| Message ID | 20240724092950.752536-7-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Freescale i.MX8qxp Display Controller support | expand |
On Wed, Jul 24, 2024 at 05:29:37PM +0800, Liu Ying wrote: > i.MX8qxp Display Controller contains a command sequencer is designed to > autonomously process command lists. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v3: > * New patch. (Rob) > > .../imx/fsl,imx8qxp-dc-command-sequencer.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml > new file mode 100644 > index 000000000000..2e0e8e40a185 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qxp Display Controller Command Sequencer > + > +description: | > + The Command Sequencer is designed to autonomously process command lists. > + By that it can load setups into the DC configuration and synchronize to > + hardware events. This releases a system's CPU from workload, because it > + does not need to wait for certain events. Also it simplifies SW architecture, > + because no interrupt handlers are required. Setups are read via AXI bus, > + while write access to configuration registers occurs directly via an internal > + bus. This saves bandwidth for the AXI interconnect and improves the system > + architecture in terms of safety aspects. > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +properties: > + compatible: > + const: fsl,imx8qxp-dc-command-sequencer > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + interrupts: > + maxItems: 5 > + > + interrupt-names: > + items: > + - const: error > + - const: sw0 > + - const: sw1 > + - const: sw2 > + - const: sw3 > + > + fsl,iram: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: phandle pointing to the mmio-sram device node 'sram' is the standard property for this. > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + - interrupt-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8-lpcg.h> > + > + command-sequencer@56180400 { > + compatible = "fsl,imx8qxp-dc-command-sequencer"; > + reg = <0x56180400 0x1a4>; > + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; > + interrupt-parent = <&dc0_intc>; > + interrupts = <36>, <37>, <38>, <39>, <40>; > + interrupt-names = "error", "sw0", "sw1", "sw2", "sw3"; > + }; > -- > 2.34.1 >
On 08/17/2024, Rob Herring wrote: > On Wed, Jul 24, 2024 at 05:29:37PM +0800, Liu Ying wrote: >> i.MX8qxp Display Controller contains a command sequencer is designed to >> autonomously process command lists. >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> >> --- >> v3: >> * New patch. (Rob) >> >> .../imx/fsl,imx8qxp-dc-command-sequencer.yaml | 67 +++++++++++++++++++ >> 1 file changed, 67 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml >> >> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml >> new file mode 100644 >> index 000000000000..2e0e8e40a185 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml >> @@ -0,0 +1,67 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Freescale i.MX8qxp Display Controller Command Sequencer >> + >> +description: | >> + The Command Sequencer is designed to autonomously process command lists. >> + By that it can load setups into the DC configuration and synchronize to >> + hardware events. This releases a system's CPU from workload, because it >> + does not need to wait for certain events. Also it simplifies SW architecture, >> + because no interrupt handlers are required. Setups are read via AXI bus, >> + while write access to configuration registers occurs directly via an internal >> + bus. This saves bandwidth for the AXI interconnect and improves the system >> + architecture in terms of safety aspects. >> + >> +maintainers: >> + - Liu Ying <victor.liu@nxp.com> >> + >> +properties: >> + compatible: >> + const: fsl,imx8qxp-dc-command-sequencer >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + interrupts: >> + maxItems: 5 >> + >> + interrupt-names: >> + items: >> + - const: error >> + - const: sw0 >> + - const: sw1 >> + - const: sw2 >> + - const: sw3 >> + >> + fsl,iram: >> + $ref: /schemas/types.yaml#/definitions/phandle >> + description: phandle pointing to the mmio-sram device node > > 'sram' is the standard property for this. Will use 'sram' in next version. Thanks. > >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - interrupts >> + - interrupt-names >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/clock/imx8-lpcg.h> >> + >> + command-sequencer@56180400 { >> + compatible = "fsl,imx8qxp-dc-command-sequencer"; >> + reg = <0x56180400 0x1a4>; >> + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; >> + interrupt-parent = <&dc0_intc>; >> + interrupts = <36>, <37>, <38>, <39>, <40>; >> + interrupt-names = "error", "sw0", "sw1", "sw2", "sw3"; >> + }; >> -- >> 2.34.1 >> >
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml new file mode 100644 index 000000000000..2e0e8e40a185 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Command Sequencer + +description: | + The Command Sequencer is designed to autonomously process command lists. + By that it can load setups into the DC configuration and synchronize to + hardware events. This releases a system's CPU from workload, because it + does not need to wait for certain events. Also it simplifies SW architecture, + because no interrupt handlers are required. Setups are read via AXI bus, + while write access to configuration registers occurs directly via an internal + bus. This saves bandwidth for the AXI interconnect and improves the system + architecture in terms of safety aspects. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-command-sequencer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: error + - const: sw0 + - const: sw1 + - const: sw2 + - const: sw3 + + fsl,iram: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle pointing to the mmio-sram device node + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + command-sequencer@56180400 { + compatible = "fsl,imx8qxp-dc-command-sequencer"; + reg = <0x56180400 0x1a4>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-parent = <&dc0_intc>; + interrupts = <36>, <37>, <38>, <39>, <40>; + interrupt-names = "error", "sw0", "sw1", "sw2", "sw3"; + };
i.MX8qxp Display Controller contains a command sequencer is designed to autonomously process command lists. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v3: * New patch. (Rob) .../imx/fsl,imx8qxp-dc-command-sequencer.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml