| Message ID | 20240904083103.1257480-1-dominique.martinet@atmark-techno.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/bridge: imx8mp-hdmi-tx: allow 0.5% margin with selected clock | expand |
On 04.09.24 10:31 AM, Dominique Martinet wrote: > This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we > cannot output the exact frequency, enabling the imx8mp HDMI output to > support more modes > > Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> > --- > This completes the patch series sent by Adam Ford here: > https://lkml.kernel.org/r/20240904023310.163371-1-aford173@gmail.com > > and makes the cheap screens we recommend work with our imx8mp board > without further kludging. > > > drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > index 13bc570c5473..9431cd5e06c3 100644 > --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > @@ -23,6 +23,7 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, > const struct drm_display_mode *mode) > { > struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data; > + long round_rate; > > if (mode->clock < 13500) > return MODE_CLOCK_LOW; > @@ -30,8 +31,9 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, > if (mode->clock > 297000) > return MODE_CLOCK_HIGH; > > - if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) != > - mode->clock * 1000) > + round_rate = clk_round_rate(hdmi->pixclk, mode->clock * 1000); > + /* accept 0.5% = 1/200 = 5/1000 tolerance */ > + if (abs(round_rate - mode->clock * 1000) > mode->clock * 5) > return MODE_CLOCK_RANGE; > > /* We don't support double-clocked and Interlaced modes */
On Wed, Sep 4, 2024 at 3:31 AM Dominique Martinet <dominique.martinet@atmark-techno.com> wrote: > > This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we > cannot output the exact frequency, enabling the imx8mp HDMI output to > support more modes > I went from 19 options on Modetest with my AOC 4K monitor to 31. Of those 31, three did not appear to sync, but not all the frequencies in the LUT sync for me either, so I have no objection to moving forward with this, but I wonder if we should have a note in there about why we have a 5% tolerance. > Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon > --- > This completes the patch series sent by Adam Ford here: > https://lkml.kernel.org/r/20240904023310.163371-1-aford173@gmail.com > > and makes the cheap screens we recommend work with our imx8mp board > without further kludging. > > > drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > index 13bc570c5473..9431cd5e06c3 100644 > --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c > @@ -23,6 +23,7 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, > const struct drm_display_mode *mode) > { > struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data; > + long round_rate; > > if (mode->clock < 13500) > return MODE_CLOCK_LOW; > @@ -30,8 +31,9 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, > if (mode->clock > 297000) > return MODE_CLOCK_HIGH; > > - if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) != > - mode->clock * 1000) > + round_rate = clk_round_rate(hdmi->pixclk, mode->clock * 1000); > + /* accept 0.5% = 1/200 = 5/1000 tolerance */ > + if (abs(round_rate - mode->clock * 1000) > mode->clock * 5) > return MODE_CLOCK_RANGE; > > /* We don't support double-clocked and Interlaced modes */ > -- > 2.39.2 > >
On Thu, Sep 05, 2024 at 08:23:51PM GMT, Adam Ford wrote: > On Wed, Sep 4, 2024 at 3:31 AM Dominique Martinet > <dominique.martinet@atmark-techno.com> wrote: > > > > This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we > > cannot output the exact frequency, enabling the imx8mp HDMI output to > > support more modes > > > I went from 19 options on Modetest with my AOC 4K monitor to 31. Of > those 31, three did not appear to sync, but not all the frequencies in > the LUT sync for me either, so I have no objection to moving forward > with this, but I wonder if we should have a note in there about why we > have a 5% tolerance. Yeah, I agree, it's something you want a comment for. Maxime
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c index 13bc570c5473..9431cd5e06c3 100644 --- a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c +++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c @@ -23,6 +23,7 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, const struct drm_display_mode *mode) { struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data; + long round_rate; if (mode->clock < 13500) return MODE_CLOCK_LOW; @@ -30,8 +31,9 @@ imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data, if (mode->clock > 297000) return MODE_CLOCK_HIGH; - if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) != - mode->clock * 1000) + round_rate = clk_round_rate(hdmi->pixclk, mode->clock * 1000); + /* accept 0.5% = 1/200 = 5/1000 tolerance */ + if (abs(round_rate - mode->clock * 1000) > mode->clock * 5) return MODE_CLOCK_RANGE; /* We don't support double-clocked and Interlaced modes */
This allows the hdmi driver to pick e.g. 64.8MHz instead of 65Mhz when we cannot output the exact frequency, enabling the imx8mp HDMI output to support more modes Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> --- This completes the patch series sent by Adam Ford here: https://lkml.kernel.org/r/20240904023310.163371-1-aford173@gmail.com and makes the cheap screens we recommend work with our imx8mp board without further kludging. drivers/gpu/drm/bridge/imx/imx8mp-hdmi-tx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)