| Message ID | 20240801091217.1408809-1-chanh@os.amperecomputing.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Update the device tree for Ampere's BMC platform | expand |
On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote: > Updates the device tree to support some features on Ampere's > Mt.Mitchell BMC and Ampere's Mt.Jade BMC. > > Chanh Nguyen (6): > ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors > ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports > ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports > ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15 > ARM: dts: aspeed: mtmitchell: Add LEDs > ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers > > .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 16 ++ > .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 152 ++++++++++++++++++ > 2 files changed, 168 insertions(+) > > -- > 2.43.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh@os.amperecomputing.com: arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller0@20: failed to match any schema with compatible: ['maxim,max31790'] arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller1@2f: failed to match any schema with compatible: ['maxim,max31790']
On 01/08/2024 22:29, Rob Herring (Arm) wrote: > > On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote: >> Updates the device tree to support some features on Ampere's >> Mt.Mitchell BMC and Ampere's Mt.Jade BMC. >> >> Chanh Nguyen (6): >> ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors >> ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports >> ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports >> ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15 >> ARM: dts: aspeed: mtmitchell: Add LEDs >> ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers >> >> .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 16 ++ >> .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 152 ++++++++++++++++++ >> 2 files changed, 168 insertions(+) >> >> -- >> 2.43.0 >> >> >> > > > My bot found new DTB warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. No need to reply > unless the platform maintainer has comments. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh@os.amperecomputing.com: > > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller0@20: failed to match any schema with compatible: ['maxim,max31790'] > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller1@2f: failed to match any schema with compatible: ['maxim,max31790'] > > Thank Rob for your review! I am aware of the new warnings you mentioned. For more information, the schema binding of "maxim,max31790" is being progressed by other series https://lore.kernel.org/lkml/20240414042246.8681-2-chanh@os.amperecomputing.com/ Best regards, Chanh > > >
On Sat, 2024-08-03 at 10:49 +0700, Chanh Nguyen wrote: > > On 01/08/2024 22:29, Rob Herring (Arm) wrote: > > > > On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote: > > > Updates the device tree to support some features on Ampere's > > > Mt.Mitchell BMC and Ampere's Mt.Jade BMC. > > > > > > Chanh Nguyen (6): > > > ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors > > > ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports > > > ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports > > > ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15 > > > ARM: dts: aspeed: mtmitchell: Add LEDs > > > ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers > > > > > > .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 16 ++ > > > .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 152 ++++++++++++++++++ > > > 2 files changed, 168 insertions(+) > > > > > > -- > > > 2.43.0 > > > > > > > > > > > > > > > My bot found new DTB warnings on the .dts files added or changed in this > > series. > > > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > > are fixed by another series. Ultimately, it is up to the platform > > maintainer whether these warnings are acceptable or not. No need to reply > > unless the platform maintainer has comments. > > > > If you already ran DT checks and didn't see these error(s), then > > make sure dt-schema is up to date: > > > > pip3 install dtschema --upgrade > > > > > > New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh@os.amperecomputing.com: > > > > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller0@20: failed to match any schema with compatible: ['maxim,max31790'] > > arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller1@2f: failed to match any schema with compatible: ['maxim,max31790'] > > > > > > Thank Rob for your review! > > I am aware of the new warnings you mentioned. For more information, the > schema binding of "maxim,max31790" is being progressed by other series > https://lore.kernel.org/lkml/20240414042246.8681-2-chanh@os.amperecomputing.com/ > For now can you please remove the `maxim,max31790` nodes from your devicetree and re-send? As it stands you've been asked to rework what you proposed in the thread that you linked, and a quick look at the hwmon trees suggests support for the max31790 hasn't been merged. You can send a follow-up patch adding the nodes to your devicetree once the binding has been merged. Andrew
On 05/08/2024 10:59, Andrew Jeffery wrote: > [EXTERNAL EMAIL NOTICE: This email originated from an external sender. Please be mindful of safe email handling and proprietary information protection practices.] > > > On Sat, 2024-08-03 at 10:49 +0700, Chanh Nguyen wrote: >> >> On 01/08/2024 22:29, Rob Herring (Arm) wrote: >>> >>> On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote: >>>> Updates the device tree to support some features on Ampere's >>>> Mt.Mitchell BMC and Ampere's Mt.Jade BMC. >>>> >>>> Chanh Nguyen (6): >>>> ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors >>>> ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports >>>> ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports >>>> ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15 >>>> ARM: dts: aspeed: mtmitchell: Add LEDs >>>> ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers >>>> >>>> .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 16 ++ >>>> .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 152 ++++++++++++++++++ >>>> 2 files changed, 168 insertions(+) >>>> >>>> -- >>>> 2.43.0 >>>> >>>> >>>> >>> >>> >>> My bot found new DTB warnings on the .dts files added or changed in this >>> series. >>> >>> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings >>> are fixed by another series. Ultimately, it is up to the platform >>> maintainer whether these warnings are acceptable or not. No need to reply >>> unless the platform maintainer has comments. >>> >>> If you already ran DT checks and didn't see these error(s), then >>> make sure dt-schema is up to date: >>> >>> pip3 install dtschema --upgrade >>> >>> >>> New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh@os.amperecomputing.com: >>> >>> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller0@20: failed to match any schema with compatible: ['maxim,max31790'] >>> arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus@1e78a000/i2c@480/fan-controller1@2f: failed to match any schema with compatible: ['maxim,max31790'] >>> >>> >> >> Thank Rob for your review! >> >> I am aware of the new warnings you mentioned. For more information, the >> schema binding of "maxim,max31790" is being progressed by other series >> https://lore.kernel.org/lkml/20240414042246.8681-2-chanh@os.amperecomputing.com/ >> > > For now can you please remove the `maxim,max31790` nodes from your > devicetree and re-send? As it stands you've been asked to rework what > you proposed in the thread that you linked, and a quick look at the > hwmon trees suggests support for the max31790 hasn't been merged. > > You can send a follow-up patch adding the nodes to your devicetree once > the binding has been merged. > > Andrew Thank Andrew for your comment! I'll remove the `maxim,max31790` nodes and send the patch v2 Chanh