@@ -149,6 +149,13 @@ info <object>::
Print object info for object reference `<object>`. This corresponds to the
output of `--batch-check`.
+remote-object-info <remote> <object>...::
+ Print object info for object references `<object>` at specified <remote> without
+ downloading objects from remote. If the object-info capability is not
+ supported by the server, the objects will be downloaded instead.
+ Error when no object references is provided.
+ This command may be combined with `--buffer`.
+
flush::
Used with `--buffer` to execute all preceding commands that were issued
since the beginning or since the last flush was issued. When `--buffer`
@@ -290,7 +297,8 @@ newline. The available atoms are:
The full hex representation of the object name.
`objecttype`::
- The type of the object (the same as `cat-file -t` reports).
+ The type of the object (the same as `cat-file -t` reports). See
+ `CAVEATS` below. Not supported by `remote-object-info`.
`objectsize`::
The size, in bytes, of the object (the same as `cat-file -s`
@@ -298,13 +306,14 @@ newline. The available atoms are:
`objectsize:disk`::
The size, in bytes, that the object takes up on disk. See the
- note about on-disk sizes in the `CAVEATS` section below.
+ note about on-disk sizes in the `CAVEATS` section below. Not
+ supported by `remote-object-info`.
`deltabase`::
If the object is stored as a delta on-disk, this expands to the
full hex representation of the delta base object name.
Otherwise, expands to the null OID (all zeroes). See `CAVEATS`
- below.
+ below. Not supported by `remote-object-info`.
`rest`::
If this atom is used in the output string, input lines are split
@@ -314,7 +323,9 @@ newline. The available atoms are:
line) are output in place of the `%(rest)` atom.
If no format is specified, the default format is `%(objectname)
-%(objecttype) %(objectsize)`.
+%(objecttype) %(objectsize)`, except remote-object-info command who uses
+`%(objectname) %(objectsize)` for now because "%(objecttype)" is not supported yet.
+When "%(objecttype)" is supported, default format should be unified.
If `--batch` is specified, or if `--batch-command` is used with the `contents`
command, the object information is followed by the object contents (consisting
@@ -396,6 +407,10 @@ scripting purposes.
CAVEATS
-------
+Note that since objecttype, objectsize:disk and deltabase are currently not supported by the
+remote-object-info, git will error and exit when they are in the format string.
+
+
Note that the sizes of objects on disk are reported accurately, but care
should be taken in drawing conclusions about which refs or objects are
responsible for disk usage. The size of a packed non-delta object may be
@@ -24,6 +24,9 @@
#include "promisor-remote.h"
#include "mailmap.h"
#include "write-or-die.h"
+#include "alias.h"
+#include "remote.h"
+#include "transport.h"
enum batch_mode {
BATCH_MODE_CONTENTS,
@@ -42,9 +45,12 @@ struct batch_options {
char input_delim;
char output_delim;
const char *format;
+ int use_remote_info;
};
static const char *force_path;
+static struct object_info *remote_object_info;
+static struct oid_array object_info_oids = OID_ARRAY_INIT;
static struct string_list mailmap = STRING_LIST_INIT_NODUP;
static int use_mailmap;
@@ -528,7 +534,7 @@ static void batch_one_object(const char *obj_name,
enum get_oid_result result;
result = get_oid_with_context(the_repository, obj_name,
- flags, &data->oid, &ctx);
+ flags, &data->oid, &ctx);
if (result != FOUND) {
switch (result) {
case MISSING_OBJECT:
@@ -576,6 +582,61 @@ static void batch_one_object(const char *obj_name,
object_context_release(&ctx);
}
+static int get_remote_info(struct batch_options *opt, int argc, const char **argv)
+{
+ int retval = 0;
+ struct remote *remote = NULL;
+ struct object_id oid;
+ struct string_list object_info_options = STRING_LIST_INIT_NODUP;
+ static struct transport *gtransport;
+
+ /*
+ * Change the format to "%(objectname) %(objectsize)" when
+ * remote-object-info command is used. Once we start supporting objecttype
+ * the default format should change to DEFAULT_FORMAT
+ */
+ if (!opt->format)
+ opt->format = "%(objectname) %(objectsize)";
+
+ remote = remote_get(argv[0]);
+ if (!remote)
+ die(_("must supply valid remote when using remote-object-info"));
+
+ oid_array_clear(&object_info_oids);
+ for (size_t i = 1; i < argc; i++) {
+ if (get_oid_hex(argv[i], &oid))
+ die(_("Not a valid object name %s"), argv[i]);
+ oid_array_append(&object_info_oids, &oid);
+ }
+
+ gtransport = transport_get(remote, NULL);
+ if (gtransport->smart_options) {
+ CALLOC_ARRAY(remote_object_info, object_info_oids.nr);
+ gtransport->smart_options->object_info = 1;
+ gtransport->smart_options->object_info_oids = &object_info_oids;
+ /*
+ * 'size' is the only option currently supported.
+ * Other options that are passed in the format will exit with error.
+ */
+ if (strstr(opt->format, "%(objectsize)")) {
+ string_list_append(&object_info_options, "size");
+ } else {
+ die(_("%s is currently not supported with remote-object-info"), opt->format);
+ }
+ if (object_info_options.nr > 0) {
+ gtransport->smart_options->object_info_options = &object_info_options;
+ gtransport->smart_options->object_info_data = remote_object_info;
+ retval = transport_fetch_refs(gtransport, NULL);
+ }
+ } else {
+ retval = -1;
+ }
+
+ string_list_clear(&object_info_options, 0);
+ transport_disconnect(gtransport);
+ return retval;
+}
+
struct object_cb_data {
struct batch_options *opt;
struct expand_data *expand;
@@ -667,6 +728,52 @@ static void parse_cmd_info(struct batch_options *opt,
batch_one_object(line, output, opt, data);
}
+static void parse_cmd_remote_object_info(struct batch_options *opt,
+ const char *line,
+ struct strbuf *output,
+ struct expand_data *data)
+{
+ int count;
+ const char **argv;
+
+ char *line_to_split = xstrdup_or_null(line);
+ count = split_cmdline(line_to_split, &argv);
+ if (get_remote_info(opt, count, argv))
+ goto cleanup;
+
+ opt->use_remote_info = 1;
+ data->skip_object_info = 1;
+ for (size_t i = 0; i < object_info_oids.nr; i++) {
+
+ data->oid = object_info_oids.oid[i];
+
+ if (remote_object_info[i].sizep) {
+ data->size = *remote_object_info[i].sizep;
+ } else {
+ /*
+ * When reaching here, it means remote-object-info can't retrive
+ * infomation from server withoug downloading them, and the objects
+ * have been fetched to client already.
+ * Print the infomation using the logic for local objects.
+ */
+ data->skip_object_info = 0;
+ }
+
+ opt->batch_mode = BATCH_MODE_INFO;
+ batch_object_write(argv[i+1], output, opt, data, NULL, 0);
+
+ }
+ opt->use_remote_info = 0;
+ data->skip_object_info = 0;
+
+cleanup:
+ for (size_t i = 0; i < object_info_oids.nr; i++)
+ free_object_info_contents(&remote_object_info[i]);
+ free(line_to_split);
+ free(argv);
+ free(remote_object_info);
+}
+
static void dispatch_calls(struct batch_options *opt,
struct strbuf *output,
struct expand_data *data,
@@ -696,9 +803,10 @@ static const struct parse_cmd {
parse_cmd_fn_t fn;
unsigned takes_args;
} commands[] = {
- { "contents", parse_cmd_contents, 1},
- { "info", parse_cmd_info, 1},
- { "flush", NULL, 0},
+ { "contents", parse_cmd_contents, 1 },
+ { "info", parse_cmd_info, 1 },
+ { "remote-object-info", parse_cmd_remote_object_info, 1 },
+ { "flush", NULL, 0 },
};
static void batch_objects_command(struct batch_options *opt,
@@ -2987,3 +2987,14 @@ int read_loose_object(const char *path,
munmap(map, mapsize);
return ret;
}
+
+void free_object_info_contents(struct object_info *object_info)
+{
+ if (!object_info)
+ return;
+ free(object_info->typep);
+ free(object_info->sizep);
+ free(object_info->disk_sizep);
+ free(object_info->delta_base_oid);
+ free(object_info->type_name);
+}
@@ -533,4 +533,7 @@ int for_each_object_in_pack(struct packed_git *p,
int for_each_packed_object(each_packed_object_fn, void *,
enum for_each_object_flags flags);
+/* Free pointers inside of object_info, but not object_info itself */
+void free_object_info_contents(struct object_info *object_info);
+
#endif /* OBJECT_STORE_LL_H */
new file mode 100755
@@ -0,0 +1,748 @@
+#!/bin/sh
+
+test_description='git cat-file --batch-command with remote-object-info command'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+. ./test-lib.sh
+
+echo_without_newline () {
+ printf '%s' "$*"
+}
+
+echo_without_newline_nul () {
+ echo_without_newline "$@" | tr '\n' '\0'
+}
+
+strlen () {
+ echo_without_newline "$1" | wc -c | sed -e 's/^ *//'
+}
+
+hello_content="Hello World"
+hello_size=$(strlen "$hello_content")
+hello_oid=$(echo_without_newline "$hello_content" | git hash-object --stdin)
+
+# This is how we get 13:
+# 13 = <file mode> + <a_space> + <file name> + <a_null>, where
+# file mode is 100644, which is 6 characters;
+# file name is hello, which is 5 characters
+# a space is 1 character and a null is 1 character
+tree_size=$(($(test_oid rawsz) + 13))
+
+commit_message="Initial commit"
+
+# This is how we get 137:
+# 137 = <tree header> + <a_space> + <a newline> +
+# <Author line> + <a newline> +
+# <Committer line> + <a newline> +
+# <a newline> +
+# <commit message length>
+# An easier way to calculate is: 1. use `git cat-file commit <commit hash> | wc -c`,
+# to get 177, 2. then deduct 40 hex characters to get 137
+commit_size=$(($(test_oid hexsz) + 137))
+
+tag_header_without_oid="type blob
+tag hellotag
+tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>"
+tag_header_without_timestamp="object $hello_oid
+$tag_header_without_oid"
+tag_description="This is a tag"
+tag_content="$tag_header_without_timestamp 0 +0000
+
+$tag_description"
+
+tag_oid=$(echo_without_newline "$tag_content" | git hash-object -t tag --stdin -w)
+tag_size=$(strlen "$tag_content")
+
+set_transport_variables () {
+ hello_sha1=$(echo_without_newline "$hello_content" | git hash-object --stdin)
+ tree_sha1=$(git -C "$1" write-tree)
+ commit_sha1=$(echo_without_newline "$commit_message" | git -C "$1" commit-tree $tree_sha1)
+ tag_sha1=$(echo_without_newline "$tag_content" | git -C "$1" hash-object -t tag --stdin -w)
+ tag_size=$(strlen "$tag_content")
+}
+
+# This section tests --batch-command with remote-object-info command
+# Since "%(objecttype)" is currently not supported by the command remote-object-info ,
+# the filters are set to "%(objectname) %(objectsize)" in some test cases.
+
+# Test --batch-command remote-object-info with 'git://' transport
+. "$TEST_DIRECTORY"/lib-git-daemon.sh
+start_git_daemon --export-all --enable=receive-pack
+daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent
+
+test_expect_success 'create repo to be served by git-daemon' '
+ git init "$daemon_parent" &&
+ echo_without_newline "$hello_content" > $daemon_parent/hello &&
+ git -C "$daemon_parent" update-index --add hello &&
+ git -C "$daemon_parent" config transfer.advertiseobjectinfo true &&
+ git clone "$GIT_DAEMON_URL/parent" -n "$daemon_parent/daemon_client_empty"
+'
+
+test_expect_success 'batch-command remote-object-info git://' '
+ (
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "$GIT_DAEMON_URL/parent" $hello_sha1
+ remote-object-info "$GIT_DAEMON_URL/parent" $tree_sha1
+ remote-object-info "$GIT_DAEMON_URL/parent" $commit_sha1
+ remote-object-info "$GIT_DAEMON_URL/parent" $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info git:// multiple sha1 per line' '
+ (
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "$GIT_DAEMON_URL/parent" $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info git:// default filter' '
+ (
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+ GIT_TRACE_PACKET=1 git cat-file --batch-command >actual <<-EOF &&
+ remote-object-info "$GIT_DAEMON_URL/parent" $hello_sha1 $tree_sha1
+ remote-object-info "$GIT_DAEMON_URL/parent" $commit_sha1 $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command --buffer remote-object-info git://' '
+ (
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+ remote-object-info "$GIT_DAEMON_URL/parent" $hello_sha1 $tree_sha1
+ remote-object-info "$GIT_DAEMON_URL/parent" $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ flush
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command -Z remote-object-info git:// default filter' '
+ (
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ printf "%s\0" "$hello_sha1 $hello_size" >expect &&
+ printf "%s\0" "$tree_sha1 $tree_size" >>expect &&
+ printf "%s\0" "$commit_sha1 $commit_size" >>expect &&
+ printf "%s\0" "$tag_sha1 $tag_size" >>expect &&
+
+ printf "%s\0" "$hello_sha1 missing" >>expect &&
+ printf "%s\0" "$tree_sha1 missing" >>expect &&
+ printf "%s\0" "$commit_sha1 missing" >>expect &&
+ printf "%s\0" "$tag_sha1 missing" >>expect &&
+
+ batch_input="remote-object-info $GIT_DAEMON_URL/parent $hello_sha1 $tree_sha1
+remote-object-info $GIT_DAEMON_URL/parent $commit_sha1 $tag_sha1
+info $hello_sha1
+info $tree_sha1
+info $commit_sha1
+info $tag_sha1
+" &&
+ echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+ git cat-file --batch-command -Z < commands_null_delimited >actual &&
+ test_cmp expect actual
+ )
+'
+
+# Test --batch-command remote-object-info with 'git://' and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+
+test_expect_success 'remote-object-info fallback git://: fetch objects to client' '
+ (
+ git -C "$daemon_parent" config transfer.advertiseobjectinfo false &&
+ set_transport_variables "$daemon_parent" &&
+ cd "$daemon_parent/daemon_client_empty" &&
+
+ # Prove object is not on the client
+ echo "$hello_sha1 missing" >expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ # These results prove remote-object-info can retrieve object info
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results are for the info command
+ # They prove objects are downloaded
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ remote-object-info $GIT_DAEMON_URL/parent $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+
+ # revert server state back
+ git -C "$daemon_parent" config transfer.advertiseobjectinfo true &&
+
+ test_cmp expect actual
+ )
+'
+
+stop_git_daemon
+
+# Test --batch-command remote-object-info with 'file://' transport
+# shellcheck disable=SC2016
+test_expect_success 'create repo to be served by file:// transport' '
+ git init server &&
+ git -C server config protocol.version 2 &&
+ git -C server config transfer.advertiseobjectinfo true &&
+ echo_without_newline "$hello_content" > server/hello &&
+ git -C server update-index --add hello &&
+ git clone -n "file://$(pwd)/server" file_client_empty
+'
+
+test_expect_success 'batch-command remote-object-info file://' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ cd file_client_empty &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "file://${server_path}" $hello_sha1
+ remote-object-info "file://${server_path}" $tree_sha1
+ remote-object-info "file://${server_path}" $commit_sha1
+ remote-object-info "file://${server_path}" $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info file:// multiple sha1 per line' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ cd file_client_empty &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "file://${server_path}" $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command --buffer remote-object-info file://' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ cd file_client_empty &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+ remote-object-info "file://${server_path}" $hello_sha1 $tree_sha1
+ remote-object-info "file://${server_path}" $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ flush
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info file:// default filter' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ cd file_client_empty &&
+
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ git cat-file --batch-command >actual <<-EOF &&
+ remote-object-info "file://${server_path}" $hello_sha1 $tree_sha1
+ remote-object-info "file://${server_path}" $commit_sha1 $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command -Z remote-object-info file:// default filter' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ cd file_client_empty &&
+
+ printf "%s\0" "$hello_sha1 $hello_size" >expect &&
+ printf "%s\0" "$tree_sha1 $tree_size" >>expect &&
+ printf "%s\0" "$commit_sha1 $commit_size" >>expect &&
+ printf "%s\0" "$tag_sha1 $tag_size" >>expect &&
+
+ printf "%s\0" "$hello_sha1 missing" >>expect &&
+ printf "%s\0" "$tree_sha1 missing" >>expect &&
+ printf "%s\0" "$commit_sha1 missing" >>expect &&
+ printf "%s\0" "$tag_sha1 missing" >>expect &&
+
+ batch_input="remote-object-info \"file://${server_path}\" $hello_sha1 $tree_sha1
+remote-object-info \"file://${server_path}\" $commit_sha1 $tag_sha1
+info $hello_sha1
+info $tree_sha1
+info $commit_sha1
+info $tag_sha1
+" &&
+ echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+ git cat-file --batch-command -Z < commands_null_delimited >actual &&
+ test_cmp expect actual
+ )
+'
+
+# Test --batch-command remote-object-info with 'file://' and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+
+test_expect_success 'remote-object-info fallback file://: fetch objects to client' '
+ (
+ set_transport_variables "server" &&
+ server_path="$(pwd)/server" &&
+ git -C "${server_path}" config transfer.advertiseobjectinfo false &&
+ cd file_client_empty &&
+
+ # Prove object is not on the client
+ echo "$hello_sha1 missing" >expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ # These results prove remote-object-info can retrieve object info
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results are for the info command
+ # They prove objects are downloaded
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ remote-object-info "file://${server_path}" $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+
+ # revert server state back
+ git -C "${server_path}" config transfer.advertiseobjectinfo true &&
+ test_cmp expect actual
+ )
+'
+
+# Test --batch-command remote-object-info with 'http://' transport with
+# transfer.advertiseobjectinfo set to true, i.e. server has object-info capability
+
+. "$TEST_DIRECTORY"/lib-httpd.sh
+start_httpd
+
+test_expect_success 'create repo to be served by http:// transport' '
+ git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true &&
+ git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo true &&
+ echo_without_newline "$hello_content" > $HTTPD_DOCUMENT_ROOT_PATH/http_parent/hello &&
+ git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" update-index --add hello &&
+ git clone "$HTTPD_URL/smart/http_parent" -n "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty"
+'
+
+test_expect_success 'batch-command remote-object-info http://' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $tree_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $commit_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info http:// one line' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" >actual <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command --buffer remote-object-info http://' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ # These results prove remote-object-info can get object info from the remote
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results prove remote-object-info did not download objects from the remote
+ echo "$hello_sha1 missing" >>expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ git cat-file --batch-command="%(objectname) %(objectsize)" --buffer >actual <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1 $tree_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ flush
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command remote-object-info http:// default filter' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ echo "$hello_sha1 $hello_size" >expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ git cat-file --batch-command >actual <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1 $tree_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $commit_sha1 $tag_sha1
+ EOF
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'batch-command -Z remote-object-info http:// default filter' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ printf "%s\0" "$hello_sha1 $hello_size" >expect &&
+ printf "%s\0" "$tree_sha1 $tree_size" >>expect &&
+ printf "%s\0" "$commit_sha1 $commit_size" >>expect &&
+ printf "%s\0" "$tag_sha1 $tag_size" >>expect &&
+
+ batch_input="remote-object-info $HTTPD_URL/smart/http_parent $hello_sha1 $tree_sha1
+remote-object-info $HTTPD_URL/smart/http_parent $commit_sha1 $tag_sha1
+" &&
+ echo_without_newline_nul "$batch_input" >commands_null_delimited &&
+
+ git cat-file --batch-command -Z < commands_null_delimited >actual &&
+ test_cmp expect actual
+ )
+'
+
+test_expect_success 'remote-object-info fails on unspported filter option (objectsize:disk)' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+ test_must_fail git cat-file --batch-command="%(objectsize:disk)" 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1
+ EOF
+ test_grep "%(objectsize:disk) is currently not supported with remote-object-info" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on unspported filter option (deltabase)' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+ test_must_fail git cat-file --batch-command="%(deltabase)" 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1
+ EOF
+ test_grep "%(deltabase) is currently not supported with remote-object-info" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on server with legacy protocol' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+ test_must_fail git -c protocol.version=0 cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1
+ EOF
+ test_grep "remote-object-info requires protocol v2" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on server with legacy protocol fallback' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+
+ test_must_fail git -c protocol.version=0 cat-file --batch-command 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1
+ EOF
+ test_grep "remote-object-info requires protocol v2" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on malformed OID' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ malformed_object_id="this_id_is_not_valid" &&
+
+ test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $malformed_object_id
+ EOF
+ test_grep "Not a valid object name '$malformed_object_id'" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on malformed OID fallback' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ malformed_object_id="this_id_is_not_valid" &&
+
+ test_must_fail git cat-file --batch-command 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $malformed_object_id
+ EOF
+ test_grep "Not a valid object name '$malformed_object_id'" err
+ )
+'
+
+test_expect_success 'remote-object-info fails on missing OID' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ git clone "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" missing_oid_repo &&
+ test_commit -C missing_oid_repo message1 c.txt &&
+ cd missing_oid_repo &&
+
+ object_id=$(git rev-parse message1:c.txt) &&
+ test_must_fail git cat-file --batch-command="%(objectname) %(objectsize)" 2>err <<-EOF &&
+ remote-object-info "$HTTPD_URL/smart/http_parent" $object_id
+ EOF
+ test_grep "object-info: not our ref $object_id" err
+ )
+'
+
+# Test --batch-command remote-object-info with 'http://' transport and
+# transfer.advertiseobjectinfo set to false, i.e. server does not have object-info capability
+
+test_expect_success 'remote-object-info fallback http://: fetch objects to client' '
+ (
+ set_transport_variables "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" &&
+ git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo false &&
+ cd "$HTTPD_DOCUMENT_ROOT_PATH/http_client_empty" &&
+
+ # Prove object is not on the client
+ echo "$hello_sha1 missing" >expect &&
+ echo "$tree_sha1 missing" >>expect &&
+ echo "$commit_sha1 missing" >>expect &&
+ echo "$tag_sha1 missing" >>expect &&
+
+ # These results prove remote-object-info can retrieve object info
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ # These results are for the info command
+ # They prove objects are downloaded
+ echo "$hello_sha1 $hello_size" >>expect &&
+ echo "$tree_sha1 $tree_size" >>expect &&
+ echo "$commit_sha1 $commit_size" >>expect &&
+ echo "$tag_sha1 $tag_size" >>expect &&
+
+ git cat-file --batch-command >actual <<-EOF &&
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ remote-object-info "$HTTPD_URL/smart/http_parent" $hello_sha1 $tree_sha1 $commit_sha1 $tag_sha1
+ info $hello_sha1
+ info $tree_sha1
+ info $commit_sha1
+ info $tag_sha1
+ EOF
+
+ # revert server state back
+ git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config transfer.advertiseobjectinfo true &&
+
+ test_cmp expect actual
+ )
+'
+
+# DO NOT add non-httpd-specific tests here, because the last part of this
+# test script is only executed when httpd is available and enabled.
+
+test_done