diff mbox series

[3/4] ARM: dts: renesas: rskrza1: use interrupts-extended for gpio-keys

Message ID 20240927095414.10241-9-wsa+renesas@sang-engineering.com (mailing list archive)
State Mainlined
Commit b630352660cd1377364d21c643b1bd8d972537f6
Delegated to: Geert Uytterhoeven
Headers show
Series ARM: dts: renesas: use interrupts-extended for gpio-keys | expand

Commit Message

Wolfram Sang Sept. 27, 2024, 9:54 a.m. UTC
Use the more concise interrupts-extended property to fully describe the
interrupt.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

Comments

Krzysztof Kozlowski Sept. 27, 2024, 12:30 p.m. UTC | #1
On 27/09/2024 11:54, Wolfram Sang wrote:
> Use the more concise interrupts-extended property to fully describe the
> interrupt.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---

The code is correct, but are you sure this is not just a churn?

Best regards,
Krzysztof
Geert Uytterhoeven Sept. 30, 2024, 2:29 p.m. UTC | #2
On Fri, Sep 27, 2024 at 11:54 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> Use the more concise interrupts-extended property to fully describe the
> interrupt.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v6.13.

Gr{oetje,eeting}s,

                        Geert
Wolfram Sang Sept. 30, 2024, 2:38 p.m. UTC | #3
> The code is correct, but are you sure this is not just a churn?

A little, but I prefer the consistency among Renesas boards here.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
index b547216d4801..9ff3f04c1b02 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -78,24 +78,21 @@  keyboard {
 		pinctrl-0 = <&keyboard_pins>;
 
 		key-1 {
-			interrupt-parent = <&irqc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 3 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_1>;
 			label = "SW1";
 			wakeup-source;
 		};
 
 		key-2 {
-			interrupt-parent = <&irqc>;
-			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 2 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_2>;
 			label = "SW2";
 			wakeup-source;
 		};
 
 		key-3 {
-			interrupt-parent = <&irqc>;
-			interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+			interrupts-extended = <&irqc 5 IRQ_TYPE_EDGE_BOTH>;
 			linux,code = <KEY_3>;
 			label = "SW3";
 			wakeup-source;