diff mbox series

[v2] ARM: dts: Fix undocumented LM75 compatible nodes

Message ID 20240816164717.1585629-1-robh@kernel.org (mailing list archive)
State New
Headers show
Series [v2] ARM: dts: Fix undocumented LM75 compatible nodes | expand

Commit Message

Rob Herring Aug. 16, 2024, 4:47 p.m. UTC
"lm75" without any vendor is undocumented. It works with the Linux
kernel since the I2C subsystem will do matches of the compatible string
without a vendor prefix to the i2c_device_id and/or driver name.

Mostly replace "lm75" with "national,lm75" as that's the original part
vendor and the compatible which matches what "lm75" matched with. In a
couple of cases the node name or compatible gives a clue to the actual
part and vendor and a more specific compatible can be used. In these
cases, it does change the variant the kernel picks.

"nct75" is an OnSemi part which is compatible with TI TMP75C based on
a comparison of the OnSemi NCT75 datasheet and configuration the Linux
driver uses. Adding an OnSemi compatible would be an ABI change.

"nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
11-bit resolution and 100ms sample time. The "national,lm75a" is
9-bit, so "national,lm75b" is the closest match for both NXP variants.

While we're here, fix the node names to use the generic name
"temperature-sensor".

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
SoC maintainers, Please take this directly for v6.12.

v2:
 - Also use "national,lm75b" on i.MX53 boards.
---
 .../aspeed/aspeed-bmc-facebook-greatlakes.dts |  2 +-
 .../socfpga/socfpga_cyclone5_vining_fpga.dts  |  4 +--
 .../dts/marvell/armada-385-clearfog-gtr.dtsi  |  8 ++---
 .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 32 +++++++++----------
 .../boot/dts/nuvoton/nuvoton-npcm750-evb.dts  |  6 ++--
 arch/arm/boot/dts/nxp/imx/imx53-mba53.dts     |  4 +--
 arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi   |  4 +--
 .../dts/nxp/lpc/lpc4357-ea4357-devkit.dts     |  4 +--
 .../boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts  |  2 +-
 arch/arm/boot/dts/ti/omap/am335x-nano.dts     |  2 +-
 .../boot/dts/xilinx/zynq-zturn-common.dtsi    |  4 +--
 11 files changed, 36 insertions(+), 36 deletions(-)

Comments

Alexander Stein Aug. 19, 2024, 9:43 a.m. UTC | #1
Hi Rob,

thanks for the update.

Am Freitag, 16. August 2024, 18:47:14 CEST schrieb Rob Herring (Arm):
> "lm75" without any vendor is undocumented. It works with the Linux
> kernel since the I2C subsystem will do matches of the compatible string
> without a vendor prefix to the i2c_device_id and/or driver name.
> 
> Mostly replace "lm75" with "national,lm75" as that's the original part
> vendor and the compatible which matches what "lm75" matched with. In a
> couple of cases the node name or compatible gives a clue to the actual
> part and vendor and a more specific compatible can be used. In these
> cases, it does change the variant the kernel picks.
> 
> "nct75" is an OnSemi part which is compatible with TI TMP75C based on
> a comparison of the OnSemi NCT75 datasheet and configuration the Linux
> driver uses. Adding an OnSemi compatible would be an ABI change.
> 
> "nxp,lm75" is most likely an NXP part. Alexander Stein says the i.MX53
> boards are a NXP LM75A as well. NXP makes a LM75A and LM75B. Both are
> 11-bit resolution and 100ms sample time. The "national,lm75a" is
> 9-bit, so "national,lm75b" is the closest match for both NXP variants.
> 
> While we're here, fix the node names to use the generic name
> "temperature-sensor".
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Kevin Hilman <khilman@baylibre.com> # am335x-nano.dts
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx53-mba53.dts, imx53-tqma53.dtsi

> ---
> SoC maintainers, Please take this directly for v6.12.
> 
> v2:
>  - Also use "national,lm75b" on i.MX53 boards.
> ---
>  .../aspeed/aspeed-bmc-facebook-greatlakes.dts |  2 +-
>  .../socfpga/socfpga_cyclone5_vining_fpga.dts  |  4 +--
>  .../dts/marvell/armada-385-clearfog-gtr.dtsi  |  8 ++---
>  .../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 32 +++++++++----------
>  .../boot/dts/nuvoton/nuvoton-npcm750-evb.dts  |  6 ++--
>  arch/arm/boot/dts/nxp/imx/imx53-mba53.dts     |  4 +--
>  arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi   |  4 +--
>  .../dts/nxp/lpc/lpc4357-ea4357-devkit.dts     |  4 +--
>  .../boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts  |  2 +-
>  arch/arm/boot/dts/ti/omap/am335x-nano.dts     |  2 +-
>  .../boot/dts/xilinx/zynq-zturn-common.dtsi    |  4 +--
>  11 files changed, 36 insertions(+), 36 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
> index 998598c15fd0..49914a4a179f 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
> @@ -201,7 +201,7 @@ eeprom@54 {
>  &i2c12 {
>  	status = "okay";
>  	temperature-sensor@4f {
> -		compatible = "lm75";
> +		compatible = "national,lm75";
>  		reg = <0x4f>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
> index 65f390bf8975..84f39dec3c42 100644
> --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
> +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
> @@ -130,8 +130,8 @@ gpio: pca9557@1f {
>  		#gpio-cells = <2>;
>  	};
>  
> -	temp: lm75@48 {
> -		compatible = "lm75";
> +	temp: temperature-sensor@48 {
> +		compatible = "national,lm75";
>  		reg = <0x48>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
> index f3a3cb6ac311..8208c6a9627a 100644
> --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
> @@ -423,14 +423,14 @@ &i2c0 {
>  	status = "okay";
>  
>  	/* U26 temperature sensor placed near SoC */
> -	temp1: nct75@4c {
> -		compatible = "lm75";
> +	temp1: temperature-sensor@4c {
> +		compatible = "ti,tmp75c";
>  		reg = <0x4c>;
>  	};
>  
>  	/* U27 temperature sensor placed near RTC battery */
> -	temp2: nct75@4d {
> -		compatible = "lm75";
> +	temp2: temperature-sensor@4d {
> +		compatible = "ti,tmp75c";
>  		reg = <0x4d>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
> index 1f07ba382910..886a87dfcd0d 100644
> --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
> +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
> @@ -531,8 +531,8 @@ i2c@4 {
>  			reg = <4>;
>  
>  			// INLET1_T
> -			lm75@5c {
> -				compatible = "ti,lm75";
> +			temperature-sensor@5c {
> +				compatible = "national,lm75";
>  				reg = <0x5c>;
>  			};
>  		};
> @@ -543,8 +543,8 @@ i2c@5 {
>  			reg = <5>;
>  
>  			// OUTLET1_T
> -			lm75@5c {
> -				compatible = "ti,lm75";
> +			temperature-sensor@5c {
> +				compatible = "national,lm75";
>  				reg = <0x5c>;
>  			};
>  		};
> @@ -555,8 +555,8 @@ i2c@6 {
>  			reg = <6>;
>  
>  			// OUTLET2_T
> -			lm75@5c {
> -				compatible = "ti,lm75";
> +			temperature-sensor@5c {
> +				compatible = "national,lm75";
>  				reg = <0x5c>;
>  			};
>  		};
> @@ -567,8 +567,8 @@ i2c@7 {
>  			reg = <7>;
>  
>  			// OUTLET3_T
> -			lm75@5c {
> -				compatible = "ti,lm75";
> +			temperature-sensor@5c {
> +				compatible = "national,lm75";
>  				reg = <0x5c>;
>  			};
>  		};
> @@ -697,8 +697,8 @@ i2c@3 {
>  			reg = <3>;
>  
>  			// M2_ZONE_T
> -			lm75@28 {
> -				compatible = "ti,lm75";
> +			temperature-sensor@28 {
> +				compatible = "national,lm75";
>  				reg = <0x28>;
>  			};
>  		};
> @@ -709,8 +709,8 @@ i2c@4 {
>  			reg = <4>;
>  
>  			// BATT_ZONE_T
> -			lm75@29 {
> -				compatible = "ti,lm75";
> +			temperature-sensor@29 {
> +				compatible = "national,lm75";
>  				reg = <0x29>;
>  			};
>  		};
> @@ -721,8 +721,8 @@ i2c@5 {
>  			reg = <5>;
>  
>  			// NBM1_ZONE_T
> -			lm75@28 {
> -				compatible = "ti,lm75";
> +			temperature-sensor@28 {
> +				compatible = "national,lm75";
>  				reg = <0x28>;
>  			};
>  		};
> @@ -732,8 +732,8 @@ i2c@6 {
>  			reg = <6>;
>  
>  			// NBM2_ZONE_T
> -			lm75@29 {
> -				compatible = "ti,lm75";
> +			temperature-sensor@29 {
> +				compatible = "national,lm75";
>  				reg = <0x29>;
>  			};
>  		};
> diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
> index f53d45fa1de8..bcdcb30c7bf6 100644
> --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
> +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
> @@ -198,7 +198,7 @@ &i2c0 {
>  	clock-frequency = <100000>;
>  	status = "okay";
>  	lm75@48 {
> -		compatible = "lm75";
> +		compatible = "national,lm75";
>  		reg = <0x48>;
>  		status = "okay";
>  	};
> @@ -208,8 +208,8 @@ lm75@48 {
>  &i2c1 {
>  	clock-frequency = <100000>;
>  	status = "okay";
> -	lm75@48 {
> -		compatible = "lm75";
> +	temperature-sensor@48 {
> +		compatible = "national,lm75";
>  		reg = <0x48>;
>  		status = "okay";
>  	};
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> index 2117de872703..0d336cbdb451 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
> @@ -175,8 +175,8 @@ expander: pca9554@20 {
>  		gpio-controller;
>  	};
>  
> -	sensor2: lm75@49 {
> -		compatible = "lm75";
> +	sensor2: temperature-sensor@49 {
> +		compatible = "national,lm75b";
>  		reg = <0x49>;
>  	};
>  };
> diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> index b2d7271d1d24..c34ee84bd716 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
> @@ -254,8 +254,8 @@ pmic: mc34708@8 {
>  		interrupts = <6 4>; /* PATA_DATA6, active high */
>  	};
>  
> -	sensor1: lm75@48 {
> -		compatible = "lm75";
> +	sensor1: temperature-sensor@48 {
> +		compatible = "national,lm75b";
>  		reg = <0x48>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
> index 224f80a4a31d..4aefbc01dfc0 100644
> --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
> +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
> @@ -482,8 +482,8 @@ mma7455@1d {
>  		reg = <0x1d>;
>  	};
>  
> -	lm75@48 {
> -		compatible = "nxp,lm75";
> +	temperature-sensor@48 {
> +		compatible = "national,lm75b";
>  		reg = <0x48>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
> index 1f84654df50c..846afb8ccbf1 100644
> --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
> +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
> @@ -511,7 +511,7 @@ &i2c1 {
>  	clock-frequency = <400000>;
>  
>  	sensor@49 {
> -		compatible = "lm75";
> +		compatible = "national,lm75";
>  		reg = <0x49>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
> index 26b5510cb3d1..56929059f5af 100644
> --- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts
> +++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
> @@ -231,7 +231,7 @@ tps: tps@24 {
>  	};
>  
>  	temperature-sensor@48 {
> -		compatible = "lm75";
> +		compatible = "national,lm75";
>  		reg = <0x48>;
>  	};
>  
> diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> index dfb1fbafe3aa..33b02e05ce82 100644
> --- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> +++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
> @@ -97,9 +97,9 @@ &i2c0 {
>  	status = "okay";
>  	clock-frequency = <400000>;
>  
> -	stlm75@49 {
> +	temperature-sensor@49 {
>  		status = "okay";
> -		compatible = "lm75";
> +		compatible = "st,stlm75";
>  		reg = <0x49>;
>  	};
>  
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
index 998598c15fd0..49914a4a179f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -201,7 +201,7 @@  eeprom@54 {
 &i2c12 {
 	status = "okay";
 	temperature-sensor@4f {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
 };
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index 65f390bf8975..84f39dec3c42 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -130,8 +130,8 @@  gpio: pca9557@1f {
 		#gpio-cells = <2>;
 	};
 
-	temp: lm75@48 {
-		compatible = "lm75";
+	temp: temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index f3a3cb6ac311..8208c6a9627a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -423,14 +423,14 @@  &i2c0 {
 	status = "okay";
 
 	/* U26 temperature sensor placed near SoC */
-	temp1: nct75@4c {
-		compatible = "lm75";
+	temp1: temperature-sensor@4c {
+		compatible = "ti,tmp75c";
 		reg = <0x4c>;
 	};
 
 	/* U27 temperature sensor placed near RTC battery */
-	temp2: nct75@4d {
-		compatible = "lm75";
+	temp2: temperature-sensor@4d {
+		compatible = "ti,tmp75c";
 		reg = <0x4d>;
 	};
 
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index 1f07ba382910..886a87dfcd0d 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -531,8 +531,8 @@  i2c@4 {
 			reg = <4>;
 
 			// INLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -543,8 +543,8 @@  i2c@5 {
 			reg = <5>;
 
 			// OUTLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -555,8 +555,8 @@  i2c@6 {
 			reg = <6>;
 
 			// OUTLET2_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -567,8 +567,8 @@  i2c@7 {
 			reg = <7>;
 
 			// OUTLET3_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
@@ -697,8 +697,8 @@  i2c@3 {
 			reg = <3>;
 
 			// M2_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
@@ -709,8 +709,8 @@  i2c@4 {
 			reg = <4>;
 
 			// BATT_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
@@ -721,8 +721,8 @@  i2c@5 {
 			reg = <5>;
 
 			// NBM1_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
@@ -732,8 +732,8 @@  i2c@6 {
 			reg = <6>;
 
 			// NBM2_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
index f53d45fa1de8..bcdcb30c7bf6 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
@@ -198,7 +198,7 @@  &i2c0 {
 	clock-frequency = <100000>;
 	status = "okay";
 	lm75@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
@@ -208,8 +208,8 @@  lm75@48 {
 &i2c1 {
 	clock-frequency = <100000>;
 	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
index 2117de872703..0d336cbdb451 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -175,8 +175,8 @@  expander: pca9554@20 {
 		gpio-controller;
 	};
 
-	sensor2: lm75@49 {
-		compatible = "lm75";
+	sensor2: temperature-sensor@49 {
+		compatible = "national,lm75b";
 		reg = <0x49>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
index b2d7271d1d24..c34ee84bd716 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
@@ -254,8 +254,8 @@  pmic: mc34708@8 {
 		interrupts = <6 4>; /* PATA_DATA6, active high */
 	};
 
-	sensor1: lm75@48 {
-		compatible = "lm75";
+	sensor1: temperature-sensor@48 {
+		compatible = "national,lm75b";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 224f80a4a31d..4aefbc01dfc0 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -482,8 +482,8 @@  mma7455@1d {
 		reg = <0x1d>;
 	};
 
-	lm75@48 {
-		compatible = "nxp,lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 1f84654df50c..846afb8ccbf1 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -511,7 +511,7 @@  &i2c1 {
 	clock-frequency = <400000>;
 
 	sensor@49 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x49>;
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
index 26b5510cb3d1..56929059f5af 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
@@ -231,7 +231,7 @@  tps: tps@24 {
 	};
 
 	temperature-sensor@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
diff --git a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
index dfb1fbafe3aa..33b02e05ce82 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/xilinx/zynq-zturn-common.dtsi
@@ -97,9 +97,9 @@  &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	stlm75@49 {
+	temperature-sensor@49 {
 		status = "okay";
-		compatible = "lm75";
+		compatible = "st,stlm75";
 		reg = <0x49>;
 	};