| Message ID | 20240815225731.40276-5-james.quinlan@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: brcnstb: Enable STB 7712 SOC | expand |
On Thu, Aug 15, 2024 at 06:57:17PM -0400, Jim Quinlan wrote: > Refactor the error handling in the bottom half of the probe > function for readability. The invocation of clk_prepare_enable() > is moved lower in the function and this simplifies a couple > of return paths. dev_err_probe() is also used when it is apt. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > drivers/pci/controller/pcie-brcmstb.c | 25 ++++++++++++------------- > 1 file changed, 12 insertions(+), 13 deletions(-) > > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c > index c08683febdd4..790a149f6581 100644 > --- a/drivers/pci/controller/pcie-brcmstb.c > +++ b/drivers/pci/controller/pcie-brcmstb.c > @@ -1613,25 +1613,23 @@ static int brcm_pcie_probe(struct platform_device *pdev) > > pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); > > - ret = clk_prepare_enable(pcie->clk); > - if (ret) { > - dev_err(&pdev->dev, "could not enable clock\n"); > - return ret; > - } > pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal"); > - if (IS_ERR(pcie->rescal)) { > - clk_disable_unprepare(pcie->clk); > + if (IS_ERR(pcie->rescal)) > return PTR_ERR(pcie->rescal); > - } > + > pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst"); > - if (IS_ERR(pcie->perst_reset)) { > - clk_disable_unprepare(pcie->clk); > + if (IS_ERR(pcie->perst_reset)) > return PTR_ERR(pcie->perst_reset); > - } > > - ret = reset_control_reset(pcie->rescal); > + ret = clk_prepare_enable(pcie->clk); > if (ret) > - dev_err(&pdev->dev, "failed to deassert 'rescal'\n"); > + return dev_err_probe(&pdev->dev, ret, "could not enable clock\n"); > + > + ret = reset_control_reset(pcie->rescal); > + if (ret) { > + clk_disable_unprepare(pcie->clk); > + return dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"); > + } > > ret = brcm_phy_start(pcie); > if (ret) { > @@ -1678,6 +1676,7 @@ static int brcm_pcie_probe(struct platform_device *pdev) > > fail: > __brcm_pcie_remove(pcie); > + Irrelevant change in this patch. - Mani > return ret; > } > > -- > 2.17.1 >
On 8/15/24 15:57, Jim Quinlan wrote: > Refactor the error handling in the bottom half of the probe > function for readability. The invocation of clk_prepare_enable() > is moved lower in the function and this simplifies a couple > of return paths. dev_err_probe() is also used when it is apt. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index c08683febdd4..790a149f6581 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -1613,25 +1613,23 @@ static int brcm_pcie_probe(struct platform_device *pdev) pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); - ret = clk_prepare_enable(pcie->clk); - if (ret) { - dev_err(&pdev->dev, "could not enable clock\n"); - return ret; - } pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal"); - if (IS_ERR(pcie->rescal)) { - clk_disable_unprepare(pcie->clk); + if (IS_ERR(pcie->rescal)) return PTR_ERR(pcie->rescal); - } + pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst"); - if (IS_ERR(pcie->perst_reset)) { - clk_disable_unprepare(pcie->clk); + if (IS_ERR(pcie->perst_reset)) return PTR_ERR(pcie->perst_reset); - } - ret = reset_control_reset(pcie->rescal); + ret = clk_prepare_enable(pcie->clk); if (ret) - dev_err(&pdev->dev, "failed to deassert 'rescal'\n"); + return dev_err_probe(&pdev->dev, ret, "could not enable clock\n"); + + ret = reset_control_reset(pcie->rescal); + if (ret) { + clk_disable_unprepare(pcie->clk); + return dev_err_probe(&pdev->dev, ret, "failed to deassert 'rescal'\n"); + } ret = brcm_phy_start(pcie); if (ret) { @@ -1678,6 +1676,7 @@ static int brcm_pcie_probe(struct platform_device *pdev) fail: __brcm_pcie_remove(pcie); + return ret; }
Refactor the error handling in the bottom half of the probe function for readability. The invocation of clk_prepare_enable() is moved lower in the function and this simplifies a couple of return paths. dev_err_probe() is also used when it is apt. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> --- drivers/pci/controller/pcie-brcmstb.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-)