new file mode 100644
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4271.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS4271 audio CODEC
+
+maintainers:
+ - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+ - Nikita Shubin <nikita.shubin@maquefel.me>
+
+description:
+ The CS4271 is a stereo audio codec. This device supports both the I2C
+ and the SPI bus.
+
+allOf:
+ - $ref: dai-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: cirrus,cs4271
+
+ reg:
+ maxItems: 1
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ '#sound-dai-cells':
+ const: 0
+
+ reset-gpios:
+ description:
+ This pin will be deasserted before communication to the codec starts.
+ maxItems: 1
+
+ va-supply:
+ description: Analog power supply.
+
+ vd-supply:
+ description: Digital power supply.
+
+ vl-supply:
+ description: Serial Control Port power supply.
+
+ port:
+ $ref: audio-graph-port.yaml#
+ unevaluatedProperties: false
+
+ cirrus,amuteb-eq-bmutec:
+ description:
+ When given, the Codec's AMUTEB=BMUTEC flag is enabled.
+ type: boolean
+
+ cirrus,enable-soft-reset:
+ description: |
+ The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+ line is de-asserted. That also means that clocks cannot be changed
+ without putting the chip back into hardware reset, which also requires
+ a complete re-initialization of all registers.
+
+ One (undocumented) workaround is to assert and de-assert the PDN bit
+ in the MODE2 register. This workaround can be enabled with this DT
+ property.
+
+ Note that this is not needed in case the clocks are stable
+ throughout the entire runtime of the codec.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@0 {
+ compatible = "cirrus,cs4271";
+ reg = <0>;
+ #sound-dai-cells = <0>;
+ spi-max-frequency = <6000000>;
+ spi-cpol;
+ spi-cpha;
+ reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ port {
+ endpoint {
+ remote-endpoint = <&i2s_ep>;
+ };
+ };
+ };
+ };
+
+...
deleted file mode 100644
@@ -1,57 +0,0 @@
-Cirrus Logic CS4271 DT bindings
-
-This driver supports both the I2C and the SPI bus.
-
-Required properties:
-
- - compatible: "cirrus,cs4271"
-
-For required properties on SPI, please consult
-Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties on I2C:
-
- - reg: the i2c address
-
-
-Optional properties:
-
- - reset-gpio: a GPIO spec to define which pin is connected to the chip's
- !RESET pin
- - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag
- is enabled.
- - cirrus,enable-soft-reset:
- The CS4271 requires its LRCLK and MCLK to be stable before its RESET
- line is de-asserted. That also means that clocks cannot be changed
- without putting the chip back into hardware reset, which also requires
- a complete re-initialization of all registers.
-
- One (undocumented) workaround is to assert and de-assert the PDN bit
- in the MODE2 register. This workaround can be enabled with this DT
- property.
-
- Note that this is not needed in case the clocks are stable
- throughout the entire runtime of the codec.
-
- - vd-supply: Digital power
- - vl-supply: Logic power
- - va-supply: Analog Power
-
-Examples:
-
- codec_i2c: cs4271@10 {
- compatible = "cirrus,cs4271";
- reg = <0x10>;
- reset-gpio = <&gpio 23 0>;
- vd-supply = <&vdd_3v3_reg>;
- vl-supply = <&vdd_3v3_reg>;
- va-supply = <&vdd_3v3_reg>;
- };
-
- codec_spi: cs4271@0 {
- compatible = "cirrus,cs4271";
- reg = <0x0>;
- reset-gpio = <&gpio 23 0>;
- spi-max-frequency = <6000000>;
- };
-