| Message ID | ME0P300MB04166144CDF92A72B9E1BAEA9D8F2@ME0P300MB0416.AUSP300.PROD.OUTLOOK.COM (mailing list archive) |
|---|---|
| Headers | show |
| Series | tracing/uprobe: Add missing filter for uretprobe | expand |
On Fri, 23 Aug 2024 01:36:20 +0800 Tianyi Liu <i.pear@outlook.com> wrote: > U(ret)probes are designed to be filterable using the PID, which is the > second parameter in the perf_event_open syscall. Currently, uprobe works > well with the filtering, but uretprobe is not affected by it. This often > leads to users being disturbed by events from uninterested processes while > using uretprobe. > > We found that the filter function was not invoked when uretprobe was > initially implemented, and this has been existing for ten years. We have > tested the patch under our workload, binding eBPF programs to uretprobe > tracepoints, and confirmed that it resolved our problem. > > Following are the steps to reproduce the issue: > > Step 1. Compile the following reproducer program: > ``` > #include <stdlib.h> > #include <unistd.h> > #include <stdio.h> > > int main() { > printf("pid: %d\n", getpid()); > while (1) { > sleep(2); > void *ptr = malloc(1024); > free(ptr); > } > } > ``` > We will then use uretprobe to trace the `malloc` function. > > Step 2. Run two instances of the reproducer program and record their PIDs. > > Step 3. Use uretprobe to trace each of the two running reproducers > separately. We use bpftrace to make it easier to reproduce. Please run two > instances of bpftrace simultaneously: the first instance filters events > from PID1, and the second instance filters events from PID2. > > The expected behavior is that each bpftrace instance would only print > events matching its respective PID filter. However, in practice, both > bpftrace instances receive events from both processes, the PID filter is > ineffective at this moment: > ``` > PID1=55256 > bpftrace -p $PID1 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' > Attaching 1 probe... > time=0 pid=55256 > time=2 pid=55273 > time=2 pid=55256 > time=4 pid=55273 > time=4 pid=55256 > time=6 pid=55273 > time=6 pid=55256 > > PID2=55273 > bpftrace -p $PID2 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' > Attaching 1 probe... > time=0 pid=55273 > time=0 pid=55256 > time=2 pid=55273 > time=2 pid=55256 > time=4 pid=55273 > time=4 pid=55256 > time=6 pid=55273 > time=6 pid=55256 > ``` > > After applying this patch, both bpftrace instances will show the expected > behavior, only printing events from the PID specified by their respective > filters: > ``` > PID1=1621 > bpftrace -p $PID1 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' > Attaching 1 probe... > time=0 pid=1621 > time=2 pid=1621 > time=4 pid=1621 > time=6 pid=1621 > > PID2=1633 > bpftrace -p $PID2 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' > Attaching 1 probe... > time=0 pid=1633 > time=2 pid=1633 > time=4 pid=1633 > time=6 pid=1633 > ``` This did not need a cover letter. The above could be added to the patch itself. Just don't say "After applying this patch", it should be: The expected behavior is that each bpftrace instance would only print events matching its respective PID filter. However, in practice, both bpftrace instances receive events from both processes, the PID filter is ineffective at this moment: Before: ``` PID1=55256 [..] time=6 pid=55256 ``` After: Both bpftrace instances will show the expected behavior, only printing events from the PID specified by their respective filters: ``` PID1=1621 -- Steve
U(ret)probes are designed to be filterable using the PID, which is the second parameter in the perf_event_open syscall. Currently, uprobe works well with the filtering, but uretprobe is not affected by it. This often leads to users being disturbed by events from uninterested processes while using uretprobe. We found that the filter function was not invoked when uretprobe was initially implemented, and this has been existing for ten years. We have tested the patch under our workload, binding eBPF programs to uretprobe tracepoints, and confirmed that it resolved our problem. Following are the steps to reproduce the issue: Step 1. Compile the following reproducer program: ``` #include <stdlib.h> #include <unistd.h> #include <stdio.h> int main() { printf("pid: %d\n", getpid()); while (1) { sleep(2); void *ptr = malloc(1024); free(ptr); } } ``` We will then use uretprobe to trace the `malloc` function. Step 2. Run two instances of the reproducer program and record their PIDs. Step 3. Use uretprobe to trace each of the two running reproducers separately. We use bpftrace to make it easier to reproduce. Please run two instances of bpftrace simultaneously: the first instance filters events from PID1, and the second instance filters events from PID2. The expected behavior is that each bpftrace instance would only print events matching its respective PID filter. However, in practice, both bpftrace instances receive events from both processes, the PID filter is ineffective at this moment: ``` PID1=55256 bpftrace -p $PID1 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' Attaching 1 probe... time=0 pid=55256 time=2 pid=55273 time=2 pid=55256 time=4 pid=55273 time=4 pid=55256 time=6 pid=55273 time=6 pid=55256 PID2=55273 bpftrace -p $PID2 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' Attaching 1 probe... time=0 pid=55273 time=0 pid=55256 time=2 pid=55273 time=2 pid=55256 time=4 pid=55273 time=4 pid=55256 time=6 pid=55273 time=6 pid=55256 ``` After applying this patch, both bpftrace instances will show the expected behavior, only printing events from the PID specified by their respective filters: ``` PID1=1621 bpftrace -p $PID1 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' Attaching 1 probe... time=0 pid=1621 time=2 pid=1621 time=4 pid=1621 time=6 pid=1621 PID2=1633 bpftrace -p $PID2 -e 'uretprobe:libc:malloc { printf("time=%llu pid=%d\n", elapsed / 1000000000, pid); }' Attaching 1 probe... time=0 pid=1633 time=2 pid=1633 time=4 pid=1633 time=6 pid=1633 ``` Tianyi Liu (1): tracing/uprobe: Add missing filter for uretprobe kernel/trace/trace_uprobe.c | 3 +++ 1 file changed, 3 insertions(+)