| Message ID | 20240926092952.1284435-4-luke@ljones.dev (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | platform/x86: introduce asus-armoury driver | expand |
On 9/26/2024 04:29, Luke D. Jones wrote: > The fw_attributes_class provides a much cleaner interface to all of the > attributes introduced to asus-wmi. This patch moves all of these extra No need to say "this patch". > attributes over to fw_attributes_class, and shifts the bulk of these > definitions to a new kernel module to reduce the clutter of asus-wmi > with the intention of deprecating the asus-wmi attributes in future. > > The work applies only to WMI methods which don't have a clearly defined > place within the sysfs and as a result ended up lumped together in > /sys/devices/platform/asus-nb-wmi/ with no standard API. > > Where possible the fw attrs now implement defaults, min, max, scalar, > choices, etc. As en example dgpu_disable becomes: > > /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/ > ├── current_value > ├── display_name > ├── possible_values > └── type > > as do other attributes. > > The ppt_* based attributes are removed in this initial patch as the > implementation is somewhat broken due to the WMI methods requiring a > set of limits on the values accepted (which is not provided by WMI). > > Signed-off-by: Luke D. Jones <luke@ljones.dev> > --- > drivers/platform/x86/Kconfig | 13 + > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/asus-armoury.c | 563 ++++++++++++++++++++++++++++ > drivers/platform/x86/asus-armoury.h | 146 ++++++++ > 4 files changed, 723 insertions(+) > create mode 100644 drivers/platform/x86/asus-armoury.c > create mode 100644 drivers/platform/x86/asus-armoury.h > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 3875abba5a79..dedf66e0d099 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -265,6 +265,19 @@ config ASUS_WIRELESS > If you choose to compile this driver as a module the module will be > called asus-wireless. > > +config ASUS_ARMOURY > + tristate "ASUS Armoury driver" > + depends on ACPI_WMI I don't think you need to depend on ACPI_WMI directly because ASUS_WMI also depends on it. > + depends on ASUS_WMI > + select FW_ATTR_CLASS > + help > + Say Y here if you have a WMI aware Asus machine and would like to use the > + firmware_attributes API to control various settings typically exposed in > + the ASUS Armoury Crate application available on Windows. > + > + To compile this driver as a module, choose M here: the module will > + be called asus-armoury. > + > config ASUS_WMI > tristate "ASUS WMI Driver" > depends on ACPI_WMI > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index e1b142947067..fe3e7e7dede8 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -32,6 +32,7 @@ obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o > # ASUS > obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o > obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o > +obj-$(CONFIG_ASUS_ARMOURY) += asus-armoury.o > obj-$(CONFIG_ASUS_WMI) += asus-wmi.o > obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o > obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o > diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c > new file mode 100644 > index 000000000000..39e422b16b8e > --- /dev/null > +++ b/drivers/platform/x86/asus-armoury.c > @@ -0,0 +1,563 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Asus Armoury (WMI) attributes driver. This driver uses the fw_attributes > + * class to expose the various WMI functions that many gaming and some > + * non-gaming ASUS laptops have available. > + * These typically don't fit anywhere else in the sysfs such as under LED class, > + * hwmon or other, and are set in Windows using the ASUS Armoury Crate tool. > + * > + * Copyright(C) 2010 Intel Corporation. > + * Copyright(C) 2024-2024 Luke Jones <luke@ljones.dev> > + */ > + > +#include <linux/bitfield.h> > +#include <linux/device.h> > +#include <linux/dmi.h> > +#include <linux/errno.h> > +#include <linux/fs.h> > +#include <linux/kernel.h> > +#include <linux/kmod.h> > +#include <linux/kobject.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/platform_data/x86/asus-wmi.h> > +#include <linux/types.h> > + > +#include "asus-armoury.h" > +#include "firmware_attributes_class.h" > +#include "asus-wmi.h" > + > +#define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C" > + > +#define ASUS_MINI_LED_MODE_MASK 0x03 > +/* Standard modes for devices with only on/off */ > +#define ASUS_MINI_LED_OFF 0x00 > +#define ASUS_MINI_LED_ON 0x01 > +/* Like "on" but the effect is more vibrant or brighter */ > +#define ASUS_MINI_LED_STRONG_MODE 0x02 > +/* New modes for devices with 3 mini-led mode types */ > +#define ASUS_MINI_LED_2024_WEAK 0x00 > +#define ASUS_MINI_LED_2024_STRONG 0x01 > +#define ASUS_MINI_LED_2024_OFF 0x02 > + > +/* Default limits for tunables available on ASUS ROG laptops */ > +#define PPT_CPU_LIMIT_MIN 5 > +#define PPT_CPU_LIMIT_MAX 150 > +#define PPT_CPU_LIMIT_DEFAULT 80 > +#define PPT_PLATFORM_MIN 5 > +#define PPT_PLATFORM_MAX 100 > +#define PPT_PLATFORM_DEFAULT 80 > +#define NVIDIA_BOOST_MIN 5 > +#define NVIDIA_BOOST_MAX 25 > +#define NVIDIA_TEMP_MIN 75 > +#define NVIDIA_TEMP_MAX 87 Purely for alphabetical order purposes shouldn't NVIDIA_* come before PPT*? Also can you leave a comment where these default limits come from? > + > +static const struct class *fw_attr_class; > + > +struct asus_armoury_priv { > + struct device *fw_attr_dev; > + struct kset *fw_attr_kset; > + > + u32 mini_led_dev_id; > + u32 gpu_mux_dev_id; > + > + struct mutex mutex; > +}; > + > +static struct asus_armoury_priv asus_armoury = { .mutex = __MUTEX_INITIALIZER( > + asus_armoury.mutex) }; > + > +struct fw_attrs_group { > + bool pending_reboot; > +}; > + > +static struct fw_attrs_group fw_attrs = { > + .pending_reboot = false, > +}; > + > +struct asus_attr_group { > + const struct attribute_group *attr_group; > + u32 wmi_devid; > +}; > + > +static bool asus_wmi_is_present(u32 dev_id) > +{ > + u32 retval; > + int status; > + > + status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, &retval); > + pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval); > + > + return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT); It seems like you're hiding the potential ACPI failures which could make this a bit harder to debug in the future. What do you think about doing it like this: u32 ret; if (!asus_wmi_evaluate_method()) { pr_debug("acpi_wmi_evaluate_method failed\n"); return false; } return ret & ASUS_WMI_DSDTS_PRESENCE_BIT; > +} > + > +static void asus_set_reboot_and_signal_event(void) > +{ > + fw_attrs.pending_reboot = true; > + kobject_uevent(&asus_armoury.fw_attr_dev->kobj, KOBJ_CHANGE); > +} > + > +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) > +{ > + return sysfs_emit(buf, "%d\n", fw_attrs.pending_reboot); > +} > + > +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot); > + > +static bool asus_bios_requires_reboot(struct kobj_attribute *attr) > +{ > + return !strcmp(attr->attr.name, "gpu_mux_mode"); > +} > + > +/** > + * attr_int_store() - Generic store function for use with most WMI functions. > + * @kobj: Pointer to the driver object. > + * @kobj_attribute: Pointer to the attribute calling this function. > + * @buf: The buffer to read from, this is parsed to `int` type. > + * @count: Missing a description here. > + * @min: Minimum accepted value. Below this returns -EINVAL. > + * @max: Maximum accepted value. Above this returns -EINVAL. > + * @store_value: Pointer to where the parsed value should be stored. > + * @wmi_dev: The WMI function ID to use. > + * > + * The WMI functions available on most ASUS laptops return a 1 as "success", and > + * a 0 as failed. However some functions can return n > 1 for additional errors. > + * attr_int_store() currently treats all values which are not 1 as errors, ignoring IMO; Don't refer to function() in the description. > + * the possible differences in WMI error returns. > + * > + * Returns: Either count, or an error. > + */ > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, > + size_t count, u32 min, u32 max, u32 *store_value, u32 wmi_dev) > +{ > + u32 result, value; > + int err; > + > + err = kstrtouint(buf, 10, &value); > + if (err) > + return err; > + > + if (value < min || value > max) > + return -EINVAL; > + > + err = asus_wmi_set_devstate(wmi_dev, value, &result); > + if (err) { > + pr_err("Failed to set %s: %d\n", attr->attr.name, err); > + return err; > + } > + > + if (result != 1) { > + pr_err("Failed to set %s (result): 0x%x\n", attr->attr.name, result); > + return -EIO; > + } > + > + if (store_value != NULL) > + *store_value = value; > + sysfs_notify(kobj, NULL, attr->attr.name); > + > + if (asus_bios_requires_reboot(attr)) > + asus_set_reboot_and_signal_event(); > + > + return count; > +} > + > +/* Mini-LED mode **************************************************************/ > +static ssize_t mini_led_mode_current_value_show(struct kobject *kobj, > + struct kobj_attribute *attr, char *buf) > +{ > + u32 value; > + int err; > + > + err = asus_wmi_get_devstate_dsts(asus_armoury.mini_led_dev_id, &value); > + if (err) > + return err; > + > + value &= ASUS_MINI_LED_MODE_MASK; > + > + /* > + * Remap the mode values to match previous generation mini-LED. The last gen > + * WMI 0 == off, while on this version WMI 2 == off (flipped). > + */ > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { > + switch (value) { > + case ASUS_MINI_LED_2024_WEAK: > + value = ASUS_MINI_LED_ON; > + break; > + case ASUS_MINI_LED_2024_STRONG: > + value = ASUS_MINI_LED_STRONG_MODE; > + break; > + case ASUS_MINI_LED_2024_OFF: > + value = ASUS_MINI_LED_OFF; > + break; > + } > + } > + > + return sysfs_emit(buf, "%u\n", value); > +} > + > +static ssize_t mini_led_mode_current_value_store(struct kobject *kobj, > + struct kobj_attribute *attr, const char *buf, > + size_t count) > +{ > + int result, err; > + u32 mode; > + > + err = kstrtou32(buf, 10, &mode); > + if (err) > + return err; > + > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE && > + mode > ASUS_MINI_LED_ON) > + return -EINVAL; > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 && > + mode > ASUS_MINI_LED_STRONG_MODE) > + return -EINVAL; > + > + /* > + * Remap the mode values so expected behaviour is the same as the last > + * generation of mini-LED with 0 == off, 1 == on. > + */ > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { > + switch (mode) { > + case ASUS_MINI_LED_OFF: > + mode = ASUS_MINI_LED_2024_OFF; > + break; > + case ASUS_MINI_LED_ON: > + mode = ASUS_MINI_LED_2024_WEAK; > + break; > + case ASUS_MINI_LED_STRONG_MODE: > + mode = ASUS_MINI_LED_2024_STRONG; > + break; > + } > + } > + > + err = asus_wmi_set_devstate(asus_armoury.mini_led_dev_id, mode, &result); > + if (err) { > + pr_warn("Failed to set mini-LED: %d\n", err); > + return err; > + } > + > + if (result != 1) { > + pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result); > + return -EIO; > + } > + > + sysfs_notify(kobj, NULL, attr->attr.name); > + > + return count; > +} > + > +static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj, > + struct kobj_attribute *attr, char *buf) > +{ > + switch (asus_armoury.mini_led_dev_id) { > + case ASUS_WMI_DEVID_MINI_LED_MODE: > + return sysfs_emit(buf, "0;1\n"); > + case ASUS_WMI_DEVID_MINI_LED_MODE2: > + return sysfs_emit(buf, "0;1;2\n"); > + } > + > + return sysfs_emit(buf, "0\n"); > +} > + > +ATTR_GROUP_ENUM_CUSTOM(mini_led_mode, "mini_led_mode", "Set the mini-LED backlight mode"); > + > +static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj, > + struct kobj_attribute *attr, const char *buf, > + size_t count) > +{ > + int result, err; > + u32 optimus; > + > + err = kstrtou32(buf, 10, &optimus); > + if (err) > + return err; > + > + if (optimus > 1) > + return -EINVAL; > + > + if (asus_wmi_is_present(ASUS_WMI_DEVID_DGPU)) { > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_DGPU, &result); > + if (err) > + return err; > + if (result && !optimus) { > + err = -ENODEV; > + pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %02X %02X %d\n", > + result, optimus, err); > + return err; > + } > + } > + > + if (asus_wmi_is_present(ASUS_WMI_DEVID_EGPU)) { > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU, &result); > + if (err) > + return err; > + if (result && !optimus) { > + err = -ENODEV; > + pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n", > + err); > + return err; > + } > + } > + > + err = asus_wmi_set_devstate(asus_armoury.gpu_mux_dev_id, optimus, &result); > + if (err) { > + pr_err("Failed to set GPU MUX mode: %d\n", err); > + return err; > + } > + /* !1 is considered a fail by ASUS */ > + if (result != 1) { > + pr_warn("Failed to set GPU MUX mode (result): 0x%x\n", result); > + return -EIO; > + } > + > + sysfs_notify(kobj, NULL, attr->attr.name); > + asus_set_reboot_and_signal_event(); > + > + return count; > +} > +WMI_SHOW_INT(gpu_mux_mode_current_value, "%d\n", asus_armoury.gpu_mux_dev_id); > +ATTR_GROUP_BOOL_CUSTOM(gpu_mux_mode, "gpu_mux_mode", "Set the GPU display MUX mode"); > + > +/* > + * A user may be required to store the value twice, typical store first, then > + * rescan PCI bus to activate power, then store a second time to save correctly. > + * The reason for this is that an extra code path in the ACPI is enabled when > + * the device and bus are powered. > + */ > +static ssize_t dgpu_disable_current_value_store(struct kobject *kobj, > + struct kobj_attribute *attr, const char *buf, > + size_t count) > +{ > + int result, err; > + u32 disable; > + > + err = kstrtou32(buf, 10, &disable); > + if (err) > + return err; > + > + if (disable > 1) > + return -EINVAL; > + > + if (asus_armoury.gpu_mux_dev_id) { > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); > + if (err) > + return err; > + if (!result && disable) { > + err = -ENODEV; > + pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err); > + return err; > + } > + } > + > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, disable, &result); > + if (err) { > + pr_warn("Failed to set dGPU disable: %d\n", err); > + return err; > + } > + > + if (result != 1) { > + pr_warn("Failed to set dGPU disable (result): 0x%x\n", result); > + return -EIO; > + } > + > + sysfs_notify(kobj, NULL, attr->attr.name); > + > + return count; > +} > +WMI_SHOW_INT(dgpu_disable_current_value, "%d\n", ASUS_WMI_DEVID_DGPU); > +ATTR_GROUP_BOOL_CUSTOM(dgpu_disable, "dgpu_disable", "Disable the dGPU"); > + > +/* The ACPI call to enable the eGPU also disables the internal dGPU */ > +static ssize_t egpu_enable_current_value_store(struct kobject *kobj, struct kobj_attribute *attr, > + const char *buf, size_t count) > +{ > + int result, err; > + u32 enable; > + > + err = kstrtou32(buf, 10, &enable); > + if (err) > + return err; > + > + if (enable > 1) > + return -EINVAL; > + > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU_CONNECTED, &result); > + if (err) { > + pr_warn("Failed to get eGPU connection status: %d\n", err); > + return err; > + } > + > + if (asus_armoury.gpu_mux_dev_id) { > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); > + if (err) { > + pr_warn("Failed to get GPU MUX status: %d\n", result); > + return result; > + } > + if (!result && enable) { > + err = -ENODEV; > + pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err); > + return err; > + } > + } > + > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, enable, &result); > + if (err) { > + pr_warn("Failed to set eGPU state: %d\n", err); > + return err; > + } > + > + if (result != 1) { > + pr_warn("Failed to set eGPU state (retval): 0x%x\n", result); > + return -EIO; > + } > + > + sysfs_notify(kobj, NULL, attr->attr.name); > + > + return count; > +} > +WMI_SHOW_INT(egpu_enable_current_value, "%d\n", ASUS_WMI_DEVID_EGPU); > +ATTR_GROUP_BOOL_CUSTOM(egpu_enable, "egpu_enable", "Enable the eGPU (also disables dGPU)"); > + > +/* Simple attribute creation */ > +ATTR_GROUP_ENUM_INT_RO(charge_mode, "charge_mode", ASUS_WMI_DEVID_CHARGE_MODE, "0;1;2", > + "Show the current mode of charging"); > + > +ATTR_GROUP_BOOL_RW(boot_sound, "boot_sound", ASUS_WMI_DEVID_BOOT_SOUND, > + "Set the boot POST sound"); > +ATTR_GROUP_BOOL_RW(mcu_powersave, "mcu_powersave", ASUS_WMI_DEVID_MCU_POWERSAVE, > + "Set MCU powersaving mode"); > +ATTR_GROUP_BOOL_RW(panel_od, "panel_overdrive", ASUS_WMI_DEVID_PANEL_OD, > + "Set the panel refresh overdrive"); > +ATTR_GROUP_BOOL_RO(egpu_connected, "egpu_connected", ASUS_WMI_DEVID_EGPU_CONNECTED, > + "Show the eGPU connection status"); > + > +/* If an attribute does not require any special case handling add it here */ > +static const struct asus_attr_group armoury_attr_groups[] = { > + { &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED }, > + { &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU }, > + { &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU }, > + > + { &charge_mode_attr_group, ASUS_WMI_DEVID_CHARGE_MODE }, > + { &boot_sound_attr_group, ASUS_WMI_DEVID_BOOT_SOUND }, > + { &mcu_powersave_attr_group, ASUS_WMI_DEVID_MCU_POWERSAVE }, > + { &panel_od_attr_group, ASUS_WMI_DEVID_PANEL_OD }, > +}; > + > +static int asus_fw_attr_add(void) > +{ > + int err; > + > + err = fw_attributes_class_get(&fw_attr_class); > + if (err) > + goto fail_class_created; Is that right? If you fail to get the class shouldn't you just return an error code? > + > + asus_armoury.fw_attr_dev = > + device_create(fw_attr_class, NULL, MKDEV(0, 0), NULL, "%s", DRIVER_NAME); > + > + if (IS_ERR(asus_armoury.fw_attr_dev)) { > + err = PTR_ERR(asus_armoury.fw_attr_dev); > + goto fail_class_created; > + } > + > + asus_armoury.fw_attr_kset = > + kset_create_and_add("attributes", NULL, &asus_armoury.fw_attr_dev->kobj); > + if (!asus_armoury.fw_attr_dev) { > + err = -ENOMEM; > + pr_debug("Failed to create and add attributes\n"); > + goto err_destroy_classdev; > + } > + > + err = sysfs_create_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); > + if (err) { > + pr_warn("Failed to create sysfs level attributes\n"); > + goto fail_class_created; > + } > + > + err = 0; This seems unnecessary. > + asus_armoury.mini_led_dev_id = 0; > + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) { > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > + &mini_led_mode_attr_group); > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) { > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > + &mini_led_mode_attr_group); > + } > + if (err) > + pr_warn("Failed to create sysfs-group for mini_led\n"); Shouldn't you fail and clean up here? > + > + err = 0; Assuming you follow my above comment this is unnecessary. > + asus_armoury.gpu_mux_dev_id = 0; > + if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX)) { > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX; > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > + &gpu_mux_mode_attr_group); > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX_VIVO)) { > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX_VIVO; > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > + &gpu_mux_mode_attr_group); > + } > + if (err) > + pr_warn("Failed to create sysfs-group for gpu_mux\n"); Shouldn't you fail and clean up here? > + > + for (int i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) { > + if (!asus_wmi_is_present(armoury_attr_groups[i].wmi_devid)) > + continue; > + > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > + armoury_attr_groups[i].attr_group); > + if (err) > + pr_warn("Failed to create sysfs-group for %s\n", > + armoury_attr_groups[i].attr_group->name); Shouldn't you fail and clean up here? > + else > + pr_debug("Created sysfs-group for %s\n", > + armoury_attr_groups[i].attr_group->name); > + } > + > + return 0; > + > +err_destroy_classdev: > + device_destroy(fw_attr_class, MKDEV(0, 0)); > + > +fail_class_created: > + fw_attributes_class_put(); > + return err; > +} > + > +/* Init / exit ****************************************************************/ > + > +static int __init asus_fw_init(void) > +{ > + int err; > + > + fw_attrs.pending_reboot = false; Isn't it already initialized to false? > + > + err = asus_fw_attr_add(); > + if (err) > + return err; > + > + return 0; > +} > + > +static void __exit asus_fw_exit(void) > +{ > + mutex_lock(&asus_armoury.mutex); I think you should be using this mutex more. For example what if an attribute is being written while the module is unloaded? > + > + sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); > + kset_unregister(asus_armoury.fw_attr_kset); > + device_destroy(fw_attr_class, MKDEV(0, 0)); > + fw_attributes_class_put(); > + > + mutex_unlock(&asus_armoury.mutex); > +} > + > +module_init(asus_fw_init); > +module_exit(asus_fw_exit); > + > +MODULE_IMPORT_NS(ASUS_WMI); > +MODULE_AUTHOR("Luke Jones <luke@ljones.dev>"); > +MODULE_DESCRIPTION("ASUS BIOS Configuration Driver"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("wmi:" ASUS_NB_WMI_EVENT_GUID); > diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h > new file mode 100644 > index 000000000000..b99fd136abf1 > --- /dev/null > +++ b/drivers/platform/x86/asus-armoury.h > @@ -0,0 +1,146 @@ > +/* SPDX-License-Identifier: GPL-2.0 > + * > + * Definitions for kernel modules using asus-armoury driver > + * > + * Copyright (c) 2024 Luke Jones <luke@ljones.dev> > + */ > + > +#ifndef _ASUS_BIOSCFG_H_ > +#define _ASUS_BIOSCFG_H_ > + > +#include <linux/types.h> > +#include <linux/platform_device.h> > + > +#define DRIVER_NAME "asus-armoury" > + > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, > + const char *buf, size_t count, u32 min, u32 max, > + u32 *store_value, u32 wmi_dev); > + > +static ssize_t enum_type_show(struct kobject *kobj, struct kobj_attribute *attr, > + char *buf) > +{ > + return sysfs_emit(buf, "enumeration\n"); > +} > + > +#define __ASUS_ATTR_RO(_func, _name) \ > + { \ > + .attr = { .name = __stringify(_name), .mode = 0444 }, \ > + .show = _func##_##_name##_show, \ > + } > + > +#define __ASUS_ATTR_RO_AS(_name, _show) \ > + { \ > + .attr = { .name = __stringify(_name), .mode = 0444 }, \ > + .show = _show, \ > + } > + > +#define __ASUS_ATTR_RW(_func, _name) \ > + __ATTR(_name, 0644, _func##_##_name##_show, _func##_##_name##_store) > + > +#define __WMI_STORE_INT(_attr, _min, _max, _wmi) \ > + static ssize_t _attr##_store(struct kobject *kobj, \ > + struct kobj_attribute *attr, \ > + const char *buf, size_t count) \ > + { \ > + return attr_int_store(kobj, attr, buf, count, _min, _max, \ > + NULL, _wmi); \ > + } > + > +#define WMI_SHOW_INT(_attr, _fmt, _wmi) \ > + static ssize_t _attr##_show(struct kobject *kobj, \ > + struct kobj_attribute *attr, char *buf) \ > + { \ > + u32 result; \ > + int err; \ > + err = asus_wmi_get_devstate_dsts(_wmi, &result); \ > + if (err) \ > + return err; \ > + return sysfs_emit(buf, _fmt, \ > + result & ~ASUS_WMI_DSTS_PRESENCE_BIT); \ > + } > + > +/* Create functions and attributes for use in other macros or on their own */ > + > +#define __ATTR_CURRENT_INT_RO(_attr, _wmi) \ > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ > + static struct kobj_attribute attr_##_attr##_current_value = \ > + __ASUS_ATTR_RO(_attr, current_value) > + > +#define __ATTR_CURRENT_INT_RW(_attr, _minv, _maxv, _wmi) \ > + __WMI_STORE_INT(_attr##_current_value, _minv, _maxv, _wmi); \ > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ > + static struct kobj_attribute attr_##_attr##_current_value = \ > + __ASUS_ATTR_RW(_attr, current_value) > + > +/* Shows a formatted static variable */ > +#define __ATTR_SHOW_FMT(_prop, _attrname, _fmt, _val) \ > + static ssize_t _attrname##_##_prop##_show( \ > + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \ > + { \ > + return sysfs_emit(buf, _fmt, _val); \ > + } \ > + static struct kobj_attribute attr_##_attrname##_##_prop = \ > + __ASUS_ATTR_RO(_attrname, _prop) > + > +/* Boolean style enumeration, base macro. Requires adding show/store */ > +#define __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) \ > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ > + __ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible); \ > + static struct kobj_attribute attr_##_attrname##_type = \ > + __ASUS_ATTR_RO_AS(type, enum_type_show); \ > + static struct attribute *_attrname##_attrs[] = { \ > + &attr_##_attrname##_current_value.attr, \ > + &attr_##_attrname##_display_name.attr, \ > + &attr_##_attrname##_possible_values.attr, \ > + &attr_##_attrname##_type.attr, \ > + NULL \ > + }; \ > + static const struct attribute_group _attrname##_attr_group = { \ > + .name = _fsname, .attrs = _attrname##_attrs \ > + } > + > +#define ATTR_GROUP_BOOL_RO(_attrname, _fsname, _wmi, _dispname) \ > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > + > +#define ATTR_GROUP_BOOL_RW(_attrname, _fsname, _wmi, _dispname) \ > + __ATTR_CURRENT_INT_RW(_attrname, 0, 1, _wmi); \ > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > + > +/* > + * Requires <name>_current_value_show(), <name>_current_value_show() > + */ > +#define ATTR_GROUP_BOOL_CUSTOM(_attrname, _fsname, _dispname) \ > + static struct kobj_attribute attr_##_attrname##_current_value = \ > + __ASUS_ATTR_RW(_attrname, current_value); \ > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > + > +#define ATTR_GROUP_ENUM_INT_RO(_attrname, _fsname, _wmi, _possible, _dispname) \ > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ > + __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) > + > +/* > + * Requires <name>_current_value_show(), <name>_current_value_show() > + * and <name>_possible_values_show() > + */ > +#define ATTR_GROUP_ENUM_CUSTOM(_attrname, _fsname, _dispname) \ > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ > + static struct kobj_attribute attr_##_attrname##_current_value = \ > + __ASUS_ATTR_RW(_attrname, current_value); \ > + static struct kobj_attribute attr_##_attrname##_possible_values = \ > + __ASUS_ATTR_RO(_attrname, possible_values); \ > + static struct kobj_attribute attr_##_attrname##_type = \ > + __ASUS_ATTR_RO_AS(type, enum_type_show); \ > + static struct attribute *_attrname##_attrs[] = { \ > + &attr_##_attrname##_current_value.attr, \ > + &attr_##_attrname##_display_name.attr, \ > + &attr_##_attrname##_possible_values.attr, \ > + &attr_##_attrname##_type.attr, \ > + NULL \ > + }; \ > + static const struct attribute_group _attrname##_attr_group = { \ > + .name = _fsname, .attrs = _attrname##_attrs \ > + } > + > +#endif /* _ASUS_BIOSCFG_H_ */
… > +++ b/drivers/platform/x86/asus-armoury.h > @@ -0,0 +1,146 @@ … > +#ifndef _ASUS_BIOSCFG_H_ > +#define _ASUS_BIOSCFG_H_ … I suggest to omit leading underscores from such identifiers. https://wiki.sei.cmu.edu/confluence/display/c/DCL37-C.+Do+not+declare+or+define+a+reserved+identifier Regards, Markus
On Fri, 27 Sep 2024, at 7:10 AM, Markus Elfring wrote: > … > > +++ b/drivers/platform/x86/asus-armoury.h > > @@ -0,0 +1,146 @@ > … > > +#ifndef _ASUS_BIOSCFG_H_ > > +#define _ASUS_BIOSCFG_H_ > … > > I suggest to omit leading underscores from such identifiers. > https://wiki.sei.cmu.edu/confluence/display/c/DCL37-C.+Do+not+declare+or+define+a+reserved+identifier Hi Markus, the link is C standard, not kernel C right? Pretty much everything I look at in the kernel seems to use the leading underscores. Regards, Luke.
Very sorry. Another resend. This was *meant* to be in plain text sent as html for some reason. On Fri, 27 Sep 2024, at 3:48 AM, Mario Limonciello wrote: > On 9/26/2024 04:29, Luke D. Jones wrote: > > The fw_attributes_class provides a much cleaner interface to all of the > > attributes introduced to asus-wmi. This patch moves all of these extra > > No need to say "this patch". Ack > > attributes over to fw_attributes_class, and shifts the bulk of these > > definitions to a new kernel module to reduce the clutter of asus-wmi > > with the intention of deprecating the asus-wmi attributes in future. > > > > The work applies only to WMI methods which don't have a clearly defined > > place within the sysfs and as a result ended up lumped together in > > /sys/devices/platform/asus-nb-wmi/ with no standard API. > > > > Where possible the fw attrs now implement defaults, min, max, scalar, > > choices, etc. As en example dgpu_disable becomes: > > > > /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/ > > ├── current_value > > ├── display_name > > ├── possible_values > > └── type > > > > as do other attributes. > > > > The ppt_* based attributes are removed in this initial patch as the > > implementation is somewhat broken due to the WMI methods requiring a > > set of limits on the values accepted (which is not provided by WMI). > > > > Signed-off-by: Luke D. Jones <luke@ljones.dev> > > --- > > drivers/platform/x86/Kconfig | 13 + > > drivers/platform/x86/Makefile | 1 + > > drivers/platform/x86/asus-armoury.c | 563 ++++++++++++++++++++++++++++ > > drivers/platform/x86/asus-armoury.h | 146 ++++++++ > > 4 files changed, 723 insertions(+) > > create mode 100644 drivers/platform/x86/asus-armoury.c > > create mode 100644 drivers/platform/x86/asus-armoury.h > > > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > > index 3875abba5a79..dedf66e0d099 100644 > > --- a/drivers/platform/x86/Kconfig > > +++ b/drivers/platform/x86/Kconfig > > @@ -265,6 +265,19 @@ config ASUS_WIRELESS > > If you choose to compile this driver as a module the module will be > > called asus-wireless. > > > > +config ASUS_ARMOURY > > + tristate "ASUS Armoury driver" > > + depends on ACPI_WMI > > I don't think you need to depend on ACPI_WMI directly because ASUS_WMI > also depends on it. Ack > > + depends on ASUS_WMI > > + select FW_ATTR_CLASS > > + help > > + Say Y here if you have a WMI aware Asus machine and would like to use the > > + firmware_attributes API to control various settings typically exposed in > > + the ASUS Armoury Crate application available on Windows. > > + > > + To compile this driver as a module, choose M here: the module will > > + be called asus-armoury. > > + > > config ASUS_WMI > > tristate "ASUS WMI Driver" > > depends on ACPI_WMI > > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > > index e1b142947067..fe3e7e7dede8 100644 > > --- a/drivers/platform/x86/Makefile > > +++ b/drivers/platform/x86/Makefile > > @@ -32,6 +32,7 @@ obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o > > # ASUS > > obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o > > obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o > > +obj-$(CONFIG_ASUS_ARMOURY) += asus-armoury.o > > obj-$(CONFIG_ASUS_WMI) += asus-wmi.o > > obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o > > obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o > > diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c > > new file mode 100644 > > index 000000000000..39e422b16b8e > > --- /dev/null > > +++ b/drivers/platform/x86/asus-armoury.c > > @@ -0,0 +1,563 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* > > + * Asus Armoury (WMI) attributes driver. This driver uses the fw_attributes > > + * class to expose the various WMI functions that many gaming and some > > + * non-gaming ASUS laptops have available. > > + * These typically don't fit anywhere else in the sysfs such as under LED class, > > + * hwmon or other, and are set in Windows using the ASUS Armoury Crate tool. > > + * > > + * Copyright(C) 2010 Intel Corporation. > > + * Copyright(C) 2024-2024 Luke Jones <luke@ljones.dev> > > + */ > > + > > +#include <linux/bitfield.h> > > +#include <linux/device.h> > > +#include <linux/dmi.h> > > +#include <linux/errno.h> > > +#include <linux/fs.h> > > +#include <linux/kernel.h> > > +#include <linux/kmod.h> > > +#include <linux/kobject.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/platform_data/x86/asus-wmi.h> > > +#include <linux/types.h> > > + > > +#include "asus-armoury.h" > > +#include "firmware_attributes_class.h" > > +#include "asus-wmi.h" > > + > > +#define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C" > > + > > +#define ASUS_MINI_LED_MODE_MASK 0x03 > > +/* Standard modes for devices with only on/off */ > > +#define ASUS_MINI_LED_OFF 0x00 > > +#define ASUS_MINI_LED_ON 0x01 > > +/* Like "on" but the effect is more vibrant or brighter */ > > +#define ASUS_MINI_LED_STRONG_MODE 0x02 > > +/* New modes for devices with 3 mini-led mode types */ > > +#define ASUS_MINI_LED_2024_WEAK 0x00 > > +#define ASUS_MINI_LED_2024_STRONG 0x01 > > +#define ASUS_MINI_LED_2024_OFF 0x02 > > + > > +/* Default limits for tunables available on ASUS ROG laptops */ > > +#define PPT_CPU_LIMIT_MIN 5 > > +#define PPT_CPU_LIMIT_MAX 150 > > +#define PPT_CPU_LIMIT_DEFAULT 80 > > +#define PPT_PLATFORM_MIN 5 > > +#define PPT_PLATFORM_MAX 100 > > +#define PPT_PLATFORM_DEFAULT 80 > > +#define NVIDIA_BOOST_MIN 5 > > +#define NVIDIA_BOOST_MAX 25 > > +#define NVIDIA_TEMP_MIN 75 > > +#define NVIDIA_TEMP_MAX 87 > > Purely for alphabetical order purposes shouldn't NVIDIA_* come before PPT*? I guess :) > Also can you leave a comment where these default limits come from? Ack > > + > > +static const struct class *fw_attr_class; > > + > > +struct asus_armoury_priv { > > + struct device *fw_attr_dev; > > + struct kset *fw_attr_kset; > > + > > + u32 mini_led_dev_id; > > + u32 gpu_mux_dev_id; > > + > > + struct mutex mutex; > > +}; > > + > > +static struct asus_armoury_priv asus_armoury = { .mutex = __MUTEX_INITIALIZER( > > + asus_armoury.mutex) }; > > + > > +struct fw_attrs_group { > > + bool pending_reboot; > > +}; > > + > > +static struct fw_attrs_group fw_attrs = { > > + .pending_reboot = false, > > +}; > > + > > +struct asus_attr_group { > > + const struct attribute_group *attr_group; > > + u32 wmi_devid; > > +}; > > + > > +static bool asus_wmi_is_present(u32 dev_id) > > +{ > > + u32 retval; > > + int status; > > + > > + status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, &retval); > > + pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval); > > + > > + return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT); > > It seems like you're hiding the potential ACPI failures which could make > this a bit harder to debug in the future. What do you think about doing > it like this: > > u32 ret; > > if (!asus_wmi_evaluate_method()) { > pr_debug("acpi_wmi_evaluate_method failed\n"); > return false; > } > > return ret & ASUS_WMI_DSDTS_PRESENCE_BIT; > > > +} > > + > > +static void asus_set_reboot_and_signal_event(void) > > +{ > > + fw_attrs.pending_reboot = true; > > + kobject_uevent(&asus_armoury.fw_attr_dev->kobj, KOBJ_CHANGE); > > +} > > + > > +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) > > +{ > > + return sysfs_emit(buf, "%d\n", fw_attrs.pending_reboot); > > +} > > + > > +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot); > > + > > +static bool asus_bios_requires_reboot(struct kobj_attribute *attr) > > +{ > > + return !strcmp(attr->attr.name, "gpu_mux_mode"); > > +} > > + > > +/** > > + * attr_int_store() - Generic store function for use with most WMI functions. > > + * @kobj: Pointer to the driver object. > > + * @kobj_attribute: Pointer to the attribute calling this function. > > + * @buf: The buffer to read from, this is parsed to `int` type. > > + * @count: > > Missing a description here. Ack > > > + * @min: Minimum accepted value. Below this returns -EINVAL. > > + * @max: Maximum accepted value. Above this returns -EINVAL. > > + * @store_value: Pointer to where the parsed value should be stored. > > + * @wmi_dev: The WMI function ID to use. > > + * > > + * The WMI functions available on most ASUS laptops return a 1 as "success", and > > + * a 0 as failed. However some functions can return n > 1 for additional errors. > > + * attr_int_store() currently treats all values which are not 1 as errors, ignoring > > IMO; Don't refer to function() in the description. Ack > > > + * the possible differences in WMI error returns. > > + * > > + * Returns: Either count, or an error. > > + */ > > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, > > + size_t count, u32 min, u32 max, u32 *store_value, u32 wmi_dev) > > +{ > > + u32 result, value; > > + int err; > > + > > + err = kstrtouint(buf, 10, &value); > > + if (err) > > + return err; > > + > > + if (value < min || value > max) > > + return -EINVAL; > > + > > + err = asus_wmi_set_devstate(wmi_dev, value, &result); > > + if (err) { > > + pr_err("Failed to set %s: %d\n", attr->attr.name, err); > > + return err; > > + } > > + > > + if (result != 1) { > > + pr_err("Failed to set %s (result): 0x%x\n", attr->attr.name, result); > > + return -EIO; > > + } > > + > > + if (store_value != NULL) > > + *store_value = value; > > + sysfs_notify(kobj, NULL, attr->attr.name); > > + > > + if (asus_bios_requires_reboot(attr)) > > + asus_set_reboot_and_signal_event(); > > + > > + return count; > > +} > > + > > +/* Mini-LED mode **************************************************************/ > > +static ssize_t mini_led_mode_current_value_show(struct kobject *kobj, > > + struct kobj_attribute *attr, char *buf) > > +{ > > + u32 value; > > + int err; > > + > > + err = asus_wmi_get_devstate_dsts(asus_armoury.mini_led_dev_id, &value); > > + if (err) > > + return err; > > + > > + value &= ASUS_MINI_LED_MODE_MASK; > > + > > + /* > > + * Remap the mode values to match previous generation mini-LED. The last gen > > + * WMI 0 == off, while on this version WMI 2 == off (flipped). > > + */ > > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { > > + switch (value) { > > + case ASUS_MINI_LED_2024_WEAK: > > + value = ASUS_MINI_LED_ON; > > + break; > > + case ASUS_MINI_LED_2024_STRONG: > > + value = ASUS_MINI_LED_STRONG_MODE; > > + break; > > + case ASUS_MINI_LED_2024_OFF: > > + value = ASUS_MINI_LED_OFF; > > + break; > > + } > > + } > > + > > + return sysfs_emit(buf, "%u\n", value); > > +} > > + > > +static ssize_t mini_led_mode_current_value_store(struct kobject *kobj, > > + struct kobj_attribute *attr, const char *buf, > > + size_t count) > > +{ > > + int result, err; > > + u32 mode; > > + > > + err = kstrtou32(buf, 10, &mode); > > + if (err) > > + return err; > > + > > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE && > > + mode > ASUS_MINI_LED_ON) > > + return -EINVAL; > > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 && > > + mode > ASUS_MINI_LED_STRONG_MODE) > > + return -EINVAL; > > + > > + /* > > + * Remap the mode values so expected behaviour is the same as the last > > + * generation of mini-LED with 0 == off, 1 == on. > > + */ > > + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { > > + switch (mode) { > > + case ASUS_MINI_LED_OFF: > > + mode = ASUS_MINI_LED_2024_OFF; > > + break; > > + case ASUS_MINI_LED_ON: > > + mode = ASUS_MINI_LED_2024_WEAK; > > + break; > > + case ASUS_MINI_LED_STRONG_MODE: > > + mode = ASUS_MINI_LED_2024_STRONG; > > + break; > > + } > > + } > > + > > + err = asus_wmi_set_devstate(asus_armoury.mini_led_dev_id, mode, &result); > > + if (err) { > > + pr_warn("Failed to set mini-LED: %d\n", err); > > + return err; > > + } > > + > > + if (result != 1) { > > + pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result); > > + return -EIO; > > + } > > + > > + sysfs_notify(kobj, NULL, attr->attr.name); > > + > > + return count; > > +} > > + > > +static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj, > > + struct kobj_attribute *attr, char *buf) > > +{ > > + switch (asus_armoury.mini_led_dev_id) { > > + case ASUS_WMI_DEVID_MINI_LED_MODE: > > + return sysfs_emit(buf, "0;1\n"); > > + case ASUS_WMI_DEVID_MINI_LED_MODE2: > > + return sysfs_emit(buf, "0;1;2\n"); > > + } > > + > > + return sysfs_emit(buf, "0\n"); > > +} > > + > > +ATTR_GROUP_ENUM_CUSTOM(mini_led_mode, "mini_led_mode", "Set the mini-LED backlight mode"); > > + > > +static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj, > > + struct kobj_attribute *attr, const char *buf, > > + size_t count) > > +{ > > + int result, err; > > + u32 optimus; > > + > > + err = kstrtou32(buf, 10, &optimus); > > + if (err) > > + return err; > > + > > + if (optimus > 1) > > + return -EINVAL; > > + > > + if (asus_wmi_is_present(ASUS_WMI_DEVID_DGPU)) { > > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_DGPU, &result); > > + if (err) > > + return err; > > + if (result && !optimus) { > > + err = -ENODEV; > > + pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %02X %02X %d\n", > > + result, optimus, err); > > + return err; > > + } > > + } > > + > > + if (asus_wmi_is_present(ASUS_WMI_DEVID_EGPU)) { > > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU, &result); > > + if (err) > > + return err; > > + if (result && !optimus) { > > + err = -ENODEV; > > + pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n", > > + err); > > + return err; > > + } > > + } > > + > > + err = asus_wmi_set_devstate(asus_armoury.gpu_mux_dev_id, optimus, &result); > > + if (err) { > > + pr_err("Failed to set GPU MUX mode: %d\n", err); > > + return err; > > + } > > + /* !1 is considered a fail by ASUS */ > > + if (result != 1) { > > + pr_warn("Failed to set GPU MUX mode (result): 0x%x\n", result); > > + return -EIO; > > + } > > + > > + sysfs_notify(kobj, NULL, attr->attr.name); > > + asus_set_reboot_and_signal_event(); > > + > > + return count; > > +} > > +WMI_SHOW_INT(gpu_mux_mode_current_value, "%d\n", asus_armoury.gpu_mux_dev_id); > > +ATTR_GROUP_BOOL_CUSTOM(gpu_mux_mode, "gpu_mux_mode", "Set the GPU display MUX mode"); > > + > > +/* > > + * A user may be required to store the value twice, typical store first, then > > + * rescan PCI bus to activate power, then store a second time to save correctly. > > + * The reason for this is that an extra code path in the ACPI is enabled when > > + * the device and bus are powered. > > + */ > > +static ssize_t dgpu_disable_current_value_store(struct kobject *kobj, > > + struct kobj_attribute *attr, const char *buf, > > + size_t count) > > +{ > > + int result, err; > > + u32 disable; > > + > > + err = kstrtou32(buf, 10, &disable); > > + if (err) > > + return err; > > + > > + if (disable > 1) > > + return -EINVAL; > > + > > + if (asus_armoury.gpu_mux_dev_id) { > > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); > > + if (err) > > + return err; > > + if (!result && disable) { > > + err = -ENODEV; > > + pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err); > > + return err; > > + } > > + } > > + > > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, disable, &result); > > + if (err) { > > + pr_warn("Failed to set dGPU disable: %d\n", err); > > + return err; > > + } > > + > > + if (result != 1) { > > + pr_warn("Failed to set dGPU disable (result): 0x%x\n", result); > > + return -EIO; > > + } > > + > > + sysfs_notify(kobj, NULL, attr->attr.name); > > + > > + return count; > > +} > > +WMI_SHOW_INT(dgpu_disable_current_value, "%d\n", ASUS_WMI_DEVID_DGPU); > > +ATTR_GROUP_BOOL_CUSTOM(dgpu_disable, "dgpu_disable", "Disable the dGPU"); > > + > > +/* The ACPI call to enable the eGPU also disables the internal dGPU */ > > +static ssize_t egpu_enable_current_value_store(struct kobject *kobj, struct kobj_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + int result, err; > > + u32 enable; > > + > > + err = kstrtou32(buf, 10, &enable); > > + if (err) > > + return err; > > + > > + if (enable > 1) > > + return -EINVAL; > > + > > + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU_CONNECTED, &result); > > + if (err) { > > + pr_warn("Failed to get eGPU connection status: %d\n", err); > > + return err; > > + } > > + > > + if (asus_armoury.gpu_mux_dev_id) { > > + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); > > + if (err) { > > + pr_warn("Failed to get GPU MUX status: %d\n", result); > > + return result; > > + } > > + if (!result && enable) { > > + err = -ENODEV; > > + pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err); > > + return err; > > + } > > + } > > + > > + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, enable, &result); > > + if (err) { > > + pr_warn("Failed to set eGPU state: %d\n", err); > > + return err; > > + } > > + > > + if (result != 1) { > > + pr_warn("Failed to set eGPU state (retval): 0x%x\n", result); > > + return -EIO; > > + } > > + > > + sysfs_notify(kobj, NULL, attr->attr.name); > > + > > + return count; > > +} > > +WMI_SHOW_INT(egpu_enable_current_value, "%d\n", ASUS_WMI_DEVID_EGPU); > > +ATTR_GROUP_BOOL_CUSTOM(egpu_enable, "egpu_enable", "Enable the eGPU (also disables dGPU)"); > > + > > +/* Simple attribute creation */ > > +ATTR_GROUP_ENUM_INT_RO(charge_mode, "charge_mode", ASUS_WMI_DEVID_CHARGE_MODE, "0;1;2", > > + "Show the current mode of charging"); > > + > > +ATTR_GROUP_BOOL_RW(boot_sound, "boot_sound", ASUS_WMI_DEVID_BOOT_SOUND, > > + "Set the boot POST sound"); > > +ATTR_GROUP_BOOL_RW(mcu_powersave, "mcu_powersave", ASUS_WMI_DEVID_MCU_POWERSAVE, > > + "Set MCU powersaving mode"); > > +ATTR_GROUP_BOOL_RW(panel_od, "panel_overdrive", ASUS_WMI_DEVID_PANEL_OD, > > + "Set the panel refresh overdrive"); > > +ATTR_GROUP_BOOL_RO(egpu_connected, "egpu_connected", ASUS_WMI_DEVID_EGPU_CONNECTED, > > + "Show the eGPU connection status"); > > + > > +/* If an attribute does not require any special case handling add it here */ > > +static const struct asus_attr_group armoury_attr_groups[] = { > > + { &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED }, > > + { &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU }, > > + { &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU }, > > + > > + { &charge_mode_attr_group, ASUS_WMI_DEVID_CHARGE_MODE }, > > + { &boot_sound_attr_group, ASUS_WMI_DEVID_BOOT_SOUND }, > > + { &mcu_powersave_attr_group, ASUS_WMI_DEVID_MCU_POWERSAVE }, > > + { &panel_od_attr_group, ASUS_WMI_DEVID_PANEL_OD }, > > +}; > > + > > +static int asus_fw_attr_add(void) > > +{ > > + int err; > > + > > + err = fw_attributes_class_get(&fw_attr_class); > > + if (err) > > + goto fail_class_created; > > Is that right? If you fail to get the class shouldn't you just return > an error code? Indeed. I think I misread what i was referring to when I was learning how to use this. Changed. > > > + > > + asus_armoury.fw_attr_dev = > > + device_create(fw_attr_class, NULL, MKDEV(0, 0), NULL, "%s", DRIVER_NAME); > > + > > + if (IS_ERR(asus_armoury.fw_attr_dev)) { > > + err = PTR_ERR(asus_armoury.fw_attr_dev); > > + goto fail_class_created; > > + } > > + > > + asus_armoury.fw_attr_kset = > > + kset_create_and_add("attributes", NULL, &asus_armoury.fw_attr_dev->kobj); > > + if (!asus_armoury.fw_attr_dev) { > > + err = -ENOMEM; > > + pr_debug("Failed to create and add attributes\n"); > > + goto err_destroy_classdev; > > + } > > + > > + err = sysfs_create_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); > > + if (err) { > > + pr_warn("Failed to create sysfs level attributes\n"); > > + goto fail_class_created; > > + } > > + > > + err = 0; > This seems unnecessary. I think my logic was I wasn't sure if the following body would set it. So be safe? But then if the previous code succeeeds then this shouldn't be set anyway :) Removed in both locations. > > > + asus_armoury.mini_led_dev_id = 0; > > + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) { > > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; > > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > > + &mini_led_mode_attr_group); > > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) { > > + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; > > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > > + &mini_led_mode_attr_group); > > + } > > + if (err) > > + pr_warn("Failed to create sysfs-group for mini_led\n"); > > Shouldn't you fail and clean up here? Honestly not sure. It's only a failed WMI call, and the group doesn't get created for that fail, the others might be fine. I'll defer to your advice on that. > > + > > + err = 0; > > Assuming you follow my above comment this is unnecessary. Ack > > > + asus_armoury.gpu_mux_dev_id = 0; > > + if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX)) { > > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX; > > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > > + &gpu_mux_mode_attr_group); > > + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX_VIVO)) { > > + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX_VIVO; > > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > > + &gpu_mux_mode_attr_group); > > + } > > + if (err) > > + pr_warn("Failed to create sysfs-group for gpu_mux\n"); > > Shouldn't you fail and clean up here? Same as comment above the above > > + > > + for (int i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) { > > + if (!asus_wmi_is_present(armoury_attr_groups[i].wmi_devid)) > > + continue; > > + > > + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, > > + armoury_attr_groups[i].attr_group); > > + if (err) > > + pr_warn("Failed to create sysfs-group for %s\n", > > + armoury_attr_groups[i].attr_group->name); > > Shouldn't you fail and clean up here? > > > + else > > + pr_debug("Created sysfs-group for %s\n", > > + armoury_attr_groups[i].attr_group->name); > > + } > > + > > + return 0; > > + > > +err_destroy_classdev: > > + device_destroy(fw_attr_class, MKDEV(0, 0)); > > + > > +fail_class_created: > > + fw_attributes_class_put(); > > + return err; > > +} > > + > > +/* Init / exit ****************************************************************/ > > + > > +static int __init asus_fw_init(void) > > +{ > > + int err; > > + > > + fw_attrs.pending_reboot = false; > > Isn't it already initialized to false? Rust makes me cautious :D. Removed. > > > + > > + err = asus_fw_attr_add(); > > + if (err) > > + return err; > > + > > + return 0; > > +} > > + > > +static void __exit asus_fw_exit(void) > > +{ > > + mutex_lock(&asus_armoury.mutex); > > I think you should be using this mutex more. For example what if an > attribute is being written while the module is unloaded? Good point. I'll adjust code to suit. However if I do, this will trickle through the other patches I've added your review tag to. Will this be okay? > > > + > > + sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); > > + kset_unregister(asus_armoury.fw_attr_kset); > > + device_destroy(fw_attr_class, MKDEV(0, 0)); > > + fw_attributes_class_put(); > > + > > + mutex_unlock(&asus_armoury.mutex); > > +} > > + > > +module_init(asus_fw_init); > > +module_exit(asus_fw_exit); > > + > > +MODULE_IMPORT_NS(ASUS_WMI); > > +MODULE_AUTHOR("Luke Jones <luke@ljones.dev>"); > > +MODULE_DESCRIPTION("ASUS BIOS Configuration Driver"); > > +MODULE_LICENSE("GPL"); > > +MODULE_ALIAS("wmi:" ASUS_NB_WMI_EVENT_GUID); > > diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h > > new file mode 100644 > > index 000000000000..b99fd136abf1 > > --- /dev/null > > +++ b/drivers/platform/x86/asus-armoury.h > > @@ -0,0 +1,146 @@ > > +/* SPDX-License-Identifier: GPL-2.0 > > + * > > + * Definitions for kernel modules using asus-armoury driver > > + * > > + * Copyright (c) 2024 Luke Jones <luke@ljones.dev> > > + */ > > + > > +#ifndef _ASUS_BIOSCFG_H_ > > +#define _ASUS_BIOSCFG_H_ > > + > > +#include <linux/types.h> > > +#include <linux/platform_device.h> > > + > > +#define DRIVER_NAME "asus-armoury" > > + > > +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, > > + const char *buf, size_t count, u32 min, u32 max, > > + u32 *store_value, u32 wmi_dev); > > + > > +static ssize_t enum_type_show(struct kobject *kobj, struct kobj_attribute *attr, > > + char *buf) > > +{ > > + return sysfs_emit(buf, "enumeration\n"); > > +} > > + > > +#define __ASUS_ATTR_RO(_func, _name) \ > > + { \ > > + .attr = { .name = __stringify(_name), .mode = 0444 }, \ > > + .show = _func##_##_name##_show, \ > > + } > > + > > +#define __ASUS_ATTR_RO_AS(_name, _show) \ > > + { \ > > + .attr = { .name = __stringify(_name), .mode = 0444 }, \ > > + .show = _show, \ > > + } > > + > > +#define __ASUS_ATTR_RW(_func, _name) \ > > + __ATTR(_name, 0644, _func##_##_name##_show, _func##_##_name##_store) > > + > > +#define __WMI_STORE_INT(_attr, _min, _max, _wmi) \ > > + static ssize_t _attr##_store(struct kobject *kobj, \ > > + struct kobj_attribute *attr, \ > > + const char *buf, size_t count) \ > > + { \ > > + return attr_int_store(kobj, attr, buf, count, _min, _max, \ > > + NULL, _wmi); \ > > + } > > + > > +#define WMI_SHOW_INT(_attr, _fmt, _wmi) \ > > + static ssize_t _attr##_show(struct kobject *kobj, \ > > + struct kobj_attribute *attr, char *buf) \ > > + { \ > > + u32 result; \ > > + int err; \ > > + err = asus_wmi_get_devstate_dsts(_wmi, &result); \ > > + if (err) \ > > + return err; \ > > + return sysfs_emit(buf, _fmt, \ > > + result & ~ASUS_WMI_DSTS_PRESENCE_BIT); \ > > + } > > + > > +/* Create functions and attributes for use in other macros or on their own */ > > + > > +#define __ATTR_CURRENT_INT_RO(_attr, _wmi) \ > > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ > > + static struct kobj_attribute attr_##_attr##_current_value = \ > > + __ASUS_ATTR_RO(_attr, current_value) > > + > > +#define __ATTR_CURRENT_INT_RW(_attr, _minv, _maxv, _wmi) \ > > + __WMI_STORE_INT(_attr##_current_value, _minv, _maxv, _wmi); \ > > + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ > > + static struct kobj_attribute attr_##_attr##_current_value = \ > > + __ASUS_ATTR_RW(_attr, current_value) > > + > > +/* Shows a formatted static variable */ > > +#define __ATTR_SHOW_FMT(_prop, _attrname, _fmt, _val) \ > > + static ssize_t _attrname##_##_prop##_show( \ > > + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \ > > + { \ > > + return sysfs_emit(buf, _fmt, _val); \ > > + } \ > > + static struct kobj_attribute attr_##_attrname##_##_prop = \ > > + __ASUS_ATTR_RO(_attrname, _prop) > > + > > +/* Boolean style enumeration, base macro. Requires adding show/store */ > > +#define __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) \ > > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ > > + __ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible); \ > > + static struct kobj_attribute attr_##_attrname##_type = \ > > + __ASUS_ATTR_RO_AS(type, enum_type_show); \ > > + static struct attribute *_attrname##_attrs[] = { \ > > + &attr_##_attrname##_current_value.attr, \ > > + &attr_##_attrname##_display_name.attr, \ > > + &attr_##_attrname##_possible_values.attr, \ > > + &attr_##_attrname##_type.attr, \ > > + NULL \ > > + }; \ > > + static const struct attribute_group _attrname##_attr_group = { \ > > + .name = _fsname, .attrs = _attrname##_attrs \ > > + } > > + > > +#define ATTR_GROUP_BOOL_RO(_attrname, _fsname, _wmi, _dispname) \ > > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ > > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > > + > > +#define ATTR_GROUP_BOOL_RW(_attrname, _fsname, _wmi, _dispname) \ > > + __ATTR_CURRENT_INT_RW(_attrname, 0, 1, _wmi); \ > > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > > + > > +/* > > + * Requires <name>_current_value_show(), <name>_current_value_show() > > + */ > > +#define ATTR_GROUP_BOOL_CUSTOM(_attrname, _fsname, _dispname) \ > > + static struct kobj_attribute attr_##_attrname##_current_value = \ > > + __ASUS_ATTR_RW(_attrname, current_value); \ > > + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) > > + > > +#define ATTR_GROUP_ENUM_INT_RO(_attrname, _fsname, _wmi, _possible, _dispname) \ > > + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ > > + __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) > > + > > +/* > > + * Requires <name>_current_value_show(), <name>_current_value_show() > > + * and <name>_possible_values_show() > > + */ > > +#define ATTR_GROUP_ENUM_CUSTOM(_attrname, _fsname, _dispname) \ > > + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ > > + static struct kobj_attribute attr_##_attrname##_current_value = \ > > + __ASUS_ATTR_RW(_attrname, current_value); \ > > + static struct kobj_attribute attr_##_attrname##_possible_values = \ > > + __ASUS_ATTR_RO(_attrname, possible_values); \ > > + static struct kobj_attribute attr_##_attrname##_type = \ > > + __ASUS_ATTR_RO_AS(type, enum_type_show); \ > > + static struct attribute *_attrname##_attrs[] = { \ > > + &attr_##_attrname##_current_value.attr, \ > > + &attr_##_attrname##_display_name.attr, \ > > + &attr_##_attrname##_possible_values.attr, \ > > + &attr_##_attrname##_type.attr, \ > > + NULL \ > > + }; \ > > + static const struct attribute_group _attrname##_attr_group = { \ > > + .name = _fsname, .attrs = _attrname##_attrs \ > > + } > > + > > +#endif /* _ASUS_BIOSCFG_H_ */ > >
>> … >>> +++ b/drivers/platform/x86/asus-armoury.h >>> @@ -0,0 +1,146 @@ >> … >>> +#ifndef _ASUS_BIOSCFG_H_ >>> +#define _ASUS_BIOSCFG_H_ >> … >> >> I suggest to omit leading underscores from such identifiers. >> https://wiki.sei.cmu.edu/confluence/display/c/DCL37-C.+Do+not+declare+or+define+a+reserved+identifier … > the link is C standard, not kernel C right? Advice is offered in such a direction. > Pretty much everything I look at in the kernel seems to use the leading underscores. How much would you like to care for standard compliance concerns together with your software developments? Regards, Markus
html a third time... I think I need to do something about that. Very very sorry. On Fri, 27 Sep 2024, at 6:09 PM, Markus Elfring wrote: > >> … > >>> +++ b/drivers/platform/x86/asus-armoury.h > >>> @@ -0,0 +1,146 @@ > >> … > >>> +#ifndef _ASUS_BIOSCFG_H_ > >>> +#define _ASUS_BIOSCFG_H_ > >> … > >> > >> I suggest to omit leading underscores from such identifiers. > >> https://wiki.sei.cmu.edu/confluence/display/c/DCL37-C.+Do+not+declare+or+define+a+reserved+identifier > … > > the link is C standard, not kernel C right? > > Advice is offered in such a direction. > > > > Pretty much everything I look at in the kernel seems to use the leading underscores. > > How much would you like to care for standard compliance concerns > together with your software developments? I only ask about because it seems to deviate from everything else I've viewed. For example the older `asus-wmi.h` has: #ifndef _ASUS_WMI_H_ #define _ASUS_WMI_H_ and every other header in the drivers/platform/x86 dir is similar. If what I'm supposed to is omit the leading `_` then sure I'll do it, it's not of any consequence to me. But the difference gave me pause is all :) Kind regards, Luke. > Regards, > Markus >
>> How much would you like to care for standard compliance concerns >> together with your software developments? > > I only ask about because it seems to deviate from everything else I've viewed. For example the older `asus-wmi.h` has: > > #ifndef _ASUS_WMI_H_ > #define _ASUS_WMI_H_ Such a naming approach is “popular”, isn't it? > and every other header in the drivers/platform/x86 dir is similar. If what I'm supposed to is omit the leading `_` then sure I'll do it, it's not of any consequence to me. I dare to propose possibilities to take safer identifier selections better into account. I hope that we can benefit more from corresponding collateral evolution. Regards, Markus
On Fri, 27 Sep 2024, at 7:24 PM, Markus Elfring wrote: >>> How much would you like to care for standard compliance concerns >>> together with your software developments? >> >> I only ask about because it seems to deviate from everything else I've viewed. For example the older `asus-wmi.h` has: >> >> #ifndef _ASUS_WMI_H_ >> #define _ASUS_WMI_H_ > > Such a naming approach is “popular”, isn't it? > > >> and every other header in the drivers/platform/x86 dir is similar. If what I'm supposed to is omit the leading `_` then sure I'll do it, it's not of any consequence to me. > > I dare to propose possibilities to take safer identifier selections > better into account. > I hope that we can benefit more from corresponding collateral evolution. My sincerest apologies if I missed something in my tone when trying to convey might thoughts - for some things I am still learning in regards to C (I am mostly rust) and the difference was a curious thing to me. The code is now updated to match your suggestion. > Regards, > Markus
On Fri, 27 Sep 2024, Luke Jones wrote: > On Fri, 27 Sep 2024, at 7:24 PM, Markus Elfring wrote: > >>> How much would you like to care for standard compliance concerns > >>> together with your software developments? > >> > >> I only ask about because it seems to deviate from everything else I've viewed. For example the older `asus-wmi.h` has: > >> > >> #ifndef _ASUS_WMI_H_ > >> #define _ASUS_WMI_H_ > > > > Such a naming approach is “popular”, isn't it? > > > > > >> and every other header in the drivers/platform/x86 dir is similar. If what I'm supposed to is omit the leading `_` then sure I'll do it, it's not of any consequence to me. > > > > I dare to propose possibilities to take safer identifier selections > > better into account. > > I hope that we can benefit more from corresponding collateral evolution. > > My sincerest apologies if I missed something in my tone when trying to convey might thoughts - for some things I am still learning in regards to C (I am mostly rust) and the difference was a curious thing to me. > > The code is now updated to match your suggestion. Markus is not an authority on Linux kernel codeing style, rather a collector of random suggestions about C code that he would like to impose on the Linux kernel. So if you consider that his suggestion is not appropriate in a Linux kernel context, please disregard it. julia > > > Regards, > > Markus > >
On 9/26/2024 18:20, Luke Jones wrote: >>> + asus_armoury.mini_led_dev_id = 0; >>> + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) { >>> + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; >>> + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, >>> + &mini_led_mode_attr_group); >>> + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) { >>> + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; >>> + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, >>> + &mini_led_mode_attr_group); >>> + } >>> + if (err) >>> + pr_warn("Failed to create sysfs-group for mini_led\n"); >> >> Shouldn't you fail and clean up here? > > Honestly not sure. It's only a failed WMI call, and the group doesn't get created for that fail, the others might be fine. I'll defer to your advice on that. It comes down to whether failures are expected on some machines or not in practice. If a machine will fail to create groups, then yeah you should allow skipping. If it doesn't then I feel you have a much more logical cleanup and support strategy if you unwind on any failure. Hans or Ilpo might have some thoughts here too. >> I think you should be using this mutex more. For example what if an >> attribute is being written while the module is unloaded? > > Good point. I'll adjust code to suit. However if I do, this will trickle through the other patches I've added your review tag to. Will this be okay? > >> If they change in a material way drop my tag and I can just re-review.
On Sat, 28 Sep 2024, at 2:45 AM, Mario Limonciello wrote: > On 9/26/2024 18:20, Luke Jones wrote: > >>>> + asus_armoury.mini_led_dev_id = 0; >>>> + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) { >>>> + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; >>>> + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, >>>> + &mini_led_mode_attr_group); >>>> + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) { >>>> + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; >>>> + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, >>>> + &mini_led_mode_attr_group); >>>> + } >>>> + if (err) >>>> + pr_warn("Failed to create sysfs-group for mini_led\n"); >>> >>> Shouldn't you fail and clean up here? >> >> Honestly not sure. It's only a failed WMI call, and the group doesn't get created for that fail, the others might be fine. I'll defer to your advice on that. > > It comes down to whether failures are expected on some machines or not > in practice. > > If a machine will fail to create groups, then yeah you should allow > skipping. If it doesn't then I feel you have a much more logical > cleanup and support strategy if you unwind on any failure. > > Hans or Ilpo might have some thoughts here too. I see now that I wasn't thinking clearly about this. I was zooming in on the asus_wmi_is_present() and just somehow blinding myself to the fact that, *that* isn't the error source. Thank you for catching, I will update the code with proper unwind and handling. >>> I think you should be using this mutex more. For example what if an >>> attribute is being written while the module is unloaded? >> >> Good point. I'll adjust code to suit. However if I do, this will trickle through the other patches I've added your review tag to. Will this be okay? >> >>> > > If they change in a material way drop my tag and I can just re-review. Looks like they haven't :)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 3875abba5a79..dedf66e0d099 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -265,6 +265,19 @@ config ASUS_WIRELESS If you choose to compile this driver as a module the module will be called asus-wireless. +config ASUS_ARMOURY + tristate "ASUS Armoury driver" + depends on ACPI_WMI + depends on ASUS_WMI + select FW_ATTR_CLASS + help + Say Y here if you have a WMI aware Asus machine and would like to use the + firmware_attributes API to control various settings typically exposed in + the ASUS Armoury Crate application available on Windows. + + To compile this driver as a module, choose M here: the module will + be called asus-armoury. + config ASUS_WMI tristate "ASUS WMI Driver" depends on ACPI_WMI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index e1b142947067..fe3e7e7dede8 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_APPLE_GMUX) += apple-gmux.o # ASUS obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_ASUS_WIRELESS) += asus-wireless.o +obj-$(CONFIG_ASUS_ARMOURY) += asus-armoury.o obj-$(CONFIG_ASUS_WMI) += asus-wmi.o obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o obj-$(CONFIG_ASUS_TF103C_DOCK) += asus-tf103c-dock.o diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c new file mode 100644 index 000000000000..39e422b16b8e --- /dev/null +++ b/drivers/platform/x86/asus-armoury.c @@ -0,0 +1,563 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Asus Armoury (WMI) attributes driver. This driver uses the fw_attributes + * class to expose the various WMI functions that many gaming and some + * non-gaming ASUS laptops have available. + * These typically don't fit anywhere else in the sysfs such as under LED class, + * hwmon or other, and are set in Windows using the ASUS Armoury Crate tool. + * + * Copyright(C) 2010 Intel Corporation. + * Copyright(C) 2024-2024 Luke Jones <luke@ljones.dev> + */ + +#include <linux/bitfield.h> +#include <linux/device.h> +#include <linux/dmi.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/kobject.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_data/x86/asus-wmi.h> +#include <linux/types.h> + +#include "asus-armoury.h" +#include "firmware_attributes_class.h" +#include "asus-wmi.h" + +#define ASUS_NB_WMI_EVENT_GUID "0B3CBB35-E3C2-45ED-91C2-4C5A6D195D1C" + +#define ASUS_MINI_LED_MODE_MASK 0x03 +/* Standard modes for devices with only on/off */ +#define ASUS_MINI_LED_OFF 0x00 +#define ASUS_MINI_LED_ON 0x01 +/* Like "on" but the effect is more vibrant or brighter */ +#define ASUS_MINI_LED_STRONG_MODE 0x02 +/* New modes for devices with 3 mini-led mode types */ +#define ASUS_MINI_LED_2024_WEAK 0x00 +#define ASUS_MINI_LED_2024_STRONG 0x01 +#define ASUS_MINI_LED_2024_OFF 0x02 + +/* Default limits for tunables available on ASUS ROG laptops */ +#define PPT_CPU_LIMIT_MIN 5 +#define PPT_CPU_LIMIT_MAX 150 +#define PPT_CPU_LIMIT_DEFAULT 80 +#define PPT_PLATFORM_MIN 5 +#define PPT_PLATFORM_MAX 100 +#define PPT_PLATFORM_DEFAULT 80 +#define NVIDIA_BOOST_MIN 5 +#define NVIDIA_BOOST_MAX 25 +#define NVIDIA_TEMP_MIN 75 +#define NVIDIA_TEMP_MAX 87 + +static const struct class *fw_attr_class; + +struct asus_armoury_priv { + struct device *fw_attr_dev; + struct kset *fw_attr_kset; + + u32 mini_led_dev_id; + u32 gpu_mux_dev_id; + + struct mutex mutex; +}; + +static struct asus_armoury_priv asus_armoury = { .mutex = __MUTEX_INITIALIZER( + asus_armoury.mutex) }; + +struct fw_attrs_group { + bool pending_reboot; +}; + +static struct fw_attrs_group fw_attrs = { + .pending_reboot = false, +}; + +struct asus_attr_group { + const struct attribute_group *attr_group; + u32 wmi_devid; +}; + +static bool asus_wmi_is_present(u32 dev_id) +{ + u32 retval; + int status; + + status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, dev_id, 0, &retval); + pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval); + + return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT); +} + +static void asus_set_reboot_and_signal_event(void) +{ + fw_attrs.pending_reboot = true; + kobject_uevent(&asus_armoury.fw_attr_dev->kobj, KOBJ_CHANGE); +} + +static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "%d\n", fw_attrs.pending_reboot); +} + +static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot); + +static bool asus_bios_requires_reboot(struct kobj_attribute *attr) +{ + return !strcmp(attr->attr.name, "gpu_mux_mode"); +} + +/** + * attr_int_store() - Generic store function for use with most WMI functions. + * @kobj: Pointer to the driver object. + * @kobj_attribute: Pointer to the attribute calling this function. + * @buf: The buffer to read from, this is parsed to `int` type. + * @count: + * @min: Minimum accepted value. Below this returns -EINVAL. + * @max: Maximum accepted value. Above this returns -EINVAL. + * @store_value: Pointer to where the parsed value should be stored. + * @wmi_dev: The WMI function ID to use. + * + * The WMI functions available on most ASUS laptops return a 1 as "success", and + * a 0 as failed. However some functions can return n > 1 for additional errors. + * attr_int_store() currently treats all values which are not 1 as errors, ignoring + * the possible differences in WMI error returns. + * + * Returns: Either count, or an error. + */ +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, + size_t count, u32 min, u32 max, u32 *store_value, u32 wmi_dev) +{ + u32 result, value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value < min || value > max) + return -EINVAL; + + err = asus_wmi_set_devstate(wmi_dev, value, &result); + if (err) { + pr_err("Failed to set %s: %d\n", attr->attr.name, err); + return err; + } + + if (result != 1) { + pr_err("Failed to set %s (result): 0x%x\n", attr->attr.name, result); + return -EIO; + } + + if (store_value != NULL) + *store_value = value; + sysfs_notify(kobj, NULL, attr->attr.name); + + if (asus_bios_requires_reboot(attr)) + asus_set_reboot_and_signal_event(); + + return count; +} + +/* Mini-LED mode **************************************************************/ +static ssize_t mini_led_mode_current_value_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + u32 value; + int err; + + err = asus_wmi_get_devstate_dsts(asus_armoury.mini_led_dev_id, &value); + if (err) + return err; + + value &= ASUS_MINI_LED_MODE_MASK; + + /* + * Remap the mode values to match previous generation mini-LED. The last gen + * WMI 0 == off, while on this version WMI 2 == off (flipped). + */ + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { + switch (value) { + case ASUS_MINI_LED_2024_WEAK: + value = ASUS_MINI_LED_ON; + break; + case ASUS_MINI_LED_2024_STRONG: + value = ASUS_MINI_LED_STRONG_MODE; + break; + case ASUS_MINI_LED_2024_OFF: + value = ASUS_MINI_LED_OFF; + break; + } + } + + return sysfs_emit(buf, "%u\n", value); +} + +static ssize_t mini_led_mode_current_value_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, + size_t count) +{ + int result, err; + u32 mode; + + err = kstrtou32(buf, 10, &mode); + if (err) + return err; + + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE && + mode > ASUS_MINI_LED_ON) + return -EINVAL; + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 && + mode > ASUS_MINI_LED_STRONG_MODE) + return -EINVAL; + + /* + * Remap the mode values so expected behaviour is the same as the last + * generation of mini-LED with 0 == off, 1 == on. + */ + if (asus_armoury.mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { + switch (mode) { + case ASUS_MINI_LED_OFF: + mode = ASUS_MINI_LED_2024_OFF; + break; + case ASUS_MINI_LED_ON: + mode = ASUS_MINI_LED_2024_WEAK; + break; + case ASUS_MINI_LED_STRONG_MODE: + mode = ASUS_MINI_LED_2024_STRONG; + break; + } + } + + err = asus_wmi_set_devstate(asus_armoury.mini_led_dev_id, mode, &result); + if (err) { + pr_warn("Failed to set mini-LED: %d\n", err); + return err; + } + + if (result != 1) { + pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(kobj, NULL, attr->attr.name); + + return count; +} + +static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + switch (asus_armoury.mini_led_dev_id) { + case ASUS_WMI_DEVID_MINI_LED_MODE: + return sysfs_emit(buf, "0;1\n"); + case ASUS_WMI_DEVID_MINI_LED_MODE2: + return sysfs_emit(buf, "0;1;2\n"); + } + + return sysfs_emit(buf, "0\n"); +} + +ATTR_GROUP_ENUM_CUSTOM(mini_led_mode, "mini_led_mode", "Set the mini-LED backlight mode"); + +static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, + size_t count) +{ + int result, err; + u32 optimus; + + err = kstrtou32(buf, 10, &optimus); + if (err) + return err; + + if (optimus > 1) + return -EINVAL; + + if (asus_wmi_is_present(ASUS_WMI_DEVID_DGPU)) { + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_DGPU, &result); + if (err) + return err; + if (result && !optimus) { + err = -ENODEV; + pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %02X %02X %d\n", + result, optimus, err); + return err; + } + } + + if (asus_wmi_is_present(ASUS_WMI_DEVID_EGPU)) { + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU, &result); + if (err) + return err; + if (result && !optimus) { + err = -ENODEV; + pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n", + err); + return err; + } + } + + err = asus_wmi_set_devstate(asus_armoury.gpu_mux_dev_id, optimus, &result); + if (err) { + pr_err("Failed to set GPU MUX mode: %d\n", err); + return err; + } + /* !1 is considered a fail by ASUS */ + if (result != 1) { + pr_warn("Failed to set GPU MUX mode (result): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(kobj, NULL, attr->attr.name); + asus_set_reboot_and_signal_event(); + + return count; +} +WMI_SHOW_INT(gpu_mux_mode_current_value, "%d\n", asus_armoury.gpu_mux_dev_id); +ATTR_GROUP_BOOL_CUSTOM(gpu_mux_mode, "gpu_mux_mode", "Set the GPU display MUX mode"); + +/* + * A user may be required to store the value twice, typical store first, then + * rescan PCI bus to activate power, then store a second time to save correctly. + * The reason for this is that an extra code path in the ACPI is enabled when + * the device and bus are powered. + */ +static ssize_t dgpu_disable_current_value_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, + size_t count) +{ + int result, err; + u32 disable; + + err = kstrtou32(buf, 10, &disable); + if (err) + return err; + + if (disable > 1) + return -EINVAL; + + if (asus_armoury.gpu_mux_dev_id) { + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); + if (err) + return err; + if (!result && disable) { + err = -ENODEV; + pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err); + return err; + } + } + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, disable, &result); + if (err) { + pr_warn("Failed to set dGPU disable: %d\n", err); + return err; + } + + if (result != 1) { + pr_warn("Failed to set dGPU disable (result): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(kobj, NULL, attr->attr.name); + + return count; +} +WMI_SHOW_INT(dgpu_disable_current_value, "%d\n", ASUS_WMI_DEVID_DGPU); +ATTR_GROUP_BOOL_CUSTOM(dgpu_disable, "dgpu_disable", "Disable the dGPU"); + +/* The ACPI call to enable the eGPU also disables the internal dGPU */ +static ssize_t egpu_enable_current_value_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count) +{ + int result, err; + u32 enable; + + err = kstrtou32(buf, 10, &enable); + if (err) + return err; + + if (enable > 1) + return -EINVAL; + + err = asus_wmi_get_devstate_dsts(ASUS_WMI_DEVID_EGPU_CONNECTED, &result); + if (err) { + pr_warn("Failed to get eGPU connection status: %d\n", err); + return err; + } + + if (asus_armoury.gpu_mux_dev_id) { + err = asus_wmi_get_devstate_dsts(asus_armoury.gpu_mux_dev_id, &result); + if (err) { + pr_warn("Failed to get GPU MUX status: %d\n", result); + return result; + } + if (!result && enable) { + err = -ENODEV; + pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err); + return err; + } + } + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, enable, &result); + if (err) { + pr_warn("Failed to set eGPU state: %d\n", err); + return err; + } + + if (result != 1) { + pr_warn("Failed to set eGPU state (retval): 0x%x\n", result); + return -EIO; + } + + sysfs_notify(kobj, NULL, attr->attr.name); + + return count; +} +WMI_SHOW_INT(egpu_enable_current_value, "%d\n", ASUS_WMI_DEVID_EGPU); +ATTR_GROUP_BOOL_CUSTOM(egpu_enable, "egpu_enable", "Enable the eGPU (also disables dGPU)"); + +/* Simple attribute creation */ +ATTR_GROUP_ENUM_INT_RO(charge_mode, "charge_mode", ASUS_WMI_DEVID_CHARGE_MODE, "0;1;2", + "Show the current mode of charging"); + +ATTR_GROUP_BOOL_RW(boot_sound, "boot_sound", ASUS_WMI_DEVID_BOOT_SOUND, + "Set the boot POST sound"); +ATTR_GROUP_BOOL_RW(mcu_powersave, "mcu_powersave", ASUS_WMI_DEVID_MCU_POWERSAVE, + "Set MCU powersaving mode"); +ATTR_GROUP_BOOL_RW(panel_od, "panel_overdrive", ASUS_WMI_DEVID_PANEL_OD, + "Set the panel refresh overdrive"); +ATTR_GROUP_BOOL_RO(egpu_connected, "egpu_connected", ASUS_WMI_DEVID_EGPU_CONNECTED, + "Show the eGPU connection status"); + +/* If an attribute does not require any special case handling add it here */ +static const struct asus_attr_group armoury_attr_groups[] = { + { &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED }, + { &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU }, + { &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU }, + + { &charge_mode_attr_group, ASUS_WMI_DEVID_CHARGE_MODE }, + { &boot_sound_attr_group, ASUS_WMI_DEVID_BOOT_SOUND }, + { &mcu_powersave_attr_group, ASUS_WMI_DEVID_MCU_POWERSAVE }, + { &panel_od_attr_group, ASUS_WMI_DEVID_PANEL_OD }, +}; + +static int asus_fw_attr_add(void) +{ + int err; + + err = fw_attributes_class_get(&fw_attr_class); + if (err) + goto fail_class_created; + + asus_armoury.fw_attr_dev = + device_create(fw_attr_class, NULL, MKDEV(0, 0), NULL, "%s", DRIVER_NAME); + + if (IS_ERR(asus_armoury.fw_attr_dev)) { + err = PTR_ERR(asus_armoury.fw_attr_dev); + goto fail_class_created; + } + + asus_armoury.fw_attr_kset = + kset_create_and_add("attributes", NULL, &asus_armoury.fw_attr_dev->kobj); + if (!asus_armoury.fw_attr_dev) { + err = -ENOMEM; + pr_debug("Failed to create and add attributes\n"); + goto err_destroy_classdev; + } + + err = sysfs_create_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); + if (err) { + pr_warn("Failed to create sysfs level attributes\n"); + goto fail_class_created; + } + + err = 0; + asus_armoury.mini_led_dev_id = 0; + if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE)) { + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, + &mini_led_mode_attr_group); + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_MINI_LED_MODE2)) { + asus_armoury.mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, + &mini_led_mode_attr_group); + } + if (err) + pr_warn("Failed to create sysfs-group for mini_led\n"); + + err = 0; + asus_armoury.gpu_mux_dev_id = 0; + if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX)) { + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX; + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, + &gpu_mux_mode_attr_group); + } else if (asus_wmi_is_present(ASUS_WMI_DEVID_GPU_MUX_VIVO)) { + asus_armoury.gpu_mux_dev_id = ASUS_WMI_DEVID_GPU_MUX_VIVO; + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, + &gpu_mux_mode_attr_group); + } + if (err) + pr_warn("Failed to create sysfs-group for gpu_mux\n"); + + for (int i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) { + if (!asus_wmi_is_present(armoury_attr_groups[i].wmi_devid)) + continue; + + err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj, + armoury_attr_groups[i].attr_group); + if (err) + pr_warn("Failed to create sysfs-group for %s\n", + armoury_attr_groups[i].attr_group->name); + else + pr_debug("Created sysfs-group for %s\n", + armoury_attr_groups[i].attr_group->name); + } + + return 0; + +err_destroy_classdev: + device_destroy(fw_attr_class, MKDEV(0, 0)); + +fail_class_created: + fw_attributes_class_put(); + return err; +} + +/* Init / exit ****************************************************************/ + +static int __init asus_fw_init(void) +{ + int err; + + fw_attrs.pending_reboot = false; + + err = asus_fw_attr_add(); + if (err) + return err; + + return 0; +} + +static void __exit asus_fw_exit(void) +{ + mutex_lock(&asus_armoury.mutex); + + sysfs_remove_file(&asus_armoury.fw_attr_kset->kobj, &pending_reboot.attr); + kset_unregister(asus_armoury.fw_attr_kset); + device_destroy(fw_attr_class, MKDEV(0, 0)); + fw_attributes_class_put(); + + mutex_unlock(&asus_armoury.mutex); +} + +module_init(asus_fw_init); +module_exit(asus_fw_exit); + +MODULE_IMPORT_NS(ASUS_WMI); +MODULE_AUTHOR("Luke Jones <luke@ljones.dev>"); +MODULE_DESCRIPTION("ASUS BIOS Configuration Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("wmi:" ASUS_NB_WMI_EVENT_GUID); diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h new file mode 100644 index 000000000000..b99fd136abf1 --- /dev/null +++ b/drivers/platform/x86/asus-armoury.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Definitions for kernel modules using asus-armoury driver + * + * Copyright (c) 2024 Luke Jones <luke@ljones.dev> + */ + +#ifndef _ASUS_BIOSCFG_H_ +#define _ASUS_BIOSCFG_H_ + +#include <linux/types.h> +#include <linux/platform_device.h> + +#define DRIVER_NAME "asus-armoury" + +static ssize_t attr_int_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count, u32 min, u32 max, + u32 *store_value, u32 wmi_dev); + +static ssize_t enum_type_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + return sysfs_emit(buf, "enumeration\n"); +} + +#define __ASUS_ATTR_RO(_func, _name) \ + { \ + .attr = { .name = __stringify(_name), .mode = 0444 }, \ + .show = _func##_##_name##_show, \ + } + +#define __ASUS_ATTR_RO_AS(_name, _show) \ + { \ + .attr = { .name = __stringify(_name), .mode = 0444 }, \ + .show = _show, \ + } + +#define __ASUS_ATTR_RW(_func, _name) \ + __ATTR(_name, 0644, _func##_##_name##_show, _func##_##_name##_store) + +#define __WMI_STORE_INT(_attr, _min, _max, _wmi) \ + static ssize_t _attr##_store(struct kobject *kobj, \ + struct kobj_attribute *attr, \ + const char *buf, size_t count) \ + { \ + return attr_int_store(kobj, attr, buf, count, _min, _max, \ + NULL, _wmi); \ + } + +#define WMI_SHOW_INT(_attr, _fmt, _wmi) \ + static ssize_t _attr##_show(struct kobject *kobj, \ + struct kobj_attribute *attr, char *buf) \ + { \ + u32 result; \ + int err; \ + err = asus_wmi_get_devstate_dsts(_wmi, &result); \ + if (err) \ + return err; \ + return sysfs_emit(buf, _fmt, \ + result & ~ASUS_WMI_DSTS_PRESENCE_BIT); \ + } + +/* Create functions and attributes for use in other macros or on their own */ + +#define __ATTR_CURRENT_INT_RO(_attr, _wmi) \ + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ + static struct kobj_attribute attr_##_attr##_current_value = \ + __ASUS_ATTR_RO(_attr, current_value) + +#define __ATTR_CURRENT_INT_RW(_attr, _minv, _maxv, _wmi) \ + __WMI_STORE_INT(_attr##_current_value, _minv, _maxv, _wmi); \ + WMI_SHOW_INT(_attr##_current_value, "%d\n", _wmi); \ + static struct kobj_attribute attr_##_attr##_current_value = \ + __ASUS_ATTR_RW(_attr, current_value) + +/* Shows a formatted static variable */ +#define __ATTR_SHOW_FMT(_prop, _attrname, _fmt, _val) \ + static ssize_t _attrname##_##_prop##_show( \ + struct kobject *kobj, struct kobj_attribute *attr, char *buf) \ + { \ + return sysfs_emit(buf, _fmt, _val); \ + } \ + static struct kobj_attribute attr_##_attrname##_##_prop = \ + __ASUS_ATTR_RO(_attrname, _prop) + +/* Boolean style enumeration, base macro. Requires adding show/store */ +#define __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) \ + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ + __ATTR_SHOW_FMT(possible_values, _attrname, "%s\n", _possible); \ + static struct kobj_attribute attr_##_attrname##_type = \ + __ASUS_ATTR_RO_AS(type, enum_type_show); \ + static struct attribute *_attrname##_attrs[] = { \ + &attr_##_attrname##_current_value.attr, \ + &attr_##_attrname##_display_name.attr, \ + &attr_##_attrname##_possible_values.attr, \ + &attr_##_attrname##_type.attr, \ + NULL \ + }; \ + static const struct attribute_group _attrname##_attr_group = { \ + .name = _fsname, .attrs = _attrname##_attrs \ + } + +#define ATTR_GROUP_BOOL_RO(_attrname, _fsname, _wmi, _dispname) \ + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) + +#define ATTR_GROUP_BOOL_RW(_attrname, _fsname, _wmi, _dispname) \ + __ATTR_CURRENT_INT_RW(_attrname, 0, 1, _wmi); \ + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) + +/* + * Requires <name>_current_value_show(), <name>_current_value_show() + */ +#define ATTR_GROUP_BOOL_CUSTOM(_attrname, _fsname, _dispname) \ + static struct kobj_attribute attr_##_attrname##_current_value = \ + __ASUS_ATTR_RW(_attrname, current_value); \ + __ATTR_GROUP_ENUM(_attrname, _fsname, "0;1", _dispname) + +#define ATTR_GROUP_ENUM_INT_RO(_attrname, _fsname, _wmi, _possible, _dispname) \ + __ATTR_CURRENT_INT_RO(_attrname, _wmi); \ + __ATTR_GROUP_ENUM(_attrname, _fsname, _possible, _dispname) + +/* + * Requires <name>_current_value_show(), <name>_current_value_show() + * and <name>_possible_values_show() + */ +#define ATTR_GROUP_ENUM_CUSTOM(_attrname, _fsname, _dispname) \ + __ATTR_SHOW_FMT(display_name, _attrname, "%s\n", _dispname); \ + static struct kobj_attribute attr_##_attrname##_current_value = \ + __ASUS_ATTR_RW(_attrname, current_value); \ + static struct kobj_attribute attr_##_attrname##_possible_values = \ + __ASUS_ATTR_RO(_attrname, possible_values); \ + static struct kobj_attribute attr_##_attrname##_type = \ + __ASUS_ATTR_RO_AS(type, enum_type_show); \ + static struct attribute *_attrname##_attrs[] = { \ + &attr_##_attrname##_current_value.attr, \ + &attr_##_attrname##_display_name.attr, \ + &attr_##_attrname##_possible_values.attr, \ + &attr_##_attrname##_type.attr, \ + NULL \ + }; \ + static const struct attribute_group _attrname##_attr_group = { \ + .name = _fsname, .attrs = _attrname##_attrs \ + } + +#endif /* _ASUS_BIOSCFG_H_ */
The fw_attributes_class provides a much cleaner interface to all of the attributes introduced to asus-wmi. This patch moves all of these extra attributes over to fw_attributes_class, and shifts the bulk of these definitions to a new kernel module to reduce the clutter of asus-wmi with the intention of deprecating the asus-wmi attributes in future. The work applies only to WMI methods which don't have a clearly defined place within the sysfs and as a result ended up lumped together in /sys/devices/platform/asus-nb-wmi/ with no standard API. Where possible the fw attrs now implement defaults, min, max, scalar, choices, etc. As en example dgpu_disable becomes: /sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/ ├── current_value ├── display_name ├── possible_values └── type as do other attributes. The ppt_* based attributes are removed in this initial patch as the implementation is somewhat broken due to the WMI methods requiring a set of limits on the values accepted (which is not provided by WMI). Signed-off-by: Luke D. Jones <luke@ljones.dev> --- drivers/platform/x86/Kconfig | 13 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/asus-armoury.c | 563 ++++++++++++++++++++++++++++ drivers/platform/x86/asus-armoury.h | 146 ++++++++ 4 files changed, 723 insertions(+) create mode 100644 drivers/platform/x86/asus-armoury.c create mode 100644 drivers/platform/x86/asus-armoury.h