Message ID | 20240910170610.226189-10-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | media: ov5645: Add support for streams | expand |
Hi Prabhakar, Thank you for the patch. On Tue, Sep 10, 2024 at 06:06:08PM +0100, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Use the newly added internal pad API to expose the internal > configuration of the sensor to userspace in a standard manner. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > drivers/media/i2c/ov5645.c | 107 +++++++++++++++++++++++++++---------- > 1 file changed, 79 insertions(+), 28 deletions(-) > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > index dc93514608ee..255c6395a268 100644 > --- a/drivers/media/i2c/ov5645.c > +++ b/drivers/media/i2c/ov5645.c > @@ -60,6 +60,10 @@ > #define OV5645_SDE_SAT_U 0x5583 > #define OV5645_SDE_SAT_V 0x5584 > > +#define OV5645_NATIVE_FORMAT MEDIA_BUS_FMT_SBGGR8_1X8 > +#define OV5645_NATIVE_WIDTH 2592 > +#define OV5645_NATIVE_HEIGHT 1944 > + > /* regulator supplies */ > static const char * const ov5645_supply_name[] = { > "vdddo", /* Digital I/O (1.8V) supply */ > @@ -69,6 +73,12 @@ static const char * const ov5645_supply_name[] = { > > #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name) > > +enum ov5645_pad_ids { > + OV5645_PAD_SOURCE, > + OV5645_PAD_IMAGE, > + OV5645_NUM_PADS, > +}; > + > struct reg_value { > u16 reg; > u8 val; > @@ -87,7 +97,7 @@ struct ov5645 { > struct i2c_client *i2c_client; > struct device *dev; > struct v4l2_subdev sd; > - struct media_pad pad; > + struct media_pad pads[OV5645_NUM_PADS]; > struct v4l2_fwnode_endpoint ep; > struct v4l2_rect crop; > struct clk *xclk; > @@ -826,7 +836,10 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, > if (code->index > 0) > return -EINVAL; > > - code->code = MEDIA_BUS_FMT_UYVY8_1X16; > + if (code->pad == OV5645_PAD_IMAGE) > + code->code = OV5645_NATIVE_FORMAT; > + else > + code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > return 0; > } > @@ -835,16 +848,24 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, > struct v4l2_subdev_state *sd_state, > struct v4l2_subdev_frame_size_enum *fse) > { > - if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16) > - return -EINVAL; > - > - if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > - return -EINVAL; > - > - fse->min_width = ov5645_mode_info_data[fse->index].width; > - fse->max_width = ov5645_mode_info_data[fse->index].width; > - fse->min_height = ov5645_mode_info_data[fse->index].height; > - fse->max_height = ov5645_mode_info_data[fse->index].height; > + if (fse->pad == OV5645_PAD_IMAGE) { > + if (fse->code != OV5645_NATIVE_FORMAT || fse->index > 0) > + return -EINVAL; > + > + fse->min_width = OV5645_NATIVE_WIDTH; > + fse->max_width = OV5645_NATIVE_WIDTH; > + fse->min_height = OV5645_NATIVE_HEIGHT; > + fse->max_height = OV5645_NATIVE_HEIGHT; > + } else { > + if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16 || This will be interesting. With internal pads we will introduce the concept of a "subdev model", which will formally document how the V4L2 subdev configuration items (formats, selection rectangles, ...) maps to hardware features. Sakari is working on the definition of a subdev model for raw sensors, that should catter for the needs of raw sensors without a bayer scaler (the vast majority of them). To use internal pads with a non-raw sensor, we'll have to define a model. It may be more challenging/complicated to do so, as the YUV sensor features are less standardized, but it will be an interesting development. > + fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > + return -EINVAL; > + > + fse->min_width = ov5645_mode_info_data[fse->index].width; > + fse->max_width = ov5645_mode_info_data[fse->index].width; > + fse->min_height = ov5645_mode_info_data[fse->index].height; > + fse->max_height = ov5645_mode_info_data[fse->index].height; > + } > > return 0; > } > @@ -855,18 +876,55 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > { > struct ov5645 *ov5645 = to_ov5645(sd); > struct v4l2_mbus_framefmt *__format; > + struct v4l2_rect *compose; > struct v4l2_rect *__crop; While at it, could you rename __crop to crop ? > const struct ov5645_mode_info *new_mode; > int ret; > > - __crop = v4l2_subdev_state_get_crop(sd_state, 0); > + if (format->pad != OV5645_PAD_SOURCE) > + return v4l2_subdev_get_fmt(sd, sd_state, format); > + > new_mode = v4l2_find_nearest_size(ov5645_mode_info_data, > ARRAY_SIZE(ov5645_mode_info_data), > width, height, format->format.width, > format->format.height); > - > - __crop->width = new_mode->width; > - __crop->height = new_mode->height; > + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > + format->format.width = new_mode->width; > + format->format.height = new_mode->height; > + format->format.field = V4L2_FIELD_NONE; > + format->format.colorspace = V4L2_COLORSPACE_SRGB; > + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > + format->format.quantization = V4L2_QUANTIZATION_DEFAULT; > + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; Drivers are not supposed to return DEFAULT values, you should pick appropriate values. > + > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_IMAGE); Maybe __format could also become fmt. > + *__format = format->format; > + __format->code = OV5645_NATIVE_FORMAT; > + __format->width = OV5645_NATIVE_WIDTH; > + __format->height = OV5645_NATIVE_HEIGHT; > + > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_IMAGE); > + __crop->width = format->format.width; > + __crop->height = format->format.height; > + > + /* > + * The compose rectangle models binning, its size is the sensor output > + * size. > + */ > + compose = v4l2_subdev_state_get_compose(sd_state, OV5645_PAD_IMAGE); > + compose->left = 0; > + compose->top = 0; > + compose->width = format->format.width; > + compose->height = format->format.height; > + > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_SOURCE); > + __crop->left = 0; > + __crop->top = 0; > + __crop->width = format->format.width; > + __crop->height = format->format.height; > + > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_SOURCE); > + *__format = format->format; > > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, > @@ -882,14 +940,6 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > ov5645->current_mode = new_mode; > } > > - __format = v4l2_subdev_state_get_format(sd_state, 0); > - __format->width = __crop->width; > - __format->height = __crop->height; > - __format->code = MEDIA_BUS_FMT_UYVY8_1X16; > - __format->field = V4L2_FIELD_NONE; > - __format->colorspace = V4L2_COLORSPACE_SRGB; > - > - format->format = *__format; > > return 0; > } > @@ -899,7 +949,7 @@ static int ov5645_init_state(struct v4l2_subdev *subdev, > { > struct v4l2_subdev_format fmt = { > .which = V4L2_SUBDEV_FORMAT_TRY, > - .pad = 0, > + .pad = OV5645_PAD_SOURCE, > .format = { > .code = MEDIA_BUS_FMT_UYVY8_1X16, > .width = ov5645_mode_info_data[1].width, > @@ -919,7 +969,7 @@ static int ov5645_get_selection(struct v4l2_subdev *sd, > if (sel->target != V4L2_SEL_TGT_CROP) > return -EINVAL; > > - sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); > + sel->r = *v4l2_subdev_state_get_crop(sd_state, sel->pad); Now there's a compose rectangle, you should support getting it. > return 0; > } > > @@ -1123,11 +1173,12 @@ static int ov5645_probe(struct i2c_client *client) > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > ov5645->sd.internal_ops = &ov5645_internal_ops; > ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > - ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > + ov5645->pads[OV5645_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > + ov5645->pads[OV5645_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL; > ov5645->sd.dev = dev; > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > - ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); > + ret = media_entity_pads_init(&ov5645->sd.entity, ARRAY_SIZE(ov5645->pads), ov5645->pads); Line wrap. > if (ret < 0) { > dev_err_probe(dev, ret, "could not register media entity\n"); > goto free_ctrl;
Hi Laurent, Prabhakar, On Wed, Sep 25, 2024 at 07:21:53PM +0300, Laurent Pinchart wrote: > Hi Prabhakar, > > Thank you for the patch. > > On Tue, Sep 10, 2024 at 06:06:08PM +0100, Prabhakar wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Use the newly added internal pad API to expose the internal > > configuration of the sensor to userspace in a standard manner. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > --- > > drivers/media/i2c/ov5645.c | 107 +++++++++++++++++++++++++++---------- > > 1 file changed, 79 insertions(+), 28 deletions(-) > > > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > > index dc93514608ee..255c6395a268 100644 > > --- a/drivers/media/i2c/ov5645.c > > +++ b/drivers/media/i2c/ov5645.c > > @@ -60,6 +60,10 @@ > > #define OV5645_SDE_SAT_U 0x5583 > > #define OV5645_SDE_SAT_V 0x5584 > > > > +#define OV5645_NATIVE_FORMAT MEDIA_BUS_FMT_SBGGR8_1X8 > > +#define OV5645_NATIVE_WIDTH 2592 > > +#define OV5645_NATIVE_HEIGHT 1944 > > + > > /* regulator supplies */ > > static const char * const ov5645_supply_name[] = { > > "vdddo", /* Digital I/O (1.8V) supply */ > > @@ -69,6 +73,12 @@ static const char * const ov5645_supply_name[] = { > > > > #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name) > > > > +enum ov5645_pad_ids { > > + OV5645_PAD_SOURCE, > > + OV5645_PAD_IMAGE, > > + OV5645_NUM_PADS, > > +}; > > + > > struct reg_value { > > u16 reg; > > u8 val; > > @@ -87,7 +97,7 @@ struct ov5645 { > > struct i2c_client *i2c_client; > > struct device *dev; > > struct v4l2_subdev sd; > > - struct media_pad pad; > > + struct media_pad pads[OV5645_NUM_PADS]; > > struct v4l2_fwnode_endpoint ep; > > struct v4l2_rect crop; > > struct clk *xclk; > > @@ -826,7 +836,10 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, > > if (code->index > 0) > > return -EINVAL; > > > > - code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > + if (code->pad == OV5645_PAD_IMAGE) > > + code->code = OV5645_NATIVE_FORMAT; > > + else > > + code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > > > return 0; > > } > > @@ -835,16 +848,24 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, > > struct v4l2_subdev_state *sd_state, > > struct v4l2_subdev_frame_size_enum *fse) > > { > > - if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16) > > - return -EINVAL; > > - > > - if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > > - return -EINVAL; > > - > > - fse->min_width = ov5645_mode_info_data[fse->index].width; > > - fse->max_width = ov5645_mode_info_data[fse->index].width; > > - fse->min_height = ov5645_mode_info_data[fse->index].height; > > - fse->max_height = ov5645_mode_info_data[fse->index].height; > > + if (fse->pad == OV5645_PAD_IMAGE) { > > + if (fse->code != OV5645_NATIVE_FORMAT || fse->index > 0) > > + return -EINVAL; > > + > > + fse->min_width = OV5645_NATIVE_WIDTH; > > + fse->max_width = OV5645_NATIVE_WIDTH; > > + fse->min_height = OV5645_NATIVE_HEIGHT; > > + fse->max_height = OV5645_NATIVE_HEIGHT; > > + } else { > > + if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16 || > > This will be interesting. With internal pads we will introduce the > concept of a "subdev model", which will formally document how the V4L2 > subdev configuration items (formats, selection rectangles, ...) maps to > hardware features. Sakari is working on the definition of a subdev model > for raw sensors, that should catter for the needs of raw sensors without > a bayer scaler (the vast majority of them). To use internal pads with a > non-raw sensor, we'll have to define a model. It may be more > challenging/complicated to do so, as the YUV sensor features are less > standardized, but it will be an interesting development. I think I'll make the sub-device model a bitmask, to allow implementing more than one at the same time. I'll try to remember to cc you to the patchset when I'll send it, likely next week. > > > + fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > > + return -EINVAL; > > + > > + fse->min_width = ov5645_mode_info_data[fse->index].width; > > + fse->max_width = ov5645_mode_info_data[fse->index].width; > > + fse->min_height = ov5645_mode_info_data[fse->index].height; > > + fse->max_height = ov5645_mode_info_data[fse->index].height; > > + } > > > > return 0; > > } > > @@ -855,18 +876,55 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > > { > > struct ov5645 *ov5645 = to_ov5645(sd); > > struct v4l2_mbus_framefmt *__format; > > + struct v4l2_rect *compose; > > struct v4l2_rect *__crop; > > While at it, could you rename __crop to crop ? > > > const struct ov5645_mode_info *new_mode; > > int ret; > > > > - __crop = v4l2_subdev_state_get_crop(sd_state, 0); > > + if (format->pad != OV5645_PAD_SOURCE) > > + return v4l2_subdev_get_fmt(sd, sd_state, format); > > + > > new_mode = v4l2_find_nearest_size(ov5645_mode_info_data, > > ARRAY_SIZE(ov5645_mode_info_data), > > width, height, format->format.width, > > format->format.height); > > - > > - __crop->width = new_mode->width; > > - __crop->height = new_mode->height; > > + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > > + format->format.width = new_mode->width; > > + format->format.height = new_mode->height; > > + format->format.field = V4L2_FIELD_NONE; > > + format->format.colorspace = V4L2_COLORSPACE_SRGB; > > + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > > + format->format.quantization = V4L2_QUANTIZATION_DEFAULT; > > + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; > > Drivers are not supposed to return DEFAULT values, you should pick > appropriate values. > > > + > > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_IMAGE); > > Maybe __format could also become fmt. > > > + *__format = format->format; > > + __format->code = OV5645_NATIVE_FORMAT; > > + __format->width = OV5645_NATIVE_WIDTH; > > + __format->height = OV5645_NATIVE_HEIGHT; > > + > > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_IMAGE); > > + __crop->width = format->format.width; > > + __crop->height = format->format.height; > > + > > + /* > > + * The compose rectangle models binning, its size is the sensor output > > + * size. > > + */ > > + compose = v4l2_subdev_state_get_compose(sd_state, OV5645_PAD_IMAGE); > > + compose->left = 0; > > + compose->top = 0; > > + compose->width = format->format.width; > > + compose->height = format->format.height; > > + > > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_SOURCE); > > + __crop->left = 0; > > + __crop->top = 0; > > + __crop->width = format->format.width; > > + __crop->height = format->format.height; > > + > > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_SOURCE); > > + *__format = format->format; > > > > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, > > @@ -882,14 +940,6 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > > ov5645->current_mode = new_mode; > > } > > > > - __format = v4l2_subdev_state_get_format(sd_state, 0); > > - __format->width = __crop->width; > > - __format->height = __crop->height; > > - __format->code = MEDIA_BUS_FMT_UYVY8_1X16; > > - __format->field = V4L2_FIELD_NONE; > > - __format->colorspace = V4L2_COLORSPACE_SRGB; > > - > > - format->format = *__format; > > > > return 0; > > } > > @@ -899,7 +949,7 @@ static int ov5645_init_state(struct v4l2_subdev *subdev, > > { > > struct v4l2_subdev_format fmt = { > > .which = V4L2_SUBDEV_FORMAT_TRY, > > - .pad = 0, > > + .pad = OV5645_PAD_SOURCE, > > .format = { > > .code = MEDIA_BUS_FMT_UYVY8_1X16, > > .width = ov5645_mode_info_data[1].width, > > @@ -919,7 +969,7 @@ static int ov5645_get_selection(struct v4l2_subdev *sd, > > if (sel->target != V4L2_SEL_TGT_CROP) > > return -EINVAL; > > > > - sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); > > + sel->r = *v4l2_subdev_state_get_crop(sd_state, sel->pad); > > Now there's a compose rectangle, you should support getting it. > > > return 0; > > } > > > > @@ -1123,11 +1173,12 @@ static int ov5645_probe(struct i2c_client *client) > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > > ov5645->sd.internal_ops = &ov5645_internal_ops; > > ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > > - ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > > + ov5645->pads[OV5645_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > > + ov5645->pads[OV5645_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL; > > ov5645->sd.dev = dev; > > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > > > - ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); > > + ret = media_entity_pads_init(&ov5645->sd.entity, ARRAY_SIZE(ov5645->pads), ov5645->pads); > > Line wrap. It's good to run: scripts/checkpatch.pl --strict --max-line-length=80 on the patches. > > > if (ret < 0) { > > dev_err_probe(dev, ret, "could not register media entity\n"); > > goto free_ctrl; >
Hi Sakari, On Thu, Sep 26, 2024 at 4:49 PM Sakari Ailus <sakari.ailus@linux.intel.com> wrote: > > Hi Laurent, Prabhakar, > > On Wed, Sep 25, 2024 at 07:21:53PM +0300, Laurent Pinchart wrote: > > Hi Prabhakar, > > > > Thank you for the patch. > > > > On Tue, Sep 10, 2024 at 06:06:08PM +0100, Prabhakar wrote: > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > > > Use the newly added internal pad API to expose the internal > > > configuration of the sensor to userspace in a standard manner. > > > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > --- > > > drivers/media/i2c/ov5645.c | 107 +++++++++++++++++++++++++++---------- > > > 1 file changed, 79 insertions(+), 28 deletions(-) > > > > > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > > > index dc93514608ee..255c6395a268 100644 > > > --- a/drivers/media/i2c/ov5645.c > > > +++ b/drivers/media/i2c/ov5645.c > > > @@ -60,6 +60,10 @@ > > > #define OV5645_SDE_SAT_U 0x5583 > > > #define OV5645_SDE_SAT_V 0x5584 > > > > > > +#define OV5645_NATIVE_FORMAT MEDIA_BUS_FMT_SBGGR8_1X8 > > > +#define OV5645_NATIVE_WIDTH 2592 > > > +#define OV5645_NATIVE_HEIGHT 1944 > > > + > > > /* regulator supplies */ > > > static const char * const ov5645_supply_name[] = { > > > "vdddo", /* Digital I/O (1.8V) supply */ > > > @@ -69,6 +73,12 @@ static const char * const ov5645_supply_name[] = { > > > > > > #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name) > > > > > > +enum ov5645_pad_ids { > > > + OV5645_PAD_SOURCE, > > > + OV5645_PAD_IMAGE, > > > + OV5645_NUM_PADS, > > > +}; > > > + > > > struct reg_value { > > > u16 reg; > > > u8 val; > > > @@ -87,7 +97,7 @@ struct ov5645 { > > > struct i2c_client *i2c_client; > > > struct device *dev; > > > struct v4l2_subdev sd; > > > - struct media_pad pad; > > > + struct media_pad pads[OV5645_NUM_PADS]; > > > struct v4l2_fwnode_endpoint ep; > > > struct v4l2_rect crop; > > > struct clk *xclk; > > > @@ -826,7 +836,10 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, > > > if (code->index > 0) > > > return -EINVAL; > > > > > > - code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > > + if (code->pad == OV5645_PAD_IMAGE) > > > + code->code = OV5645_NATIVE_FORMAT; > > > + else > > > + code->code = MEDIA_BUS_FMT_UYVY8_1X16; > > > > > > return 0; > > > } > > > @@ -835,16 +848,24 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, > > > struct v4l2_subdev_state *sd_state, > > > struct v4l2_subdev_frame_size_enum *fse) > > > { > > > - if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16) > > > - return -EINVAL; > > > - > > > - if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > > > - return -EINVAL; > > > - > > > - fse->min_width = ov5645_mode_info_data[fse->index].width; > > > - fse->max_width = ov5645_mode_info_data[fse->index].width; > > > - fse->min_height = ov5645_mode_info_data[fse->index].height; > > > - fse->max_height = ov5645_mode_info_data[fse->index].height; > > > + if (fse->pad == OV5645_PAD_IMAGE) { > > > + if (fse->code != OV5645_NATIVE_FORMAT || fse->index > 0) > > > + return -EINVAL; > > > + > > > + fse->min_width = OV5645_NATIVE_WIDTH; > > > + fse->max_width = OV5645_NATIVE_WIDTH; > > > + fse->min_height = OV5645_NATIVE_HEIGHT; > > > + fse->max_height = OV5645_NATIVE_HEIGHT; > > > + } else { > > > + if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16 || > > > > This will be interesting. With internal pads we will introduce the > > concept of a "subdev model", which will formally document how the V4L2 > > subdev configuration items (formats, selection rectangles, ...) maps to > > hardware features. Sakari is working on the definition of a subdev model > > for raw sensors, that should catter for the needs of raw sensors without > > a bayer scaler (the vast majority of them). To use internal pads with a > > non-raw sensor, we'll have to define a model. It may be more > > challenging/complicated to do so, as the YUV sensor features are less > > standardized, but it will be an interesting development. > > I think I'll make the sub-device model a bitmask, to allow implementing > more than one at the same time. > > I'll try to remember to cc you to the patchset when I'll send it, likely > next week. > Great, I'll withhold sending a v3. > > > > > + fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) > > > + return -EINVAL; > > > + > > > + fse->min_width = ov5645_mode_info_data[fse->index].width; > > > + fse->max_width = ov5645_mode_info_data[fse->index].width; > > > + fse->min_height = ov5645_mode_info_data[fse->index].height; > > > + fse->max_height = ov5645_mode_info_data[fse->index].height; > > > + } > > > > > > return 0; > > > } > > > @@ -855,18 +876,55 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > > > { > > > struct ov5645 *ov5645 = to_ov5645(sd); > > > struct v4l2_mbus_framefmt *__format; > > > + struct v4l2_rect *compose; > > > struct v4l2_rect *__crop; > > > > While at it, could you rename __crop to crop ? > > > > > const struct ov5645_mode_info *new_mode; > > > int ret; > > > > > > - __crop = v4l2_subdev_state_get_crop(sd_state, 0); > > > + if (format->pad != OV5645_PAD_SOURCE) > > > + return v4l2_subdev_get_fmt(sd, sd_state, format); > > > + > > > new_mode = v4l2_find_nearest_size(ov5645_mode_info_data, > > > ARRAY_SIZE(ov5645_mode_info_data), > > > width, height, format->format.width, > > > format->format.height); > > > - > > > - __crop->width = new_mode->width; > > > - __crop->height = new_mode->height; > > > + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; > > > + format->format.width = new_mode->width; > > > + format->format.height = new_mode->height; > > > + format->format.field = V4L2_FIELD_NONE; > > > + format->format.colorspace = V4L2_COLORSPACE_SRGB; > > > + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > > > + format->format.quantization = V4L2_QUANTIZATION_DEFAULT; > > > + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; > > > > Drivers are not supposed to return DEFAULT values, you should pick > > appropriate values. > > > > > + > > > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_IMAGE); > > > > Maybe __format could also become fmt. > > > > > + *__format = format->format; > > > + __format->code = OV5645_NATIVE_FORMAT; > > > + __format->width = OV5645_NATIVE_WIDTH; > > > + __format->height = OV5645_NATIVE_HEIGHT; > > > + > > > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_IMAGE); > > > + __crop->width = format->format.width; > > > + __crop->height = format->format.height; > > > + > > > + /* > > > + * The compose rectangle models binning, its size is the sensor output > > > + * size. > > > + */ > > > + compose = v4l2_subdev_state_get_compose(sd_state, OV5645_PAD_IMAGE); > > > + compose->left = 0; > > > + compose->top = 0; > > > + compose->width = format->format.width; > > > + compose->height = format->format.height; > > > + > > > + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_SOURCE); > > > + __crop->left = 0; > > > + __crop->top = 0; > > > + __crop->width = format->format.width; > > > + __crop->height = format->format.height; > > > + > > > + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_SOURCE); > > > + *__format = format->format; > > > > > > if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > > ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, > > > @@ -882,14 +940,6 @@ static int ov5645_set_format(struct v4l2_subdev *sd, > > > ov5645->current_mode = new_mode; > > > } > > > > > > - __format = v4l2_subdev_state_get_format(sd_state, 0); > > > - __format->width = __crop->width; > > > - __format->height = __crop->height; > > > - __format->code = MEDIA_BUS_FMT_UYVY8_1X16; > > > - __format->field = V4L2_FIELD_NONE; > > > - __format->colorspace = V4L2_COLORSPACE_SRGB; > > > - > > > - format->format = *__format; > > > > > > return 0; > > > } > > > @@ -899,7 +949,7 @@ static int ov5645_init_state(struct v4l2_subdev *subdev, > > > { > > > struct v4l2_subdev_format fmt = { > > > .which = V4L2_SUBDEV_FORMAT_TRY, > > > - .pad = 0, > > > + .pad = OV5645_PAD_SOURCE, > > > .format = { > > > .code = MEDIA_BUS_FMT_UYVY8_1X16, > > > .width = ov5645_mode_info_data[1].width, > > > @@ -919,7 +969,7 @@ static int ov5645_get_selection(struct v4l2_subdev *sd, > > > if (sel->target != V4L2_SEL_TGT_CROP) > > > return -EINVAL; > > > > > > - sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); > > > + sel->r = *v4l2_subdev_state_get_crop(sd_state, sel->pad); > > > > Now there's a compose rectangle, you should support getting it. > > > > > return 0; > > > } > > > > > > @@ -1123,11 +1173,12 @@ static int ov5645_probe(struct i2c_client *client) > > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > > > ov5645->sd.internal_ops = &ov5645_internal_ops; > > > ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > > > - ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > > > + ov5645->pads[OV5645_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > > > + ov5645->pads[OV5645_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL; > > > ov5645->sd.dev = dev; > > > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > > > > > - ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); > > > + ret = media_entity_pads_init(&ov5645->sd.entity, ARRAY_SIZE(ov5645->pads), ov5645->pads); > > > > Line wrap. > > It's good to run: > > scripts/checkpatch.pl --strict --max-line-length=80 > > on the patches. > Thanks for the pointer. Cheers, Prabhakar
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c index dc93514608ee..255c6395a268 100644 --- a/drivers/media/i2c/ov5645.c +++ b/drivers/media/i2c/ov5645.c @@ -60,6 +60,10 @@ #define OV5645_SDE_SAT_U 0x5583 #define OV5645_SDE_SAT_V 0x5584 +#define OV5645_NATIVE_FORMAT MEDIA_BUS_FMT_SBGGR8_1X8 +#define OV5645_NATIVE_WIDTH 2592 +#define OV5645_NATIVE_HEIGHT 1944 + /* regulator supplies */ static const char * const ov5645_supply_name[] = { "vdddo", /* Digital I/O (1.8V) supply */ @@ -69,6 +73,12 @@ static const char * const ov5645_supply_name[] = { #define OV5645_NUM_SUPPLIES ARRAY_SIZE(ov5645_supply_name) +enum ov5645_pad_ids { + OV5645_PAD_SOURCE, + OV5645_PAD_IMAGE, + OV5645_NUM_PADS, +}; + struct reg_value { u16 reg; u8 val; @@ -87,7 +97,7 @@ struct ov5645 { struct i2c_client *i2c_client; struct device *dev; struct v4l2_subdev sd; - struct media_pad pad; + struct media_pad pads[OV5645_NUM_PADS]; struct v4l2_fwnode_endpoint ep; struct v4l2_rect crop; struct clk *xclk; @@ -826,7 +836,10 @@ static int ov5645_enum_mbus_code(struct v4l2_subdev *sd, if (code->index > 0) return -EINVAL; - code->code = MEDIA_BUS_FMT_UYVY8_1X16; + if (code->pad == OV5645_PAD_IMAGE) + code->code = OV5645_NATIVE_FORMAT; + else + code->code = MEDIA_BUS_FMT_UYVY8_1X16; return 0; } @@ -835,16 +848,24 @@ static int ov5645_enum_frame_size(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fse) { - if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16) - return -EINVAL; - - if (fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) - return -EINVAL; - - fse->min_width = ov5645_mode_info_data[fse->index].width; - fse->max_width = ov5645_mode_info_data[fse->index].width; - fse->min_height = ov5645_mode_info_data[fse->index].height; - fse->max_height = ov5645_mode_info_data[fse->index].height; + if (fse->pad == OV5645_PAD_IMAGE) { + if (fse->code != OV5645_NATIVE_FORMAT || fse->index > 0) + return -EINVAL; + + fse->min_width = OV5645_NATIVE_WIDTH; + fse->max_width = OV5645_NATIVE_WIDTH; + fse->min_height = OV5645_NATIVE_HEIGHT; + fse->max_height = OV5645_NATIVE_HEIGHT; + } else { + if (fse->code != MEDIA_BUS_FMT_UYVY8_1X16 || + fse->index >= ARRAY_SIZE(ov5645_mode_info_data)) + return -EINVAL; + + fse->min_width = ov5645_mode_info_data[fse->index].width; + fse->max_width = ov5645_mode_info_data[fse->index].width; + fse->min_height = ov5645_mode_info_data[fse->index].height; + fse->max_height = ov5645_mode_info_data[fse->index].height; + } return 0; } @@ -855,18 +876,55 @@ static int ov5645_set_format(struct v4l2_subdev *sd, { struct ov5645 *ov5645 = to_ov5645(sd); struct v4l2_mbus_framefmt *__format; + struct v4l2_rect *compose; struct v4l2_rect *__crop; const struct ov5645_mode_info *new_mode; int ret; - __crop = v4l2_subdev_state_get_crop(sd_state, 0); + if (format->pad != OV5645_PAD_SOURCE) + return v4l2_subdev_get_fmt(sd, sd_state, format); + new_mode = v4l2_find_nearest_size(ov5645_mode_info_data, ARRAY_SIZE(ov5645_mode_info_data), width, height, format->format.width, format->format.height); - - __crop->width = new_mode->width; - __crop->height = new_mode->height; + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; + format->format.width = new_mode->width; + format->format.height = new_mode->height; + format->format.field = V4L2_FIELD_NONE; + format->format.colorspace = V4L2_COLORSPACE_SRGB; + format->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + format->format.quantization = V4L2_QUANTIZATION_DEFAULT; + format->format.xfer_func = V4L2_XFER_FUNC_DEFAULT; + + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_IMAGE); + *__format = format->format; + __format->code = OV5645_NATIVE_FORMAT; + __format->width = OV5645_NATIVE_WIDTH; + __format->height = OV5645_NATIVE_HEIGHT; + + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_IMAGE); + __crop->width = format->format.width; + __crop->height = format->format.height; + + /* + * The compose rectangle models binning, its size is the sensor output + * size. + */ + compose = v4l2_subdev_state_get_compose(sd_state, OV5645_PAD_IMAGE); + compose->left = 0; + compose->top = 0; + compose->width = format->format.width; + compose->height = format->format.height; + + __crop = v4l2_subdev_state_get_crop(sd_state, OV5645_PAD_SOURCE); + __crop->left = 0; + __crop->top = 0; + __crop->width = format->format.width; + __crop->height = format->format.height; + + __format = v4l2_subdev_state_get_format(sd_state, OV5645_PAD_SOURCE); + *__format = format->format; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { ret = __v4l2_ctrl_s_ctrl_int64(ov5645->pixel_clock, @@ -882,14 +940,6 @@ static int ov5645_set_format(struct v4l2_subdev *sd, ov5645->current_mode = new_mode; } - __format = v4l2_subdev_state_get_format(sd_state, 0); - __format->width = __crop->width; - __format->height = __crop->height; - __format->code = MEDIA_BUS_FMT_UYVY8_1X16; - __format->field = V4L2_FIELD_NONE; - __format->colorspace = V4L2_COLORSPACE_SRGB; - - format->format = *__format; return 0; } @@ -899,7 +949,7 @@ static int ov5645_init_state(struct v4l2_subdev *subdev, { struct v4l2_subdev_format fmt = { .which = V4L2_SUBDEV_FORMAT_TRY, - .pad = 0, + .pad = OV5645_PAD_SOURCE, .format = { .code = MEDIA_BUS_FMT_UYVY8_1X16, .width = ov5645_mode_info_data[1].width, @@ -919,7 +969,7 @@ static int ov5645_get_selection(struct v4l2_subdev *sd, if (sel->target != V4L2_SEL_TGT_CROP) return -EINVAL; - sel->r = *v4l2_subdev_state_get_crop(sd_state, 0); + sel->r = *v4l2_subdev_state_get_crop(sd_state, sel->pad); return 0; } @@ -1123,11 +1173,12 @@ static int ov5645_probe(struct i2c_client *client) v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); ov5645->sd.internal_ops = &ov5645_internal_ops; ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; - ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; + ov5645->pads[OV5645_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + ov5645->pads[OV5645_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL; ov5645->sd.dev = dev; ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; - ret = media_entity_pads_init(&ov5645->sd.entity, 1, &ov5645->pad); + ret = media_entity_pads_init(&ov5645->sd.entity, ARRAY_SIZE(ov5645->pads), ov5645->pads); if (ret < 0) { dev_err_probe(dev, ret, "could not register media entity\n"); goto free_ctrl;