| Message ID | 20240830034047.2251482-3-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Aspeed G7 gpio support | expand |
On Fri, 2024-08-30 at 11:40 +0800, Billy Tsai wrote: > The bank array name is only used to determine if the GPIO offset is valid, > and this condition can be replaced by checking if the offset exceeds the > ngpio property. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > drivers/gpio/gpio-aspeed.c | 17 ++++------------- > 1 file changed, 4 insertions(+), 13 deletions(-) > > diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c > index 04c03402db6d..24f50a0ea4ab 100644 > --- a/drivers/gpio/gpio-aspeed.c > +++ b/drivers/gpio/gpio-aspeed.c > @@ -77,7 +77,6 @@ struct aspeed_gpio_bank { > uint16_t debounce_regs; > uint16_t tolerance_regs; > uint16_t cmdsrc_regs; > - const char names[4][3]; > }; > > /* > @@ -104,7 +103,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0040, > .tolerance_regs = 0x001c, > .cmdsrc_regs = 0x0060, > - .names = { "A", "B", "C", "D" }, > }, > { > .val_regs = 0x0020, > @@ -113,7 +111,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0048, > .tolerance_regs = 0x003c, > .cmdsrc_regs = 0x0068, > - .names = { "E", "F", "G", "H" }, > }, > { > .val_regs = 0x0070, > @@ -122,7 +119,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x00b0, > .tolerance_regs = 0x00ac, > .cmdsrc_regs = 0x0090, > - .names = { "I", "J", "K", "L" }, > }, > { > .val_regs = 0x0078, > @@ -131,7 +127,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0100, > .tolerance_regs = 0x00fc, > .cmdsrc_regs = 0x00e0, > - .names = { "M", "N", "O", "P" }, > }, > { > .val_regs = 0x0080, > @@ -140,7 +135,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0130, > .tolerance_regs = 0x012c, > .cmdsrc_regs = 0x0110, > - .names = { "Q", "R", "S", "T" }, > }, > { > .val_regs = 0x0088, > @@ -149,7 +143,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0160, > .tolerance_regs = 0x015c, > .cmdsrc_regs = 0x0140, > - .names = { "U", "V", "W", "X" }, > }, > { > .val_regs = 0x01E0, > @@ -158,7 +151,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x0190, > .tolerance_regs = 0x018c, > .cmdsrc_regs = 0x0170, > - .names = { "Y", "Z", "AA", "AB" }, > }, > { > .val_regs = 0x01e8, > @@ -167,7 +159,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > .debounce_regs = 0x01c0, > .tolerance_regs = 0x01bc, > .cmdsrc_regs = 0x01a0, > - .names = { "AC", "", "", "" }, > }, > }; > > @@ -280,11 +271,11 @@ static inline const struct aspeed_bank_props *find_bank_props( > static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) > { > const struct aspeed_bank_props *props = find_bank_props(gpio, offset); > - const struct aspeed_gpio_bank *bank = to_bank(offset); > - unsigned int group = GPIO_OFFSET(offset) / 8; > > - return bank->names[group][0] != '\0' && > - (!props || ((props->input | props->output) & GPIO_BIT(offset))); > + if (offset > gpio->chip.ngpio) Should this be `>=`? ngpio is a count. Andrew > + return false; > + > + return (!props || ((props->input | props->output) & GPIO_BIT(offset))); > } > > static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
> > The bank array name is only used to determine if the GPIO offset is valid, > > and this condition can be replaced by checking if the offset exceeds the > > ngpio property. > > > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > > --- > > drivers/gpio/gpio-aspeed.c | 17 ++++------------- > > 1 file changed, 4 insertions(+), 13 deletions(-) > > > > diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c > > index 04c03402db6d..24f50a0ea4ab 100644 > > --- a/drivers/gpio/gpio-aspeed.c > > +++ b/drivers/gpio/gpio-aspeed.c > > @@ -77,7 +77,6 @@ struct aspeed_gpio_bank { > > uint16_t debounce_regs; > > uint16_t tolerance_regs; > > uint16_t cmdsrc_regs; > > - const char names[4][3]; > > }; > > > > /* > > @@ -104,7 +103,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0040, > > .tolerance_regs = 0x001c, > > .cmdsrc_regs = 0x0060, > > - .names = { "A", "B", "C", "D" }, > > }, > > { > > .val_regs = 0x0020, > > @@ -113,7 +111,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0048, > > .tolerance_regs = 0x003c, > > .cmdsrc_regs = 0x0068, > > - .names = { "E", "F", "G", "H" }, > > }, > > { > > .val_regs = 0x0070, > > @@ -122,7 +119,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x00b0, > > .tolerance_regs = 0x00ac, > > .cmdsrc_regs = 0x0090, > > - .names = { "I", "J", "K", "L" }, > > }, > > { > > .val_regs = 0x0078, > > @@ -131,7 +127,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0100, > > .tolerance_regs = 0x00fc, > > .cmdsrc_regs = 0x00e0, > > - .names = { "M", "N", "O", "P" }, > > }, > > { > > .val_regs = 0x0080, > > @@ -140,7 +135,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0130, > > .tolerance_regs = 0x012c, > > .cmdsrc_regs = 0x0110, > > - .names = { "Q", "R", "S", "T" }, > > }, > > { > > .val_regs = 0x0088, > > @@ -149,7 +143,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0160, > > .tolerance_regs = 0x015c, > > .cmdsrc_regs = 0x0140, > > - .names = { "U", "V", "W", "X" }, > > }, > > { > > .val_regs = 0x01E0, > > @@ -158,7 +151,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x0190, > > .tolerance_regs = 0x018c, > > .cmdsrc_regs = 0x0170, > > - .names = { "Y", "Z", "AA", "AB" }, > > }, > > { > > .val_regs = 0x01e8, > > @@ -167,7 +159,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { > > .debounce_regs = 0x01c0, > > .tolerance_regs = 0x01bc, > > .cmdsrc_regs = 0x01a0, > > - .names = { "AC", "", "", "" }, > > }, > > }; > > > > @@ -280,11 +271,11 @@ static inline const struct aspeed_bank_props *find_bank_props( > > static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) > > { > > const struct aspeed_bank_props *props = find_bank_props(gpio, offset); > > - const struct aspeed_gpio_bank *bank = to_bank(offset); > > - unsigned int group = GPIO_OFFSET(offset) / 8; > > > > - return bank->names[group][0] != '\0' && > > - (!props || ((props->input | props->output) & GPIO_BIT(offset))); > > + if (offset > gpio->chip.ngpio) > Should this be `>=`? ngpio is a count. Yes, it should be `>=`. I will fix it. Thanks > > + return false; > > + > > + return (!props || ((props->input | props->output) & GPIO_BIT(offset))); > > } > > > > static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 04c03402db6d..24f50a0ea4ab 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -77,7 +77,6 @@ struct aspeed_gpio_bank { uint16_t debounce_regs; uint16_t tolerance_regs; uint16_t cmdsrc_regs; - const char names[4][3]; }; /* @@ -104,7 +103,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0040, .tolerance_regs = 0x001c, .cmdsrc_regs = 0x0060, - .names = { "A", "B", "C", "D" }, }, { .val_regs = 0x0020, @@ -113,7 +111,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0048, .tolerance_regs = 0x003c, .cmdsrc_regs = 0x0068, - .names = { "E", "F", "G", "H" }, }, { .val_regs = 0x0070, @@ -122,7 +119,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x00b0, .tolerance_regs = 0x00ac, .cmdsrc_regs = 0x0090, - .names = { "I", "J", "K", "L" }, }, { .val_regs = 0x0078, @@ -131,7 +127,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0100, .tolerance_regs = 0x00fc, .cmdsrc_regs = 0x00e0, - .names = { "M", "N", "O", "P" }, }, { .val_regs = 0x0080, @@ -140,7 +135,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0130, .tolerance_regs = 0x012c, .cmdsrc_regs = 0x0110, - .names = { "Q", "R", "S", "T" }, }, { .val_regs = 0x0088, @@ -149,7 +143,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0160, .tolerance_regs = 0x015c, .cmdsrc_regs = 0x0140, - .names = { "U", "V", "W", "X" }, }, { .val_regs = 0x01E0, @@ -158,7 +151,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x0190, .tolerance_regs = 0x018c, .cmdsrc_regs = 0x0170, - .names = { "Y", "Z", "AA", "AB" }, }, { .val_regs = 0x01e8, @@ -167,7 +159,6 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = { .debounce_regs = 0x01c0, .tolerance_regs = 0x01bc, .cmdsrc_regs = 0x01a0, - .names = { "AC", "", "", "" }, }, }; @@ -280,11 +271,11 @@ static inline const struct aspeed_bank_props *find_bank_props( static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset) { const struct aspeed_bank_props *props = find_bank_props(gpio, offset); - const struct aspeed_gpio_bank *bank = to_bank(offset); - unsigned int group = GPIO_OFFSET(offset) / 8; - return bank->names[group][0] != '\0' && - (!props || ((props->input | props->output) & GPIO_BIT(offset))); + if (offset > gpio->chip.ngpio) + return false; + + return (!props || ((props->input | props->output) & GPIO_BIT(offset))); } static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
The bank array name is only used to determine if the GPIO offset is valid, and this condition can be replaced by checking if the offset exceeds the ngpio property. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/gpio/gpio-aspeed.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-)