| Message ID | 20240816-dcd-type2-upstream-v3-20-7c9b96cba6d7@intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Ira Weiny |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On 8/16/24 7:44 AM, Ira Weiny wrote: > Dynamic Capacity regions must limit dev dax resources to those areas > which have extents backing real memory. Such DAX regions are dubbed > 'sparse' regions. In order to manage where memory is available four > alternatives were considered: > > 1) Create a single region resource child on region creation which > reserves the entire region. Then as extents are added punch holes in > this reservation. This requires new resource manipulation to punch > the holes and still requires an additional iteration over the extent > areas which may already have existing dev dax resources used. > > 2) Maintain an ordered xarray of extents which can be queried while > processing the resize logic. The issue is that existing region->res > children may artificially limit the allocation size sent to > alloc_dev_dax_range(). IE the resource children can't be directly > used in the resize logic to find where space in the region is. This > also poses a problem of managing the available size in 2 places. > > 3) Maintain a separate resource tree with extents. This option is the > same as 2) but with the different data structure. Most ideally there > should be a unified representation of the resource tree not two places > to look for space. > > 4) Create region resource children for each extent. Manage the dax dev > resize logic in the same way as before but use a region child > (extent) resource as the parents to find space within each extent. > > Option 4 can leverage the existing resize algorithm to find space within > the extents. It manages the available space in a singular resource tree > which is less complicated for finding space. > > In preparation for this change, factor out the dev_dax_resize logic. > For static regions use dax_region->res as the parent to find space for > the dax ranges. Future patches will use the same algorithm with > individual extent resources as the parent. > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> > --- > Changes: > [iweiny: Rebase on new DAX region locking] > [iweiny: Reword commit message] > [iweiny: Drop reviews] > --- > drivers/dax/bus.c | 129 +++++++++++++++++++++++++++++++++--------------------- > 1 file changed, 79 insertions(+), 50 deletions(-) > > diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c > index d8cb5195a227..975860371d9f 100644 > --- a/drivers/dax/bus.c > +++ b/drivers/dax/bus.c > @@ -844,11 +844,9 @@ static int devm_register_dax_mapping(struct dev_dax *dev_dax, int range_id) > return 0; > } > > -static int alloc_dev_dax_range(struct dev_dax *dev_dax, u64 start, > - resource_size_t size) > +static int alloc_dev_dax_range(struct resource *parent, struct dev_dax *dev_dax, > + u64 start, resource_size_t size) > { > - struct dax_region *dax_region = dev_dax->region; > - struct resource *res = &dax_region->res; > struct device *dev = &dev_dax->dev; > struct dev_dax_range *ranges; > unsigned long pgoff = 0; > @@ -866,14 +864,14 @@ static int alloc_dev_dax_range(struct dev_dax *dev_dax, u64 start, > return 0; > } > > - alloc = __request_region(res, start, size, dev_name(dev), 0); > + alloc = __request_region(parent, start, size, dev_name(dev), 0); > if (!alloc) > return -ENOMEM; > > ranges = krealloc(dev_dax->ranges, sizeof(*ranges) > * (dev_dax->nr_range + 1), GFP_KERNEL); > if (!ranges) { > - __release_region(res, alloc->start, resource_size(alloc)); > + __release_region(parent, alloc->start, resource_size(alloc)); > return -ENOMEM; > } > > @@ -1026,50 +1024,45 @@ static bool adjust_ok(struct dev_dax *dev_dax, struct resource *res) > return true; > } > > -static ssize_t dev_dax_resize(struct dax_region *dax_region, > - struct dev_dax *dev_dax, resource_size_t size) > +/** > + * dev_dax_resize_static - Expand the device into the unused portion of the > + * region. This may involve adjusting the end of an existing resource, or > + * allocating a new resource. > + * > + * @parent: parent resource to allocate this range in > + * @dev_dax: DAX device to be expanded > + * @to_alloc: amount of space to alloc; must be <= space available in @parent > + * > + * Return the amount of space allocated or -ERRNO on failure > + */ > +static ssize_t dev_dax_resize_static(struct resource *parent, > + struct dev_dax *dev_dax, > + resource_size_t to_alloc) > { > - resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; > - resource_size_t dev_size = dev_dax_size(dev_dax); > - struct resource *region_res = &dax_region->res; > - struct device *dev = &dev_dax->dev; > struct resource *res, *first; > - resource_size_t alloc = 0; > int rc; > > - if (dev->driver) > - return -EBUSY; > - if (size == dev_size) > - return 0; > - if (size > dev_size && size - dev_size > avail) > - return -ENOSPC; > - if (size < dev_size) > - return dev_dax_shrink(dev_dax, size); > - > - to_alloc = size - dev_size; > - if (dev_WARN_ONCE(dev, !alloc_is_aligned(dev_dax, to_alloc), > - "resize of %pa misaligned\n", &to_alloc)) > - return -ENXIO; > - > - /* > - * Expand the device into the unused portion of the region. This > - * may involve adjusting the end of an existing resource, or > - * allocating a new resource. > - */ > -retry: > - first = region_res->child; > - if (!first) > - return alloc_dev_dax_range(dev_dax, dax_region->res.start, to_alloc); > + first = parent->child; > + if (!first) { > + rc = alloc_dev_dax_range(parent, dev_dax, > + parent->start, to_alloc); > + if (rc) > + return rc; > + return to_alloc; > + } > > - rc = -ENOSPC; > for (res = first; res; res = res->sibling) { > struct resource *next = res->sibling; > + resource_size_t alloc; > > /* space at the beginning of the region */ > - if (res == first && res->start > dax_region->res.start) { > - alloc = min(res->start - dax_region->res.start, to_alloc); > - rc = alloc_dev_dax_range(dev_dax, dax_region->res.start, alloc); > - break; > + if (res == first && res->start > parent->start) { > + alloc = min(res->start - parent->start, to_alloc); > + rc = alloc_dev_dax_range(parent, dev_dax, > + parent->start, alloc); > + if (rc) > + return rc; > + return alloc; > } > > alloc = 0; > @@ -1078,21 +1071,55 @@ static ssize_t dev_dax_resize(struct dax_region *dax_region, > alloc = min(next->start - (res->end + 1), to_alloc); > > /* space at the end of the region */ > - if (!alloc && !next && res->end < region_res->end) > - alloc = min(region_res->end - res->end, to_alloc); > + if (!alloc && !next && res->end < parent->end) > + alloc = min(parent->end - res->end, to_alloc); > > if (!alloc) > continue; > > if (adjust_ok(dev_dax, res)) { > rc = adjust_dev_dax_range(dev_dax, res, resource_size(res) + alloc); > - break; > + if (rc) > + return rc; > + return alloc; > } > - rc = alloc_dev_dax_range(dev_dax, res->end + 1, alloc); > - break; > + rc = alloc_dev_dax_range(parent, dev_dax, res->end + 1, alloc); > + if (rc) > + return rc; > + return alloc; > } > - if (rc) > - return rc; > + > + /* available was already calculated and should never be an issue */ > + dev_WARN_ONCE(&dev_dax->dev, 1, "space not found?"); > + return 0; > +} > + > +static ssize_t dev_dax_resize(struct dax_region *dax_region, > + struct dev_dax *dev_dax, resource_size_t size) > +{ > + resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; > + resource_size_t dev_size = dev_dax_size(dev_dax); > + struct device *dev = &dev_dax->dev; > + resource_size_t alloc = 0; > + > + if (dev->driver) > + return -EBUSY; > + if (size == dev_size) > + return 0; > + if (size > dev_size && size - dev_size > avail) > + return -ENOSPC; > + if (size < dev_size) > + return dev_dax_shrink(dev_dax, size); > + > + to_alloc = size - dev_size; > + if (dev_WARN_ONCE(dev, !alloc_is_aligned(dev_dax, to_alloc), > + "resize of %pa misaligned\n", &to_alloc)) > + return -ENXIO; > + > +retry: > + alloc = dev_dax_resize_static(&dax_region->res, dev_dax, to_alloc); > + if (alloc <= 0) > + return alloc; > to_alloc -= alloc; > if (to_alloc) > goto retry; > @@ -1198,7 +1225,8 @@ static ssize_t mapping_store(struct device *dev, struct device_attribute *attr, > > to_alloc = range_len(&r); > if (alloc_is_aligned(dev_dax, to_alloc)) > - rc = alloc_dev_dax_range(dev_dax, r.start, to_alloc); > + rc = alloc_dev_dax_range(&dax_region->res, dev_dax, r.start, > + to_alloc); > up_write(&dax_dev_rwsem); > up_write(&dax_region_rwsem); > > @@ -1466,7 +1494,8 @@ static struct dev_dax *__devm_create_dev_dax(struct dev_dax_data *data) > device_initialize(dev); > dev_set_name(dev, "dax%d.%d", dax_region->id, dev_dax->id); > > - rc = alloc_dev_dax_range(dev_dax, dax_region->res.start, data->size); > + rc = alloc_dev_dax_range(&dax_region->res, dev_dax, dax_region->res.start, > + data->size); > if (rc) > goto err_range; > >
On Fri, 16 Aug 2024 09:44:28 -0500 Ira Weiny <ira.weiny@intel.com> wrote: > Dynamic Capacity regions must limit dev dax resources to those areas > which have extents backing real memory. Such DAX regions are dubbed > 'sparse' regions. In order to manage where memory is available four > alternatives were considered: > > 1) Create a single region resource child on region creation which > reserves the entire region. Then as extents are added punch holes in > this reservation. This requires new resource manipulation to punch > the holes and still requires an additional iteration over the extent > areas which may already have existing dev dax resources used. > > 2) Maintain an ordered xarray of extents which can be queried while > processing the resize logic. The issue is that existing region->res > children may artificially limit the allocation size sent to > alloc_dev_dax_range(). IE the resource children can't be directly > used in the resize logic to find where space in the region is. This > also poses a problem of managing the available size in 2 places. > > 3) Maintain a separate resource tree with extents. This option is the > same as 2) but with the different data structure. Most ideally there > should be a unified representation of the resource tree not two places > to look for space. > > 4) Create region resource children for each extent. Manage the dax dev > resize logic in the same way as before but use a region child > (extent) resource as the parents to find space within each extent. > > Option 4 can leverage the existing resize algorithm to find space within > the extents. It manages the available space in a singular resource tree > which is less complicated for finding space. > > In preparation for this change, factor out the dev_dax_resize logic. > For static regions use dax_region->res as the parent to find space for > the dax ranges. Future patches will use the same algorithm with > individual extent resources as the parent. > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> I'm not 100% confident on this one, so will probably take another look before giving a tag. One trivial comment below. > +static ssize_t dev_dax_resize(struct dax_region *dax_region, > + struct dev_dax *dev_dax, resource_size_t size) > +{ > + resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; > + resource_size_t dev_size = dev_dax_size(dev_dax); > + struct device *dev = &dev_dax->dev; > + resource_size_t alloc = 0; No path in which this is not set before use. > + > + if (dev->driver) > + return -EBUSY; > + if (size == dev_size) > + return 0; > + if (size > dev_size && size - dev_size > avail) > + return -ENOSPC; > + if (size < dev_size) > + return dev_dax_shrink(dev_dax, size); > + > + to_alloc = size - dev_size; > + if (dev_WARN_ONCE(dev, !alloc_is_aligned(dev_dax, to_alloc), > + "resize of %pa misaligned\n", &to_alloc)) > + return -ENXIO; > + > +retry: > + alloc = dev_dax_resize_static(&dax_region->res, dev_dax, to_alloc); > + if (alloc <= 0) > + return alloc; > to_alloc -= alloc; > if (to_alloc) > goto retry;
Jonathan Cameron wrote: > On Fri, 16 Aug 2024 09:44:28 -0500 > Ira Weiny <ira.weiny@intel.com> wrote: > > > Dynamic Capacity regions must limit dev dax resources to those areas > > which have extents backing real memory. Such DAX regions are dubbed > > 'sparse' regions. In order to manage where memory is available four > > alternatives were considered: > > > > 1) Create a single region resource child on region creation which > > reserves the entire region. Then as extents are added punch holes in > > this reservation. This requires new resource manipulation to punch > > the holes and still requires an additional iteration over the extent > > areas which may already have existing dev dax resources used. > > > > 2) Maintain an ordered xarray of extents which can be queried while > > processing the resize logic. The issue is that existing region->res > > children may artificially limit the allocation size sent to > > alloc_dev_dax_range(). IE the resource children can't be directly > > used in the resize logic to find where space in the region is. This > > also poses a problem of managing the available size in 2 places. > > > > 3) Maintain a separate resource tree with extents. This option is the > > same as 2) but with the different data structure. Most ideally there > > should be a unified representation of the resource tree not two places > > to look for space. > > > > 4) Create region resource children for each extent. Manage the dax dev > > resize logic in the same way as before but use a region child > > (extent) resource as the parents to find space within each extent. > > > > Option 4 can leverage the existing resize algorithm to find space within > > the extents. It manages the available space in a singular resource tree > > which is less complicated for finding space. > > > > In preparation for this change, factor out the dev_dax_resize logic. > > For static regions use dax_region->res as the parent to find space for > > the dax ranges. Future patches will use the same algorithm with > > individual extent resources as the parent. > > > > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > I'm not 100% confident on this one, so will probably take another look > before giving a tag. Thanks. > One trivial comment below. > > > > > +static ssize_t dev_dax_resize(struct dax_region *dax_region, > > + struct dev_dax *dev_dax, resource_size_t size) > > +{ > > + resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; > > + resource_size_t dev_size = dev_dax_size(dev_dax); > > + struct device *dev = &dev_dax->dev; > > + resource_size_t alloc = 0; > > No path in which this is not set before use. fixed thanks Ira [snip]
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c index d8cb5195a227..975860371d9f 100644 --- a/drivers/dax/bus.c +++ b/drivers/dax/bus.c @@ -844,11 +844,9 @@ static int devm_register_dax_mapping(struct dev_dax *dev_dax, int range_id) return 0; } -static int alloc_dev_dax_range(struct dev_dax *dev_dax, u64 start, - resource_size_t size) +static int alloc_dev_dax_range(struct resource *parent, struct dev_dax *dev_dax, + u64 start, resource_size_t size) { - struct dax_region *dax_region = dev_dax->region; - struct resource *res = &dax_region->res; struct device *dev = &dev_dax->dev; struct dev_dax_range *ranges; unsigned long pgoff = 0; @@ -866,14 +864,14 @@ static int alloc_dev_dax_range(struct dev_dax *dev_dax, u64 start, return 0; } - alloc = __request_region(res, start, size, dev_name(dev), 0); + alloc = __request_region(parent, start, size, dev_name(dev), 0); if (!alloc) return -ENOMEM; ranges = krealloc(dev_dax->ranges, sizeof(*ranges) * (dev_dax->nr_range + 1), GFP_KERNEL); if (!ranges) { - __release_region(res, alloc->start, resource_size(alloc)); + __release_region(parent, alloc->start, resource_size(alloc)); return -ENOMEM; } @@ -1026,50 +1024,45 @@ static bool adjust_ok(struct dev_dax *dev_dax, struct resource *res) return true; } -static ssize_t dev_dax_resize(struct dax_region *dax_region, - struct dev_dax *dev_dax, resource_size_t size) +/** + * dev_dax_resize_static - Expand the device into the unused portion of the + * region. This may involve adjusting the end of an existing resource, or + * allocating a new resource. + * + * @parent: parent resource to allocate this range in + * @dev_dax: DAX device to be expanded + * @to_alloc: amount of space to alloc; must be <= space available in @parent + * + * Return the amount of space allocated or -ERRNO on failure + */ +static ssize_t dev_dax_resize_static(struct resource *parent, + struct dev_dax *dev_dax, + resource_size_t to_alloc) { - resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; - resource_size_t dev_size = dev_dax_size(dev_dax); - struct resource *region_res = &dax_region->res; - struct device *dev = &dev_dax->dev; struct resource *res, *first; - resource_size_t alloc = 0; int rc; - if (dev->driver) - return -EBUSY; - if (size == dev_size) - return 0; - if (size > dev_size && size - dev_size > avail) - return -ENOSPC; - if (size < dev_size) - return dev_dax_shrink(dev_dax, size); - - to_alloc = size - dev_size; - if (dev_WARN_ONCE(dev, !alloc_is_aligned(dev_dax, to_alloc), - "resize of %pa misaligned\n", &to_alloc)) - return -ENXIO; - - /* - * Expand the device into the unused portion of the region. This - * may involve adjusting the end of an existing resource, or - * allocating a new resource. - */ -retry: - first = region_res->child; - if (!first) - return alloc_dev_dax_range(dev_dax, dax_region->res.start, to_alloc); + first = parent->child; + if (!first) { + rc = alloc_dev_dax_range(parent, dev_dax, + parent->start, to_alloc); + if (rc) + return rc; + return to_alloc; + } - rc = -ENOSPC; for (res = first; res; res = res->sibling) { struct resource *next = res->sibling; + resource_size_t alloc; /* space at the beginning of the region */ - if (res == first && res->start > dax_region->res.start) { - alloc = min(res->start - dax_region->res.start, to_alloc); - rc = alloc_dev_dax_range(dev_dax, dax_region->res.start, alloc); - break; + if (res == first && res->start > parent->start) { + alloc = min(res->start - parent->start, to_alloc); + rc = alloc_dev_dax_range(parent, dev_dax, + parent->start, alloc); + if (rc) + return rc; + return alloc; } alloc = 0; @@ -1078,21 +1071,55 @@ static ssize_t dev_dax_resize(struct dax_region *dax_region, alloc = min(next->start - (res->end + 1), to_alloc); /* space at the end of the region */ - if (!alloc && !next && res->end < region_res->end) - alloc = min(region_res->end - res->end, to_alloc); + if (!alloc && !next && res->end < parent->end) + alloc = min(parent->end - res->end, to_alloc); if (!alloc) continue; if (adjust_ok(dev_dax, res)) { rc = adjust_dev_dax_range(dev_dax, res, resource_size(res) + alloc); - break; + if (rc) + return rc; + return alloc; } - rc = alloc_dev_dax_range(dev_dax, res->end + 1, alloc); - break; + rc = alloc_dev_dax_range(parent, dev_dax, res->end + 1, alloc); + if (rc) + return rc; + return alloc; } - if (rc) - return rc; + + /* available was already calculated and should never be an issue */ + dev_WARN_ONCE(&dev_dax->dev, 1, "space not found?"); + return 0; +} + +static ssize_t dev_dax_resize(struct dax_region *dax_region, + struct dev_dax *dev_dax, resource_size_t size) +{ + resource_size_t avail = dax_region_avail_size(dax_region), to_alloc; + resource_size_t dev_size = dev_dax_size(dev_dax); + struct device *dev = &dev_dax->dev; + resource_size_t alloc = 0; + + if (dev->driver) + return -EBUSY; + if (size == dev_size) + return 0; + if (size > dev_size && size - dev_size > avail) + return -ENOSPC; + if (size < dev_size) + return dev_dax_shrink(dev_dax, size); + + to_alloc = size - dev_size; + if (dev_WARN_ONCE(dev, !alloc_is_aligned(dev_dax, to_alloc), + "resize of %pa misaligned\n", &to_alloc)) + return -ENXIO; + +retry: + alloc = dev_dax_resize_static(&dax_region->res, dev_dax, to_alloc); + if (alloc <= 0) + return alloc; to_alloc -= alloc; if (to_alloc) goto retry; @@ -1198,7 +1225,8 @@ static ssize_t mapping_store(struct device *dev, struct device_attribute *attr, to_alloc = range_len(&r); if (alloc_is_aligned(dev_dax, to_alloc)) - rc = alloc_dev_dax_range(dev_dax, r.start, to_alloc); + rc = alloc_dev_dax_range(&dax_region->res, dev_dax, r.start, + to_alloc); up_write(&dax_dev_rwsem); up_write(&dax_region_rwsem); @@ -1466,7 +1494,8 @@ static struct dev_dax *__devm_create_dev_dax(struct dev_dax_data *data) device_initialize(dev); dev_set_name(dev, "dax%d.%d", dax_region->id, dev_dax->id); - rc = alloc_dev_dax_range(dev_dax, dax_region->res.start, data->size); + rc = alloc_dev_dax_range(&dax_region->res, dev_dax, dax_region->res.start, + data->size); if (rc) goto err_range;
Dynamic Capacity regions must limit dev dax resources to those areas which have extents backing real memory. Such DAX regions are dubbed 'sparse' regions. In order to manage where memory is available four alternatives were considered: 1) Create a single region resource child on region creation which reserves the entire region. Then as extents are added punch holes in this reservation. This requires new resource manipulation to punch the holes and still requires an additional iteration over the extent areas which may already have existing dev dax resources used. 2) Maintain an ordered xarray of extents which can be queried while processing the resize logic. The issue is that existing region->res children may artificially limit the allocation size sent to alloc_dev_dax_range(). IE the resource children can't be directly used in the resize logic to find where space in the region is. This also poses a problem of managing the available size in 2 places. 3) Maintain a separate resource tree with extents. This option is the same as 2) but with the different data structure. Most ideally there should be a unified representation of the resource tree not two places to look for space. 4) Create region resource children for each extent. Manage the dax dev resize logic in the same way as before but use a region child (extent) resource as the parents to find space within each extent. Option 4 can leverage the existing resize algorithm to find space within the extents. It manages the available space in a singular resource tree which is less complicated for finding space. In preparation for this change, factor out the dev_dax_resize logic. For static regions use dax_region->res as the parent to find space for the dax ranges. Future patches will use the same algorithm with individual extent resources as the parent. Signed-off-by: Ira Weiny <ira.weiny@intel.com> --- Changes: [iweiny: Rebase on new DAX region locking] [iweiny: Reword commit message] [iweiny: Drop reviews] --- drivers/dax/bus.c | 129 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 79 insertions(+), 50 deletions(-)