 UTC (1722751027) [ 0.333137] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.333252] intel_pstate: Intel P-state driver initializing [ 0.333475] intel_pstate: HWP enabled [ 0.333532] ledtrig-cpu: registered to indicate activity on CPUs [ 0.333733] efifb: probing for efifb [ 0.333742] efifb: framebuffer at 0x90000000, using 22500k, total 22500k [ 0.333743] efifb: mode is 3200x1800x32, linelength=12800, pages=1 [ 0.333745] efifb: scrolling: redraw [ 0.333745] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.333822] Console: switching to colour frame buffer device 200x56 [ 0.334201] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.337247] fb0: EFI VGA frame buffer device [ 0.337372] NET: Registered PF_INET6 protocol family [ 0.340918] Segment Routing with IPv6 [ 0.340931] In-situ OAM (IOAM) with IPv6 [ 0.340950] mip6: Mobile IPv6 [ 0.340954] NET: Registered PF_PACKET protocol family [ 0.340976] mpls_gso: MPLS GSO support [ 0.341137] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.341248] microcode: Current revision: 0x000000f4 [ 0.341250] microcode: Updated early from: 0x000000f0 [ 0.341297] IPI shorthand broadcast: enabled [ 0.342172] sched_clock: Marking stable (336002977, 5971084)->(353738187, -11764126) [ 0.342270] registered taskstats version 1 [ 0.342337] Loading compiled-in X.509 certificates [ 0.343690] Demotion targets for Node 0: null [ 0.343837] Key type .fscrypt registered [ 0.343838] Key type fscrypt-provisioning registered [ 0.348280] cryptd: max_cpu_qlen set to 1000 [ 0.348983] AES CTR mode by8 optimization enabled [ 0.361836] Key type encrypted registered [ 0.361841] AppArmor: AppArmor sha256 policy hashing enabled [ 0.362252] RAS: Correctable Errors collector initialized. [ 0.371504] clk: Disabling unused clocks [ 0.372211] Freeing unused decrypted memory: 2036K [ 0.372568] Freeing unused kernel image (initmem) memory: 2892K [ 0.372580] Write protecting the kernel read-only data: 24576k [ 0.372886] Freeing unused kernel image (rodata/data gap) memory: 436K [ 0.383487] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.383492] Run /init as init process [ 0.383493] with arguments: [ 0.383494] /init [ 0.383495] with environment: [ 0.383495] HOME=/ [ 0.383496] TERM=linux [ 0.383496] BOOT_IMAGE=/vmlinuz-6.11.0-rc1-00155-g6504fb38efa6 [ 0.445961] hid: raw HID events driver (C) Jiri Kosina [ 0.468029] ACPI: bus type drm_connector registered [ 0.468478] nvme nvme0: pci function 0000:3b:00.0 [ 0.472527] ACPI: bus type USB registered [ 0.472624] usbcore: registered new interface driver usbfs [ 0.472635] usbcore: registered new interface driver hub [ 0.472646] usbcore: registered new device driver usb [ 0.473083] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 0.473294] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 0.482344] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 0.482532] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 0.486862] nvme nvme0: 4/0/0 default/read/poll queues [ 0.492526] nvme0n1: p1 p2 p3 p4 [ 0.493952] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.494003] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.651233] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.651254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.652459] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.652794] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input2 [ 0.653056] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input3 [ 0.653304] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 0.654653] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.654671] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.654685] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.654882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 0.654899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.654906] usb usb1: Product: xHCI Host Controller [ 0.654912] usb usb1: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 0.654918] usb usb1: SerialNumber: 0000:00:14.0 [ 0.657609] hub 1-0:1.0: USB hub found [ 0.657671] hub 1-0:1.0: 12 ports detected [ 0.663070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 0.663082] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.663088] usb usb2: Product: xHCI Host Controller [ 0.663092] usb usb2: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 0.663096] usb usb2: SerialNumber: 0000:00:14.0 [ 0.663428] hub 2-0:1.0: USB hub found [ 0.663469] hub 2-0:1.0: 6 ports detected [ 0.697461] device-mapper: uevent: version 1.0.3 [ 0.697645] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.922164] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.072386] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01 [ 1.072402] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.202208] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.274176] tsc: Refined TSC clocksource calibration: 2904.007 MHz [ 1.274197] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc0c50045, max_idle_ns: 440795208304 ns [ 1.274273] clocksource: Switched to clocksource tsc [ 1.353101] usb 1-4: New USB device found, idVendor=04f3, idProduct=2234, bcdDevice=11.11 [ 1.353117] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 1.353124] usb 1-4: Product: Touchscreen [ 1.353129] usb 1-4: Manufacturer: ELAN [ 1.367619] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input5 [ 1.367766] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input6 [ 1.367795] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input7 [ 1.368023] hid-generic 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 1.368064] usbcore: registered new interface driver usbhid [ 1.368066] usbhid: USB HID core driver [ 1.482215] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 1.690985] usb 1-5: New USB device found, idVendor=0c45, idProduct=670c, bcdDevice=56.26 [ 1.691002] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.691008] usb 1-5: Product: Integrated_Webcam_HD [ 1.691013] usb 1-5: Manufacturer: CN09GTFMLOG008C8B7FWA01 [ 19.382668] PM: Image not found (code -22) [ 19.499236] EXT4-fs (dm-0): mounted filesystem 32e29882-d94d-4a92-9ee4-4d03002bfa29 ro with ordered data mode. Quota mode: none. [ 19.593858] systemd[1]: Inserted module 'autofs4' [ 19.627461] systemd[1]: systemd 256.4-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) [ 19.627472] systemd[1]: Detected architecture x86-64. [ 19.629464] systemd[1]: Hostname set to <abreu>. [ 19.822019] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 19.991532] systemd[1]: Queued start job for default target graphical.target. [ 20.015035] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 20.015318] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 20.015554] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. [ 20.015794] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 20.015949] systemd[1]: Created slice user.slice - User and Session Slice. [ 20.015991] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 20.016022] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 20.016152] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 20.016170] systemd[1]: Expecting device dev-disk-by\x2ddiskseq-1\x2dpart4.device - /dev/disk/by-diskseq/1-part4... [ 20.016176] systemd[1]: Expecting device dev-disk-by\x2duuid-2d23fd4c\x2d5d03\x2d4e1a\x2d8a42\x2d0e859d1f00d8.device - /dev/disk/by-uuid/2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8... [ 20.016180] systemd[1]: Expecting device dev-disk-by\x2duuid-61be8f50\x2d69c5\x2d49a5\x2dbcad\x2d3f4521e9c7b5.device - /dev/disk/by-uuid/61be8f50-69c5-49a5-bcad-3f4521e9c7b5... [ 20.016185] systemd[1]: Expecting device dev-disk-by\x2duuid-96BD\x2d5653.device - /dev/disk/by-uuid/96BD-5653... [ 20.016208] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 20.016230] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 20.016240] systemd[1]: Reached target paths.target - Path Units. [ 20.016254] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 20.016263] systemd[1]: Reached target slices.target - Slice Units. [ 20.016289] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 20.017398] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 20.018070] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 20.018124] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 20.018184] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 20.018257] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 20.018294] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 20.018307] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 20.018368] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 20.018411] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 20.019248] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 20.019790] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 20.020558] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 20.023734] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 20.026087] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 20.029601] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 20.030864] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 20.032003] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 20.035129] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 20.040890] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 20.041003] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 20.041059] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 20.042809] systemd[1]: Starting systemd-journald.service - Journal Service... [ 20.044319] pstore: Using crash dump compression: deflate [ 20.044907] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 20.044933] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 20.047107] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 20.047175] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 20.050287] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 20.053915] pstore: Registered efi_pstore as persistent store backend [ 20.055236] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 20.057893] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 20.058090] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 20.058367] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 20.058954] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 20.059074] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 20.059352] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 20.060459] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 20.060813] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 20.061250] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 20.061419] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 20.062308] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 20.062551] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 20.062844] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 20.063009] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 20.064518] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 20.066336] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 20.068803] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 20.069618] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 20.072225] lp: driver loaded but no devices found [ 20.076192] systemd-journald[403]: Collecting audit messages is disabled. [ 20.077239] ppdev: user-space parallel port driver [ 20.077824] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 20.078605] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 20.089852] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 20.091056] EXT4-fs (dm-0): re-mounted 32e29882-d94d-4a92-9ee4-4d03002bfa29 r/w. Quota mode: none. [ 20.091381] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 20.092171] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 20.092451] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 20.092791] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 20.092848] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 20.098118] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 20.098183] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 20.099051] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 20.099074] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 20.107205] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 20.109188] systemd[1]: Started systemd-journald.service - Journal Service. [ 20.160065] systemd-journald[403]: Received client request to flush runtime journal. [ 20.282968] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input9 [ 20.291343] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found [ 20.291416] ACPI: AC: AC Adapter [AC] (on-line) [ 20.314029] ACPI: button: Lid Switch [LID0] [ 20.314092] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10 [ 20.314676] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input11 [ 20.317324] Consider using thermal netlink events interface [ 20.321468] ACPI: battery: Slot [BAT0] (battery present) [ 20.332465] input: Intel HID events as /devices/platform/INT33D5:00/input/input12 [ 20.343678] Adding 8387904k swap on /dev/nvme0n1p4. Priority:-2 extents:1 across:8387904k SS [ 20.358720] intel_pmc_core INT33A1:00: initialized [ 20.367542] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 20.370373] input: DLL075B:01 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input14 [ 20.376022] ACPI: button: Power Button [PBTN] [ 20.376099] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input17 [ 20.383828] intel-hid INT33D5:00: platform supports 5 button array [ 20.384031] intel_rapl_common: Found RAPL domain package [ 20.384034] intel_rapl_common: Found RAPL domain dram [ 20.385330] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input18 [ 20.385442] ACPI: button: Sleep Button [SBTN] [ 20.385455] input: DLL075B:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL075B:01/0018:06CB:76AF.0001/input/input15 [ 20.385509] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input19 [ 20.399451] ACPI: button: Power Button [PWRF] [ 20.406289] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL075B:01 06CB:76AF] on i2c-DLL075B:01 [ 20.426818] Bluetooth: Core ver 2.22 [ 20.426836] NET: Registered PF_BLUETOOTH protocol family [ 20.426837] Bluetooth: HCI device and connection manager initialized [ 20.426841] Bluetooth: HCI socket layer initialized [ 20.426843] Bluetooth: L2CAP socket layer initialized [ 20.426847] Bluetooth: SCO socket layer initialized [ 20.429097] iTCO_vendor_support: vendor-support=0 [ 20.431856] mc: Linux media interface: v0.10 [ 20.434115] input: PC Speaker as /devices/platform/pcspkr/input/input20 [ 20.441564] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 20.443680] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 20.463213] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 20.519106] videodev: Linux video capture interface: v2.00 [ 20.554852] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 20.605243] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 20.605249] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 20.605250] RAPL PMU: hw unit of domain package 2^-14 Joules [ 20.605251] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 20.605253] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 20.605254] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 20.610382] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.610589] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 20.610818] usbcore: registered new interface driver btusb [ 20.613305] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 20.615193] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 20.615199] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 20.620221] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input21 [ 20.621709] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input22 [ 20.622118] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c) [ 20.635219] intel_rapl_common: Found RAPL domain package [ 20.635228] intel_rapl_common: Found RAPL domain core [ 20.635230] intel_rapl_common: Found RAPL domain uncore [ 20.635231] intel_rapl_common: Found RAPL domain dram [ 20.635233] intel_rapl_common: Found RAPL domain psys [ 20.635481] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input23 [ 20.635730] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:2234.0002/input/input24 [ 20.635945] hid-multitouch 0003:04F3:2234.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0 [ 20.784690] usbcore: registered new interface driver uvcvideo [ 20.980093] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 21.007666] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 21.068589] stackdepot: allocating hash table of 1048576 entries via kvcalloc [ 21.072307] i915 0000:00:02.0: [drm] Found KABYLAKE/ULT (device ID 5916) display version 9.00 [ 21.073833] Console: switching to colour dummy device 80x25 [ 21.073888] i915 0000:00:02.0: vgaarb: deactivate vga console [ 21.074962] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 21.091318] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 21.093859] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 21.100369] EXT4-fs (nvme0n1p2): mounted filesystem 2d23fd4c-5d03-4e1a-8a42-0e859d1f00d8 r/w with ordered data mode. Quota mode: none. [ 21.159007] ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002) [ 21.161134] ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 21.231443] audit: type=1400 audit(1722751048.393:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=561 comm="apparmor_parser" [ 21.232464] audit: type=1400 audit(1722751048.393:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=562 comm="apparmor_parser" [ 21.232469] audit: type=1400 audit(1722751048.393:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=562 comm="apparmor_parser" [ 21.238827] audit: type=1400 audit(1722751048.401:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=567 comm="apparmor_parser" [ 21.238832] audit: type=1400 audit(1722751048.401:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=567 comm="apparmor_parser" [ 21.238834] audit: type=1400 audit(1722751048.401:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=567 comm="apparmor_parser" [ 21.245256] audit: type=1400 audit(1722751048.405:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp" pid=568 comm="apparmor_parser" [ 21.245261] audit: type=1400 audit(1722751048.405:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="msmtp//helpers" pid=568 comm="apparmor_parser" [ 21.247618] audit: type=1400 audit(1722751048.409:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=570 comm="apparmor_parser" [ 21.247627] audit: type=1400 audit(1722751048.409:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser" [ 21.460659] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 [ 21.460666] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 21.461578] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 [ 21.541839] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 21.638711] ath10k_pci 0000:3a:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 21.688391] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 21.705728] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 21.719334] ath: EEPROM regdomain: 0x6c [ 21.719339] ath: EEPROM indicates we should expect a direct regpair map [ 21.719340] ath: Country alpha2 being used: 00 [ 21.719342] ath: Regpair used: 0x6c [ 21.722020] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 21.722322] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0 [ 21.725921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26 [ 21.746204] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 21.767061] fbcon: i915drmfb (fb0) is primary device [ 21.771309] Console: switching to colour frame buffer device 200x56 [ 21.795057] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 21.837532] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 21.837540] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.837543] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 21.837545] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 21.837547] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 21.837549] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 21.837551] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 21.837553] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 21.906846] Initializing XFRM netlink socket [ 21.911619] PPP generic driver version 2.4.2 [ 21.912682] NET: Registered PF_PPPOX protocol family [ 21.915123] IPsec XFRM device driver [ 21.924338] l2tp_core: L2TP core driver, V2.0 [ 21.925112] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 21.925173] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 21.925224] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 21.925272] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 21.925318] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 21.927413] l2tp_netlink: L2TP netlink interface [ 21.931082] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 24.281403] rfkill: input handler disabled [ 30.886327] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port [ 30.886361] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 30.886371] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 30.886382] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 30.886394] pci 0000:01:00.0: enabling Extended Tags [ 30.887056] pci 0000:01:00.0: supports D1 D2 [ 30.887059] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.887140] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 30.951548] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 30.951586] pci 0000:02:00.0: PCI bridge to [bus 03] [ 30.951598] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 30.951625] pci 0000:02:00.0: enabling Extended Tags [ 30.951733] pci 0000:02:00.0: supports D1 D2 [ 30.951734] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.952293] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 30.952331] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 30.952342] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 30.952355] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 30.952371] pci 0000:02:01.0: enabling Extended Tags [ 30.952485] pci 0000:02:01.0: supports D1 D2 [ 30.952487] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.952778] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 30.952814] pci 0000:02:02.0: PCI bridge to [bus 39] [ 30.952824] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 30.952850] pci 0000:02:02.0: enabling Extended Tags [ 30.952955] pci 0000:02:02.0: supports D1 D2 [ 30.952957] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.953626] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 30.953694] pci 0000:02:00.0: PCI bridge to [bus 03] [ 30.953756] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 30.953865] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint [ 30.953889] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff] [ 30.953965] pci 0000:39:00.0: enabling Extended Tags [ 30.954116] pci 0000:39:00.0: supports D1 D2 [ 30.954118] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 30.954227] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 30.954884] pci 0000:02:02.0: PCI bridge to [bus 39] [ 30.954929] pci_bus 0000:02: Allocating resources [ 30.954945] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 30.954950] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 30.954952] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 30.954956] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 30.954961] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 30.954963] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 30.954966] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 30.954967] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 30.954971] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 30.954973] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 30.954975] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 30.954977] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 30.954978] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 30.954980] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 30.954982] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 30.954984] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 30.954985] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 30.954987] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 30.954988] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 30.954990] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 30.954992] pci 0000:02:00.0: PCI bridge to [bus 03] [ 30.954997] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 30.955006] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 30.955011] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 30.955015] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 30.955022] pci 0000:02:02.0: PCI bridge to [bus 39] [ 30.955026] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 30.955035] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 30.955040] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 30.955044] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 30.956795] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 30.956803] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 30.957922] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 30.958401] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 30.958406] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 30.958411] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 30.958508] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 30.958512] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.958514] usb usb3: Product: xHCI Host Controller [ 30.958515] usb usb3: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 30.958517] usb usb3: SerialNumber: 0000:39:00.0 [ 30.958654] hub 3-0:1.0: USB hub found [ 30.958664] hub 3-0:1.0: 2 ports detected [ 30.959203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 30.959207] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 30.959209] usb usb4: Product: xHCI Host Controller [ 30.959211] usb usb4: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 30.959213] usb usb4: SerialNumber: 0000:39:00.0 [ 30.959363] hub 4-0:1.0: USB hub found [ 30.959373] hub 4-0:1.0: 2 ports detected [ 30.978250] pci_bus 0000:02: Allocating resources [ 30.978268] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 30.978273] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 30.978277] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 30.978281] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 30.978285] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 30.978287] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 30.978290] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 30.978291] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 30.978296] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 30.978298] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 30.978300] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 30.978301] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 30.978303] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 30.978305] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 30.978308] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 30.978310] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 30.978312] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 30.978314] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 30.978316] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 30.978317] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 31.214162] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 31.365902] usb 3-1: New USB device found, idVendor=2109, idProduct=2820, bcdDevice= 9.f3 [ 31.365911] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 31.365914] usb 3-1: Product: USB2.0 Hub [ 31.365916] usb 3-1: Manufacturer: VIA Labs, Inc. [ 31.367043] hub 3-1:1.0: USB hub found [ 31.367181] hub 3-1:1.0: 5 ports detected [ 31.491289] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 31.513451] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice= 9.f3 [ 31.513456] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 31.513458] usb 4-1: Product: USB3.1 Hub [ 31.513459] usb 4-1: Manufacturer: VIA Labs, Inc. [ 31.515223] hub 4-1:1.0: USB hub found [ 31.515399] hub 4-1:1.0: 4 ports detected [ 32.101992] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd [ 32.261552] usb 3-1.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.01 [ 32.261570] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 32.261576] usb 3-1.1: Product: DELL DA300 [ 32.261581] usb 3-1.1: Manufacturer: Bizlink [ 32.261585] usb 3-1.1: SerialNumber: MCU Ver0001 [ 32.276458] hid-generic 0003:06C4:C412.0003: hiddev1,hidraw2: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:39:00.0-1.1/input0 [ 32.334108] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 32.355184] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [ 32.355189] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 32.355191] usb 4-1.2: Product: USB 10/100/1000 LAN [ 32.355192] usb 4-1.2: Manufacturer: Realtek [ 32.355193] usb 4-1.2: SerialNumber: 001000001 [ 32.372546] usbcore: registered new device driver r8152-cfgselector [ 32.458830] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd [ 32.483355] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 18:db:f2:2d:cc:f3 [ 32.534923] r8152 4-1.2:1.0 eth0: v1.12.13 [ 32.534994] usbcore: registered new interface driver r8152 [ 32.546267] usbcore: registered new interface driver cdc_ether [ 32.547912] usbcore: registered new interface driver r8153_ecm [ 32.575821] r8152 4-1.2:1.0 enp57s0u1u2: renamed from eth0 [ 33.549368] rfkill: input handler enabled [ 36.025288] rfkill: input handler disabled [ 37.572497] r8152 4-1.2:1.0 enp57s0u1u2: carrier on [ 71.571634] usb 3-1: USB disconnect, device number 2 [ 71.571658] usb 3-1.1: USB disconnect, device number 3 [ 71.657014] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead [ 71.657026] xhci_hcd 0000:39:00.0: HC died; cleaning up [ 71.657235] r8152 4-1.2:1.0 enp57s0u1u2: Stop submitting intr, status -108 [ 71.678289] xhci_hcd 0000:39:00.0: remove, state 1 [ 71.678294] usb usb4: USB disconnect, device number 1 [ 71.766001] usb 4-1: USB disconnect, device number 2 [ 71.766007] r8152-cfgselector 4-1.2: USB disconnect, device number 3 [ 71.820402] xhci_hcd 0000:39:00.0: USB bus 4 deregistered [ 71.820412] xhci_hcd 0000:39:00.0: remove, state 1 [ 71.820415] usb usb3: USB disconnect, device number 1 [ 71.821370] xhci_hcd 0000:39:00.0: Host halt failed, -19 [ 71.821375] xhci_hcd 0000:39:00.0: Host not accessible, reset failed. [ 71.821508] xhci_hcd 0000:39:00.0: USB bus 3 deregistered [ 71.838788] pci_bus 0000:02: Allocating resources [ 71.838952] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 71.838957] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 71.838960] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 71.838964] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 71.838968] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 71.838970] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 71.838972] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 71.838974] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 71.838977] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 71.838979] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 71.838981] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 71.838982] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 71.838984] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 71.838985] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 71.838988] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 71.838990] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 71.838992] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 71.838993] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 71.838995] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 71.838996] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 76.787471] pcieport 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible [ 76.789586] pci_bus 0000:03: busn_res: [bus 03] is released [ 76.789796] pci_bus 0000:04: busn_res: [bus 04-38] is released [ 76.789918] pci_bus 0000:39: busn_res: [bus 39] is released [ 76.790529] pci_bus 0000:02: busn_res: [bus 02-39] is released [ 149.116788] PM: suspend entry (deep) [ 149.124120] Filesystems sync: 0.007 seconds [ 149.137643] Freezing user space processes [ 149.139451] Freezing user space processes completed (elapsed 0.001 seconds) [ 149.139461] OOM killer disabled. [ 149.139463] Freezing remaining freezable tasks [ 149.140696] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 149.140787] printk: Suspending console(s) (use no_console_suspend to debug) [ 149.185600] usb 1-3: usb suspend, wakeup 0 [ 149.185642] xhci_hcd 0000:00:14.0: Cancel URB 000000003e45896a, dev 4, ep 0x81, starting at offset 0x102ef1010 [ 149.185661] usb usb2: usb auto-resume [ 149.185664] xhci_hcd 0000:00:14.0: // Ding dong! [ 149.185736] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2 [ 149.185745] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x102ef1010 (dma) in stream 0 URB 000000003e45896a [ 149.185753] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x102ef1020, cycle 1 [ 149.185757] xhci_hcd 0000:00:14.0: // Ding dong! [ 149.185763] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000003e45896a TD as cancel_status is 2 [ 149.185770] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @102ef1020 [ 149.185775] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000003e45896a TD [ 149.185780] xhci_hcd 0000:00:14.0: Giveback URB 000000003e45896a, len = 0, expected = 116, status = -115 [ 149.185788] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 149.185810] hub 2-0:1.0: hub_resume [ 149.185816] usb 1-4: usb suspend, wakeup 0 [ 149.185840] hub 1-0:1.0: hub_suspend [ 149.185865] usb usb1: bus suspend, wakeup 0 [ 149.185894] xhci_hcd 0000:00:14.0: port 1-4 not suspended [ 149.185899] xhci_hcd 0000:00:14.0: port 1-3 not suspended [ 149.185915] xhci_hcd 0000:00:14.0: // Ding dong! [ 149.185932] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 3 [ 149.185938] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 0 [ 149.185955] xhci_hcd 0000:00:14.0: // Ding dong! [ 149.185967] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 6 [ 149.185971] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 5 [ 149.185975] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 3 [ 149.186012] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 0 [ 149.210064] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 149.210113] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 149.210145] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 149.210171] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 149.210197] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 149.210221] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 149.210249] hub 2-0:1.0: hub_suspend [ 149.210273] usb usb2: bus suspend, wakeup 0 [ 149.276529] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276851] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276863] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276873] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276883] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276890] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276898] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276903] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276911] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276915] xhci_hcd 0000:00:14.0: config port 1-7 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276920] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276925] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276930] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276935] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276941] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0x2a0, write: 0x202a0 [ 149.276946] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling. [ 149.276957] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x106fbb001 [ 149.751835] ACPI: EC: interrupt blocked [ 149.755715] xhci_hcd 0000:00:14.0: wakeup: 1 [ 149.786166] xhci_hcd 0000:00:14.0: --> PCI D3hot [ 149.786242] ACPI: PM: Preparing to enter system sleep state S3 [ 149.794633] ACPI: EC: event blocked [ 149.794636] ACPI: EC: EC stopped [ 149.794638] ACPI: PM: Saving platform NVS memory [ 149.797175] Disabling non-boot CPUs ... [ 149.798947] smpboot: CPU 3 is now offline [ 149.802553] smpboot: CPU 2 is now offline [ 149.805655] smpboot: CPU 1 is now offline [ 149.813273] ACPI: PM: Low-level resume complete [ 149.813317] ACPI: EC: EC started [ 149.813317] ACPI: PM: Restoring platform NVS memory [ 149.815136] Enabling non-boot CPUs ... [ 149.815162] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 149.815856] CPU1 is up [ 149.815871] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 149.816566] CPU2 is up [ 149.816582] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 149.817238] CPU3 is up [ 149.820056] ACPI: PM: Waking up from system sleep state S3 [ 149.849381] ACPI: EC: interrupt unblocked [ 149.877229] ACPI: EC: event unblocked [ 149.879475] xhci_hcd 0000:00:14.0: // Setting command ring address to 0x106fbb001 [ 149.879684] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 149.879687] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x206e1 [ 149.879695] xhci_hcd 0000:00:14.0: resume root hub [ 149.879701] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 149.879710] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 149.879736] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1 [ 149.879740] xhci_hcd 0000:00:14.0: resume root hub [ 149.879743] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 149.879767] usb usb2: usb resume [ 149.879772] usb usb1: usb resume [ 149.879804] hub 2-0:1.0: hub_resume [ 149.890253] nvme nvme0: 4/0/0 default/read/poll queues [ 149.906402] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 149.906440] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 149.906475] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 149.906497] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 149.906521] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 149.906539] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 149.926393] xhci_hcd 0000:00:14.0: Set port 1-3 link state, portsc: 0x7e3, write 0x10601 [ 149.926425] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x603 [ 149.926430] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 149.926445] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x603 [ 149.926449] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 149.926498] xhci_hcd 0000:00:14.0: Underrun event on slot 1 ep 5 [ 149.926502] xhci_hcd 0000:00:14.0: Overrun event on slot 1 ep 6 [ 149.937487] hub 1-0:1.0: hub_resume [ 149.937494] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 149.937516] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100 [ 149.937532] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x603, return 0x103 [ 149.937539] usb usb1-port3: status 0103 change 0000 [ 149.937544] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x206e1, return 0x10101 [ 149.937558] usb usb1-port4: status 0101 change 0001 [ 149.937564] xhci_hcd 0000:00:14.0: clear port4 connect change, portsc: 0x6e1 [ 149.937573] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x206e1, return 0x10101 [ 149.937586] usb usb1-port5: status 0101 change 0001 [ 149.937591] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1 [ 149.937598] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 149.937624] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x2a0, return 0x100 [ 149.937650] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 149.937677] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 149.937685] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 149.937693] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 149.937700] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 150.014391] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 150.042408] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x6e1, return 0x101 [ 150.042441] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x6e1, return 0x101 [ 150.042510] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x603, return 0x103 [ 150.046395] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 150.062400] usb 1-5: Waited 0ms for CONNECT [ 150.062405] usb 1-5: finish reset-resume [ 150.062419] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0x791 [ 150.062430] usb 1-4: Waited 0ms for CONNECT [ 150.062430] usb 1-3: Waited 0ms for CONNECT [ 150.062439] usb 1-4: finish reset-resume [ 150.062439] usb 1-3: finish reset-resume [ 150.119714] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 150.119723] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.122386] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 150.130386] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 150.130415] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 150.194391] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3 [ 150.194399] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.194558] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.194567] xhci_hcd 0000:00:14.0: Successful reset device command. [ 150.194633] usb 1-5: reset high-speed USB device number 4 using xhci_hcd [ 150.194638] xhci_hcd 0000:00:14.0: Slot already in default state [ 150.195083] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 150.195551] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0xf91 [ 150.252842] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 150.252851] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.262416] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 150.262442] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 150.322419] xhci_hcd 0000:00:14.0: Resetting device with slot ID 3 [ 150.322423] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.322432] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.322443] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 3) in default state [ 150.322445] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 150.322450] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.322471] xhci_hcd 0000:00:14.0: Successful setup address command [ 150.322477] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000107418000 [ 150.322479] xhci_hcd 0000:00:14.0: Slot ID 3 dcbaa entry @0000000073bee17d = 0x00000102ef5000 [ 150.322482] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x102ef5000 [ 150.322483] xhci_hcd 0000:00:14.0: Internal device address = 3 [ 150.349025] xhci_hcd 0000:00:14.0: set port reset, actual port 1-3 status = 0x791 [ 150.397009] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000773ec147 [ 150.397012] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000773ec147 [ 150.397016] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 3, new drop flags = 0x0, new add flags = 0x80 [ 150.397019] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 3, new drop flags = 0x0, new add flags = 0xa0 [ 150.397021] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000773ec147 [ 150.397023] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.397238] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 150.398613] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 00000000773ec147 [ 150.398622] xhci_hcd 0000:00:14.0: drop ep 0x82, slot id 3, new drop flags = 0x20, new add flags = 0x0 [ 150.398626] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 3, new drop flags = 0x20, new add flags = 0x20 [ 150.398628] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 00000000773ec147 [ 150.398630] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.398843] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 150.406319] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200603 [ 150.406324] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.414422] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200603, return 0x100103 [ 150.414450] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x603 [ 150.474375] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 150.474378] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.474533] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.474537] xhci_hcd 0000:00:14.0: Successful reset device command. [ 150.474599] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 150.474601] xhci_hcd 0000:00:14.0: Slot already in default state [ 150.474686] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 150.474731] xhci_hcd 0000:00:14.0: set port reset, actual port 1-3 status = 0x791 [ 150.510387] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 150.532023] xhci_hcd 0000:00:14.0: Port change event, 1-3, id 3, portsc: 0x200603 [ 150.532028] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.542382] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x200603, return 0x100103 [ 150.542392] xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x603 [ 150.602387] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 150.602392] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.602405] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.602412] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state [ 150.602414] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 150.602419] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.602483] xhci_hcd 0000:00:14.0: Successful setup address command [ 150.602489] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000107418000 [ 150.602501] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @000000000132513d = 0x000001074ee000 [ 150.602505] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x1074ee000 [ 150.602508] xhci_hcd 0000:00:14.0: Internal device address = 1 [ 150.622743] xhci_hcd 0000:00:14.0: set port reset, actual port 1-4 status = 0x791 [ 150.623007] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000016ea26f4 [ 150.623011] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000016ea26f4 [ 150.623014] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000016ea26f4 [ 150.623016] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000016ea26f4 [ 150.623025] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000016ea26f4 [ 150.623030] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8 [ 150.623036] xhci_hcd 0000:00:14.0: add ep 0x82, slot id 1, new drop flags = 0x0, new add flags = 0x28 [ 150.623041] xhci_hcd 0000:00:14.0: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x38 [ 150.623054] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0xb8 [ 150.623059] xhci_hcd 0000:00:14.0: add ep 0x3, slot id 1, new drop flags = 0x0, new add flags = 0xf8 [ 150.623061] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0000000016ea26f4 [ 150.623065] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.623247] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 150.623549] btusb 1-3:1.0: no reset_resume for driver btusb? [ 150.623552] btusb 1-3:1.1: no reset_resume for driver btusb? [ 150.623555] btusb 1-3:1.0: forced unbind [ 150.680042] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200603 [ 150.680050] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.690389] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200603, return 0x100103 [ 150.690459] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0x603 [ 150.750383] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2 [ 150.750389] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.750541] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.750550] xhci_hcd 0000:00:14.0: Successful reset device command. [ 150.750608] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [ 150.750612] xhci_hcd 0000:00:14.0: Slot already in default state [ 150.750764] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 150.750783] xhci_hcd 0000:00:14.0: set port reset, actual port 1-4 status = 0x791 [ 150.758391] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 150.808076] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x200603 [ 150.808083] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 150.818434] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x200603, return 0x100103 [ 150.818467] xhci_hcd 0000:00:14.0: clear port4 reset change, portsc: 0x603 [ 150.878429] xhci_hcd 0000:00:14.0: Resetting device with slot ID 2 [ 150.878438] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.878456] xhci_hcd 0000:00:14.0: Completed reset device command. [ 150.878467] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 2) in default state [ 150.878471] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 150.878478] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.878572] xhci_hcd 0000:00:14.0: Successful setup address command [ 150.878579] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x00000107418000 [ 150.878583] xhci_hcd 0000:00:14.0: Slot ID 2 dcbaa entry @00000000560107c1 = 0x0000010751c000 [ 150.878587] xhci_hcd 0000:00:14.0: Output Context DMA address = 0x10751c000 [ 150.878591] xhci_hcd 0000:00:14.0: Internal device address = 2 [ 150.898969] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000085cc6fb4 [ 150.898976] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 0000000085cc6fb4 [ 150.898982] xhci_hcd 0000:00:14.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8 [ 150.898989] xhci_hcd 0000:00:14.0: add ep 0x2, slot id 2, new drop flags = 0x0, new add flags = 0x18 [ 150.898992] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0000000085cc6fb4 [ 150.898997] xhci_hcd 0000:00:14.0: // Ding dong! [ 150.899221] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 150.906979] OOM killer enabled. [ 150.906982] Restarting tasks ... [ 150.907012] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 150.907031] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0000 [ 150.907828] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-1 status = 0xe0002a0 [ 150.907873] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-2 status = 0xe0002a0 [ 150.907891] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-3 status = 0xe0002a0 [ 150.907907] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-4 status = 0xe0002a0 [ 150.907935] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-5 status = 0xe0002a0 [ 150.908050] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-6 status = 0xe0002a0 [ 150.908197] hub 2-0:1.0: hub_suspend [ 150.908218] usb usb2: bus auto-suspend, wakeup 1 [ 150.908239] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 150.908697] done. [ 150.908709] random: crng reseeded on system resumption [ 150.964520] PM: suspend exit [ 151.006398] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 151.014465] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 151.107320] btusb 1-3:1.0: usb_probe_interface [ 151.107325] btusb 1-3:1.0: usb_probe_interface - got id [ 151.107839] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 151.163634] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.164648] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.165638] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.166639] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 4 bytes untransferred [ 151.171635] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.172635] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.173637] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.174639] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.176631] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 16 bytes untransferred [ 151.177647] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 3 bytes untransferred [ 151.178640] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 7 bytes untransferred [ 151.194641] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.195638] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 8 bytes untransferred [ 151.196637] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.197639] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 6 bytes untransferred [ 151.198639] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.199649] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.200635] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 7 bytes untransferred [ 151.201643] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.202640] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.203641] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 6 bytes untransferred [ 151.204635] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.205630] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 6 bytes untransferred [ 151.206640] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.208634] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 16 bytes untransferred [ 151.209638] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.210637] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.211634] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.212637] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.213643] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 9 bytes untransferred [ 151.214637] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.215660] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.216642] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 2 bytes untransferred [ 151.217639] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 6 bytes untransferred [ 151.218642] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 8 bytes untransferred [ 151.219641] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 6 bytes untransferred [ 151.220640] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 3 bytes untransferred [ 151.221642] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.277634] xhci_hcd 0000:00:14.0: ep 0x81 - asked for 16 bytes, 10 bytes untransferred [ 151.277734] xhci_hcd 0000:00:14.0: Cancel URB 00000000c8c67a31, dev 3, ep 0x81, starting at offset 0x1075223c0 [ 151.277744] xhci_hcd 0000:00:14.0: // Ding dong! [ 151.277754] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 2 [ 151.277758] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x1075223c0 (dma) in stream 0 URB 00000000c8c67a31 [ 151.277763] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x1075223d0, cycle 1 [ 151.277765] xhci_hcd 0000:00:14.0: // Ding dong! [ 151.277772] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c8c67a31 TD as cancel_status is 2 [ 151.277775] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @1075223d0 [ 151.277778] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c8c67a31 TD [ 151.277780] xhci_hcd 0000:00:14.0: Giveback URB 00000000c8c67a31, len = 0, expected = 16, status = -115 [ 151.277783] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 151.277858] xhci_hcd 0000:00:14.0: Cancel URB 0000000017639951, dev 3, ep 0x82, starting at offset 0x107520010 [ 151.277865] xhci_hcd 0000:00:14.0: // Ding dong! [ 151.277875] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 4 [ 151.277877] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x107520010 (dma) in stream 0 URB 0000000017639951 [ 151.277880] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 0000000017639951 TD [ 151.277938] xhci_hcd 0000:00:14.0: Cancel URB 00000000c2012df2, dev 3, ep 0x82, starting at offset 0x107520000 [ 151.277942] xhci_hcd 0000:00:14.0: // Ding dong! [ 151.277951] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 1 ep 4 [ 151.277991] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x107520000 (dma) in stream 0 URB 00000000c2012df2 [ 151.277993] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x107520010, cycle 1 [ 151.277995] xhci_hcd 0000:00:14.0: // Ding dong! [ 151.277999] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000c2012df2 TD as cancel_status is 2 [ 151.278037] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @107520010 [ 151.278039] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000c2012df2 TD [ 151.278041] xhci_hcd 0000:00:14.0: Giveback URB 00000000c2012df2, len = 0, expected = 1028, status = -115 [ 151.278044] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 151.388276] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 152.910451] xhci_hcd 0000:00:14.0: // Ding dong! [ 152.910483] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 6 [ 152.910498] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 4 [ 152.910504] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 3 ep 0 [ 152.910527] xhci_hcd 0000:00:14.0: Set port 1-5 link state, portsc: 0xe03, write 0x10e61 [ 152.930494] usb 1-5: usb auto-suspend, wakeup 0 [ 278.622771] pci 0000:01:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Upstream Port [ 278.622805] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 278.622814] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 278.622825] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 278.622838] pci 0000:01:00.0: enabling Extended Tags [ 278.623465] pci 0000:01:00.0: supports D1 D2 [ 278.623468] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 278.623545] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 278.689235] pci 0000:02:00.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 278.689274] pci 0000:02:00.0: PCI bridge to [bus 03] [ 278.689284] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 278.689312] pci 0000:02:00.0: enabling Extended Tags [ 278.689417] pci 0000:02:00.0: supports D1 D2 [ 278.689419] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 278.690277] pci 0000:02:01.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 278.690314] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 278.690325] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 278.690338] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 278.690354] pci 0000:02:01.0: enabling Extended Tags [ 278.690474] pci 0000:02:01.0: supports D1 D2 [ 278.690476] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 278.690740] pci 0000:02:02.0: [8086:1576] type 01 class 0x060400 PCIe Switch Downstream Port [ 278.690777] pci 0000:02:02.0: PCI bridge to [bus 39] [ 278.690787] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 278.690814] pci 0000:02:02.0: enabling Extended Tags [ 278.690921] pci 0000:02:02.0: supports D1 D2 [ 278.690923] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 278.691319] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 278.691385] pci 0000:02:00.0: PCI bridge to [bus 03] [ 278.691448] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 278.691558] pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330 PCIe Endpoint [ 278.691583] pci 0000:39:00.0: BAR 0 [mem 0xd9f00000-0xd9f0ffff] [ 278.691661] pci 0000:39:00.0: enabling Extended Tags [ 278.691788] pci 0000:39:00.0: supports D1 D2 [ 278.691790] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 278.691896] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 278.694015] pci 0000:02:02.0: PCI bridge to [bus 39] [ 278.694062] pci_bus 0000:02: Allocating resources [ 278.694078] pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 278.694082] pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 278.694084] pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 278.694089] pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 278.694092] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 278.694094] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 278.694097] pci 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 278.694098] pci 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 278.694103] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 278.694105] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 278.694107] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 278.694108] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 278.694110] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 278.694112] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 278.694115] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 278.694117] pci 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 278.694119] pci 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 278.694120] pci 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 278.694122] pci 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 278.694124] pci 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 278.694126] pci 0000:02:00.0: PCI bridge to [bus 03] [ 278.694132] pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 278.694140] pci 0000:02:01.0: PCI bridge to [bus 04-38] [ 278.694145] pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff] [ 278.694150] pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 278.694156] pci 0000:02:02.0: PCI bridge to [bus 39] [ 278.694161] pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff] [ 278.694170] pci 0000:01:00.0: PCI bridge to [bus 02-39] [ 278.694175] pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff] [ 278.694179] pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref] [ 278.695169] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 278.695174] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 278.696292] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 278.696635] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 278.696641] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 278.696645] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 278.696688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11 [ 278.696691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 278.696693] usb usb3: Product: xHCI Host Controller [ 278.696694] usb usb3: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 278.696696] usb usb3: SerialNumber: 0000:39:00.0 [ 278.696861] hub 3-0:1.0: USB hub found [ 278.696872] hub 3-0:1.0: 2 ports detected [ 278.697467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11 [ 278.697471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 278.697474] usb usb4: Product: xHCI Host Controller [ 278.697475] usb usb4: Manufacturer: Linux 6.11.0-rc1-00155-g6504fb38efa6 xhci-hcd [ 278.697477] usb usb4: SerialNumber: 0000:39:00.0 [ 278.697629] hub 4-0:1.0: USB hub found [ 278.697642] hub 4-0:1.0: 2 ports detected [ 278.714777] pci_bus 0000:02: Allocating resources [ 278.714794] pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000 [ 278.714797] pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 278.714799] pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 278.714802] pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000 [ 278.714805] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 278.714806] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 278.714808] pcieport 0000:01:00.0: bridge window [io size 0x2000]: can't assign; no space [ 278.714809] pcieport 0000:01:00.0: bridge window [io size 0x2000]: failed to assign [ 278.714812] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 278.714813] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 278.714814] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 278.714815] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 278.714816] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 278.714817] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 278.714819] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 278.714820] pcieport 0000:02:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 278.714821] pcieport 0000:02:02.0: bridge window [io size 0x1000]: can't assign; no space [ 278.714822] pcieport 0000:02:02.0: bridge window [io size 0x1000]: failed to assign [ 278.714823] pcieport 0000:02:01.0: bridge window [io size 0x1000]: can't assign; no space [ 278.714824] pcieport 0000:02:01.0: bridge window [io size 0x1000]: failed to assign [ 278.950473] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 279.102759] usb 3-1: New USB device found, idVendor=2109, idProduct=2820, bcdDevice= 9.f3 [ 279.102765] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 279.102767] usb 3-1: Product: USB2.0 Hub [ 279.102768] usb 3-1: Manufacturer: VIA Labs, Inc. [ 279.104220] hub 3-1:1.0: USB hub found [ 279.104516] hub 3-1:1.0: 5 ports detected [ 279.227919] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 279.252719] usb 4-1: New USB device found, idVendor=2109, idProduct=0820, bcdDevice= 9.f3 [ 279.252730] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 279.252735] usb 4-1: Product: USB3.1 Hub [ 279.252739] usb 4-1: Manufacturer: VIA Labs, Inc. [ 279.256212] hub 4-1:1.0: USB hub found [ 279.256399] hub 4-1:1.0: 4 ports detected [ 279.818728] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd [ 279.972843] usb 3-1.1: New USB device found, idVendor=06c4, idProduct=c412, bcdDevice= 0.01 [ 279.972851] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 279.972853] usb 3-1.1: Product: DELL DA300 [ 279.972855] usb 3-1.1: Manufacturer: Bizlink [ 279.972857] usb 3-1.1: SerialNumber: MCU Ver0001 [ 279.983186] hid-generic 0003:06C4:C412.0004: hiddev1,hidraw2: USB HID v1.11 Device [Bizlink DELL DA300] on usb-0000:39:00.0-1.1/input0 [ 280.046816] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 280.067781] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [ 280.067789] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 280.067792] usb 4-1.2: Product: USB 10/100/1000 LAN [ 280.067794] usb 4-1.2: Manufacturer: Realtek [ 280.067796] usb 4-1.2: SerialNumber: 001000001 [ 280.147542] r8152-cfgselector 4-1.2: reset SuperSpeed USB device number 3 using xhci_hcd [ 280.171882] r8152 4-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 18:db:f2:2d:cc:f3 [ 280.220213] r8152 4-1.2:1.0 eth0: v1.12.13 [ 280.250067] r8152 4-1.2:1.0 enp57s0u1u2: renamed from eth0 [ 282.907090] r8152 4-1.2:1.0 enp57s0u1u2: carrier on [ 3124.804999] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
On Sun, Aug 04, 2024 at 09:15:34AM +0200, Paul Menzel wrote: > [To: +Heikki] > > > Dear Alan, dear Heikki, > > > Am 26.07.24 um 19:48 schrieb Alan Stern: ... > > It's probably an xHCI thing -- the hardware may stop providing power to > > the ports during S3 suspend, or something like that. The xHCI people > > may have a better idea of what's going on. > > Heikki, can you confirm this. I am attaching the logs with You should be asking Mathias, the xHCI maintainer. > echo 'file drivers/usb/* +p' | sudo tee > /sys/kernel/debug/dynamic_debug/control ... > [ 149.185600] usb 1-3: usb suspend, wakeup 0 > [ 149.185642] xhci_hcd 0000:00:14.0: Cancel URB 000000003e45896a, dev 4, ep 0x81, starting at offset 0x102ef1010 > [ 149.185661] usb usb2: usb auto-resume > [ 149.185664] xhci_hcd 0000:00:14.0: // Ding dong! > [ 149.185736] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2 > [ 149.185745] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x102ef1010 (dma) in stream 0 URB 000000003e45896a > [ 149.185753] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x102ef1020, cycle 1 > > [ 149.185757] xhci_hcd 0000:00:14.0: // Ding dong! > [ 149.185763] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000003e45896a TD as cancel_status is 2 > [ 149.185770] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @102ef1020 > [ 149.185775] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000003e45896a TD > [ 149.185780] xhci_hcd 0000:00:14.0: Giveback URB 000000003e45896a, len = 0, expected = 116, status = -115 > [ 149.185788] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell > [ 149.185810] hub 2-0:1.0: hub_resume > [ 149.185816] usb 1-4: usb suspend, wakeup 0 > [ 149.185840] hub 1-0:1.0: hub_suspend > [ 149.185865] usb usb1: bus suspend, wakeup 0 > [ 149.185894] xhci_hcd 0000:00:14.0: port 1-4 not suspended > [ 149.185899] xhci_hcd 0000:00:14.0: port 1-3 not suspended I have to wonder why xhci-hcd says ports 1-3 and 1-4 are not suspended, when only a few lines earlier the log says that devices 1-3 and 1-4 have gone into USB suspend. Alan Stern
[To: +Nicolas, Cc: -Heikki] Dear Alan, dear Nicolas, Am 04.08.24 um 09:15 schrieb Paul Menzel: > Am 26.07.24 um 19:48 schrieb Alan Stern: >> On Wed, Jul 24, 2024 at 11:00:42PM +0200, Paul Menzel wrote: > >>> Am 24.07.24 um 20:52 schrieb Alan Stern: >>>> On Wed, Jul 24, 2024 at 08:14:34PM +0200, Paul Menzel wrote: >>> >>> […] >>> >>>>> Am 24.07.24 um 16:10 schrieb Alan Stern: >>>>>> On Wed, Jul 24, 2024 at 01:15:23PM +0200, Paul Menzel wrote: >>>>>>> This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b >>>>>>> ("[PATCH] USB: relax usbcore reset timings") from 2005. >>>>>>> >>>>>>> This adds unneeded 40 ms during resume from suspend on a majority of >>>>>> >>>>>> Wrong. It adds 40 ms to the recovery time from a port reset -- see the >>>>>> commit's title. Suspend and resume do not in general involve port >>>>>> resets (although sometimes they do). […] >>>>>>> devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, >>>>>>> BIOS 2.21.0 06/02/2022 with >>>>>> >>>>>>> The commit messages unfortunately does not list the devices >>>>>>> needing this. >>>>>>> Should they surface again, these should be added to the quirk >>>>>>> list for >>>>>>> USB_QUIRK_HUB_SLOW_RESET. >>>>>> >>>>>> This quirk applies to hubs that need extra time when one of their >>>>>> ports >>>>>> gets reset. However, it seems likely that the patch you are >>>>>> reverting >>>>>> was meant to help the device attached to the port, not the hub >>>>>> itself. >>>>>> Which would mean that the adding hubs to the quirk list won't help >>>>>> unless every hub is added -- in which case there's no point reverting >>>>>> the patch. >>>>>> >>>>>> Furthermore, should any of these bad hubs or devices still be in use, >>>>>> your change would cause them to stop working reliably. It would be a >>>>>> regression. >>>>>> >>>>>> A better approach would be to add a sysfs boolean attribute to the >>>>>> hub >>>>>> driver to enable the 40-ms reset-recovery delay, and make it >>>>>> default to >>>>>> True. Then people who don't need the delay could disable it from >>>>>> userspace, say by a udev rule. >>>>> >>>>> How would you name it? >>>> >>>> You could call it "long_reset_recovery". Anything like that would be >>>> okay. >>> >>> Would it be useful to makes it an integer instead of a boolean, and >>> allow to configure the delay: `extra_reset_recovery_delay_ms`? >> >> Sure, why not? Just so long as the default value matches the current >> behavior. > > I hope, I am going to find time to take a stab at it. diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4b93c0bd1d4b..72dd16eaa73a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -120,9 +120,16 @@ MODULE_PARM_DESC(use_both_schemes, "try the other device initialization scheme if the " "first one fails"); +static int extra_reset_recovery_delay_ms = 40; +module_param(extra_reset_recovery_delay_ms, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(extra_reset_recovery_delay_ms, + "extra recovery delay for USB devices after reset in milliseconds " + "(default 40 ms"); + /* Mutual exclusion for EHCI CF initialization. This interferes with * port reset on some companion controllers. */ + DECLARE_RWSEM(ehci_cf_port_reset_rwsem); EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); @@ -3110,7 +3117,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, usleep_range(10000, 12000); else { /* TRSTRCY = 10 ms; plus some extra */ - reset_recovery_time = 10 + 40; + reset_recovery_time = 10 + extra_reset_recovery_delay_ms; /* Hub needs extra delay after resetting its port. */ if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) The if condition above if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); is from Nicholas’ commit aa071a92bbf0 (usb: hub: Per-port setting to reduce TRSTRCY to 10 ms) from 2018 [2] adding the port quirk `USB_PORT_QUIRK_FAST_ENUM`. > urrently, the USB hub core waits for 50 ms after enumerating the > device. This was added to help "some high speed devices" to > enumerate (b789696af8 "[PATCH] USB: relax usbcore reset timings"). > > On some devices, the time-to-active is important, so we provide > a per-port option to reduce the time to what the USB specification > requires: 10 ms. Nicholas, do you have field data from ChromeOS if the 40 ms delay is needed, and do you apply the quirk to all ports? Being ignorant about USB in general, does this quirk make my patch obsolete, or should I just send a patch with the diff above? Kind regards, Paul > [1]: https://lore.kernel.org/all/f1e2e2b1-b83c-4105-b62c-a053d18c2985@molgen.mpg.de/ [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aa071a92bbf09d993ff0dbf3b1f2b53ac93ad654
On 4.8.2024 16.19, Alan Stern wrote: > On Sun, Aug 04, 2024 at 09:15:34AM +0200, Paul Menzel wrote: >> [To: +Heikki] >> >> >> Dear Alan, dear Heikki, >> >> >> Am 26.07.24 um 19:48 schrieb Alan Stern: > > ... > >>> It's probably an xHCI thing -- the hardware may stop providing power to >>> the ports during S3 suspend, or something like that. The xHCI people >>> may have a better idea of what's going on. >> >> Heikki, can you confirm this. I am attaching the logs with > > You should be asking Mathias, the xHCI maintainer. > >> echo 'file drivers/usb/* +p' | sudo tee >> /sys/kernel/debug/dynamic_debug/control > > ... > >> [ 149.185600] usb 1-3: usb suspend, wakeup 0 >> [ 149.185642] xhci_hcd 0000:00:14.0: Cancel URB 000000003e45896a, dev 4, ep 0x81, starting at offset 0x102ef1010 >> [ 149.185661] usb usb2: usb auto-resume >> [ 149.185664] xhci_hcd 0000:00:14.0: // Ding dong! >> [ 149.185736] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2 >> [ 149.185745] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x102ef1010 (dma) in stream 0 URB 000000003e45896a >> [ 149.185753] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x102ef1020, cycle 1 >> >> [ 149.185757] xhci_hcd 0000:00:14.0: // Ding dong! >> [ 149.185763] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000003e45896a TD as cancel_status is 2 >> [ 149.185770] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @102ef1020 >> [ 149.185775] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000003e45896a TD >> [ 149.185780] xhci_hcd 0000:00:14.0: Giveback URB 000000003e45896a, len = 0, expected = 116, status = -115 >> [ 149.185788] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell >> [ 149.185810] hub 2-0:1.0: hub_resume >> [ 149.185816] usb 1-4: usb suspend, wakeup 0 >> [ 149.185840] hub 1-0:1.0: hub_suspend >> [ 149.185865] usb usb1: bus suspend, wakeup 0 >> [ 149.185894] xhci_hcd 0000:00:14.0: port 1-4 not suspended >> [ 149.185899] xhci_hcd 0000:00:14.0: port 1-3 not suspended > > I have to wonder why xhci-hcd says ports 1-3 and 1-4 are not suspended, > when only a few lines earlier the log says that devices 1-3 and 1-4 > have gone into USB suspend. In bus suspend xhci notices that those ports are not properly suspended. They are both in link state U0 state when they should be in U3 at this point where devices and hubs should have successfully suspended. Bus suspend will now try to set those ports to u3 Looks like at least 1-4 and 1-5 report connect status change at resume. They need to be reset to get to the enabled state [ 149.879684] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 149.879687] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x206e1 [ 149.879736] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1 ... [ 149.937564] xhci_hcd 0000:00:14.0: clear port4 connect change, portsc: 0x6e1 [ 149.937591] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1 Port Status: 0x206e1 Connected Disabled Link: Polling Powered Full Speed Connect Status Change port 1-3 seems like it resumes fine from u3 -> u0, but ends up being reset anyway during resume, didn't look into why (maybe reset_resume flag is set?) -Mathias
On Mon, Aug 05, 2024 at 10:19:17AM +0200, Paul Menzel wrote: > > > > > > > A better approach would be to add a sysfs boolean > > > > > > > attribute to the hub > > > > > > > driver to enable the 40-ms reset-recovery delay, and > > > > > > > make it default to > > > > > > > True. Then people who don't need the delay could disable it from > > > > > > > userspace, say by a udev rule. > > > > > > > > > > > > How would you name it? > > > > > > > > > > You could call it "long_reset_recovery". Anything like that would be > > > > > okay. > > > > > > > > Would it be useful to makes it an integer instead of a boolean, > > > > and allow to configure the delay: > > > > `extra_reset_recovery_delay_ms`? > > > > > > Sure, why not? Just so long as the default value matches the current > > > behavior. > > > > I hope, I am going to find time to take a stab at it. > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4b93c0bd1d4b..72dd16eaa73a 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -120,9 +120,16 @@ MODULE_PARM_DESC(use_both_schemes, > "try the other device initialization scheme if the " > "first one fails"); > > +static int extra_reset_recovery_delay_ms = 40; > +module_param(extra_reset_recovery_delay_ms, int, S_IRUGO | S_IWUSR); > +MODULE_PARM_DESC(extra_reset_recovery_delay_ms, > + "extra recovery delay for USB devices after reset in > milliseconds " > + "(default 40 ms"); This is a module parameter, not a sysfs attribute. Module parameters should be avoided if possible, because they are much less flexible than sysfs attributes. Alan Stern
Dear Mathias, Thank you for the quick reply and analysis. Am 05.08.24 um 11:17 schrieb Mathias Nyman: > On 4.8.2024 16.19, Alan Stern wrote: >> On Sun, Aug 04, 2024 at 09:15:34AM +0200, Paul Menzel wrote: […] >>> Am 26.07.24 um 19:48 schrieb Alan Stern: >> >> ... >> >>>> It's probably an xHCI thing -- the hardware may stop providing power to >>>> the ports during S3 suspend, or something like that. The xHCI people >>>> may have a better idea of what's going on. >>> >>> Heikki, can you confirm this. I am attaching the logs with >> >> You should be asking Mathias, the xHCI maintainer. >> >>> echo 'file drivers/usb/* +p' | sudo tee /sys/kernel/debug/dynamic_debug/control >> >> ... >> >>> [ 149.185600] usb 1-3: usb suspend, wakeup 0 >>> [ 149.185642] xhci_hcd 0000:00:14.0: Cancel URB 000000003e45896a, dev 4, ep 0x81, starting at offset 0x102ef1010 >>> [ 149.185661] usb usb2: usb auto-resume >>> [ 149.185664] xhci_hcd 0000:00:14.0: // Ding dong! >>> [ 149.185736] xhci_hcd 0000:00:14.0: Stopped on Transfer TRB for slot 2 ep 2 >>> [ 149.185745] xhci_hcd 0000:00:14.0: Removing canceled TD starting at 0x102ef1010 (dma) in stream 0 URB 000000003e45896a >>> [ 149.185753] xhci_hcd 0000:00:14.0: Set TR Deq ptr 0x102ef1020, cycle 1 >>> >>> [ 149.185757] xhci_hcd 0000:00:14.0: // Ding dong! >>> [ 149.185763] xhci_hcd 0000:00:14.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000003e45896a TD as cancel_status is 2 >>> [ 149.185770] xhci_hcd 0000:00:14.0: Successful Set TR Deq Ptr cmd, deq = @102ef1020 >>> [ 149.185775] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000003e45896a TD >>> [ 149.185780] xhci_hcd 0000:00:14.0: Giveback URB 000000003e45896a, len = 0, expected = 116, status = -115 >>> [ 149.185788] xhci_hcd 0000:00:14.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell >>> [ 149.185810] hub 2-0:1.0: hub_resume >>> [ 149.185816] usb 1-4: usb suspend, wakeup 0 >>> [ 149.185840] hub 1-0:1.0: hub_suspend >>> [ 149.185865] usb usb1: bus suspend, wakeup 0 >>> [ 149.185894] xhci_hcd 0000:00:14.0: port 1-4 not suspended >>> [ 149.185899] xhci_hcd 0000:00:14.0: port 1-3 not suspended >> >> I have to wonder why xhci-hcd says ports 1-3 and 1-4 are not suspended, >> when only a few lines earlier the log says that devices 1-3 and 1-4 >> have gone into USB suspend. > > In bus suspend xhci notices that those ports are not properly suspended. > They are both in link state U0 state when they should be in U3 at this > point where devices and hubs should have successfully suspended. > Bus suspend will now try to set those ports to u3 > > Looks like at least 1-4 and 1-5 report connect status change at resume. > They need to be reset to get to the enabled state > > [ 149.879684] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. > [ 149.879687] xhci_hcd 0000:00:14.0: Port change event, 1-4, id 4, portsc: 0x206e1 > [ 149.879736] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1 > ... > [ 149.937564] xhci_hcd 0000:00:14.0: clear port4 connect change, portsc: 0x6e1 > [ 149.937591] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1 > > Port Status: 0x206e1 > Connected > Disabled > Link: Polling > Powered > Full Speed > Connect Status Change > > port 1-3 seems like it resumes fine from u3 -> u0, but ends up being > reset anyway during resume, didn't look into why (maybe reset_resume > flag is set?) Is that a hardware, firmware, or something else issue? Just as another data point the logs from a Kaby Lake-R(?) Dell XPS 13 9370 (i7-8550U). First suspend with LMP USB-C mini Dock and Ethernet cable connected, the second suspend with the device unplugged. $ grep -e "Linux version" -e "DMI:" -e ': reset' 20240805–dell-xps-13-9370–linux-6.9.12–dmesg.txt [ 0.000000] Linux version 6.9.12-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.3.0-3) 13.3.0, GNU ld (GNU Binutils for Debian) 2.42.90.20240720) #1 SMP PREEMPT_DYNAMIC Debian 6.9.12-1 (2024-07-27) [ 0.000000] DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.21.0 07/06/2022 [ 11.726362] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd [ 52.215529] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 52.319498] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 52.490726] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 53.061379] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 53.161160] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 53.348471] usb 3-1.5: reset high-speed USB device number 4 using xhci_hcd [ 53.579860] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd [ 53.915600] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd [ 54.805472] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 68.034874] usb 1-5: reset high-speed USB device number 2 using xhci_hcd Kind regards, Paul [ 0.000000] Linux version 6.9.12-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-13 (Debian 13.3.0-3) 13.3.0, GNU ld (GNU Binutils for Debian) 2.42.90.20240720) #1 SMP PREEMPT_DYNAMIC Debian 6.9.12-1 (2024-07-27) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.9.12-amd64 root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep log_buf_len=8M [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002c788fff] usable [ 0.000000] BIOS-e820: [mem 0x000000002c789000-0x000000002c789fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000002c78a000-0x000000002c78afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000002c78b000-0x000000003dda6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003dda7000-0x000000003e166fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003e167000-0x000000003e1b3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003e1b4000-0x000000003e86bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003e86c000-0x000000003fffefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x21c28018-0x21c38057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000021c28017] usable [ 0.000000] reserve setup_data: [mem 0x0000000021c28018-0x0000000021c38057] usable [ 0.000000] reserve setup_data: [mem 0x0000000021c38058-0x000000002c788fff] usable [ 0.000000] reserve setup_data: [mem 0x000000002c789000-0x000000002c789fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000002c78a000-0x000000002c78afff] reserved [ 0.000000] reserve setup_data: [mem 0x000000002c78b000-0x000000003dda6fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003dda7000-0x000000003e166fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000003e167000-0x000000003e1b3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003e1b4000-0x000000003e86bfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000003e86c000-0x000000003fffefff] reserved [ 0.000000] reserve setup_data: [mem 0x000000003ffff000-0x000000003fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x0000000047ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000048000000-0x0000000048dfffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000048e00000-0x000000004f7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004ae7fffff] usable [ 0.000000] efi: EFI v2.4 by American Megatrends [ 0.000000] efi: ACPI=0x3e177000 ACPI 2.0=0x3e177000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x3e80d000 ESRT=0x3fdc1698 MEMATTR=0x3b25b018 INITRD=0x2c87ca98 TPMEventLog=0x2c874018 [ 0.000000] efi: Remove mem34: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Not removing mem35: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem37: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem38: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.21.0 07/06/2022 [ 0.000000] tsc: Detected 2000.000 MHz processor [ 0.000000] tsc: Detected 1999.968 MHz TSC [ 0.000746] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000748] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000756] last_pfn = 0x4ae800 max_arch_pfn = 0x400000000 [ 0.000759] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.000761] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001056] last_pfn = 0x48e00 max_arch_pfn = 0x400000000 [ 0.007546] esrt: Reserving ESRT space from 0x000000003fdc1698 to 0x000000003fdc16d0. [ 0.007551] Using GB pages for direct mapping [ 0.013592] printk: log_buf_len: 8388608 bytes [ 0.013593] printk: early log buf free: 125352(95%) [ 0.013594] RAMDISK: [mem 0x21c39000-0x22778fff] [ 0.013597] ACPI: Early table checksum verification disabled [ 0.013600] ACPI: RSDP 0x000000003E177000 000024 (v02 DELL ) [ 0.013604] ACPI: XSDT 0x000000003E1770C0 0000FC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013608] ACPI: FACP 0x000000003E19D9B8 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.013613] ACPI: DSDT 0x000000003E177248 02676C (v02 DELL CBX3 01072009 INTL 20160422) [ 0.013615] ACPI: FACS 0x000000003E869180 000040 [ 0.013617] ACPI: APIC 0x000000003E19DAC8 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.013620] ACPI: FPDT 0x000000003E19DB88 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013622] ACPI: FIDT 0x000000003E19DBD0 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013625] ACPI: MCFG 0x000000003E19DC80 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.013627] ACPI: HPET 0x000000003E19DCC0 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.013629] ACPI: SSDT 0x000000003E19DCF8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.013632] ACPI: BOOT 0x000000003E19E058 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.013634] ACPI: SSDT 0x000000003E19E080 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.013637] ACPI: HPET 0x000000003E19F360 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.013639] ACPI: SSDT 0x000000003E19F398 000CEF (v02 INTEL xh_rvp07 00000000 INTL 20160422) [ 0.013642] ACPI: UEFI 0x000000003E1A0088 000042 (v01 00000000 00000000) [ 0.013644] ACPI: SSDT 0x000000003E1A00D0 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.013647] ACPI: LPIT 0x000000003E1A1880 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.013649] ACPI: SSDT 0x000000003E1A1918 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.013651] ACPI: SSDT 0x000000003E1A1A80 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.013654] ACPI: SSDT 0x000000003E1A1D20 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.013656] ACPI: SSDT 0x000000003E1A4D28 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.013659] ACPI: DBGP 0x000000003E1A5240 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.013661] ACPI: DBG2 0x000000003E1A5278 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.013663] ACPI: SSDT 0x000000003E1A52D0 000801 (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.013666] ACPI: SSDT 0x000000003E1A5AD8 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.013668] ACPI: NHLT 0x000000003E1B2AA0 00002D (v00 INTEL EDK2 00000002 01000013) [ 0.013670] ACPI: BGRT 0x000000003E1B2AD0 000038 (v00 01072009 AMI 00010013) [ 0.013673] ACPI: TPM2 0x000000003E1B2B08 000034 (v03 DELL CBX3 00000001 AMI 00000000) [ 0.013676] ACPI: ASF! 0x000000003E1B2B40 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.013680] ACPI: DMAR 0x000000003E1B2BE0 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.013683] ACPI: Reserving FACP table memory at [mem 0x3e19d9b8-0x3e19dac3] [ 0.013684] ACPI: Reserving DSDT table memory at [mem 0x3e177248-0x3e19d9b3] [ 0.013685] ACPI: Reserving FACS table memory at [mem 0x3e869180-0x3e8691bf] [ 0.013685] ACPI: Reserving APIC table memory at [mem 0x3e19dac8-0x3e19db83] [ 0.013686] ACPI: Reserving FPDT table memory at [mem 0x3e19db88-0x3e19dbcb] [ 0.013687] ACPI: Reserving FIDT table memory at [mem 0x3e19dbd0-0x3e19dc7b] [ 0.013687] ACPI: Reserving MCFG table memory at [mem 0x3e19dc80-0x3e19dcbb] [ 0.013688] ACPI: Reserving HPET table memory at [mem 0x3e19dcc0-0x3e19dcf7] [ 0.013689] ACPI: Reserving SSDT table memory at [mem 0x3e19dcf8-0x3e19e050] [ 0.013689] ACPI: Reserving BOOT table memory at [mem 0x3e19e058-0x3e19e07f] [ 0.013690] ACPI: Reserving SSDT table memory at [mem 0x3e19e080-0x3e19f35d] [ 0.013691] ACPI: Reserving HPET table memory at [mem 0x3e19f360-0x3e19f397] [ 0.013691] ACPI: Reserving SSDT table memory at [mem 0x3e19f398-0x3e1a0086] [ 0.013692] ACPI: Reserving UEFI table memory at [mem 0x3e1a0088-0x3e1a00c9] [ 0.013693] ACPI: Reserving SSDT table memory at [mem 0x3e1a00d0-0x3e1a187d] [ 0.013693] ACPI: Reserving LPIT table memory at [mem 0x3e1a1880-0x3e1a1913] [ 0.013694] ACPI: Reserving SSDT table memory at [mem 0x3e1a1918-0x3e1a1a78] [ 0.013695] ACPI: Reserving SSDT table memory at [mem 0x3e1a1a80-0x3e1a1d1e] [ 0.013695] ACPI: Reserving SSDT table memory at [mem 0x3e1a1d20-0x3e1a4d21] [ 0.013696] ACPI: Reserving SSDT table memory at [mem 0x3e1a4d28-0x3e1a523e] [ 0.013696] ACPI: Reserving DBGP table memory at [mem 0x3e1a5240-0x3e1a5273] [ 0.013697] ACPI: Reserving DBG2 table memory at [mem 0x3e1a5278-0x3e1a52cb] [ 0.013698] ACPI: Reserving SSDT table memory at [mem 0x3e1a52d0-0x3e1a5ad0] [ 0.013698] ACPI: Reserving SSDT table memory at [mem 0x3e1a5ad8-0x3e1b2a9a] [ 0.013699] ACPI: Reserving NHLT table memory at [mem 0x3e1b2aa0-0x3e1b2acc] [ 0.013700] ACPI: Reserving BGRT table memory at [mem 0x3e1b2ad0-0x3e1b2b07] [ 0.013700] ACPI: Reserving TPM2 table memory at [mem 0x3e1b2b08-0x3e1b2b3b] [ 0.013701] ACPI: Reserving ASF! table memory at [mem 0x3e1b2b40-0x3e1b2bdf] [ 0.013702] ACPI: Reserving DMAR table memory at [mem 0x3e1b2be0-0x3e1b2ccf] [ 0.013822] No NUMA configuration found [ 0.013823] Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff] [ 0.013829] NODE_DATA(0) allocated [mem 0x4ac3d5000-0x4ac3fffff] [ 0.013958] Zone ranges: [ 0.013959] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.013961] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.013962] Normal [mem 0x0000000100000000-0x00000004ae7fffff] [ 0.013963] Device empty [ 0.013964] Movable zone start for each node [ 0.013966] Early memory node ranges [ 0.013966] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.013968] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.013968] node 0: [mem 0x0000000000100000-0x000000002c788fff] [ 0.013969] node 0: [mem 0x000000002c78b000-0x000000003dda6fff] [ 0.013970] node 0: [mem 0x000000003ffff000-0x000000003fffffff] [ 0.013971] node 0: [mem 0x0000000048000000-0x0000000048dfffff] [ 0.013971] node 0: [mem 0x0000000100000000-0x00000004ae7fffff] [ 0.013973] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff] [ 0.013976] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013978] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013999] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.015339] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.015406] On node 0, zone DMA32: 8792 pages in unavailable ranges [ 0.015868] On node 0, zone Normal: 29184 pages in unavailable ranges [ 0.015917] On node 0, zone Normal: 6144 pages in unavailable ranges [ 0.015925] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff] [ 0.016196] ACPI: PM-Timer IO Port: 0x1808 [ 0.016202] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.016204] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.016204] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.016205] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.016206] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.016206] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.016207] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.016207] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.016234] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.016236] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.016237] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.016241] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.016242] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.016247] e820: update [mem 0x3a3c5000-0x3a438fff] usable ==> reserved [ 0.016256] TSC deadline timer available [ 0.016260] CPU topo: Max. logical packages: 1 [ 0.016261] CPU topo: Max. logical dies: 1 [ 0.016261] CPU topo: Max. dies per package: 1 [ 0.016265] CPU topo: Max. threads per core: 2 [ 0.016266] CPU topo: Num. cores per package: 4 [ 0.016266] CPU topo: Num. threads per package: 8 [ 0.016267] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.016281] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.016283] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.016284] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.016286] PM: hibernation: Registered nosave memory: [mem 0x21c28000-0x21c28fff] [ 0.016287] PM: hibernation: Registered nosave memory: [mem 0x21c38000-0x21c38fff] [ 0.016288] PM: hibernation: Registered nosave memory: [mem 0x2c789000-0x2c789fff] [ 0.016289] PM: hibernation: Registered nosave memory: [mem 0x2c78a000-0x2c78afff] [ 0.016290] PM: hibernation: Registered nosave memory: [mem 0x3a3c5000-0x3a438fff] [ 0.016292] PM: hibernation: Registered nosave memory: [mem 0x3dda7000-0x3e166fff] [ 0.016292] PM: hibernation: Registered nosave memory: [mem 0x3e167000-0x3e1b3fff] [ 0.016293] PM: hibernation: Registered nosave memory: [mem 0x3e1b4000-0x3e86bfff] [ 0.016293] PM: hibernation: Registered nosave memory: [mem 0x3e86c000-0x3fffefff] [ 0.016295] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x47ffffff] [ 0.016296] PM: hibernation: Registered nosave memory: [mem 0x48e00000-0x4f7fffff] [ 0.016297] PM: hibernation: Registered nosave memory: [mem 0x4f800000-0xfdffffff] [ 0.016297] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.016298] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.016299] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.016299] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.016300] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.016300] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.016304] [mem 0x4f800000-0xfdffffff] available for PCI devices [ 0.016307] Booting paravirtualized kernel on bare hardware [ 0.016311] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.021003] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.021539] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288 [ 0.021545] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152 [ 0.021546] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.021565] Kernel command line: BOOT_IMAGE=/vmlinuz-6.9.12-amd64 root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep log_buf_len=8M [ 0.021629] Unknown kernel command line parameters "noisapnp BOOT_IMAGE=/vmlinuz-6.9.12-amd64", will be passed to user space. [ 0.021653] random: crng init done [ 0.023081] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.023800] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.023907] Fallback order for Node 0: 0 [ 0.023909] Built 1 zonelists, mobility grouping on. Total pages: 4052823 [ 0.023910] Policy zone: Normal [ 0.023915] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.023921] software IO TLB: area num 8. [ 0.040258] Memory: 1034424K/16469256K available (16384K kernel code, 2405K rwdata, 10932K rodata, 4072K init, 5408K bss, 493544K reserved, 0K cma-reserved) [ 0.040449] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.040470] Kernel/User page tables isolation: enabled [ 0.040496] ftrace: allocating 44130 entries in 173 pages [ 0.047329] ftrace: allocated 173 pages with 5 groups [ 0.047854] Dynamic Preempt: voluntary [ 0.047891] rcu: Preemptible hierarchical RCU implementation. [ 0.047892] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.047893] Trampoline variant of Tasks RCU enabled. [ 0.047894] Rude variant of Tasks RCU enabled. [ 0.047894] Tracing variant of Tasks RCU enabled. [ 0.047895] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.047895] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.047900] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.047901] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.047902] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.050164] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.050370] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.050549] spurious 8259A interrupt: IRQ7. [ 0.050581] Console: colour dummy device 80x25 [ 0.050583] printk: legacy console [tty0] enabled [ 0.050618] ACPI: Core revision 20230628 [ 0.050756] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.050757] APIC: Switch to symmetric I/O mode setup [ 0.050759] DMAR: Host address width 39 [ 0.050760] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.050765] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.050767] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.050771] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.050773] DMAR: RMRR base: 0x0000003de81000 end: 0x0000003dea0fff [ 0.050774] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff [ 0.050775] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.050776] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.050778] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.050779] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.050780] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.052392] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.052393] x2apic enabled [ 0.052444] APIC: Switched APIC routing to: cluster x2apic [ 0.056494] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns [ 0.056499] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872) [ 0.056525] CPU0: Thermal monitoring enabled (TM1) [ 0.056561] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.056562] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.056566] process: using mwait in idle threads [ 0.056569] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.056570] Spectre V2 : Mitigation: IBRS [ 0.056571] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.056572] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.056573] RETBleed: Mitigation: IBRS [ 0.056574] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.056575] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.056576] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.056581] MDS: Mitigation: Clear CPU buffers [ 0.056582] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.056584] SRBDS: Mitigation: Microcode [ 0.056589] GDS: Mitigation: Microcode [ 0.056597] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.056599] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.056600] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.056601] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.056602] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.056603] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.056605] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.056606] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.056607] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.060497] Freeing SMP alternatives memory: 36K [ 0.060497] pid_max: default: 32768 minimum: 301 [ 0.060497] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ima,evm [ 0.060497] landlock: Up and running. [ 0.060497] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.060497] AppArmor: AppArmor initialized [ 0.060497] TOMOYO Linux initialized [ 0.060497] LSM support for eBPF active [ 0.060497] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.060497] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.060497] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.060497] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.060497] ... version: 4 [ 0.060497] ... bit width: 48 [ 0.060497] ... generic registers: 4 [ 0.060497] ... value mask: 0000ffffffffffff [ 0.060497] ... max period: 00007fffffffffff [ 0.060497] ... fixed-purpose events: 3 [ 0.060497] ... event mask: 000000070000000f [ 0.060497] signal: max sigframe size: 2032 [ 0.060497] Estimated ratio of average max frequency by base frequency (times 1024): 1894 [ 0.060497] rcu: Hierarchical SRCU implementation. [ 0.060497] rcu: Max phase no-delay instances is 1000. [ 0.060497] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.060497] smp: Bringing up secondary CPUs ... [ 0.060497] smpboot: x86: Booting SMP configuration: [ 0.060497] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.060497] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.060497] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.060497] smp: Brought up 1 node, 8 CPUs [ 0.060497] smpboot: Total of 8 processors activated (31999.48 BogoMIPS) [ 0.079384] node 0 deferred pages initialised in 16ms [ 0.079384] devtmpfs: initialized [ 0.079384] x86/mm: Memory block size: 128MB [ 0.081813] ACPI: PM: Registering ACPI NVS region [mem 0x2c789000-0x2c789fff] (4096 bytes) [ 0.081813] ACPI: PM: Registering ACPI NVS region [mem 0x3e1b4000-0x3e86bfff] (7045120 bytes) [ 0.081813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.081813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.081813] pinctrl core: initialized pinctrl subsystem [ 0.081813] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.081813] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.081813] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.081813] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.081813] audit: initializing netlink subsys (disabled) [ 0.081813] audit: type=2000 audit(1722870156.024:1): state=initialized audit_enabled=0 res=1 [ 0.081813] thermal_sys: Registered thermal governor 'fair_share' [ 0.081813] thermal_sys: Registered thermal governor 'bang_bang' [ 0.081813] thermal_sys: Registered thermal governor 'step_wise' [ 0.081813] thermal_sys: Registered thermal governor 'user_space' [ 0.081813] thermal_sys: Registered thermal governor 'power_allocator' [ 0.081813] cpuidle: using governor ladder [ 0.081813] cpuidle: using governor menu [ 0.081813] Simple Boot Flag at 0x47 set to 0x80 [ 0.081813] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.081813] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.081813] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.081813] PCI: Using configuration type 1 for base access [ 0.081813] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.081813] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.081813] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.081813] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.081813] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.081813] Demotion targets for Node 0: null [ 0.081813] ACPI: Added _OSI(Module Device) [ 0.081813] ACPI: Added _OSI(Processor Device) [ 0.081813] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.081813] ACPI: Added _OSI(Processor Aggregator Device) [ 0.112498] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.174687] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.179288] ACPI: Dynamic OEM Table Load: [ 0.179288] ACPI: SSDT 0xFFFF95AE5C2CF800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.180928] ACPI: Dynamic OEM Table Load: [ 0.180933] ACPI: SSDT 0xFFFF95AAC10C5000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.182437] ACPI: Dynamic OEM Table Load: [ 0.182442] ACPI: SSDT 0xFFFF95AAC0196000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.183755] ACPI: Dynamic OEM Table Load: [ 0.183759] ACPI: SSDT 0xFFFF95AAC10CC400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.184629] ACPI: Dynamic OEM Table Load: [ 0.184634] ACPI: SSDT 0xFFFF95AAC10CE400 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.189077] ACPI: _OSC evaluated successfully for all CPUs [ 0.189150] ACPI: EC: EC started [ 0.189151] ACPI: EC: interrupt blocked [ 0.197058] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.197061] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.197063] ACPI: Interpreter enabled [ 0.197095] ACPI: PM: (supports S0 S3 S4 S5) [ 0.197096] ACPI: Using IOAPIC for interrupt routing [ 0.197125] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.197127] PCI: Using E820 reservations for host bridge windows [ 0.197574] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.210434] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.232259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.232265] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.232392] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] [ 0.232608] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] [ 0.232609] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.233322] PCI host bridge to bus 0000:00 [ 0.233323] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.233325] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.233328] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.233329] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window] [ 0.233330] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.233332] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.233348] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 conventional PCI endpoint [ 0.233415] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.233422] pci 0000:00:02.0: BAR 0 [mem 0xdb000000-0xdbffffff 64bit] [ 0.233427] pci 0000:00:02.0: BAR 2 [mem 0x50000000-0x5fffffff 64bit pref] [ 0.233430] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.233444] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.233568] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint [ 0.233576] pci 0000:00:04.0: BAR 0 [mem 0xdc420000-0xdc427fff 64bit] [ 0.233802] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint [ 0.233819] pci 0000:00:14.0: BAR 0 [mem 0xdc410000-0xdc41ffff 64bit] [ 0.233871] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.234280] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint [ 0.234297] pci 0000:00:14.2: BAR 0 [mem 0xdc434000-0xdc434fff 64bit] [ 0.234433] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint [ 0.234477] pci 0000:00:15.0: BAR 0 [mem 0xdc433000-0xdc433fff 64bit] [ 0.234788] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint [ 0.234831] pci 0000:00:15.1: BAR 0 [mem 0xdc432000-0xdc432fff 64bit] [ 0.235122] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 conventional PCI endpoint [ 0.235134] pci 0000:00:16.0: BAR 0 [mem 0xdc431000-0xdc431fff 64bit] [ 0.235177] pci 0000:00:16.0: PME# supported from D3hot [ 0.235413] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port [ 0.235430] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.235435] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.235483] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.235498] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 0.235823] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 PCIe Root Port [ 0.235840] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.235844] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.235893] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.235909] pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled [ 0.236229] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 PCIe Root Port [ 0.236246] pci 0000:00:1c.4: PCI bridge to [bus 03-6d] [ 0.236250] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff] [ 0.236257] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.236298] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.236312] pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 0.236751] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 PCIe Root Port [ 0.236768] pci 0000:00:1d.0: PCI bridge to [bus 6e] [ 0.236772] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.236821] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.236836] pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 0.237180] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 conventional PCI endpoint [ 0.237404] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint [ 0.237416] pci 0000:00:1f.2: BAR 0 [mem 0xdc42c000-0xdc42ffff] [ 0.237599] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 conventional PCI endpoint [ 0.237618] pci 0000:00:1f.3: BAR 0 [mem 0xdc428000-0xdc42bfff 64bit] [ 0.237641] pci 0000:00:1f.3: BAR 4 [mem 0xdc400000-0xdc40ffff 64bit] [ 0.237682] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.238171] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint [ 0.238229] pci 0000:00:1f.4: BAR 0 [mem 0xdc430000-0xdc4300ff 64bit] [ 0.238300] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] [ 0.238594] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000 PCIe Endpoint [ 0.238615] pci 0000:01:00.0: BAR 1 [mem 0xdc300000-0xdc300fff] [ 0.238716] pci 0000:01:00.0: supports D1 D2 [ 0.238717] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.238873] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.239197] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000 PCIe Endpoint [ 0.239409] pci 0000:02:00.0: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit] [ 0.240501] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.242205] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.242301] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.242331] pci 0000:03:00.0: PCI bridge to [bus 04-6d] [ 0.242340] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff] [ 0.242349] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.242361] pci 0000:03:00.0: enabling Extended Tags [ 0.242442] pci 0000:03:00.0: supports D1 D2 [ 0.242443] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242615] pci 0000:00:1c.4: PCI bridge to [bus 03-6d] [ 0.242692] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.242724] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.242732] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 0.242756] pci 0000:04:00.0: enabling Extended Tags [ 0.242841] pci 0000:04:00.0: supports D1 D2 [ 0.242842] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242995] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.243024] pci 0000:04:01.0: PCI bridge to [bus 06-38] [ 0.243033] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff] [ 0.243044] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref] [ 0.243058] pci 0000:04:01.0: enabling Extended Tags [ 0.243145] pci 0000:04:01.0: supports D1 D2 [ 0.243146] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243297] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.243328] pci 0000:04:02.0: PCI bridge to [bus 39] [ 0.243337] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff] [ 0.243360] pci 0000:04:02.0: enabling Extended Tags [ 0.243446] pci 0000:04:02.0: supports D1 D2 [ 0.243447] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243600] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.243630] pci 0000:04:04.0: PCI bridge to [bus 3a-6d] [ 0.243639] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff] [ 0.243651] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref] [ 0.243665] pci 0000:04:04.0: enabling Extended Tags [ 0.243753] pci 0000:04:04.0: supports D1 D2 [ 0.243754] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243899] pci 0000:03:00.0: PCI bridge to [bus 04-6d] [ 0.243945] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.243990] pci 0000:04:01.0: PCI bridge to [bus 06-38] [ 0.244069] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330 PCIe Endpoint [ 0.244089] pci 0000:39:00.0: BAR 0 [mem 0xc3f00000-0xc3f0ffff] [ 0.244158] pci 0000:39:00.0: enabling Extended Tags [ 0.244266] pci 0000:39:00.0: supports D1 D2 [ 0.244267] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.244363] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.244500] pci 0000:04:02.0: PCI bridge to [bus 39] [ 0.244549] pci 0000:04:04.0: PCI bridge to [bus 3a-6d] [ 0.244660] pci 0000:6e:00.0: [1179:0116] type 00 class 0x010802 PCIe Endpoint [ 0.244679] pci 0000:6e:00.0: BAR 0 [mem 0xdc200000-0xdc203fff 64bit] [ 0.244918] pci 0000:00:1d.0: PCI bridge to [bus 6e] [ 0.246812] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.246812] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.246812] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.258508] ACPI: EC: interrupt unblocked [ 0.258510] ACPI: EC: event unblocked [ 0.258514] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.258515] ACPI: EC: GPE=0x6e [ 0.258518] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.258519] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.258579] iommu: Default domain type: Translated [ 0.258579] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.258579] pps_core: LinuxPPS API ver. 1 registered [ 0.258579] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.258579] PTP clock support registered [ 0.258579] EDAC MC: Ver: 3.0.0 [ 0.258579] efivars: Registered efivars operations [ 0.258579] NetLabel: Initializing [ 0.258579] NetLabel: domain hash size = 128 [ 0.258579] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.258579] NetLabel: unlabeled traffic allowed by default [ 0.258579] PCI: Using ACPI for IRQ routing [ 0.276900] PCI: pci_cache_line_size set to 64 bytes [ 0.277271] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.277273] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.277274] e820: reserve RAM buffer [mem 0x21c28018-0x23ffffff] [ 0.277275] e820: reserve RAM buffer [mem 0x2c789000-0x2fffffff] [ 0.277276] e820: reserve RAM buffer [mem 0x3a3c5000-0x3bffffff] [ 0.277277] e820: reserve RAM buffer [mem 0x3dda7000-0x3fffffff] [ 0.277278] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff] [ 0.277279] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff] [ 0.280503] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.280504] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.280505] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.280509] vgaarb: loaded [ 0.280561] clocksource: Switched to clocksource tsc-early [ 0.280673] VFS: Disk quotas dquot_6.6.0 [ 0.280682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.280790] AppArmor: AppArmor Filesystem Enabled [ 0.280801] pnp: PnP ACPI init [ 0.280969] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.280971] system 00:00: [io 0xffff] has been reserved [ 0.280973] system 00:00: [io 0xffff] has been reserved [ 0.280974] system 00:00: [io 0xffff] has been reserved [ 0.280975] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.280977] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.281093] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.281354] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.281357] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.281358] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.281360] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.281361] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.281363] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.281365] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.281366] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.281368] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.281369] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.281404] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.281406] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.281407] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.281408] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.281410] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.281411] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.281413] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.281635] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.282423] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.282425] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.285604] pnp: PnP ACPI: found 9 devices [ 0.291103] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.291154] NET: Registered PF_INET protocol family [ 0.291272] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.302327] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.302348] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.302394] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.302559] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.302743] TCP: Hash tables configured (established 131072 bind 65536) [ 0.302889] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.302929] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.302959] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.303007] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.303013] NET: Registered PF_XDP protocol family [ 0.303025] pci 0000:04:01.0: bridge window [io 0x1000-0x0fff] to [bus 06-38] add_size 1000 [ 0.303033] pci 0000:04:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000 [ 0.303035] pci 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 0.303038] pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 3a-6d] add_size 1000 [ 0.303040] pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-6d] add_size 3000 [ 0.303042] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 4000 [ 0.303048] pci 0000:00:1c.4: bridge window [io 0x2000-0x5fff]: assigned [ 0.303050] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.303054] pci 0000:00:1c.0: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.303059] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.303061] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdc1fffff] [ 0.303066] pci 0000:03:00.0: bridge window [io 0x2000-0x4fff]: assigned [ 0.303070] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 0.303071] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 0.303073] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]: assigned [ 0.303074] pci 0000:04:02.0: bridge window [io 0x3000-0x3fff]: assigned [ 0.303075] pci 0000:04:04.0: bridge window [io 0x4000-0x4fff]: assigned [ 0.303077] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 0.303078] pci 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 0.303080] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.303084] pci 0000:04:00.0: bridge window [mem 0xda000000-0xda0fffff] [ 0.303092] pci 0000:04:01.0: PCI bridge to [bus 06-38] [ 0.303095] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff] [ 0.303099] pci 0000:04:01.0: bridge window [mem 0xac000000-0xc3efffff] [ 0.303102] pci 0000:04:01.0: bridge window [mem 0x60000000-0x7fffffff 64bit pref] [ 0.303108] pci 0000:04:02.0: PCI bridge to [bus 39] [ 0.303110] pci 0000:04:02.0: bridge window [io 0x3000-0x3fff] [ 0.303114] pci 0000:04:02.0: bridge window [mem 0xc3f00000-0xc3ffffff] [ 0.303122] pci 0000:04:04.0: PCI bridge to [bus 3a-6d] [ 0.303124] pci 0000:04:04.0: bridge window [io 0x4000-0x4fff] [ 0.303128] pci 0000:04:04.0: bridge window [mem 0xc4000000-0xd9ffffff] [ 0.303131] pci 0000:04:04.0: bridge window [mem 0x80000000-0xa9ffffff 64bit pref] [ 0.303136] pci 0000:03:00.0: PCI bridge to [bus 04-6d] [ 0.303138] pci 0000:03:00.0: bridge window [io 0x2000-0x4fff] [ 0.303142] pci 0000:03:00.0: bridge window [mem 0xac000000-0xda0fffff] [ 0.303145] pci 0000:03:00.0: bridge window [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.303151] pci 0000:00:1c.4: PCI bridge to [bus 03-6d] [ 0.303152] pci 0000:00:1c.4: bridge window [io 0x2000-0x5fff] [ 0.303155] pci 0000:00:1c.4: bridge window [mem 0xac000000-0xda0fffff] [ 0.303157] pci 0000:00:1c.4: bridge window [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.303161] pci 0000:00:1d.0: PCI bridge to [bus 6e] [ 0.303163] pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.303168] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.303170] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.303171] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 0.303172] pci_bus 0000:00: resource 7 [mem 0x4f800000-0xdfffffff window] [ 0.303173] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 0.303175] pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff] [ 0.303176] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff] [ 0.303178] pci_bus 0000:03: resource 0 [io 0x2000-0x5fff] [ 0.303179] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff] [ 0.303180] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.303181] pci_bus 0000:04: resource 0 [io 0x2000-0x4fff] [ 0.303182] pci_bus 0000:04: resource 1 [mem 0xac000000-0xda0fffff] [ 0.303184] pci_bus 0000:04: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref] [ 0.303185] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff] [ 0.303186] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.303187] pci_bus 0000:06: resource 1 [mem 0xac000000-0xc3efffff] [ 0.303189] pci_bus 0000:06: resource 2 [mem 0x60000000-0x7fffffff 64bit pref] [ 0.303190] pci_bus 0000:39: resource 0 [io 0x3000-0x3fff] [ 0.303191] pci_bus 0000:39: resource 1 [mem 0xc3f00000-0xc3ffffff] [ 0.303192] pci_bus 0000:3a: resource 0 [io 0x4000-0x4fff] [ 0.303193] pci_bus 0000:3a: resource 1 [mem 0xc4000000-0xd9ffffff] [ 0.303195] pci_bus 0000:3a: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref] [ 0.303196] pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff] [ 0.303814] pci 0000:03:00.0: enabling device (0006 -> 0007) [ 0.303848] pci 0000:04:02.0: enabling device (0006 -> 0007) [ 0.303969] PCI: CLS 128 bytes, default 64 [ 0.304016] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint [ 0.304075] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] [ 0.304307] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0 [ 0.304310] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1 [ 0.304318] DMAR: No ATSR found [ 0.304319] DMAR: No SATC found [ 0.304324] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.304327] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.304328] DMAR: IOMMU feature nwfs inconsistent [ 0.304328] DMAR: IOMMU feature pasid inconsistent [ 0.304329] DMAR: IOMMU feature eafs inconsistent [ 0.304330] DMAR: IOMMU feature prs inconsistent [ 0.304331] DMAR: IOMMU feature nest inconsistent [ 0.304331] DMAR: IOMMU feature mts inconsistent [ 0.304332] DMAR: IOMMU feature sc_support inconsistent [ 0.304332] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.304333] DMAR: dmar0: Using Queued invalidation [ 0.304336] DMAR: dmar1: Using Queued invalidation [ 0.304354] Trying to unpack rootfs image as initramfs... [ 0.304609] pci 0000:00:02.0: Adding to iommu group 0 [ 0.304642] pci 0000:00:00.0: Adding to iommu group 1 [ 0.304651] pci 0000:00:04.0: Adding to iommu group 2 [ 0.304664] pci 0000:00:14.0: Adding to iommu group 3 [ 0.304671] pci 0000:00:14.2: Adding to iommu group 3 [ 0.304686] pci 0000:00:15.0: Adding to iommu group 4 [ 0.304695] pci 0000:00:15.1: Adding to iommu group 4 [ 0.304705] pci 0000:00:16.0: Adding to iommu group 5 [ 0.304714] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.304723] pci 0000:00:1c.2: Adding to iommu group 7 [ 0.304733] pci 0000:00:1c.4: Adding to iommu group 8 [ 0.304741] pci 0000:00:1d.0: Adding to iommu group 9 [ 0.304761] pci 0000:00:1f.0: Adding to iommu group 10 [ 0.304769] pci 0000:00:1f.2: Adding to iommu group 10 [ 0.304779] pci 0000:00:1f.3: Adding to iommu group 10 [ 0.304787] pci 0000:00:1f.4: Adding to iommu group 10 [ 0.304796] pci 0000:01:00.0: Adding to iommu group 11 [ 0.304815] pci 0000:02:00.0: Adding to iommu group 12 [ 0.304824] pci 0000:03:00.0: Adding to iommu group 13 [ 0.304834] pci 0000:04:00.0: Adding to iommu group 14 [ 0.304845] pci 0000:04:01.0: Adding to iommu group 15 [ 0.304855] pci 0000:04:02.0: Adding to iommu group 16 [ 0.304864] pci 0000:04:04.0: Adding to iommu group 17 [ 0.304868] pci 0000:39:00.0: Adding to iommu group 16 [ 0.304878] pci 0000:6e:00.0: Adding to iommu group 18 [ 0.306013] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.306016] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.306017] software IO TLB: mapped [mem 0x00000000363c5000-0x000000003a3c5000] (64MB) [ 0.306076] sgx: EPC section 0x40200000-0x45f7ffff [ 0.306735] Initialise system trusted keyrings [ 0.306742] Key type blacklist registered [ 0.306767] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.306777] zbud: loaded [ 0.306856] fuse: init (API version 7.40) [ 0.306975] integrity: Platform Keyring initialized [ 0.306978] integrity: Machine keyring initialized [ 0.306979] Key type asymmetric registered [ 0.306980] Asymmetric key parser 'x509' registered [ 0.326149] Freeing initrd memory: 11520K [ 0.329688] alg: self-tests disabled [ 0.329738] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.329764] io scheduler mq-deadline registered [ 0.331312] pcieport 0000:04:01.0: enabling device (0006 -> 0007) [ 0.331571] pcieport 0000:04:04.0: enabling device (0006 -> 0007) [ 0.331732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.333996] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.333998] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.334136] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.334579] hpet_acpi_add: no address or irqs in _CRS [ 0.334594] Linux agpgart interface v0.103 [ 0.361203] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1) [ 0.383195] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.383448] i8042: Warning: Keylock active [ 0.384953] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.384957] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.385154] mousedev: PS/2 mouse device common for all mice [ 0.385170] rtc_cmos 00:01: RTC can wake from S4 [ 0.385901] rtc_cmos 00:01: registered as rtc0 [ 0.386093] rtc_cmos 00:01: setting system clock to 2024-08-05T15:02:36 UTC (1722870156) [ 0.386116] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.386538] intel_pstate: Intel P-state driver initializing [ 0.386786] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.388171] intel_pstate: HWP enabled [ 0.388472] ledtrig-cpu: registered to indicate activity on CPUs [ 0.388706] efifb: probing for efifb [ 0.388715] efifb: framebuffer at 0x50000000, using 32400k, total 32400k [ 0.388717] efifb: mode is 3840x2160x32, linelength=15360, pages=1 [ 0.388718] efifb: scrolling: redraw [ 0.388718] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.388822] Console: switching to colour frame buffer device 240x67 [ 0.393194] fb0: EFI VGA frame buffer device [ 0.393328] NET: Registered PF_INET6 protocol family [ 0.397329] Segment Routing with IPv6 [ 0.397340] In-situ OAM (IOAM) with IPv6 [ 0.397358] mip6: Mobile IPv6 [ 0.397361] NET: Registered PF_PACKET protocol family [ 0.397491] mpls_gso: MPLS GSO support [ 0.398127] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.398364] microcode: Current revision: 0x000000f4 [ 0.398366] microcode: Updated early from: 0x000000f0 [ 0.398668] IPI shorthand broadcast: enabled [ 0.399580] sched_clock: Marking stable (392652502, 6001445)->(532518855, -133864908) [ 0.399748] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.400020] registered taskstats version 1 [ 0.400103] Loading compiled-in X.509 certificates [ 0.400876] Loaded X.509 cert 'Build time autogenerated kernel key: 7f5bd2f1b820bfe2d9f1511b550534bebf9d8a37' [ 0.402242] Key type .fscrypt registered [ 0.402243] Key type fscrypt-provisioning registered [ 0.408097] cryptd: max_cpu_qlen set to 1000 [ 0.414045] AVX2 version of gcm_enc/dec engaged. [ 0.414090] AES CTR mode by8 optimization enabled [ 0.437566] Key type encrypted registered [ 0.437571] AppArmor: AppArmor sha256 policy hashing enabled [ 0.438857] integrity: Loading X.509 certificate: UEFI:db [ 0.438879] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 0.438880] integrity: Loading X.509 certificate: UEFI:db [ 0.438899] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.438900] integrity: Loading X.509 certificate: UEFI:db [ 0.438918] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.439936] ima: Allocated hash algorithm: sha256 [ 0.462183] ima: No architecture policies found [ 0.462211] evm: Initialising EVM extended attributes: [ 0.462213] evm: security.selinux [ 0.462215] evm: security.SMACK64 (disabled) [ 0.462216] evm: security.SMACK64EXEC (disabled) [ 0.462218] evm: security.SMACK64TRANSMUTE (disabled) [ 0.462219] evm: security.SMACK64MMAP (disabled) [ 0.462220] evm: security.apparmor [ 0.462221] evm: security.ima [ 0.462223] evm: security.capability [ 0.462224] evm: HMAC attrs: 0x1 [ 0.464359] RAS: Correctable Errors collector initialized. [ 0.493419] clk: Disabling unused clocks [ 0.493423] PM: genpd: Disabling unused power domains [ 0.495166] Freeing unused decrypted memory: 2028K [ 0.496008] Freeing unused kernel image (initmem) memory: 4072K [ 0.496129] Write protecting the kernel read-only data: 28672k [ 0.497206] Freeing unused kernel image (rodata/data gap) memory: 1356K [ 0.542412] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.542416] x86/mm: Checking user space page tables [ 0.579260] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.579264] Run /init as init process [ 0.579265] with arguments: [ 0.579266] /init [ 0.579267] noisapnp [ 0.579268] with environment: [ 0.579268] HOME=/ [ 0.579269] TERM=linux [ 0.579270] BOOT_IMAGE=/vmlinuz-6.9.12-amd64 [ 0.718215] nvme nvme0: pci function 0000:6e:00.0 [ 0.726492] nvme nvme0: 8/0/0 default/read/poll queues [ 0.728568] nvme0n1: p1 p2 p3 p4 [ 0.866777] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.866819] device-mapper: uevent: version 1.0.3 [ 0.866974] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.334239] tsc: Refined TSC clocksource calibration: 1992.005 MHz [ 1.334260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d5b41a85, max_idle_ns: 881590480540 ns [ 1.334352] clocksource: Switched to clocksource tsc [ 1.505394] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734] [ 1.540145] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..] [ 1.540170] psmouse serio1: synaptics: Your touchpad (PNP: DLL07e6 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 1.607447] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007 [ 1.642357] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 [ 8.012965] EXT4-fs (dm-0): mounted filesystem b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro with ordered data mode. Quota mode: none. [ 8.073095] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.182086] systemd[1]: Inserted module 'autofs4' [ 8.306922] systemd[1]: systemd 256.4-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE) [ 8.306929] systemd[1]: Detected architecture x86-64. [ 8.310865] systemd[1]: Hostname set to <palestrina.molgen.mpg.de>. [ 8.654314] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 8.859227] systemd[1]: Queued start job for default target graphical.target. [ 8.893822] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 8.894962] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 8.895942] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. [ 8.896925] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 8.897630] systemd[1]: Created slice user.slice - User and Session Slice. [ 8.897833] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 8.897985] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 8.898562] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 8.898621] systemd[1]: Expecting device dev-disk-by\x2duuid-753e5599\x2d234d\x2d4759\x2db893\x2d8eaa488f5bfe.device - /dev/disk/by-uuid/753e5599-234d-4759-b893-8eaa488f5bfe... [ 8.898644] systemd[1]: Expecting device dev-disk-by\x2duuid-C484\x2d9038.device - /dev/disk/by-uuid/C484-9038... [ 8.898666] systemd[1]: Expecting device dev-nvme0n1p3.device - /dev/nvme0n1p3... [ 8.898721] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 8.898790] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 8.898816] systemd[1]: Reached target paths.target - Path Units. [ 8.898864] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 8.898899] systemd[1]: Reached target slices.target - Slice Units. [ 8.898937] systemd[1]: Reached target swap.target - Swaps. [ 8.898998] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 8.902415] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 8.904395] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 8.904629] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 8.904899] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 8.905191] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 8.905293] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.905333] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.905567] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 8.905749] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 8.908374] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 8.910463] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 8.917413] systemd[1]: gnu-store.mount: Directory /gnu/store to mount over is not empty, mounting anyway. [ 8.918193] systemd[1]: Mounting gnu-store.mount - Read-only /gnu/store for GNU Guix... [ 8.919366] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 8.920407] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 8.921331] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 8.921929] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.922916] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp... [ 8.924294] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 8.925581] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 8.926863] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 8.927700] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 8.929063] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 8.929222] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 8.929298] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 8.931411] systemd[1]: Starting systemd-journald.service - Journal Service... [ 8.933307] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 8.933338] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.934357] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 8.934421] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 8.935454] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 8.939474] pstore: Using crash dump compression: deflate [ 8.943143] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 8.977770] pstore: Registered efi_pstore as persistent store backend [ 8.980403] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 8.980541] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 8.980683] systemd[1]: Mounted gnu-store.mount - Read-only /gnu/store for GNU Guix. [ 8.980826] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock. [ 8.980954] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 8.981070] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 8.981186] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp. [ 8.981515] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 8.981927] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 8.982170] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 8.982866] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 8.983007] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 8.983221] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 8.983351] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 8.984259] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 8.985185] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 8.986247] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 8.986658] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials. [ 8.991152] systemd-journald[337]: Collecting audit messages is disabled. [ 8.993823] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 8.994016] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 8.994902] lp: driver loaded but no devices found [ 8.998857] ppdev: user-space parallel port driver [ 9.019266] EXT4-fs (dm-0): re-mounted b8b2f3b6-8c20-4c2a-8895-aa2768866674 r/w. Quota mode: none. [ 9.020476] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 9.021132] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 9.021197] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 9.022226] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 9.022255] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 9.025312] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 9.025489] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 9.026473] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 9.034404] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 9.034725] ACPI: bus type drm_connector registered [ 9.035520] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 9.035697] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 9.035962] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 9.036933] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 9.046748] systemd[1]: Started systemd-journald.service - Journal Service. [ 9.058119] systemd-journald[337]: Received client request to flush runtime journal. [ 9.239116] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 9.239176] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 9.244326] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 9.244357] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 9.244427] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 9.252941] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 9.253823] platform idma64.0: Adding to iommu group 19 [ 9.254956] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 9.255480] wmi_bus wmi_bus-PNP0C14:01: [Firmware Bug]: WQBC data block query control method not found [ 9.255533] platform i2c_designware.0: Adding to iommu group 20 [ 9.255622] ACPI: button: Lid Switch [LID0] [ 9.261289] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.262792] ACPI: button: Power Button [PBTN] [ 9.262862] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 9.263132] ACPI: button: Sleep Button [SBTN] [ 9.263189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 9.267284] ACPI: button: Power Button [PWRF] [ 9.271517] Consider using thermal netlink events interface [ 9.273105] ACPI: AC: AC Adapter [AC] (on-line) [ 9.274149] ACPI: bus type USB registered [ 9.274255] usbcore: registered new interface driver usbfs [ 9.274407] usbcore: registered new interface driver hub [ 9.274469] usbcore: registered new device driver usb [ 9.316203] ACPI: battery: Slot [BAT0] (battery present) [ 9.320745] hid: raw HID events driver (C) Jiri Kosina [ 9.335572] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 9.337892] platform idma64.1: Adding to iommu group 21 [ 9.338094] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 9.338140] platform i2c_designware.1: Adding to iommu group 22 [ 9.351246] intel_pmc_core INT33A1:00: initialized [ 9.354417] input: Intel HID events as /devices/platform/INT33D5:00/input/input8 [ 9.355799] intel-hid INT33D5:00: platform supports 5 button array [ 9.360211] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input9 [ 9.372209] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.372216] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 9.373257] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 9.373386] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 9.389884] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 9.389890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 9.389895] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 9.390014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 9.390017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.390019] usb usb1: Product: xHCI Host Controller [ 9.390021] usb usb1: Manufacturer: Linux 6.9.12-amd64 xhci-hcd [ 9.390022] usb usb1: SerialNumber: 0000:00:14.0 [ 9.390537] hub 1-0:1.0: USB hub found [ 9.390562] hub 1-0:1.0: 12 ports detected [ 9.428397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09 [ 9.428403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.428405] usb usb2: Product: xHCI Host Controller [ 9.428407] usb usb2: Manufacturer: Linux 6.9.12-amd64 xhci-hcd [ 9.428409] usb usb2: SerialNumber: 0000:00:14.0 [ 9.431728] hub 2-0:1.0: USB hub found [ 9.431748] hub 2-0:1.0: 6 ports detected [ 9.439111] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 9.439118] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3 [ 9.440340] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [ 9.444560] xhci_hcd 0000:39:00.0: xHCI Host Controller [ 9.444566] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4 [ 9.444570] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 9.444607] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09 [ 9.444610] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.444611] usb usb3: Product: xHCI Host Controller [ 9.444612] usb usb3: Manufacturer: Linux 6.9.12-amd64 xhci-hcd [ 9.444614] usb usb3: SerialNumber: 0000:39:00.0 [ 9.444753] hub 3-0:1.0: USB hub found [ 9.444762] hub 3-0:1.0: 2 ports detected [ 9.445573] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.09 [ 9.445576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.445577] usb usb4: Product: xHCI Host Controller [ 9.445579] usb usb4: Manufacturer: Linux 6.9.12-amd64 xhci-hcd [ 9.445580] usb usb4: SerialNumber: 0000:39:00.0 [ 9.445766] hub 4-0:1.0: USB hub found [ 9.445774] hub 4-0:1.0: 2 ports detected [ 9.461847] i2c_hid_acpi i2c-ELAN24EE:00: i2c_hid_get_input: IRQ triggered but there's no data [ 9.564016] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.568760] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 9.569418] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 9.570300] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.571569] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 9.584679] iTCO_vendor_support: vendor-support=0 [ 9.599478] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 9.621596] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 9.627564] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.628547] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11 [ 9.636081] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 9.636085] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.636086] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.636087] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.636088] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.636089] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 9.653314] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 9.680156] intel_rapl_common: Found RAPL domain package [ 9.680162] intel_rapl_common: Found RAPL domain dram [ 9.688093] intel_rapl_common: Found RAPL domain package [ 9.688105] intel_rapl_common: Found RAPL domain core [ 9.688107] intel_rapl_common: Found RAPL domain uncore [ 9.688108] intel_rapl_common: Found RAPL domain dram [ 9.688109] intel_rapl_common: Found RAPL domain psys [ 9.688180] input: ELAN24EE:00 04F3:24EE Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input12 [ 9.690632] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input13 [ 9.698015] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 9.698040] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input14 [ 9.698040] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 9.698125] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00 [ 9.703489] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input16 [ 9.710060] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input17 [ 9.712776] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00 [ 9.747844] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.747859] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 9.818728] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.833039] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 9.835459] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 9.855965] usb 3-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 5.e3 [ 9.855970] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.855972] usb 3-1: Product: USB2.0 Hub [ 9.855973] usb 3-1: Manufacturer: VIA Labs, Inc. [ 9.855974] usb 3-1: SerialNumber: 000000000 [ 9.858652] hub 3-1:1.0: USB hub found [ 9.858827] hub 3-1:1.0: 5 ports detected [ 9.873153] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.893400] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.896343] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=76.05 [ 9.896348] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 9.896350] usb 1-5: Product: Integrated_Webcam_HD [ 9.896352] usb 1-5: Manufacturer: CN0FFMHCLOG0081JBA49A00 [ 9.896353] usb 1-5: SerialNumber: 200901010001 [ 9.900693] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.901264] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.901271] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.948587] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input19 [ 9.948688] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input20 [ 9.948737] input: ELAN24EE:00 04F3:24EE UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input21 [ 9.948798] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00 [ 9.948840] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.949122] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.949129] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.981611] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.981795] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.981801] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.982479] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 9.982566] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.982726] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 9.982731] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.030009] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 10.030640] usb 4-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 5.e3 [ 10.030643] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.030645] usb 4-1: Product: USB3.0 Hub [ 10.030646] usb 4-1: Manufacturer: VIA Labs, Inc. [ 10.030647] usb 4-1: SerialNumber: 000000000 [ 10.032058] hub 4-1:1.0: USB hub found [ 10.032173] hub 4-1:1.0: 4 ports detected [ 10.117875] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2) [ 10.117889] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2) [ 10.117898] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2) [ 10.117904] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2) [ 10.123503] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a [ 10.123506] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 10.123854] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2 [ 10.134111] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.134327] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.134339] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.134357] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.134559] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.134566] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.186543] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01 [ 10.186547] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.187944] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.188138] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.188143] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.191344] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91 [ 10.281450] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 10.321206] mc: Linux media interface: v0.10 [ 10.355254] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 10.355464] Console: switching to colour dummy device 80x25 [ 10.355490] i915 0000:00:02.0: vgaarb: deactivate vga console [ 10.355543] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 10.361041] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.362545] ath: EEPROM regdomain: 0x6c [ 10.362548] ath: EEPROM indicates we should expect a direct regpair map [ 10.362549] ath: Country alpha2 being used: 00 [ 10.362550] ath: Regpair used: 0x6c [ 10.370822] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2) [ 10.371034] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2) [ 10.371038] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2 [ 10.371042] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management. [ 10.371043] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 [ 10.371422] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 10.373780] EXT4-fs (nvme0n1p4): mounted filesystem 753e5599-234d-4759-b893-8eaa488f5bfe r/w with ordered data mode. Quota mode: none. [ 10.383949] videodev: Linux video capture interface: v2.00 [ 10.408703] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4) [ 10.408707] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.409064] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.409070] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.415751] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.416043] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.416051] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.416267] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.416273] usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0bda:58f4) [ 10.416452] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.416465] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.418255] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.418771] usbcore: registered new interface driver uvcvideo [ 10.419034] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.419458] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.419473] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.419480] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.458296] Bluetooth: Core ver 2.22 [ 10.458315] NET: Registered PF_BLUETOOTH protocol family [ 10.458316] Bluetooth: HCI device and connection manager initialized [ 10.458320] Bluetooth: HCI socket layer initialized [ 10.458322] Bluetooth: L2CAP socket layer initialized [ 10.458327] Bluetooth: SCO socket layer initialized [ 10.469132] audit: type=1400 audit(1722870166.576:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=534 comm="apparmor_parser" [ 10.469542] audit: type=1400 audit(1722870166.576:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=528 comm="apparmor_parser" [ 10.469547] audit: type=1400 audit(1722870166.576:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=528 comm="apparmor_parser" [ 10.470801] audit: type=1400 audit(1722870166.580:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=527 comm="apparmor_parser" [ 10.471624] audit: type=1400 audit(1722870166.580:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=535 comm="apparmor_parser" [ 10.472090] audit: type=1400 audit(1722870166.580:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=531 comm="apparmor_parser" [ 10.472093] audit: type=1400 audit(1722870166.580:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=531 comm="apparmor_parser" [ 10.472095] audit: type=1400 audit(1722870166.580:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=531 comm="apparmor_parser" [ 10.474236] audit: type=1400 audit(1722870166.584:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=537 comm="apparmor_parser" [ 10.475787] audit: type=1400 audit(1722870166.584:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=539 comm="apparmor_parser" [ 10.487946] input: DELL07E6:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input23 [ 10.489377] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input24 [ 10.489389] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.489612] usbcore: registered new interface driver btusb [ 10.489624] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.489633] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.489642] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.491164] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00 [ 10.491234] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.491473] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.491480] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.491488] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.491781] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 10.491784] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 10.492191] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.493525] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.493537] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.493546] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.602020] usb 3-1.1: new high-speed USB device number 3 using xhci_hcd [ 10.719085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.719090] Bluetooth: BNEP filters: protocol multicast [ 10.719093] Bluetooth: BNEP socket layer initialized [ 10.764526] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 7.b4 [ 10.764531] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.764532] usb 3-1.1: Product: USB2.0 Hub [ 10.764534] usb 3-1.1: Manufacturer: VIA Labs, Inc. [ 10.764535] usb 3-1.1: SerialNumber: 000000000 [ 10.765488] hub 3-1.1:1.0: USB hub found [ 10.765625] hub 3-1.1:1.0: 4 ports detected [ 10.823391] block nvme0n1: No UUID available providing old NGUID [ 10.851774] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 10.858063] usb 4-1.1: new SuperSpeed USB device number 3 using xhci_hcd [ 10.879781] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 10.888633] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.888947] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.888956] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.888962] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.888977] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.889151] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.889156] snd_soc_avs 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.889161] sof-audio-pci-intel-skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.925369] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 7.b4 [ 10.925375] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.925376] usb 4-1.1: Product: USB3.0 Hub [ 10.925378] usb 4-1.1: Manufacturer: VIA Labs, Inc. [ 10.925379] usb 4-1.1: SerialNumber: 000000000 [ 10.926839] hub 4-1.1:1.0: USB hub found [ 10.927023] hub 4-1.1:1.0: 4 ports detected [ 10.927156] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 10.932389] NET: Registered PF_QIPCRTR protocol family [ 10.939745] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 10.960774] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 10.979869] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 0 [ 10.983672] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.988236] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input26 [ 10.988470] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 10.999017] usb 3-1.5: new high-speed USB device number 4 using xhci_hcd [ 11.022174] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 11.026032] fbcon: i915drmfb (fb0) is primary device [ 11.043293] Console: switching to colour frame buffer device 240x67 [ 11.065541] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 11.092862] Initializing XFRM netlink socket [ 11.096160] PPP generic driver version 2.4.2 [ 11.103311] usb 3-1.5: New USB device found, idVendor=2109, idProduct=8817, bcdDevice= 0.01 [ 11.103317] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.103320] usb 3-1.5: Product: USB Billboard Device [ 11.103321] usb 3-1.5: Manufacturer: VIA Labs, Inc. [ 11.103323] usb 3-1.5: SerialNumber: 0000000000000001 [ 11.122919] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 11.122927] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.122930] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.122933] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.122935] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.122936] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 11.122938] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b [ 11.122940] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 11.178601] NET: Registered PF_PPPOX protocol family [ 11.179999] Bluetooth: MGMT ver 1.22 [ 11.182077] usb 4-1.4: new SuperSpeed USB device number 4 using xhci_hcd [ 11.185483] NET: Registered PF_ALG protocol family [ 11.190030] IPsec XFRM device driver [ 11.192891] l2tp_core: L2TP core driver, V2.0 [ 11.195686] l2tp_netlink: L2TP netlink interface [ 11.199643] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.204738] usb 4-1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [ 11.204745] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.204747] usb 4-1.4: Product: Mass Storage Device [ 11.204750] usb 4-1.4: Manufacturer: Generic [ 11.204752] usb 4-1.4: SerialNumber: 058F84688461 [ 11.251057] SCSI subsystem initialized [ 11.260279] usb-storage 4-1.4:1.0: USB Mass Storage device detected [ 11.260483] scsi host0: usb-storage 4-1.4:1.0 [ 11.260592] usbcore: registered new interface driver usb-storage [ 11.266543] usbcore: registered new interface driver uas [ 11.578078] usb 4-1.1.3: new SuperSpeed USB device number 5 using xhci_hcd [ 11.598543] usb 4-1.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 11.598549] usb 4-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 11.598551] usb 4-1.1.3: Product: USB 10/100/1000 LAN [ 11.598553] usb 4-1.1.3: Manufacturer: Realtek [ 11.598554] usb 4-1.1.3: SerialNumber: 000001 [ 11.634701] Bluetooth: RFCOMM TTY layer initialized [ 11.634708] Bluetooth: RFCOMM socket layer initialized [ 11.634713] Bluetooth: RFCOMM ver 1.11 [ 11.646204] usbcore: registered new device driver r8152-cfgselector [ 11.726362] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd [ 11.751381] r8152 4-1.1.3:1.0: firmware: failed to load rtl_nic/rtl8153a-4.fw (-2) [ 11.751393] r8152 4-1.1.3:1.0: firmware: failed to load rtl_nic/rtl8153a-4.fw (-2) [ 11.751394] r8152 4-1.1.3:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2 [ 11.751397] r8152 4-1.1.3:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2) [ 11.783652] r8152 4-1.1.3:1.0 eth0: v1.12.13 [ 11.783680] usbcore: registered new interface driver r8152 [ 11.791006] usbcore: registered new interface driver cdc_ether [ 11.792652] usbcore: registered new interface driver r8153_ecm [ 11.838135] r8152 4-1.1.3:1.0 enx00e04ceb9e75: renamed from eth0 [ 11.850603] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 11.850770] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 11.850854] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 11.850911] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 12.279198] scsi 0:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [ 12.279844] scsi 0:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [ 12.288073] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.288117] scsi 0:0:0:1: Attached scsi generic sg1 type 0 [ 12.295935] sd 0:0:0:0: [sda] Media removed, stopped polling [ 12.296133] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 12.296394] sd 0:0:0:1: [sdb] Media removed, stopped polling [ 12.296663] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 13.440467] rfkill: input handler disabled [ 15.237590] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on [ 16.184655] wlp2s0: VHT information is missing, disabling VHT [ 16.230368] wlp2s0: authenticate with 6c:f3:7f:10:ae:1a (local address=9c:b6:d0:89:88:7d) [ 16.230375] wlp2s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3) [ 16.236923] wlp2s0: authenticated [ 16.238014] wlp2s0: associate with 6c:f3:7f:10:ae:1a (try 1/3) [ 16.246773] wlp2s0: RX AssocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=1) [ 16.249480] wlp2s0: associated [ 19.807429] rfkill: input handler enabled [ 21.283975] rfkill: input handler disabled [ 22.020753] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 22.704597] FAT-fs (nvme0n1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 38.518396] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 38.518404] xhci_hcd 0000:39:00.0: Giveback URB 00000000fcf989b8, len = 18, expected = 96, status = 0 [ 38.518521] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 38.518526] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 38.518530] xhci_hcd 0000:39:00.0: // Ding dong! [ 38.518546] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 38.518548] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1de0 (dma) in stream 0 URB 00000000a9c75c76 [ 38.518552] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1df0, cycle 1 [ 38.518554] xhci_hcd 0000:39:00.0: // Ding dong! [ 38.518557] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 38.518624] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1df0 [ 38.518629] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 38.518632] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 38.518636] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 38.519175] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 38.519180] xhci_hcd 0000:39:00.0: Giveback URB 00000000fcf989b8, len = 18, expected = 96, status = 0 [ 38.519238] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 38.519241] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 38.519244] xhci_hcd 0000:39:00.0: // Ding dong! [ 38.519255] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 38.519258] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1e20 (dma) in stream 0 URB 00000000a9c75c76 [ 38.519261] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1e30, cycle 1 [ 38.519263] xhci_hcd 0000:39:00.0: // Ding dong! [ 38.519266] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 38.519295] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1e30 [ 38.519298] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 38.519300] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 38.519303] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 40.019585] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 40.534423] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 40.534427] xhci_hcd 0000:39:00.0: Giveback URB 00000000fcf989b8, len = 18, expected = 96, status = 0 [ 40.534454] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 40.534456] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 40.534458] xhci_hcd 0000:39:00.0: // Ding dong! [ 40.534495] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 40.534497] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1e60 (dma) in stream 0 URB 00000000a9c75c76 [ 40.534499] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1e70, cycle 1 [ 40.534501] xhci_hcd 0000:39:00.0: // Ding dong! [ 40.534503] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 40.534535] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1e70 [ 40.534536] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 40.534538] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 40.534540] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 40.534849] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 40.534852] xhci_hcd 0000:39:00.0: Giveback URB 00000000fcf989b8, len = 18, expected = 96, status = 0 [ 40.534889] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 40.534891] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 40.534892] xhci_hcd 0000:39:00.0: // Ding dong! [ 40.534929] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 40.534931] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1ea0 (dma) in stream 0 URB 00000000a9c75c76 [ 40.534933] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1eb0, cycle 1 [ 40.534934] xhci_hcd 0000:39:00.0: // Ding dong! [ 40.534936] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 40.534970] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1eb0 [ 40.534971] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 40.534972] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 40.534974] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 40.793494] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32216 bytes untransferred [ 40.793704] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32264 bytes untransferred [ 40.807576] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32648 bytes untransferred [ 41.053319] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 42.077288] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 42.533119] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 42.533127] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 42.533194] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 42.533198] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 42.533202] xhci_hcd 0000:39:00.0: // Ding dong! [ 42.533234] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 42.533237] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1ee0 (dma) in stream 0 URB 00000000a9c75c76 [ 42.533241] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1ef0, cycle 1 [ 42.533244] xhci_hcd 0000:39:00.0: // Ding dong! [ 42.533247] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 42.533273] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1ef0 [ 42.533276] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 42.533279] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 42.533283] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 42.533683] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 42.533687] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 42.533723] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 42.533726] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 42.533729] xhci_hcd 0000:39:00.0: // Ding dong! [ 42.533763] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 42.533765] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1f20 (dma) in stream 0 URB 00000000a9c75c76 [ 42.533769] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1f30, cycle 1 [ 42.533771] xhci_hcd 0000:39:00.0: // Ding dong! [ 42.533775] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 42.533803] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1f30 [ 42.533806] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 42.533808] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 42.533811] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 44.532417] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 44.532427] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 44.532458] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 44.532463] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 44.532468] xhci_hcd 0000:39:00.0: // Ding dong! [ 44.532498] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 44.532502] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1f60 (dma) in stream 0 URB 00000000a9c75c76 [ 44.532508] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1f70, cycle 1 [ 44.532511] xhci_hcd 0000:39:00.0: // Ding dong! [ 44.532515] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 44.532537] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1f70 [ 44.532541] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 44.532545] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 44.532550] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 44.532918] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 44.532923] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 44.532958] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 44.532962] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 44.532966] xhci_hcd 0000:39:00.0: // Ding dong! [ 44.532998] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 44.533001] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1fa0 (dma) in stream 0 URB 00000000a9c75c76 [ 44.533006] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1fb0, cycle 1 [ 44.533009] xhci_hcd 0000:39:00.0: // Ding dong! [ 44.533013] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 44.533038] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1fb0 [ 44.533042] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 44.533045] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 44.533049] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 46.536000] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 46.536017] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 46.536085] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 46.536095] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 46.536103] xhci_hcd 0000:39:00.0: // Ding dong! [ 46.536120] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 46.536126] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef1fe0 (dma) in stream 0 URB 00000000a9c75c76 [ 46.536135] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef1ff0, cycle 1 [ 46.536141] xhci_hcd 0000:39:00.0: // Ding dong! [ 46.536146] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 46.536155] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef1ff0 [ 46.536162] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 46.536167] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 46.536176] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 46.536859] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 46.536874] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 46.536935] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 46.536944] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 46.536952] xhci_hcd 0000:39:00.0: // Ding dong! [ 46.536968] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 46.536974] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef0030 (dma) in stream 0 URB 00000000a9c75c76 [ 46.536984] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef0040, cycle 1 [ 46.536989] xhci_hcd 0000:39:00.0: // Ding dong! [ 46.536995] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 46.537003] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef0040 [ 46.537009] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 46.537014] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 46.537022] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 46.931504] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 47.185470] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32432 bytes untransferred [ 47.186362] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32400 bytes untransferred [ 47.969366] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 48.545910] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 48.545926] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 48.546037] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 48.546045] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 48.546053] xhci_hcd 0000:39:00.0: // Ding dong! [ 48.546077] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 48.546082] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef0070 (dma) in stream 0 URB 00000000a9c75c76 [ 48.546092] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef0080, cycle 1 [ 48.546097] xhci_hcd 0000:39:00.0: // Ding dong! [ 48.546103] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 48.546111] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef0080 [ 48.546117] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 48.546123] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 48.546130] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 48.546627] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 48.546635] xhci_hcd 0000:39:00.0: Giveback URB 00000000b30ae27d, len = 18, expected = 96, status = 0 [ 48.546741] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 6 ep 4 [ 48.546748] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 6 [ 48.546754] xhci_hcd 0000:39:00.0: // Ding dong! [ 48.546781] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 48.546786] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffef00b0 (dma) in stream 0 URB 00000000a9c75c76 [ 48.546793] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffef00c0, cycle 1 [ 48.546798] xhci_hcd 0000:39:00.0: // Ding dong! [ 48.546803] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 48.546810] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffef00c0 [ 48.546815] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 48.546820] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 48.546827] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 48.989245] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 32768 bytes, 32680 bytes untransferred [ 49.739732] PM: suspend entry (deep) [ 49.746345] Filesystems sync: 0.006 seconds [ 49.749334] Freezing user space processes [ 49.751156] Freezing user space processes completed (elapsed 0.001 seconds) [ 49.751160] OOM killer disabled. [ 49.751165] Freezing remaining freezable tasks [ 49.752319] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 49.752378] printk: Suspending console(s) (use no_console_suspend to debug) [ 49.793819] xhci_hcd 0000:39:00.0: Cancel URB 000000005c5c7037, dev 1.1.3, ep 0x83, starting at offset 0xffeb6a50 [ 49.793831] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.793882] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 6 [ 49.793891] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeb6a50 (dma) in stream 0 URB 000000005c5c7037 [ 49.793899] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffeb6a60, cycle 1 [ 49.793903] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.793907] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000005c5c7037 TD as cancel_status is 2 [ 49.793914] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffeb6a60 [ 49.793917] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000005c5c7037 TD [ 49.793921] xhci_hcd 0000:39:00.0: Giveback URB 000000005c5c7037, len = 0, expected = 2, status = -115 [ 49.793927] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.794031] usb 3-1.5: usb suspend, wakeup 0 [ 49.794615] wlp2s0: deauthenticating from 6c:f3:7f:10:ae:1a by local choice (Reason: 3=DEAUTH_LEAVING) [ 49.794827] usb 3-1.1: usb auto-resume [ 49.797315] xhci_hcd 0000:39:00.0: Cancel URB 00000000dd6f5091, dev 1.1.3, ep 0x81, starting at offset 0xffeab330 [ 49.797330] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797345] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797354] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab330 (dma) in stream 0 URB 00000000dd6f5091 [ 49.797361] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 00000000dd6f5091 TD [ 49.797385] xhci_hcd 0000:39:00.0: Cancel URB 000000009e5c75da, dev 1.1.3, ep 0x81, starting at offset 0xffeab370 [ 49.797393] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797407] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797412] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab370 (dma) in stream 0 URB 000000009e5c75da [ 49.797417] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 000000009e5c75da TD [ 49.797440] xhci_hcd 0000:39:00.0: Cancel URB 000000004fe00c2c, dev 1.1.3, ep 0x81, starting at offset 0xffeab340 [ 49.797446] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797461] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797466] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab340 (dma) in stream 0 URB 000000004fe00c2c [ 49.797470] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 000000004fe00c2c TD [ 49.797493] xhci_hcd 0000:39:00.0: Cancel URB 0000000092a9c67d, dev 1.1.3, ep 0x81, starting at offset 0xffeab350 [ 49.797499] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797513] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797517] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab350 (dma) in stream 0 URB 0000000092a9c67d [ 49.797522] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 0000000092a9c67d TD [ 49.797542] xhci_hcd 0000:39:00.0: Cancel URB 000000004f63ddcc, dev 1.1.3, ep 0x81, starting at offset 0xffeab360 [ 49.797548] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797562] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797566] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab360 (dma) in stream 0 URB 000000004f63ddcc [ 49.797571] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 000000004f63ddcc TD [ 49.797591] xhci_hcd 0000:39:00.0: Cancel URB 000000007a3008ea, dev 1.1.3, ep 0x81, starting at offset 0xffeab380 [ 49.797597] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797611] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797615] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab380 (dma) in stream 0 URB 000000007a3008ea [ 49.797620] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 000000007a3008ea TD [ 49.797640] xhci_hcd 0000:39:00.0: Cancel URB 00000000a8f658ef, dev 1.1.3, ep 0x81, starting at offset 0xffeab390 [ 49.797647] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797663] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797667] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab390 (dma) in stream 0 URB 00000000a8f658ef [ 49.797672] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 00000000a8f658ef TD [ 49.797697] xhci_hcd 0000:39:00.0: Cancel URB 00000000af347fde, dev 1.1.3, ep 0x81, starting at offset 0xffeab3a0 [ 49.797706] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797721] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797726] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab3a0 (dma) in stream 0 URB 00000000af347fde [ 49.797731] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Giveback cancelled URB 00000000af347fde TD [ 49.797756] xhci_hcd 0000:39:00.0: Cancel URB 00000000094bab21, dev 1.1.3, ep 0x81, starting at offset 0xffeab310 [ 49.797763] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797776] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797781] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab310 (dma) in stream 0 URB 00000000094bab21 [ 49.797787] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffeab320, cycle 0 [ 49.797791] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797795] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000094bab21 TD as cancel_status is 2 [ 49.797802] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffeab320 [ 49.797806] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000094bab21 TD [ 49.797810] xhci_hcd 0000:39:00.0: Giveback URB 00000000094bab21, len = 0, expected = 32768, status = -115 [ 49.797817] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.797837] xhci_hcd 0000:39:00.0: Cancel URB 00000000db4110e1, dev 1.1.3, ep 0x81, starting at offset 0xffeab320 [ 49.797843] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797858] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 7 ep 2 [ 49.797862] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xffeab320 (dma) in stream 0 URB 00000000db4110e1 [ 49.797867] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xffeab330, cycle 0 [ 49.797871] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.797875] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000db4110e1 TD as cancel_status is 2 [ 49.797881] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @ffeab330 [ 49.797885] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000db4110e1 TD [ 49.797888] xhci_hcd 0000:39:00.0: Giveback URB 00000000db4110e1, len = 0, expected = 32768, status = -115 [ 49.797894] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.799274] r8152-cfgselector 4-1.1.3: usb suspend, wakeup 1 [ 49.813041] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 49.813206] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 49.813220] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 49.813236] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 49.813240] xhci_hcd 0000:00:14.0: hcd_pci_runtime_resume: 0 [ 49.813251] usb usb2: usb auto-resume [ 49.813279] hub 2-0:1.0: hub_resume [ 49.813306] usb usb1: usb auto-resume [ 49.813338] hub 1-0:1.0: hub_resume [ 49.813349] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 49.813441] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100 [ 49.813534] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x2a0, return 0x100 [ 49.813630] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x2a0, return 0x100 [ 49.813722] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0xe63, return 0x507 [ 49.813808] usb usb1-port5: status 0507 change 0000 [ 49.813827] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 49.813922] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 49.814005] usb usb1-port7: status 0107 change 0000 [ 49.814023] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 49.814125] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 49.814217] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 49.814313] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 49.814414] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 49.814460] hub 1-0:1.0: hub_suspend [ 49.814495] usb usb1: bus suspend, wakeup 0 [ 49.820707] hub 4-1.1:1.0: hub_suspend [ 49.820767] xhci_hcd 0000:39:00.0: Cancel URB 000000004fe8c5e4, dev 1.1, ep 0x81, starting at offset 0xfff37020 [ 49.820782] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.820808] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 4 ep 2 [ 49.820815] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff37020 (dma) in stream 0 URB 000000004fe8c5e4 [ 49.820824] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff37030, cycle 1 [ 49.820828] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.820833] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000004fe8c5e4 TD as cancel_status is 2 [ 49.820841] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff37030 [ 49.820846] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000004fe8c5e4 TD [ 49.820851] xhci_hcd 0000:39:00.0: Giveback URB 000000004fe8c5e4, len = 0, expected = 2, status = -115 [ 49.820860] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.821053] usb 4-1.1: usb suspend, wakeup 0 [ 49.833659] usb 4-1.4: usb suspend, wakeup 0 [ 49.840915] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 49.841170] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 49.841298] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 49.841491] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 49.841592] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 49.841680] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 49.841773] hub 2-0:1.0: hub_suspend [ 49.841850] usb usb2: bus suspend, wakeup 0 [ 49.852742] hub 4-1:1.0: hub_suspend [ 49.852755] xhci_hcd 0000:39:00.0: Cancel URB 000000003fc4b350, dev 1, ep 0x81, starting at offset 0xfffbb010 [ 49.852770] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.852830] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 2 ep 2 [ 49.852843] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfffbb010 (dma) in stream 0 URB 000000003fc4b350 [ 49.852854] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfffbb020, cycle 1 [ 49.852860] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.852865] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 000000003fc4b350 TD as cancel_status is 2 [ 49.852874] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fffbb020 [ 49.852879] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 000000003fc4b350 TD [ 49.852884] xhci_hcd 0000:39:00.0: Giveback URB 000000003fc4b350, len = 0, expected = 2, status = -115 [ 49.852893] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.852986] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.853058] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 2 ep 0 [ 49.853138] xhci_hcd 0000:39:00.0: Set port 4-1 link state, portsc: 0x1243, write 0x11261 [ 49.860768] usb 3-1.1: Waited 0ms for CONNECT [ 49.860769] usb 4-1: usb suspend, wakeup 0 [ 49.860781] usb 3-1.1: finish resume [ 49.861072] hub 3-1.1:1.0: hub_resume [ 49.862217] hub 3-1.1:1.0: hub_suspend [ 49.862231] xhci_hcd 0000:39:00.0: Cancel URB 00000000d865e9ea, dev 1.1, ep 0x81, starting at offset 0xfff58020 [ 49.862247] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.862308] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 3 ep 2 [ 49.862321] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff58020 (dma) in stream 0 URB 00000000d865e9ea [ 49.862333] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff58030, cycle 1 [ 49.862339] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.862344] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000d865e9ea TD as cancel_status is 2 [ 49.862354] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff58030 [ 49.862359] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000d865e9ea TD [ 49.862364] xhci_hcd 0000:39:00.0: Giveback URB 00000000d865e9ea, len = 0, expected = 1, status = -115 [ 49.862374] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.862464] usb 3-1.1: usb suspend, wakeup 0 [ 49.862570] hub 3-1:1.0: hub_suspend [ 49.862583] xhci_hcd 0000:39:00.0: Cancel URB 00000000907dd69b, dev 1, ep 0x81, starting at offset 0xfffb6000 [ 49.862597] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.862656] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 1 ep 2 [ 49.862669] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfffb6000 (dma) in stream 0 URB 00000000907dd69b [ 49.862681] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfffb6010, cycle 1 [ 49.862686] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.862691] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000907dd69b TD as cancel_status is 2 [ 49.862701] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fffb6010 [ 49.862706] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000907dd69b TD [ 49.862711] xhci_hcd 0000:39:00.0: Giveback URB 00000000907dd69b, len = 0, expected = 1, status = -115 [ 49.862720] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 49.862801] usb 3-1: usb suspend, wakeup 0 [ 49.862894] hub 3-0:1.0: hub_suspend [ 49.862989] usb usb3: bus suspend, wakeup 0 [ 49.863003] xhci_hcd 0000:39:00.0: port 3-1 not suspended [ 49.863015] xhci_hcd 0000:39:00.0: // Ding dong! [ 49.863075] xhci_hcd 0000:39:00.0: Stopped on No-op or Link TRB for slot 1 ep 0 [ 49.880607] hub 4-0:1.0: hub_suspend [ 49.880691] usb usb4: bus suspend, wakeup 0 [ 49.996409] psmouse serio1: Failed to disable mouse on isa0060/serio1 [ 51.191240] xhci_hcd 0000:39:00.0: config port 4-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191259] xhci_hcd 0000:39:00.0: config port 3-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191265] xhci_hcd 0000:39:00.0: xhci_suspend: stopping usb3 port polling. [ 51.191279] xhci_hcd 0000:39:00.0: // Setting command ring address to 0xffffe001 [ 51.191518] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191537] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191549] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191559] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191568] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191577] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191586] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191592] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191598] xhci_hcd 0000:00:14.0: config port 1-3 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191603] xhci_hcd 0000:00:14.0: config port 1-4 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191610] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191616] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191622] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191628] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191634] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191639] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0x2a0, write: 0x202a0 [ 51.191644] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling. [ 51.191655] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 51.203605] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 51.466757] PM: suspend of devices complete after 1678.533 msecs [ 51.466774] PM: start suspend of devices complete after 1719.848 msecs [ 51.479610] PM: late suspend of devices complete after 12.865 msecs [ 51.484410] ACPI: EC: interrupt blocked [ 51.484620] xhci_hcd 0000:39:00.0: wakeup: 1 [ 51.489227] xhci_hcd 0000:00:14.0: wakeup: 1 [ 51.497732] xhci_hcd 0000:39:00.0: --> PCI D3hot [ 51.519478] xhci_hcd 0000:00:14.0: --> PCI D3hot [ 51.519571] PM: noirq suspend of devices complete after 39.717 msecs [ 51.519591] ACPI: PM: Preparing to enter system sleep state S3 [ 51.535571] ACPI: EC: event blocked [ 51.535576] ACPI: EC: EC stopped [ 51.535578] ACPI: PM: Saving platform NVS memory [ 51.535804] Disabling non-boot CPUs ... [ 51.536987] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20230628/evregion-296) [ 51.537008] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECR1 due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.537029] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV.ECR2 due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.537046] ACPI Error: Aborting method \ECRW due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.537061] ACPI Error: Aborting method \ECGD due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.537075] ACPI Error: Aborting method \NEVT due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.537090] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_BAD_PARAMETER) (20230628/psparse-529) [ 51.539376] smpboot: CPU 1 is now offline [ 51.542898] smpboot: CPU 2 is now offline [ 51.546414] smpboot: CPU 3 is now offline [ 51.550995] smpboot: CPU 4 is now offline [ 51.554455] smpboot: CPU 5 is now offline [ 51.557551] smpboot: CPU 6 is now offline [ 51.560898] smpboot: CPU 7 is now offline [ 51.562011] Checking wakeup interrupts [ 51.562016] Calling kvm_suspend+0x0/0x40 [kvm] [ 51.562212] Calling intel_epb_save+0x0/0x30 [ 51.562225] Calling mce_syscore_suspend+0x0/0x20 [ 51.562231] Calling ledtrig_cpu_syscore_suspend+0x0/0x20 [ 51.562243] Calling timekeeping_suspend+0x0/0x2f0 [ 51.562386] Calling irq_gc_suspend+0x0/0x80 [ 51.562397] Calling save_ioapic_entries+0x0/0xd0 [ 51.563617] Calling i8259A_suspend+0x0/0x30 [ 51.563634] Calling iommu_suspend+0x0/0x120 [ 51.563662] Calling fw_suspend+0x0/0x20 [ 51.563670] Calling acpi_save_bm_rld+0x0/0x30 [ 51.563683] Calling lapic_suspend+0x0/0x160 [ 51.567297] ACPI: PM: Low-level resume complete [ 51.567342] ACPI: EC: EC started [ 51.567343] ACPI: PM: Restoring platform NVS memory [ 51.567403] Calling init_counter_refs+0x0/0x40 [ 51.567408] Calling lapic_resume+0x0/0x220 [ 51.567447] Calling acpi_restore_bm_rld+0x0/0x70 [ 51.567452] Calling irqrouter_resume+0x0/0x50 [ 51.567456] Calling iommu_resume+0x0/0x160 [ 51.567701] Calling i8259A_resume+0x0/0x40 [ 51.567868] Calling ioapic_resume+0x0/0xc0 [ 51.568111] Calling irq_gc_resume+0x0/0x70 [ 51.568114] Calling irq_pm_syscore_resume+0x0/0x20 [ 51.568188] Calling timekeeping_resume+0x0/0x1e0 [ 51.568318] Timekeeping suspended for 14.256 seconds [ 51.568332] Calling ledtrig_cpu_syscore_resume+0x0/0x20 [ 51.568337] Calling mce_syscore_resume+0x0/0x30 [ 51.568356] Calling intel_epb_restore+0x0/0x90 [ 51.568360] Calling microcode_bsp_resume+0x0/0xd0 [ 51.568363] Calling kvm_resume+0x0/0x60 [kvm] [ 51.568445] PM: Triggering wakeup from IRQ 51 [ 51.568476] Enabling non-boot CPUs ... [ 51.568513] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 51.575744] CPU1 is up [ 51.575766] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 51.576525] CPU2 is up [ 51.576544] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 51.577344] CPU3 is up [ 51.577362] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 51.578311] CPU4 is up [ 51.578332] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 51.579160] CPU5 is up [ 51.579180] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 51.580014] CPU6 is up [ 51.580032] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 51.580894] CPU7 is up [ 51.584313] ACPI: PM: Waking up from system sleep state S3 [ 51.897654] ACPI: EC: interrupt unblocked [ 51.898055] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 51.898103] pcieport 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled [ 51.898107] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 51.898119] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 51.916687] PM: noirq resume of devices complete after 19.276 msecs [ 51.916727] DMAR: DRHD: handling fault status reg 2 [ 51.916732] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request [ 51.917727] PM: early resume of devices complete after 0.847 msecs [ 51.917930] ACPI: EC: event unblocked [ 51.919958] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 51.920303] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 51.920303] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1 [ 51.920310] xhci_hcd 0000:00:14.0: resume root hub [ 51.920315] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 51.920329] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 51.920388] usb usb2: usb resume [ 51.920393] usb usb1: usb resume [ 51.920429] hub 2-0:1.0: hub_resume [ 51.920463] hub 1-0:1.0: hub_resume [ 51.920474] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 51.920495] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100 [ 51.920649] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x2a0, return 0x100 [ 51.920813] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x2a0, return 0x100 [ 51.920829] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x206e1, return 0x10101 [ 51.920854] usb usb1-port5: status 0101 change 0001 [ 51.920865] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1 [ 51.920883] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 51.920920] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 51.920929] usb usb1-port7: status 0107 change 0000 [ 51.920948] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 51.920966] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 51.920980] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 51.920994] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 51.921020] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 51.921059] xhci_hcd 0000:39:00.0: // Setting command ring address to 0xffffe001 [ 51.921270] xhci_hcd 0000:39:00.0: xHC error in resume, USBSTS 0x411, Reinit [ 51.921273] usb usb3: root hub lost power or was reset [ 51.921276] usb usb4: root hub lost power or was reset [ 51.921278] xhci_hcd 0000:39:00.0: Stop HCD [ 51.921281] xhci_hcd 0000:39:00.0: // Halt the HC [ 51.921289] xhci_hcd 0000:39:00.0: // Reset the HC [ 51.922289] xhci_hcd 0000:39:00.0: Wait for controller to be ready for doorbell rings [ 51.922350] xhci_hcd 0000:39:00.0: // Disabling event ring interrupts [ 51.922408] xhci_hcd 0000:39:00.0: cleaning up memory [ 51.922702] xhci_hcd 0000:39:00.0: Freed interrupters [ 51.922706] xhci_hcd 0000:39:00.0: Freed command ring [ 51.923193] xhci_hcd 0000:39:00.0: Freed segment pool [ 51.923231] xhci_hcd 0000:39:00.0: Freed device context pool [ 51.923233] xhci_hcd 0000:39:00.0: Freed small stream array pool [ 51.923242] xhci_hcd 0000:39:00.0: Freed medium stream array pool [ 51.923418] xhci_hcd 0000:39:00.0: xhci_stop completed - status = 1 [ 51.923420] xhci_hcd 0000:39:00.0: Initialize the xhci_hcd [ 51.923422] xhci_hcd 0000:39:00.0: xhci_init [ 51.923424] xhci_hcd 0000:39:00.0: xHCI doesn't need link TRB QUIRK [ 51.923428] xhci_hcd 0000:39:00.0: Supported page size register = 0x1 [ 51.923431] xhci_hcd 0000:39:00.0: Supported page size of 8K [ 51.923433] xhci_hcd 0000:39:00.0: HCD page size set to 4K [ 51.923443] xhci_hcd 0000:39:00.0: // xHC can handle at most 64 device slots. [ 51.923447] xhci_hcd 0000:39:00.0: // Setting Max device slots reg = 0x40. [ 51.923466] xhci_hcd 0000:39:00.0: // Device context base array address = 0x0x00000000fff65000 (DMA), 0000000017a20fd5 (virt) [ 51.923481] xhci_hcd 0000:39:00.0: Allocated command ring at 00000000b7b4f615 [ 51.923490] xhci_hcd 0000:39:00.0: First segment DMA is 0x0x00000000fff66000 [ 51.923496] xhci_hcd 0000:39:00.0: // Setting command ring address to 0x00000000fff66001 [ 51.923501] xhci_hcd 0000:39:00.0: // Doorbell array is located at offset 0x3000 from cap regs base addr [ 51.923503] xhci_hcd 0000:39:00.0: Allocating primary event ring [ 51.923531] xhci_hcd 0000:39:00.0: // Write event ring dequeue pointer, preserving EHB bit [ 51.923541] xhci_hcd 0000:39:00.0: Allocating 34 scratchpad buffers [ 51.923748] xhci_hcd 0000:39:00.0: Ext Cap 000000005f52db98, port offset = 1, count = 2, revision = 0x2 [ 51.923754] xhci_hcd 0000:39:00.0: PSIV:1 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:12 [ 51.923765] xhci_hcd 0000:39:00.0: PSIV:2 PSIE:1 PLT:0 PFD:0 LP:0 PSIM:1500 [ 51.923770] xhci_hcd 0000:39:00.0: PSIV:3 PSIE:2 PLT:0 PFD:0 LP:0 PSIM:480 [ 51.923773] xhci_hcd 0000:39:00.0: xHCI 1.0: support USB2 hardware lpm [ 51.923803] xhci_hcd 0000:39:00.0: Ext Cap 000000008a0032a2, port offset = 3, count = 2, revision = 0x3 [ 51.923815] xhci_hcd 0000:39:00.0: PSIV:4 PSIE:3 PLT:0 PFD:1 LP:0 PSIM:5 [ 51.923819] xhci_hcd 0000:39:00.0: PSIV:5 PSIE:3 PLT:0 PFD:1 LP:1 PSIM:10 [ 51.923822] xhci_hcd 0000:39:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports. [ 51.923827] xhci_hcd 0000:39:00.0: Finished xhci_init [ 51.923830] xhci_hcd 0000:39:00.0: Start the primary HCD [ 51.923832] xhci_hcd 0000:39:00.0: xhci_run [ 51.923842] xhci_hcd 0000:39:00.0: ERST deq = 64'hfff67000 [ 51.923847] xhci_hcd 0000:39:00.0: Finished xhci_run for main hcd [ 51.924027] xhci_hcd 0000:39:00.0: Start the secondary HCD [ 51.924030] xhci_hcd 0000:39:00.0: Enable interrupts [ 51.924033] xhci_hcd 0000:39:00.0: Enable primary interrupter [ 51.924039] xhci_hcd 0000:39:00.0: // Turn on HC, cmd = 0x5. [ 51.924050] xhci_hcd 0000:39:00.0: xhci_resume: starting usb3 port polling. [ 51.924108] usb usb4: usb resume [ 51.924108] usb usb3: usb resume [ 51.924126] hub 4-0:1.0: hub_reset_resume [ 51.924139] usb usb4: port-1 no _DSM function 5 [ 51.924143] usb usb4: port-1 disable U1/U2 _DSM: -19 [ 51.924150] usb usb4: port-2 no _DSM function 5 [ 51.924152] usb usb4: port-2 disable U1/U2 _DSM: -19 [ 51.924155] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 51.924163] xhci_hcd 0000:39:00.0: set port power 4-1 ON, portsc: 0x250 [ 51.924189] xhci_hcd 0000:39:00.0: set port power 4-2 ON, portsc: 0x2a0 [ 51.927873] nvme nvme0: 8/0/0 default/read/poll queues [ 51.935153] hub 3-0:1.0: hub_reset_resume [ 51.935158] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 51.935165] xhci_hcd 0000:39:00.0: set port power 3-1 ON, portsc: 0x2a0 [ 51.935250] xhci_hcd 0000:39:00.0: set port power 3-2 ON, portsc: 0x2a0 [ 51.942451] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x206e1 [ 51.942460] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 51.948063] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 51.948088] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 51.948099] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 51.948109] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 51.948118] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 51.948127] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 52.008513] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 52.008518] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x206e1, return 0x10101 [ 52.008524] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 52.008529] usb usb3-port1: status 0101 change 0001 [ 52.008533] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 52.066717] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x6e1 [ 52.066725] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x221203 [ 52.066729] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling. [ 52.066733] xhci_hcd 0000:39:00.0: Get port status 3-2 read: 0x2a0, return 0x100 [ 52.066740] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x221203, return 0x110203 [ 52.066762] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x6e1, return 0x101 [ 52.066777] usb usb4-port1: status 0203 change 0011 [ 52.066785] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 52.066791] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x201203 [ 52.066800] xhci_hcd 0000:00:14.0: clear USB_PORT_FEAT_SUSPEND [ 52.066801] xhci_hcd 0000:00:14.0: PORTSC 0663 [ 52.066805] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203 [ 52.066806] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x663, write 0x107e1 [ 52.066813] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x4007e3 [ 52.066815] xhci_hcd 0000:00:14.0: port resume event for port 7 [ 52.066815] xhci_hcd 0000:39:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0 [ 52.066820] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 52.083662] usb 1-5: Waited 0ms for CONNECT [ 52.083665] usb 1-5: finish reset-resume [ 52.083674] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0x791 [ 52.111603] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x7e3, write 0x10601 [ 52.111622] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400603 [ 52.111632] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 52.111636] usb 1-7: usb resume [ 52.112152] xhci_hcd 0000:00:14.0: underrun event on endpoint [ 52.112156] xhci_hcd 0000:00:14.0: overrun event on endpoint [ 52.140982] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 52.140989] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 52.155405] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 52.155431] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 52.159449] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x603, return 0x40103 [ 52.159479] xhci_hcd 0000:00:14.0: clear port7 suspend/resume change, portsc: 0x603 [ 52.171400] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203 [ 52.175400] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x6e1, return 0x101 [ 52.179362] usb 1-7: Waited 0ms for CONNECT [ 52.179371] usb 1-7: finish resume [ 52.191330] usb 4-1: Waited 0ms for CONNECT [ 52.191333] usb 4-1: finish reset-resume [ 52.191339] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203 [ 52.191352] xhci_hcd 0000:39:00.0: set port reset, actual port 4-1 status = 0x1311 [ 52.191809] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x201203 [ 52.191812] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling. [ 52.195295] usb 3-1: Waited 0ms for CONNECT [ 52.195297] usb 3-1: finish reset-resume [ 52.215278] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 52.215286] xhci_hcd 0000:00:14.0: // Ding dong! [ 52.215442] xhci_hcd 0000:00:14.0: Completed reset device command. [ 52.215479] xhci_hcd 0000:00:14.0: Successful reset device command. [ 52.215529] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 52.215535] xhci_hcd 0000:00:14.0: Slot already in default state [ 52.215924] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 52.217002] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0xf91 [ 52.227253] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 52.259158] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x201203, return 0x100203 [ 52.259191] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0x1203 [ 52.259211] xhci_hcd 0000:39:00.0: clear port1 warm(BH) reset change, portsc: 0x1203 [ 52.259227] xhci_hcd 0000:39:00.0: clear port1 link state change, portsc: 0x1203 [ 52.259245] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x1203 [ 52.259258] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x1203, return 0x203 [ 52.274290] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 52.274299] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 52.283024] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 52.283039] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 52.318989] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 52.318998] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.319153] xhci_hcd 0000:39:00.0: Slot 1 output ctx = 0x0x00000000fffd3000 (dma) [ 52.319166] xhci_hcd 0000:39:00.0: Slot 1 input ctx = 0x0x00000000fffd2000 (dma) [ 52.319182] xhci_hcd 0000:39:00.0: Set slot id 1 dcbaa entry 0000000003d5c81e to 0xfffd3000 [ 52.319267] xhci_hcd 0000:39:00.0: Slot ID 1: HW portnum 2, hcd portnum 0 [ 52.319271] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 52.319274] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 52.319278] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.319467] xhci_hcd 0000:39:00.0: Successful setup address command [ 52.319476] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 52.319480] xhci_hcd 0000:39:00.0: Slot ID 1 dcbaa entry @0000000003d5c81e = 0x000000fffd3000 [ 52.319486] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfffd3000 [ 52.319489] xhci_hcd 0000:39:00.0: Internal device address = 1 [ 52.319498] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd [ 52.342887] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 52.342895] xhci_hcd 0000:00:14.0: // Ding dong! [ 52.342906] xhci_hcd 0000:00:14.0: Completed reset device command. [ 52.342922] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state [ 52.342925] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 52.342933] xhci_hcd 0000:00:14.0: // Ding dong! [ 52.343166] xhci_hcd 0000:00:14.0: Successful setup address command [ 52.343174] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x000000fffff000 [ 52.343178] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @00000000f471be2e = 0x000000fffd7000 [ 52.343183] xhci_hcd 0000:00:14.0: Output Context DMA address = 0xfffd7000 [ 52.343186] xhci_hcd 0000:00:14.0: Internal device address = 1 [ 52.366176] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0x791 [ 52.366553] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 52.366574] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000165701f5 [ 52.366606] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8 [ 52.366613] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000165701f5 [ 52.366621] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.366872] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 52.367181] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change. [ 52.367190] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.367261] xhci_hcd 0000:39:00.0: Successful evaluate context command [ 52.367903] hub 4-1:1.0: hub_reset_resume [ 52.405074] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 52.405181] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006a5e7ca6 [ 52.405188] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006a5e7ca6 [ 52.405195] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x80 [ 52.405202] xhci_hcd 0000:00:14.0: add ep 0x85, slot id 1, new drop flags = 0x0, new add flags = 0x880 [ 52.405205] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 52.405211] xhci_hcd 0000:00:14.0: // Ding dong! [ 52.405414] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 52.406610] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 52.406959] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 52.421322] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03 [ 52.421330] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 52.430641] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503 [ 52.430664] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03 [ 52.468311] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports [ 52.468317] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device. [ 52.468322] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.468546] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 52.468553] hub 4-1:1.0: enabling power on all ports [ 52.474473] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 52.474483] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb4 port polling [ 52.474552] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling [ 52.490496] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 52.490504] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.490633] xhci_hcd 0000:39:00.0: Slot 2 output ctx = 0x0x00000000fffbd000 (dma) [ 52.490651] xhci_hcd 0000:39:00.0: Slot 2 input ctx = 0x0x00000000fffb7000 (dma) [ 52.490666] xhci_hcd 0000:39:00.0: Set slot id 2 dcbaa entry 00000000183911f5 to 0xfffbd000 [ 52.490726] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 52.490731] xhci_hcd 0000:39:00.0: Slot ID 2: HW portnum 0, hcd portnum 0 [ 52.490734] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 52.490737] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 52.490741] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.490870] xhci_hcd 0000:39:00.0: Successful setup context command [ 52.490878] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 52.490882] xhci_hcd 0000:39:00.0: Slot ID 2 dcbaa entry @00000000183911f5 = 0x000000fffbd000 [ 52.490887] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfffbd000 [ 52.490890] xhci_hcd 0000:39:00.0: Internal device address = 0 [ 52.491189] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 52.491270] xhci_hcd 0000:39:00.0: set port reset, actual port 3-1 status = 0xf91 [ 52.546318] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x200e03 [ 52.546326] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 52.562263] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x200e03, return 0x100503 [ 52.562305] xhci_hcd 0000:39:00.0: clear port1 reset change, portsc: 0xe03 [ 52.622126] xhci_hcd 0000:39:00.0: Resetting device with slot ID 2 [ 52.622134] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.622146] xhci_hcd 0000:39:00.0: Completed reset device command. [ 52.622163] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 2) in default state [ 52.622167] xhci_hcd 0000:39:00.0: Not freeing device rings. [ 52.622177] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.622366] xhci_hcd 0000:39:00.0: Successful setup address command [ 52.622377] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 52.622382] xhci_hcd 0000:39:00.0: Slot ID 2 dcbaa entry @00000000183911f5 = 0x000000fffbd000 [ 52.622387] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfffbd000 [ 52.622391] xhci_hcd 0000:39:00.0: Internal device address = 2 [ 52.643131] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 52.643216] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000026434e36 [ 52.643242] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 2, new drop flags = 0x0, new add flags = 0x8 [ 52.643248] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000026434e36 [ 52.643254] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.643516] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 52.643694] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000026434e36 [ 52.643714] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 2, new drop flags = 0x8, new add flags = 0x0 [ 52.643736] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 2, new drop flags = 0x8, new add flags = 0x8 [ 52.643741] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000026434e36 [ 52.643746] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.644020] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 52.644365] hub 3-1:1.0: hub_reset_resume [ 52.644386] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports [ 52.644390] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device. [ 52.644395] xhci_hcd 0000:39:00.0: // Ding dong! [ 52.644653] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 52.644660] hub 3-1:1.0: enabling power on all ports [ 52.721799] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling [ 52.853663] usb 4-1-port1: status 0203 change 0011 [ 52.854572] usb 4-1-port4: status 0203 change 0011 [ 52.981169] usb 4-1.4: Waited 0ms for CONNECT [ 52.981175] usb 4-1.4: finish reset-resume [ 52.981186] usb 4-1.1: Waited 0ms for CONNECT [ 52.981189] usb 4-1.1: finish reset-resume [ 52.995990] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 53.061061] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 53.061069] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.061169] xhci_hcd 0000:39:00.0: Slot 3 output ctx = 0x0x00000000fff9c000 (dma) [ 53.061186] xhci_hcd 0000:39:00.0: Slot 3 input ctx = 0x0x00000000fff85000 (dma) [ 53.061191] xhci_hcd 0000:39:00.0: Set slot id 3 dcbaa entry 00000000be98e2dc to 0xfff9c000 [ 53.061224] xhci_hcd 0000:39:00.0: Slot ID 3: HW portnum 2, hcd portnum 0 [ 53.061226] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 53.061228] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 53.061231] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.061357] xhci_hcd 0000:39:00.0: Successful setup address command [ 53.061364] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.061367] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @00000000be98e2dc = 0x000000fff9c000 [ 53.061370] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff9c000 [ 53.061372] xhci_hcd 0000:39:00.0: Internal device address = 3 [ 53.061379] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 53.082185] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.082267] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000005d67d675 [ 53.082272] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000005d67d675 [ 53.082288] xhci_hcd 0000:39:00.0: add ep 0x1, slot id 3, new drop flags = 0x0, new add flags = 0x4 [ 53.082301] xhci_hcd 0000:39:00.0: add ep 0x82, slot id 3, new drop flags = 0x0, new add flags = 0x24 [ 53.082303] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000005d67d675 [ 53.082308] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.082606] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.082740] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change. [ 53.082745] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.082764] xhci_hcd 0000:39:00.0: Successful evaluate context command [ 53.141221] usb 3-1-port1: status 0101 change 0001 [ 53.142179] usb 3-1-port5: status 0501 change 0001 [ 53.160697] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 53.160709] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.160744] xhci_hcd 0000:39:00.0: Slot 4 output ctx = 0x0x00000000fff71000 (dma) [ 53.160771] xhci_hcd 0000:39:00.0: Slot 4 input ctx = 0x0x00000000fff52000 (dma) [ 53.160792] xhci_hcd 0000:39:00.0: Set slot id 4 dcbaa entry 00000000c53fb650 to 0xfff71000 [ 53.160911] xhci_hcd 0000:39:00.0: Slot ID 4: HW portnum 2, hcd portnum 0 [ 53.160918] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 53.160922] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 53.160928] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.161124] xhci_hcd 0000:39:00.0: Successful setup address command [ 53.161132] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.161137] xhci_hcd 0000:39:00.0: Slot ID 4 dcbaa entry @00000000c53fb650 = 0x000000fff71000 [ 53.161144] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff71000 [ 53.161149] xhci_hcd 0000:39:00.0: Internal device address = 4 [ 53.161160] usb 4-1.1: reset SuperSpeed USB device number 3 using xhci_hcd [ 53.208566] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.208651] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000000171ace6 [ 53.208688] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 4, new drop flags = 0x0, new add flags = 0x8 [ 53.208694] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000000171ace6 [ 53.208702] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.209093] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.209326] xhci_hcd 0000:39:00.0: Set up evaluate context for LPM MEL change. [ 53.209334] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.209358] xhci_hcd 0000:39:00.0: Successful evaluate context command [ 53.210584] hub 4-1.1:1.0: hub_reset_resume [ 53.268526] usb 3-1.5: Waited 0ms for CONNECT [ 53.268528] usb 3-1.1: Waited 0ms for CONNECT [ 53.268533] usb 3-1.5: finish reset-resume [ 53.268535] usb 3-1.1: finish reset-resume [ 53.311070] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports [ 53.311079] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device. [ 53.311085] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.311446] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.311455] hub 4-1.1:1.0: enabling power on all ports [ 53.348298] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 53.348305] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.348399] xhci_hcd 0000:39:00.0: Slot 5 output ctx = 0x0x00000000fff40000 (dma) [ 53.348422] xhci_hcd 0000:39:00.0: Slot 5 input ctx = 0x0x00000000fff33000 (dma) [ 53.348435] xhci_hcd 0000:39:00.0: Set slot id 5 dcbaa entry 00000000ed6a3a49 to 0xfff40000 [ 53.348471] usb 3-1.5: reset high-speed USB device number 4 using xhci_hcd [ 53.348476] xhci_hcd 0000:39:00.0: Slot ID 5: HW portnum 0, hcd portnum 0 [ 53.348479] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 53.348481] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 53.348485] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.348511] xhci_hcd 0000:39:00.0: Successful setup context command [ 53.348517] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.348519] xhci_hcd 0000:39:00.0: Slot ID 5 dcbaa entry @00000000ed6a3a49 = 0x000000fff40000 [ 53.348523] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff40000 [ 53.348525] xhci_hcd 0000:39:00.0: Internal device address = 0 [ 53.348590] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.432045] xhci_hcd 0000:39:00.0: Resetting device with slot ID 5 [ 53.432049] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.432057] xhci_hcd 0000:39:00.0: Completed reset device command. [ 53.432128] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 5) in default state [ 53.432131] xhci_hcd 0000:39:00.0: Not freeing device rings. [ 53.432136] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.432223] xhci_hcd 0000:39:00.0: Successful setup address command [ 53.432229] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.432231] xhci_hcd 0000:39:00.0: Slot ID 5 dcbaa entry @00000000ed6a3a49 = 0x000000fff40000 [ 53.432233] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff40000 [ 53.432235] xhci_hcd 0000:39:00.0: Internal device address = 5 [ 53.503251] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.503340] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000bff19ff2 [ 53.579669] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 53.579677] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.579772] xhci_hcd 0000:39:00.0: Slot 6 output ctx = 0x0x00000000fff2f000 (dma) [ 53.579781] xhci_hcd 0000:39:00.0: Slot 6 input ctx = 0x0x00000000fff2e000 (dma) [ 53.579793] xhci_hcd 0000:39:00.0: Set slot id 6 dcbaa entry 000000008d78de5b to 0xfff2f000 [ 53.579860] usb 3-1.1: reset high-speed USB device number 3 using xhci_hcd [ 53.579865] xhci_hcd 0000:39:00.0: Slot ID 6: HW portnum 0, hcd portnum 0 [ 53.579868] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 53.579870] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 53.579872] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.579953] xhci_hcd 0000:39:00.0: Successful setup context command [ 53.579962] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.579965] xhci_hcd 0000:39:00.0: Slot ID 6 dcbaa entry @000000008d78de5b = 0x000000fff2f000 [ 53.579969] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff2f000 [ 53.579971] xhci_hcd 0000:39:00.0: Internal device address = 0 [ 53.580213] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.685050] usb 4-1.1-port3: status 0203 change 0011 [ 53.707592] xhci_hcd 0000:39:00.0: Resetting device with slot ID 6 [ 53.707608] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.707662] xhci_hcd 0000:39:00.0: Completed reset device command. [ 53.707720] xhci_hcd 0000:39:00.0: Can't reset device (slot ID 6) in default state [ 53.707728] xhci_hcd 0000:39:00.0: Not freeing device rings. [ 53.707747] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.708108] xhci_hcd 0000:39:00.0: Successful setup address command [ 53.708121] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.708127] xhci_hcd 0000:39:00.0: Slot ID 6 dcbaa entry @000000008d78de5b = 0x000000fff2f000 [ 53.708134] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff2f000 [ 53.708138] xhci_hcd 0000:39:00.0: Internal device address = 6 [ 53.729197] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.729298] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000090dba51e [ 53.729345] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 6, new drop flags = 0x0, new add flags = 0x8 [ 53.729352] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000090dba51e [ 53.729361] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.730188] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.730708] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000090dba51e [ 53.730739] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 6, new drop flags = 0x8, new add flags = 0x0 [ 53.730780] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 6, new drop flags = 0x8, new add flags = 0x8 [ 53.730785] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000090dba51e [ 53.730793] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.731492] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.732355] hub 3-1.1:1.0: hub_reset_resume [ 53.732394] xhci_hcd 0000:39:00.0: xHCI version 110 needs hub TT think time and number of ports [ 53.732400] xhci_hcd 0000:39:00.0: Set up configure endpoint for hub device. [ 53.732408] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.733247] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.733261] hub 3-1.1:1.0: enabling power on all ports [ 53.811340] r8152-cfgselector 4-1.1.3: Waited 0ms for CONNECT [ 53.811355] r8152-cfgselector 4-1.1.3: finish reset-resume [ 53.915234] xhci_hcd 0000:39:00.0: The device to be reset with slot ID 0 does not exist. Re-allocate the device [ 53.915253] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.915306] xhci_hcd 0000:39:00.0: Slot 7 output ctx = 0x0x00000000fff19000 (dma) [ 53.915346] xhci_hcd 0000:39:00.0: Slot 7 input ctx = 0x0x00000000fff23000 (dma) [ 53.915357] xhci_hcd 0000:39:00.0: Set slot id 7 dcbaa entry 00000000f1679a51 to 0xfff19000 [ 53.915496] xhci_hcd 0000:39:00.0: Slot ID 7: HW portnum 2, hcd portnum 0 [ 53.915502] xhci_hcd 0000:39:00.0: udev->tt = 0000000000000000 [ 53.915506] xhci_hcd 0000:39:00.0: udev->ttport = 0x0 [ 53.915512] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.915564] xhci_hcd 0000:39:00.0: Successful setup address command [ 53.915573] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 53.915578] xhci_hcd 0000:39:00.0: Slot ID 7 dcbaa entry @00000000f1679a51 = 0x000000fff19000 [ 53.915584] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff19000 [ 53.915589] xhci_hcd 0000:39:00.0: Internal device address = 7 [ 53.915600] r8152-cfgselector 4-1.1.3: reset SuperSpeed USB device number 5 using xhci_hcd [ 53.935355] r8152-cfgselector 4-1.1.3: USB quirks for this device: 400 [ 53.935722] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 53.935747] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000813b8fd0 [ 53.935756] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000813b8fd0 [ 53.935761] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 00000000813b8fd0 [ 53.935804] xhci_hcd 0000:39:00.0: add ep 0x81, slot id 7, new drop flags = 0x0, new add flags = 0x8 [ 53.935828] xhci_hcd 0000:39:00.0: add ep 0x2, slot id 7, new drop flags = 0x0, new add flags = 0x18 [ 53.935852] xhci_hcd 0000:39:00.0: add ep 0x83, slot id 7, new drop flags = 0x0, new add flags = 0x98 [ 53.935858] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000813b8fd0 [ 53.935866] xhci_hcd 0000:39:00.0: // Ding dong! [ 53.936374] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 53.939333] r8152 4-1.1.3:1.0: skip request firmware [ 54.227731] PM: resume of devices complete after 2315.902 msecs [ 54.231954] OOM killer enabled. [ 54.231959] Restarting tasks ... [ 54.232022] pci_bus 0000:04: Allocating resources [ 54.232062] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 54.232084] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 54.232084] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 54.232092] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 54.232102] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 54.232107] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0010 [ 54.232115] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 54.232115] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080 [ 54.232124] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 54.232144] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x603, return 0x103 [ 54.232162] hub 3-1:1.0: state 7 ports 5 chg 0000 evt 0000 [ 54.232188] hub 4-1.1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 54.232726] pci_bus 0000:04: Allocating resources [ 54.232755] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 54.232761] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 54.232763] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 54.232766] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 54.232768] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 54.232779] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 54.234065] xhci_hcd 0000:00:14.0: // Ding dong! [ 54.234080] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 6 [ 54.234087] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 5 [ 54.234090] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 4 [ 54.234098] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-1 status = 0xe0002a0 [ 54.234118] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 3 [ 54.234121] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 2 [ 54.234123] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 0 [ 54.234133] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-2 status = 0xe0002a0 [ 54.234147] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-3 status = 0xe0002a0 [ 54.234171] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-4 status = 0xe0002a0 [ 54.234321] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-5 status = 0xe0002a0 [ 54.234335] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-6 status = 0xe0002a0 [ 54.234344] hub 2-0:1.0: hub_suspend [ 54.234355] usb usb2: bus auto-suspend, wakeup 1 [ 54.234375] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 54.234290] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 54.234549] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x603, write 0x10661 [ 54.234599] hub 3-1.1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 54.234607] hub 3-1.1:1.0: hub_suspend [ 54.234614] xhci_hcd 0000:39:00.0: Cancel URB 00000000d865e9ea, dev 1.1, ep 0x81, starting at offset 0xfff1d000 [ 54.234621] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.234635] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 6 ep 2 [ 54.234639] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff1d000 (dma) in stream 0 URB 00000000d865e9ea [ 54.234643] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff1d010, cycle 1 [ 54.234646] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.234649] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000d865e9ea TD as cancel_status is 2 [ 54.234674] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff1d010 [ 54.234677] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000d865e9ea TD [ 54.234680] xhci_hcd 0000:39:00.0: Giveback URB 00000000d865e9ea, len = 0, expected = 1, status = -115 [ 54.234684] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 54.234975] done. [ 54.234998] random: crng reseeded on system resumption [ 54.235123] usb 3-1.1: usb auto-suspend, wakeup 1 [ 54.238859] xhci_hcd 0000:39:00.0: Transfer error for slot 3 ep 1 on endpoint [ 54.238867] xhci_hcd 0000:39:00.0: Soft-reset ep 1, slot 3 [ 54.238872] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.238897] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.245860] xhci_hcd 0000:39:00.0: Transfer error for slot 3 ep 1 on endpoint [ 54.245868] xhci_hcd 0000:39:00.0: Soft-reset ep 1, slot 3 [ 54.245873] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.245897] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.252860] xhci_hcd 0000:39:00.0: Transfer error for slot 3 ep 1 on endpoint [ 54.252868] xhci_hcd 0000:39:00.0: Soft-reset ep 1, slot 3 [ 54.252872] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.252897] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.254138] usb 1-7: usb auto-suspend, wakeup 0 [ 54.259859] xhci_hcd 0000:39:00.0: Transfer error for slot 3 ep 1 on endpoint [ 54.259866] xhci_hcd 0000:39:00.0: Soft-reset ep 1, slot 3 [ 54.259871] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.259896] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.266862] xhci_hcd 0000:39:00.0: Transfer error for slot 3 ep 1 on endpoint [ 54.266871] xhci_hcd 0000:39:00.0: Hard-reset ep 1, slot 3 [ 54.266876] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.266897] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.266900] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff75000 (dma) in stream 0 URB 00000000a9c75c76 [ 54.266906] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff75010, cycle 1 [ 54.266909] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.266912] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 54.266937] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff75010 [ 54.266940] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 54.266943] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 31, status = -71 [ 54.266948] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 54.277953] PM: suspend exit [ 54.286187] usb 4-1-port4: not reset yet, waiting 10ms [ 54.306125] usb 4-1-port4: not reset yet, waiting 10ms [ 54.330255] usb 4-1-port4: not reset yet, waiting 200ms [ 54.500078] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.500180] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0010 [ 54.516169] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.532084] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.537774] usb 4-1-port4: not reset yet, waiting 200ms [ 54.548178] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.564178] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.580169] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.593501] xhci_hcd 0000:00:14.0: // Ding dong! [ 54.593538] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 10 [ 54.593555] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 6 [ 54.593563] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 0 [ 54.593587] xhci_hcd 0000:00:14.0: Set port 1-5 link state, portsc: 0xe03, write 0x10e61 [ 54.596176] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.612173] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.613629] usb 1-5: usb auto-suspend, wakeup 0 [ 54.619835] wlp2s0: VHT information is missing, disabling VHT [ 54.628083] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.633495] hub 1-0:1.0: hub_suspend [ 54.633539] usb usb1: bus auto-suspend, wakeup 1 [ 54.633579] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 54.633599] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633610] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633619] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633627] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633635] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633642] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633650] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633657] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633665] xhci_hcd 0000:00:14.0: config port 1-3 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633672] xhci_hcd 0000:00:14.0: config port 1-4 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633680] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633689] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633696] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633703] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633711] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633718] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 54.633724] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling. [ 54.633736] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 54.633858] xhci_hcd 0000:00:14.0: hcd_pci_runtime_suspend: 0 [ 54.644169] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.660173] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.664656] wlp2s0: authenticate with 6c:f3:7f:10:a0:fa (local address=9c:b6:d0:89:88:7d) [ 54.664672] wlp2s0: send auth to 6c:f3:7f:10:a0:fa (try 1/3) [ 54.676012] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.679594] wlp2s0: authenticated [ 54.681278] wlp2s0: associate with 6c:f3:7f:10:a0:fa (try 1/3) [ 54.691535] wlp2s0: RX AssocResp from 6c:f3:7f:10:a0:fa (capab=0x401 status=0 aid=1) [ 54.691993] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.695051] wlp2s0: associated [ 54.707994] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.723994] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.740042] xhci_hcd 0000:39:00.0: ep 0x81 - asked for 2 bytes, 1 bytes untransferred [ 54.804987] xhci_hcd 0000:39:00.0: Resetting device with slot ID 3 [ 54.805006] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.805253] xhci_hcd 0000:39:00.0: Completed reset device command. [ 54.805281] xhci_hcd 0000:39:00.0: Successful reset device command. [ 54.805354] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.805428] xhci_hcd 0000:39:00.0: Successful setup address command [ 54.805438] xhci_hcd 0000:39:00.0: Op regs DCBAA ptr = 0x000000fff65000 [ 54.805445] xhci_hcd 0000:39:00.0: Slot ID 3 dcbaa entry @00000000be98e2dc = 0x000000fff9c000 [ 54.805453] xhci_hcd 0000:39:00.0: Output Context DMA address = 0xfff9c000 [ 54.805459] xhci_hcd 0000:39:00.0: Internal device address = 3 [ 54.805472] usb 4-1.4: reset SuperSpeed USB device number 4 using xhci_hcd [ 54.829933] xhci_hcd 0000:39:00.0: Waiting for status stage event [ 54.829959] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000005d67d675 [ 54.829969] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 000000005d67d675 [ 54.829983] xhci_hcd 0000:39:00.0: add ep 0x1, slot id 3, new drop flags = 0x0, new add flags = 0x4 [ 54.829996] xhci_hcd 0000:39:00.0: add ep 0x82, slot id 3, new drop flags = 0x0, new add flags = 0x24 [ 54.830002] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 000000005d67d675 [ 54.830011] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.830518] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 54.830644] xhci_hcd 0000:39:00.0: endpoint disable with ep_state 0x40 [ 54.831311] hub 4-1:1.0: state 7 ports 4 chg 0000 evt 0000 [ 54.831330] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 54.831338] xhci_hcd 0000:39:00.0: Giveback URB 000000002e499df5, len = 18, expected = 96, status = 0 [ 54.831384] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 3 ep 4 [ 54.831391] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 3 [ 54.831398] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.831421] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.831427] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff75020 (dma) in stream 0 URB 00000000a9c75c76 [ 54.831436] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff75030, cycle 1 [ 54.831441] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.831447] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 54.831455] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff75030 [ 54.831461] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 54.831467] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 54.831475] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 54.849461] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 54.849476] xhci_hcd 0000:39:00.0: Giveback URB 000000000589b15a, len = 18, expected = 96, status = 0 [ 54.849642] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 3 ep 4 [ 54.849655] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 3 [ 54.849665] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.849683] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 54.849689] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff75060 (dma) in stream 0 URB 00000000a9c75c76 [ 54.849700] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff75070, cycle 1 [ 54.849705] xhci_hcd 0000:39:00.0: // Ding dong! [ 54.849711] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 54.849720] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff75070 [ 54.849726] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 54.849731] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 54.849741] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 56.845684] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 56.845690] xhci_hcd 0000:39:00.0: Giveback URB 00000000724386db, len = 18, expected = 96, status = 0 [ 56.845780] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 3 ep 4 [ 56.845784] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 3 [ 56.845787] xhci_hcd 0000:39:00.0: // Ding dong! [ 56.845799] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 56.845801] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff750a0 (dma) in stream 0 URB 00000000a9c75c76 [ 56.845804] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff750b0, cycle 1 [ 56.845805] xhci_hcd 0000:39:00.0: // Ding dong! [ 56.845808] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 56.845894] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff750b0 [ 56.845898] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 56.845900] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 56.845902] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 56.877566] xhci_hcd 0000:39:00.0: ep 0x82 - asked for 96 bytes, 78 bytes untransferred [ 56.877569] xhci_hcd 0000:39:00.0: Giveback URB 00000000724386db, len = 18, expected = 96, status = 0 [ 56.877662] xhci_hcd 0000:39:00.0: Stalled endpoint for slot 3 ep 4 [ 56.877665] xhci_hcd 0000:39:00.0: Hard-reset ep 4, slot 3 [ 56.877667] xhci_hcd 0000:39:00.0: // Ding dong! [ 56.877679] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 56.877681] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfff750e0 (dma) in stream 0 URB 00000000a9c75c76 [ 56.877683] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfff750f0, cycle 1 [ 56.877685] xhci_hcd 0000:39:00.0: // Ding dong! [ 56.877687] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000a9c75c76 TD as cancel_status is 2 [ 56.877774] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fff750f0 [ 56.877777] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000a9c75c76 TD [ 56.877779] xhci_hcd 0000:39:00.0: Giveback URB 00000000a9c75c76, len = 0, expected = 13, status = -32 [ 56.877782] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 57.621539] r8152 4-1.1.3:1.0 enx00e04ceb9e75: carrier on [ 58.374197] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x202a0 [ 58.374219] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 58.374302] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 58.374325] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x202a0, return 0x10100 [ 58.374366] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x2a0 [ 58.374384] usb usb3-port1: status 0100, change 0001, 12 Mb/s [ 58.374404] usb 3-1: USB disconnect, device number 2 [ 58.374412] usb 3-1.1: USB disconnect, device number 3 [ 58.374418] usb 3-1.1: unregistering device [ 58.374423] usb 3-1.1: unregistering interface 3-1.1:1.0 [ 58.374958] usb 3-1.1: usb_disable_device nuking all URBs [ 58.374969] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000090dba51e [ 58.375012] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 6, new drop flags = 0x8, new add flags = 0x0 [ 58.375022] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000090dba51e [ 58.375035] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.375561] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 58.375937] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.376008] usb 3-1.5: USB disconnect, device number 4 [ 58.376016] usb 3-1.5: unregistering device [ 58.376022] usb 3-1.5: unregistering interface 3-1.5:1.0 [ 58.376106] usb 3-1.5: usb_disable_device nuking all URBs [ 58.376115] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 00000000bff19ff2 [ 58.376416] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.376473] usb 3-1: unregistering device [ 58.376479] usb 3-1: unregistering interface 3-1:1.0 [ 58.376605] xhci_hcd 0000:39:00.0: Cancel URB 00000000907dd69b, dev 1, ep 0x81, starting at offset 0xfffa4000 [ 58.376617] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.376624] xhci_hcd 0000:39:00.0: shutdown urb 00000000907dd69b ep1in-intr [ 58.376637] xhci_hcd 0000:39:00.0: Stopped on Transfer TRB for slot 2 ep 2 [ 58.376646] xhci_hcd 0000:39:00.0: Removing canceled TD starting at 0xfffa4000 (dma) in stream 0 URB 00000000907dd69b [ 58.376656] xhci_hcd 0000:39:00.0: Set TR Deq ptr 0xfffa4010, cycle 1 [ 58.376663] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.376668] xhci_hcd 0000:39:00.0: xhci_giveback_invalidated_tds: Keep cancelled URB 00000000907dd69b TD as cancel_status is 2 [ 58.376678] xhci_hcd 0000:39:00.0: Successful Set TR Deq Ptr cmd, deq = @fffa4010 [ 58.376684] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: Giveback cancelled URB 00000000907dd69b TD [ 58.376690] xhci_hcd 0000:39:00.0: Giveback URB 00000000907dd69b, len = 0, expected = 1, status = -115 [ 58.376700] xhci_hcd 0000:39:00.0: xhci_handle_cmd_set_deq: All TDs cleared, ring doorbell [ 58.377032] usb 3-1: usb_disable_device nuking all URBs [ 58.377041] xhci_hcd 0000:39:00.0: xhci_drop_endpoint called for udev 0000000026434e36 [ 58.377070] xhci_hcd 0000:39:00.0: drop ep 0x81, slot id 2, new drop flags = 0x8, new add flags = 0x0 [ 58.377079] xhci_hcd 0000:39:00.0: xhci_check_bandwidth called for udev 0000000026434e36 [ 58.377088] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.377511] xhci_hcd 0000:39:00.0: Successful Endpoint Configure command [ 58.377847] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.377934] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x2a0, return 0x100 [ 58.395103] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x206e1 [ 58.395111] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 58.411440] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x206e1, return 0x10101 [ 58.411466] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x6e1 [ 58.415422] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling [ 58.447455] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x6e1, return 0x101 [ 58.483375] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x6e1, return 0x101 [ 58.507019] xhci_hcd 0000:39:00.0: Port change event, 3-1, id 1, portsc: 0x202a0 [ 58.507041] xhci_hcd 0000:39:00.0: handle_port_status: starting usb3 port polling. [ 58.519138] xhci_hcd 0000:39:00.0: Port change event, 4-1, id 3, portsc: 0x4202c0 [ 58.519158] xhci_hcd 0000:39:00.0: handle_port_status: starting usb4 port polling. [ 58.519258] xhci_hcd 0000:39:00.0: Get port status 3-1 read: 0x202a0, return 0x10100 [ 58.519281] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 58.519296] xhci_hcd 0000:39:00.0: Get port status 4-1 read: 0x4202c0, return 0x4102c0 [ 58.519325] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x4002c0 [ 58.519346] xhci_hcd 0000:39:00.0: clear port1 connect change, portsc: 0x2a0 [ 58.519359] usb usb4-port1: link state change [ 58.519368] xhci_hcd 0000:39:00.0: clear port1 link state change, portsc: 0x2c0 [ 58.519379] xhci_hcd 0000:39:00.0: Transfer error for slot 7 ep 6 on endpoint [ 58.519388] xhci_hcd 0000:39:00.0: Soft-reset ep 6, slot 7 [ 58.519397] xhci_hcd 0000:39:00.0: // Ding dong! [ 58.519415] xhci_hcd 0000:39:00.0: Ignoring reset ep completion code of 1 [ 58.592820] xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead [ 58.592826] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 1, ep index 0 [ 58.592829] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 1, ep index 2 [ 58.592834] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 3, ep index 0 [ 58.592836] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 3, ep index 1 [ 58.592837] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 3, ep index 4 [ 58.592838] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 4, ep index 0 [ 58.592840] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 4, ep index 2 [ 58.592842] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 7, ep index 0 [ 58.592857] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 7, ep index 2 [ 58.592862] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 7, ep index 3 [ 58.592863] xhci_hcd 0000:39:00.0: Killing URBs for slot ID 7, ep index 6 [ 58.592865] xhci_hcd 0000:39:00.0: HC died; cleaning up [ 58.592873] xhci_hcd 0000:39:00.0: CTRL: TypeReq=0xa300 val=0x0 idx=0x1 len=4 ==> -19 [ 58.592885] r8152 4-1.1.3:1.0 enx00e04ceb9e75: Stop submitting intr, status -108 [ 58.651159] usb usb4-port1: Wait for inactive link disconnect detect [ 58.651213] hub 3-0:1.0: state 0 ports 2 chg 0000 evt 0002 [ 58.663176] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb4 port polling [ 58.663185] xhci_hcd 0000:39:00.0: xhci_hub_status_data: stopping usb3 port polling [ 58.675635] xhci_hcd 0000:39:00.0: remove, state 1 [ 58.675640] xhci_hcd 0000:39:00.0: roothub graceful disconnect [ 58.675643] usb usb4: USB disconnect, device number 1 [ 58.678944] usb usb4-port1: Wait for inactive link disconnect detect [ 58.706881] usb usb4-port1: Wait for inactive link disconnect detect [ 58.734827] usb usb4-port1: Wait for inactive link disconnect detect [ 58.767122] usb usb4-port1: Wait for inactive link disconnect detect [ 58.767140] usb usb4-port1: do warm reset, port only [ 58.767286] usb usb4-port1: status 02c0, change 0041, 10.0 Gb/s [ 58.767296] usb 4-1: USB disconnect, device number 2 [ 58.767305] usb 4-1.1: USB disconnect, device number 3 [ 58.767312] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5 [ 58.767317] r8152-cfgselector 4-1.1.3: unregistering device [ 58.767322] r8152-cfgselector 4-1.1.3: unregistering interface 4-1.1.3:1.0 [ 58.822780] r8152-cfgselector 4-1.1.3: usb_disable_device nuking all URBs [ 58.823786] usb 4-1.1: unregistering device [ 58.823793] usb 4-1.1: unregistering interface 4-1.1:1.0 [ 58.824732] usb 4-1.1: usb_disable_device nuking all URBs [ 58.825105] usb 4-1.4: USB disconnect, device number 4 [ 58.825109] usb 4-1.4: unregistering device [ 58.825112] usb 4-1.4: unregistering interface 4-1.4:1.0 [ 59.006872] usb 4-1.4: usb_disable_device nuking all URBs [ 59.007207] usb 4-1: unregistering device [ 59.007217] usb 4-1: unregistering interface 4-1:1.0 [ 59.008050] usb 4-1: usb_disable_device nuking all URBs [ 59.009282] hub 4-0:1.0: state 0 ports 2 chg 0000 evt 0000 [ 59.009523] usb usb4: unregistering device [ 59.009529] usb usb4: unregistering interface 4-0:1.0 [ 59.010375] usb usb4: usb_disable_device nuking all URBs [ 59.010384] xHCI xhci_drop_endpoint called for root hub [ 59.010389] xHCI xhci_check_bandwidth called for root hub [ 59.013559] xhci_hcd 0000:39:00.0: USB bus 4 deregistered [ 59.013582] xhci_hcd 0000:39:00.0: remove, state 1 [ 59.013586] xhci_hcd 0000:39:00.0: roothub graceful disconnect [ 59.013591] usb usb3: USB disconnect, device number 1 [ 59.013594] usb usb3: unregistering device [ 59.013596] usb usb3: unregistering interface 3-0:1.0 [ 59.013758] usb usb3: usb_disable_device nuking all URBs [ 59.013763] xHCI xhci_drop_endpoint called for root hub [ 59.013767] xHCI xhci_check_bandwidth called for root hub [ 59.013986] xhci_hcd 0000:39:00.0: // Halt the HC [ 59.013995] xhci_hcd 0000:39:00.0: Host halt failed, -19 [ 59.013998] xhci_hcd 0000:39:00.0: Host not accessible, reset failed. [ 59.014000] xhci_hcd 0000:39:00.0: // Disabling event ring interrupts [ 59.014006] xhci_hcd 0000:39:00.0: cleaning up memory [ 59.014016] xhci_hcd 0000:39:00.0: Freed interrupters [ 59.014019] xhci_hcd 0000:39:00.0: Freed command ring [ 59.014111] xhci_hcd 0000:39:00.0: Freed segment pool [ 59.014146] xhci_hcd 0000:39:00.0: Freed device context pool [ 59.014148] xhci_hcd 0000:39:00.0: Freed small stream array pool [ 59.014151] xhci_hcd 0000:39:00.0: Freed medium stream array pool [ 59.014265] xhci_hcd 0000:39:00.0: xhci_stop completed - status = ffffffff [ 59.014490] xhci_hcd 0000:39:00.0: USB bus 3 deregistered [ 59.030647] pci_bus 0000:04: Allocating resources [ 59.030664] pcieport 0000:04:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000 [ 59.030671] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 59.030673] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 59.030676] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 59.030677] pcieport 0000:04:02.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 63.702106] snd_hda_intel 0000:00:1f.3: Unstable LPIB (254776 >= 8192); disabling LPIB delay counting [ 63.729395] pcieport 0000:04:00.0: Unable to change power state from D3hot to D0, device inaccessible [ 63.732881] pci_bus 0000:05: busn_res: [bus 05] is released [ 63.734100] pci_bus 0000:06: busn_res: [bus 06-38] is released [ 63.734600] pci_bus 0000:39: busn_res: [bus 39] is released [ 63.735265] pci_bus 0000:3a: busn_res: [bus 3a-6d] is released [ 63.735872] pci_bus 0000:04: busn_res: [bus 04-6d] is released [ 67.153248] PM: suspend entry (deep) [ 67.163498] Filesystems sync: 0.010 seconds [ 67.167654] Freezing user space processes [ 67.169870] Freezing user space processes completed (elapsed 0.002 seconds) [ 67.169875] OOM killer disabled. [ 67.169881] Freezing remaining freezable tasks [ 67.171104] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 67.171170] printk: Suspending console(s) (use no_console_suspend to debug) [ 67.207211] wlp2s0: deauthenticating from 6c:f3:7f:10:a0:fa by local choice (Reason: 3=DEAUTH_LEAVING) [ 67.226021] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 67.226213] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 67.226234] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 67.226257] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 67.226262] xhci_hcd 0000:00:14.0: hcd_pci_runtime_resume: 0 [ 67.226275] usb usb2: usb auto-resume [ 67.226324] usb usb1: usb auto-resume [ 67.226333] hub 2-0:1.0: hub_resume [ 67.226382] hub 1-0:1.0: hub_resume [ 67.226394] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 67.226426] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100 [ 67.226446] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x2a0, return 0x100 [ 67.226463] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x2a0, return 0x100 [ 67.226480] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0xe63, return 0x507 [ 67.226489] usb usb1-port5: status 0507 change 0000 [ 67.226501] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 67.226518] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 67.226527] usb usb1-port7: status 0107 change 0000 [ 67.226538] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 67.226554] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 67.226570] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 67.226587] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 67.226603] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 67.226619] hub 1-0:1.0: hub_suspend [ 67.226633] usb usb1: bus suspend, wakeup 0 [ 67.252811] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 67.252856] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 67.252957] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 67.253021] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 67.253086] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 67.253151] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 67.253171] hub 2-0:1.0: hub_suspend [ 67.253186] usb usb2: bus suspend, wakeup 0 [ 67.322717] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322738] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322748] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322757] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322765] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322771] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322780] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322788] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322793] xhci_hcd 0000:00:14.0: config port 1-3 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322800] xhci_hcd 0000:00:14.0: config port 1-4 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322807] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322816] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322823] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322829] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322837] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322845] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0x2a0, write: 0x202a0 [ 67.322851] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling. [ 67.322865] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 67.334901] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 67.610592] PM: suspend of devices complete after 404.163 msecs [ 67.610608] PM: start suspend of devices complete after 439.581 msecs [ 67.624392] PM: late suspend of devices complete after 13.782 msecs [ 67.628954] ACPI: EC: interrupt blocked [ 67.634443] xhci_hcd 0000:00:14.0: wakeup: 1 [ 67.664734] xhci_hcd 0000:00:14.0: --> PCI D3hot [ 67.664827] PM: noirq suspend of devices complete after 40.104 msecs [ 67.664841] ACPI: PM: Preparing to enter system sleep state S3 [ 67.672700] ACPI: EC: event blocked [ 67.672701] ACPI: EC: EC stopped [ 67.672702] ACPI: PM: Saving platform NVS memory [ 67.672822] Disabling non-boot CPUs ... [ 67.674257] smpboot: CPU 1 is now offline [ 67.676216] smpboot: CPU 2 is now offline [ 67.677995] smpboot: CPU 3 is now offline [ 67.679896] smpboot: CPU 4 is now offline [ 67.682056] smpboot: CPU 5 is now offline [ 67.683706] smpboot: CPU 6 is now offline [ 67.685617] smpboot: CPU 7 is now offline [ 67.686102] Checking wakeup interrupts [ 67.686105] Calling kvm_suspend+0x0/0x40 [kvm] [ 67.686174] Calling intel_epb_save+0x0/0x30 [ 67.686179] Calling mce_syscore_suspend+0x0/0x20 [ 67.686181] Calling ledtrig_cpu_syscore_suspend+0x0/0x20 [ 67.686185] Calling timekeeping_suspend+0x0/0x2f0 [ 67.686324] Calling irq_gc_suspend+0x0/0x80 [ 67.686328] Calling save_ioapic_entries+0x0/0xd0 [ 67.687552] Calling i8259A_suspend+0x0/0x30 [ 67.687565] Calling iommu_suspend+0x0/0x120 [ 67.687581] Calling fw_suspend+0x0/0x20 [ 67.687583] Calling acpi_save_bm_rld+0x0/0x30 [ 67.687597] Calling lapic_suspend+0x0/0x160 [ 67.691487] ACPI: PM: Low-level resume complete [ 67.691535] ACPI: EC: EC started [ 67.691536] ACPI: PM: Restoring platform NVS memory [ 67.691594] Calling init_counter_refs+0x0/0x40 [ 67.691601] Calling lapic_resume+0x0/0x220 [ 67.691640] Calling acpi_restore_bm_rld+0x0/0x70 [ 67.691646] Calling irqrouter_resume+0x0/0x50 [ 67.691649] Calling iommu_resume+0x0/0x160 [ 67.691887] Calling i8259A_resume+0x0/0x40 [ 67.692055] Calling ioapic_resume+0x0/0xc0 [ 67.692298] Calling irq_gc_resume+0x0/0x70 [ 67.692302] Calling irq_pm_syscore_resume+0x0/0x20 [ 67.692379] Calling timekeeping_resume+0x0/0x1e0 [ 67.692511] Timekeeping suspended for 15.861 seconds [ 67.692526] Calling ledtrig_cpu_syscore_resume+0x0/0x20 [ 67.692532] Calling mce_syscore_resume+0x0/0x30 [ 67.692552] Calling intel_epb_restore+0x0/0x90 [ 67.692557] Calling microcode_bsp_resume+0x0/0xd0 [ 67.692560] Calling kvm_resume+0x0/0x60 [kvm] [ 67.692652] PM: Triggering wakeup from IRQ 51 [ 67.692689] Enabling non-boot CPUs ... [ 67.692726] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 67.698425] CPU1 is up [ 67.698451] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 67.699543] CPU2 is up [ 67.699565] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 67.700436] CPU3 is up [ 67.700454] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 67.701499] CPU4 is up [ 67.701521] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 67.702429] CPU5 is up [ 67.702448] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 67.703366] CPU6 is up [ 67.703387] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 67.704340] CPU7 is up [ 67.707951] ACPI: PM: Waking up from system sleep state S3 [ 67.755821] ACPI: EC: interrupt unblocked [ 67.756139] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 67.756212] pcieport 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled [ 67.756452] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled [ 67.756571] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled [ 67.775048] PM: noirq resume of devices complete after 19.377 msecs [ 67.775120] DMAR: DRHD: handling fault status reg 2 [ 67.775125] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt request [ 67.775891] PM: early resume of devices complete after 0.695 msecs [ 67.776024] ACPI: EC: event unblocked [ 67.777937] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 67.778312] xhci_hcd 0000:00:14.0: xhci_resume: starting usb1 port polling. [ 67.778337] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 67.778373] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x206e1 [ 67.778381] xhci_hcd 0000:00:14.0: resume root hub [ 67.778383] usb usb1: usb resume [ 67.778386] usb usb2: usb resume [ 67.778386] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 67.778421] hub 1-0:1.0: hub_resume [ 67.778472] hub 2-0:1.0: hub_resume [ 67.778472] xhci_hcd 0000:00:14.0: Get port status 1-1 read: 0x2a0, return 0x100 [ 67.778494] xhci_hcd 0000:00:14.0: Get port status 1-2 read: 0x2a0, return 0x100 [ 67.778507] xhci_hcd 0000:00:14.0: Get port status 1-3 read: 0x2a0, return 0x100 [ 67.778519] xhci_hcd 0000:00:14.0: Get port status 1-4 read: 0x2a0, return 0x100 [ 67.778536] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x206e1, return 0x10101 [ 67.778547] usb usb1-port5: status 0101 change 0001 [ 67.778557] xhci_hcd 0000:00:14.0: clear port5 connect change, portsc: 0x6e1 [ 67.778569] xhci_hcd 0000:00:14.0: Get port status 1-6 read: 0x2a0, return 0x100 [ 67.778579] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 67.778588] usb usb1-port7: status 0107 change 0000 [ 67.778594] xhci_hcd 0000:00:14.0: Get port status 1-8 read: 0x2a0, return 0x100 [ 67.778605] xhci_hcd 0000:00:14.0: Get port status 1-9 read: 0x2a0, return 0x100 [ 67.778616] xhci_hcd 0000:00:14.0: Get port status 1-10 read: 0x2a0, return 0x100 [ 67.778873] xhci_hcd 0000:00:14.0: Get port status 1-11 read: 0x2a0, return 0x100 [ 67.778979] xhci_hcd 0000:00:14.0: Get port status 1-12 read: 0x2a0, return 0x100 [ 67.784922] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 67.785689] nvme nvme0: 8/0/0 default/read/poll queues [ 67.787639] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 67.798801] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 67.802812] xhci_hcd 0000:00:14.0: Get port status 2-1 read: 0x2a0, return 0x2a0 [ 67.802853] xhci_hcd 0000:00:14.0: Get port status 2-2 read: 0x2a0, return 0x2a0 [ 67.802887] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2a0, return 0x2a0 [ 67.802904] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x2a0, return 0x2a0 [ 67.802915] xhci_hcd 0000:00:14.0: Get port status 2-5 read: 0x2a0, return 0x2a0 [ 67.802927] xhci_hcd 0000:00:14.0: Get port status 2-6 read: 0x2a0, return 0x2a0 [ 67.838687] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 67.886750] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x663, return 0x107 [ 67.886772] xhci_hcd 0000:00:14.0: clear USB_PORT_FEAT_SUSPEND [ 67.886774] xhci_hcd 0000:00:14.0: PORTSC 0663 [ 67.886778] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x663, write 0x107e1 [ 67.886789] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x4007e3 [ 67.886795] xhci_hcd 0000:00:14.0: port resume event for port 7 [ 67.886800] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 67.886805] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x6e1, return 0x101 [ 67.906699] usb 1-5: Waited 0ms for CONNECT [ 67.906706] usb 1-5: finish reset-resume [ 67.906719] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0x791 [ 67.938689] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x7e3, write 0x10601 [ 67.938703] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400603 [ 67.938707] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 67.938710] usb 1-7: usb resume [ 67.939062] xhci_hcd 0000:00:14.0: underrun event on endpoint [ 67.939063] xhci_hcd 0000:00:14.0: overrun event on endpoint [ 67.964020] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 67.964023] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 67.974664] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 67.974672] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 67.986658] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x603, return 0x40103 [ 67.986668] xhci_hcd 0000:00:14.0: clear port7 suspend/resume change, portsc: 0x603 [ 68.006679] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 [ 68.010612] usb 1-7: Waited 0ms for CONNECT [ 68.010614] usb 1-7: finish resume [ 68.034651] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 68.034656] xhci_hcd 0000:00:14.0: // Ding dong! [ 68.034806] xhci_hcd 0000:00:14.0: Completed reset device command. [ 68.034847] xhci_hcd 0000:00:14.0: Successful reset device command. [ 68.034874] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 68.034879] xhci_hcd 0000:00:14.0: Slot already in default state [ 68.035255] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 68.035304] xhci_hcd 0000:00:14.0: set port reset, actual port 1-5 status = 0xf91 [ 68.086623] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 68.092607] xhci_hcd 0000:00:14.0: Port change event, 1-5, id 5, portsc: 0x200e03 [ 68.092611] xhci_hcd 0000:00:14.0: handle_port_status: starting usb1 port polling. [ 68.102634] xhci_hcd 0000:00:14.0: Get port status 1-5 read: 0x200e03, return 0x100503 [ 68.102646] xhci_hcd 0000:00:14.0: clear port5 reset change, portsc: 0xe03 [ 68.162619] xhci_hcd 0000:00:14.0: Resetting device with slot ID 1 [ 68.162623] xhci_hcd 0000:00:14.0: // Ding dong! [ 68.162635] xhci_hcd 0000:00:14.0: Completed reset device command. [ 68.162692] xhci_hcd 0000:00:14.0: Can't reset device (slot ID 1) in default state [ 68.162695] xhci_hcd 0000:00:14.0: Not freeing device rings. [ 68.162700] xhci_hcd 0000:00:14.0: // Ding dong! [ 68.162916] xhci_hcd 0000:00:14.0: Successful setup address command [ 68.162921] xhci_hcd 0000:00:14.0: Op regs DCBAA ptr = 0x000000fffff000 [ 68.162923] xhci_hcd 0000:00:14.0: Slot ID 1 dcbaa entry @00000000f471be2e = 0x000000fffd7000 [ 68.162926] xhci_hcd 0000:00:14.0: Output Context DMA address = 0xfffd7000 [ 68.162927] xhci_hcd 0000:00:14.0: Internal device address = 1 [ 68.224668] xhci_hcd 0000:00:14.0: Waiting for status stage event [ 68.224753] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006a5e7ca6 [ 68.224756] xhci_hcd 0000:00:14.0: xhci_drop_endpoint called for udev 000000006a5e7ca6 [ 68.224760] xhci_hcd 0000:00:14.0: add ep 0x83, slot id 1, new drop flags = 0x0, new add flags = 0x80 [ 68.224763] xhci_hcd 0000:00:14.0: add ep 0x85, slot id 1, new drop flags = 0x0, new add flags = 0x880 [ 68.224765] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 68.224766] xhci_hcd 0000:00:14.0: // Ding dong! [ 68.224962] xhci_hcd 0000:00:14.0: Successful Endpoint Configure command [ 68.226107] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 68.226333] xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 000000006a5e7ca6 [ 68.226693] PM: resume of devices complete after 450.950 msecs [ 68.229649] OOM killer enabled. [ 68.229650] Restarting tasks ... [ 68.229678] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 68.231164] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-1 status = 0xe0002a0 [ 68.231217] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-2 status = 0xe0002a0 [ 68.231232] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-3 status = 0xe0002a0 [ 68.231248] hub 1-0:1.0: state 7 ports 12 chg 0000 evt 0080 [ 68.231254] xhci_hcd 0000:00:14.0: Get port status 1-7 read: 0x603, return 0x103 [ 68.231264] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-4 status = 0xe0002a0 [ 68.231279] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-5 status = 0xe0002a0 [ 68.231288] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2-6 status = 0xe0002a0 [ 68.231294] hub 2-0:1.0: hub_suspend [ 68.231302] usb usb2: bus auto-suspend, wakeup 1 [ 68.231319] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling [ 68.231812] done. [ 68.231842] random: crng reseeded on system resumption [ 68.297302] PM: suspend exit [ 68.334510] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 68.616366] wlp2s0: VHT information is missing, disabling VHT [ 68.661375] wlp2s0: authenticate with 6c:f3:7f:10:ae:1a (local address=9c:b6:d0:89:88:7d) [ 68.661381] wlp2s0: send auth to 6c:f3:7f:10:ae:1a (try 1/3) [ 68.668554] wlp2s0: authenticated [ 68.670422] wlp2s0: associate with 6c:f3:7f:10:ae:1a (try 1/3) [ 68.677799] wlp2s0: RX AssocResp from 6c:f3:7f:10:ae:1a (capab=0x401 status=0 aid=1) [ 68.680271] wlp2s0: associated [ 68.977417] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 70.169109] xhci_hcd 0000:00:14.0: // Ding dong! [ 70.169142] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 6 [ 70.169147] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 5 [ 70.169149] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 4 [ 70.169161] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 3 [ 70.169163] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 2 [ 70.169202] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 2 ep 0 [ 70.169229] xhci_hcd 0000:00:14.0: Set port 1-7 link state, portsc: 0x603, write 0x10661 [ 70.189979] usb 1-7: usb auto-suspend, wakeup 0 [ 70.725881] xhci_hcd 0000:00:14.0: // Ding dong! [ 70.725902] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 10 [ 70.725910] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 6 [ 70.725913] xhci_hcd 0000:00:14.0: Stopped on No-op or Link TRB for slot 1 ep 0 [ 70.725999] xhci_hcd 0000:00:14.0: Set port 1-5 link state, portsc: 0xe03, write 0x10e61 [ 70.745880] usb 1-5: usb auto-suspend, wakeup 0 [ 70.765868] hub 1-0:1.0: hub_suspend [ 70.765881] usb usb1: bus auto-suspend, wakeup 1 [ 70.765921] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb1 port polling [ 70.765930] xhci_hcd 0000:00:14.0: config port 2-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765937] xhci_hcd 0000:00:14.0: config port 2-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765943] xhci_hcd 0000:00:14.0: config port 2-3 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765949] xhci_hcd 0000:00:14.0: config port 2-4 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765955] xhci_hcd 0000:00:14.0: config port 2-5 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765960] xhci_hcd 0000:00:14.0: config port 2-6 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765966] xhci_hcd 0000:00:14.0: config port 1-1 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765969] xhci_hcd 0000:00:14.0: config port 1-2 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765972] xhci_hcd 0000:00:14.0: config port 1-3 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765975] xhci_hcd 0000:00:14.0: config port 1-4 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765980] xhci_hcd 0000:00:14.0: config port 1-6 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765983] xhci_hcd 0000:00:14.0: config port 1-8 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765986] xhci_hcd 0000:00:14.0: config port 1-9 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765989] xhci_hcd 0000:00:14.0: config port 1-10 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765995] xhci_hcd 0000:00:14.0: config port 1-11 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.765998] xhci_hcd 0000:00:14.0: config port 1-12 wake bits, portsc: 0xa0002a0, write: 0xa0202a0 [ 70.766000] xhci_hcd 0000:00:14.0: xhci_suspend: stopping usb1 port polling. [ 70.766008] xhci_hcd 0000:00:14.0: // Setting command ring address to 0xffffe001 [ 70.766119] xhci_hcd 0000:00:14.0: hcd_pci_runtime_suspend: 0
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4b93c0bd1d4b..487d5fe60f0c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3110,7 +3110,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, usleep_range(10000, 12000); else { /* TRSTRCY = 10 ms; plus some extra */ - reset_recovery_time = 10 + 40; + reset_recovery_time = 10; /* Hub needs extra delay after resetting its port. */ if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET)
This basically reverts commit b789696af8b4102b7cc26dec30c2c51ce51ee18b ("[PATCH] USB: relax usbcore reset timings") from 2005. This adds unneeded 40 ms during resume from suspend on a majority of devices, where it’s not needed, like the Dell XPS 13 9360/0596KF, BIOS 2.21.0 06/02/2022 with $ usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=12 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=06.09 S: Manufacturer=Linux 6.9.0-rc6-00047-g25a99e110f17 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms T: Bus=01 Lev=01 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04f3 ProdID=2234 Rev=11.11 S: Manufacturer=ELAN S: Product=Touchscreen C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=2ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms T: Bus=01 Lev=01 Prnt=03 Port=04 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0c45 ProdID=670c Rev=56.26 S: Manufacturer=CN09GTFMLOG008C8B7FWA01 S: Product=Integrated_Webcam_HD C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms I: If#= 1 Alt= 0 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 6 D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev=06.09 S: Manufacturer=Linux 6.9.0-rc6-00047-g25a99e110f17 xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=0000:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms The commit messages unfortunately does not list the devices needing this. Should they surface again, these should be added to the quirk list for USB_QUIRK_HUB_SLOW_RESET. Fixes: b789696af8b4 ("[PATCH] USB: relax usbcore reset timings") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)