mbox series

[v2,0/2] media: i2c: imx290: check for availability in probe()

Message ID 20240828-imx290-avail-v2-0-bd320ac8e8fa@skidata.com (mailing list archive)
Headers show
Series media: i2c: imx290: check for availability in probe() | expand

Message

Benjamin Bara Aug. 28, 2024, 6:13 p.m. UTC
Hi!

This series introduces i2c communication with the imx290 sensor during
probe s.t. the v4l2 subdev is not initialized when the chip is not
reachable.

The datasheets show that INCKSEL* registers have a different default
value after reset on imx290[1] and imx327[2], however I am not sure if
this is a sufficient identification option - therefore I just removed
the current CHIP_ID register for now.

thanks & regards
Benjamin

[1] https://static6.arrow.com/aropdfconversion/c0c7efde6571c768020a72f59b226308b9669e45/sony_imx290lqr-c_datasheet.pdf
[2] https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/138/IMX327LQR_2D00_C_5F00_TechnicalDatasheet_5F00_E_5F00_Rev0.2.pdf

---
Changes in v2:
- dropped 1/2 to ignore the read value in cci_read() (old 2/2 -> new 1/2)
- 1/2: read-back standby mode instead and ensure that it is really in standby
- new 2/2: drop chip_id register definition which seems to be incorrect
- Link to v1: https://lore.kernel.org/r/20240807-imx290-avail-v1-0-666c130c7601@skidata.com

---
Benjamin Bara (2):
      media: i2c: imx290: Check for availability in probe()
      media: i2c: imx290: Remove CHIP_ID reg definition

 drivers/media/i2c/imx290.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
---
base-commit: eec5d86d5bac6b3e972eb9c1898af3c08303c52d
change-id: 20240807-imx290-avail-85795c27d988

Best regards,

Comments

Sakari Ailus Aug. 29, 2024, 1:06 p.m. UTC | #1
Hi Benjamin,

On Wed, Aug 28, 2024 at 08:13:06PM +0200, Benjamin Bara wrote:
> Hi!
> 
> This series introduces i2c communication with the imx290 sensor during
> probe s.t. the v4l2 subdev is not initialized when the chip is not
> reachable.
> 
> The datasheets show that INCKSEL* registers have a different default
> value after reset on imx290[1] and imx327[2], however I am not sure if
> this is a sufficient identification option - therefore I just removed
> the current CHIP_ID register for now.

It seems your Sob line and From: do not match. Could you fix that, please?

The patches are otherwise here
<URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=devel>.