| Message ID | 20240930052903.168881-7-victor.liu@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add ITE IT6263 LVDS to HDMI converter support | expand |
Hi, On Mon, Sep 30, 2024 at 01:29:01PM GMT, Liu Ying wrote: > Add basic HDMI video output support. Currently, only RGB888 output > pixel format is supported. At the LVDS input side, the driver > supports single LVDS link and dual LVDS links with "jeida-24" LVDS > mapping. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> Generally speaking, you need to use the new HDMI bridge infrastructure. There's a lot of required things you're not dealing with here (such as infoframes) Also, you should add a MAINTAINERS entry Maxime
On 09/30/2024, Maxime Ripard wrote: > Hi, Hi, > > On Mon, Sep 30, 2024 at 01:29:01PM GMT, Liu Ying wrote: >> Add basic HDMI video output support. Currently, only RGB888 output >> pixel format is supported. At the LVDS input side, the driver >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS >> mapping. >> >> Product link: >> https://www.ite.com.tw/en/product/cate1/IT6263 >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > > Generally speaking, you need to use the new HDMI bridge infrastructure. > There's a lot of required things you're not dealing with here (such as > infoframes) I'll add AVI infoframe support in the next version. My system doesn't wire up any audio line to IT6263, so I cannot add audio infoframe. I hope this is enough. > > Also, you should add a MAINTAINERS entry Ok, will add this. > > Maxime
Hi Liu, Thanks for the patch. > -----Original Message----- > From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> On Behalf Of Liu Ying > Sent: Monday, September 30, 2024 6:29 AM > Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the > LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS > mapping. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > drivers/gpu/drm/bridge/Kconfig | 8 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ite-it6263.c | 829 ++++++++++++++++++++++++++++ > 3 files changed, 838 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index > 3eb955333c80..93f99682a090 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > help > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > +config DRM_ITE_IT6263 > + tristate "ITE IT6263 LVDS/HDMI bridge" > + depends on OF > + select DRM_KMS_HELPER > + select REGMAP_I2C > + help > + ITE IT6263 LVDS to HDMI bridge chip driver. > + > config DRM_ITE_IT6505 > tristate "ITE IT6505 DisplayPort bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index > 7df87b582dca..f3776dd473fd 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git a/drivers/gpu/drm/bridge/ite-it6263.c > b/drivers/gpu/drm/bridge/ite-it6263.c > new file mode 100644 > index 000000000000..886588497bc1 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > @@ -0,0 +1,829 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2024 NXP > + */ > + > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/media-bus-format.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > +<drm/drm_edid.h> #include <drm/drm_of.h> #include > +<drm/drm_probe_helper.h> > + > +/* > +----------------------------------------------------------------------- > +------ > + * LVDS registers > + */ > + > +/* LVDS software reset registers */ > +#define LVDS_REG_05 0x05 > +#define REG_SOFT_P_RST BIT(1) > + > +/* LVDS system configuration registers */ > +/* 0x0b */ > +#define LVDS_REG_0B 0x0b > +#define REG_SSC_PCLK_RF BIT(0) > +#define REG_LVDS_IN_SWAP BIT(1) > + > +/* LVDS test pattern gen control registers */ > +/* 0x2c */ > +#define LVDS_REG_2C 0x2c > +#define REG_COL_DEP GENMASK(1, 0) > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > +#define OUT_MAP BIT(4) > +#define JEIDA 0 > +#define REG_DESSC_ENB BIT(6) > +#define DMODE BIT(7) > +#define DISO BIT(7) > +#define SISO 0 > + > +#define LVDS_REG_3C 0x3c > +#define LVDS_REG_3F 0x3f > +#define LVDS_REG_47 0x47 > +#define LVDS_REG_48 0x48 > +#define LVDS_REG_4F 0x4f > +#define LVDS_REG_52 0x52 > + > +/* > +----------------------------------------------------------------------- > +------ > + * HDMI registers are separated into three banks: > + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > + > +/* HDMI genernal registers */ > +#define HDMI_REG_SW_RST 0x04 > +#define SOFTREF_RST BIT(5) > +#define SOFTA_RST BIT(4) > +#define SOFTV_RST BIT(3) > +#define AUD_RST BIT(2) > +#define HDCP_RST BIT(0) > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > + AUD_RST | HDCP_RST) > + > +#define HDMI_REG_SYS_STATUS 0x0e > +#define HPDETECT BIT(6) > +#define TXVIDSTABLE BIT(4) > + > +#define HDMI_REG_BANK_CTRL 0x0f > +#define REG_BANK_SEL BIT(0) > + > +/* HDMI System DDC control registers */ > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > +#define MASTER_SEL_HOST BIT(0) > + > +#define HDMI_REG_DDC_HEADER 0x11 > + > +#define HDMI_REG_DDC_REQOFF 0x12 > +#define HDMI_REG_DDC_REQCOUNT 0x13 > +#define HDMI_REG_DDC_EDIDSEG 0x14 > + > +#define HDMI_REG_DDC_CMD 0x15 > +#define DDC_CMD_EDID_READ 0x3 > +#define DDC_CMD_FIFO_CLR 0x9 > + > +#define HDMI_REG_DDC_STATUS 0x16 > +#define DDC_DONE BIT(7) > +#define DDC_NOACK BIT(5) > +#define DDC_WAITBUS BIT(4) > +#define DDC_ARBILOSE BIT(3) > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > + > +#define HDMI_DDC_FIFO_BYTES 32 > +#define HDMI_REG_DDC_READFIFO 0x17 > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > +#define HDMI_REG_LVDS_PORT_EN 0x1e > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > + > +/* > +----------------------------------------------------------------------- > +------ > + * 2) HDMI register bank0: 0x30 ~ 0xff > + */ > + > +/* HDMI AFE registers */ > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > +#define AFE_DRV_PWD BIT(5) > +#define AFE_DRV_RST BIT(4) > + > +#define HDMI_REG_AFE_XP_CTRL 0x62 > +#define AFE_XP_GAINBIT BIT(7) > +#define AFE_XP_ER0 BIT(4) > +#define AFE_XP_RESETB BIT(3) > + > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > + > +#define HDMI_REG_AFE_IP_CTRL 0x64 > +#define AFE_IP_GAINBIT BIT(7) > +#define AFE_IP_ER0 BIT(3) > +#define AFE_IP_RESETB BIT(2) > + > +/* HDMI input data format registers */ > +#define HDMI_REG_INPUT_MODE 0x70 > +#define IN_RGB 0x00 > + > +/* HDMI general control registers */ > +#define HDMI_REG_HDMI_MODE 0xc0 > +#define TX_HDMI_MODE BIT(0) > + > +#define HDMI_REG_GCP 0xc1 > +#define AVMUTE BIT(0) > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > + > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > +#define ENABLE_PKT BIT(0) > +#define REPEAT_PKT BIT(1) > + > +/* > +----------------------------------------------------------------------- > +------ > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > + > +/* AVI packet registers */ > +#define HDMI_REG_AVI_DB1 0x158 > +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) > +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) > + > +#define MAX_PIXEL_CLOCK_KHZ 150000 > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > + > +struct it6263 { > + struct device *dev; > + struct i2c_client *hdmi_i2c; > + struct i2c_client *lvds_i2c; > + struct regmap *hdmi_regmap; > + struct regmap *lvds_regmap; > + struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > + struct drm_connector connector; > + struct gpio_desc *reset_gpio; > + bool lvds_dual_link; > + bool lvds_link12_swap; > +}; > + > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > +*bridge) { > + return container_of(bridge, struct it6263, bridge); } > + > +static inline struct it6263 *connector_to_it6263(struct drm_connector > +*conn) { > + return container_of(conn, struct it6263, connector); } > + > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_BANK_CTRL: > + case HDMI_REG_DDC_MASTER_CTRL: > + case HDMI_REG_DDC_HEADER: > + case HDMI_REG_DDC_REQOFF: > + case HDMI_REG_DDC_REQCOUNT: > + case HDMI_REG_DDC_EDIDSEG: > + case HDMI_REG_DDC_CMD: > + case HDMI_REG_LVDS_PORT: > + case HDMI_REG_LVDS_PORT_EN: > + case HDMI_REG_AFE_DRV_CTRL: > + case HDMI_REG_AFE_XP_CTRL: > + case HDMI_REG_AFE_ISW_CTRL: > + case HDMI_REG_AFE_IP_CTRL: > + case HDMI_REG_INPUT_MODE: > + case HDMI_REG_HDMI_MODE: > + case HDMI_REG_GCP: > + case HDMI_REG_PKT_GENERAL_CTRL: > + case HDMI_REG_AVI_DB1: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > +reg) { > + if (it6263_hdmi_writeable_reg(dev, reg)) > + return true; > + > + switch (reg) { > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > + .range_min = 0x00, > + .range_max = HDMI_REG_AVI_DB1, > + .selector_reg = HDMI_REG_BANK_CTRL, > + .selector_mask = REG_BANK_SEL, > + .selector_shift = 0, > + .window_start = 0x00, > + .window_len = 0x100, > +}; > + > +static const struct regmap_config it6263_hdmi_regmap_config = { > + .name = "it6263-hdmi", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_hdmi_writeable_reg, > + .readable_reg = it6263_hdmi_readable_reg, > + .volatile_reg = it6263_hdmi_volatile_reg, > + .max_register = HDMI_REG_AVI_DB1, > + .ranges = &it6263_hdmi_range_cfg, > + .num_ranges = 1, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case LVDS_REG_05: > + case LVDS_REG_0B: > + case LVDS_REG_2C: > + case LVDS_REG_3C: > + case LVDS_REG_3F: > + case LVDS_REG_47: > + case LVDS_REG_48: > + case LVDS_REG_4F: > + case LVDS_REG_52: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > +reg) { > + return it6263_lvds_writeable_reg(dev, reg); } > + > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > +reg) { > + return reg == LVDS_REG_05; > +} > + > +static const struct regmap_config it6263_lvds_regmap_config = { > + .name = "it6263-lvds", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_lvds_writeable_reg, > + .readable_reg = it6263_lvds_readable_reg, > + .volatile_reg = it6263_lvds_volatile_reg, > + .max_register = LVDS_REG_52, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static const char * const it6263_supplies[] = { > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > + "avcc", "anvdd", "apvdd" > +}; > + > +static int it6263_parse_dt(struct it6263 *it) { > + struct device *dev = it->dev; > + struct device_node *port0, *port1; > + int ret = 0; > + > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > + if (IS_ERR(it->next_bridge)) > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > + "failed to get next bridge\n"); > + > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > + if (port0 && port1) { > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > + it->lvds_dual_link = true; > + it->lvds_link12_swap = true; > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > + it->lvds_dual_link = true; > + } > + > + if (!it->lvds_dual_link) { > + dev_err(dev, > + "failed to get LVDS dual link pixel order\n"); > + ret = -EINVAL; > + } > + } else if (port1) { > + ret = -EINVAL; > + dev_err(dev, "single input LVDS port1 is not supported\n"); Are you supporting single input LVDS port0?? > + } else if (!port0) { > + ret = -EINVAL; > + dev_err(dev, "no input LVDS port\n"); > + } > + > + of_node_put(port0); > + of_node_put(port1); > + > + return ret; > +} > + > +static inline void it6263_reset(struct it6263 *it) { > + if (!it->reset_gpio) > + return; > + > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + fsleep(1000); > + gpiod_set_value_cansleep(it->reset_gpio, 1); > + /* The chip maker says the low pulse should be at least 40ms. */ > + fsleep(40000); > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + /* addtional time to wait the high voltage to be stable */ > + fsleep(5000); What about other resets ?? /* AFE PLL reset and pclk reset */ > +} > + > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > + int ret; > + > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > + if (ret) > + return ret; > + > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); } > + > +static inline void it6263_lvds_reset(struct it6263 *it) { > + /* AFE PLL reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > + > + /* software pixel clock domain reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > + REG_SOFT_P_RST); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > + fsleep(10000); > +} > + > +static inline void it6263_lvds_set_interface(struct it6263 *it) { > + /* color depth */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > + /* output mapping */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > + > + if (it->lvds_dual_link) { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > + } else { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > + } > +} > + > +static inline void it6263_lvds_set_afe(struct it6263 *it) { > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > + > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > + REG_SSC_PCLK_RF); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > + REG_DESSC_ENB); > +} > + > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > + > +static inline void it6263_lvds_config(struct it6263 *it) { > + it6263_lvds_reset(it); > + it6263_lvds_set_interface(it); > + it6263_lvds_set_afe(it); > + it6263_lvds_sys_cfg(it); > +} > + > +static inline void it6263_hdmi_config(struct it6263 *it) { > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > + HDMI_COLOR_DEPTH_24); > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, > + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } > + > +static enum drm_connector_status it6263_detect(struct it6263 *it) { > + unsigned int val; > + > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > + if (val & HPDETECT) > + return connector_status_connected; > + else > + return connector_status_disconnected; } > + > +static enum drm_connector_status > +it6263_connector_detect(struct drm_connector *connector, bool force) { > + struct it6263 *it = connector_to_it6263(connector); > + > + return it6263_detect(it); > +} > + > +static const struct drm_connector_funcs it6263_connector_funcs = { > + .detect = it6263_connector_detect, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > +size_t len) { > + struct it6263 *it = data; > + struct regmap *regmap = it->hdmi_regmap; > + unsigned int start = (block % 2) * EDID_LENGTH; > + unsigned int segment = block >> 1; > + unsigned int count, val; > + int ret; > + > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > + > + while (len) { > + /* clear DDC FIFO */ > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > + val, val & DDC_DONE, > + 2000, 10000); > + if (ret) { > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > + return ret; > + } > + > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > + > + /* fire the read command */ > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > + > + start += count; > + len -= count; > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > + val & (DDC_DONE | DDC_ERROR), > + 20000, 250000); > + if (ret && !(val & DDC_ERROR)) { > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > + return ret; > + } > + > + if (val & DDC_ERROR) { > + dev_err(it->dev, "DDC error\n"); > + return -EIO; > + } > + > + /* cache to buffer */ > + for (; count > 0; count--) { > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > + *(buf++) = val; > + } > + } > + > + return 0; > +} > + > +static int it6263_connector_get_modes(struct drm_connector *connector) > +{ > + struct it6263 *it = connector_to_it6263(connector); > + const struct drm_edid *drm_edid; > + int count; > + > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > + > + drm_edid_connector_update(connector, drm_edid); > + count = drm_edid_connector_add_modes(connector); > + > + drm_edid_free(drm_edid); > + > + return count; > +} > + > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > + .get_modes = it6263_connector_get_modes, }; > + > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) { > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > + > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > + > +static void > +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) { > + struct it6263 *it = bridge_to_it6263(bridge); > + > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > + AFE_DRV_RST | AFE_DRV_PWD); > +} > + > +static void > +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) { > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct it6263 *it = bridge_to_it6263(bridge); > + const struct drm_crtc_state *crtc_state; > + struct regmap *regmap = it->hdmi_regmap; > + const struct drm_display_mode *mode; > + struct drm_connector *connector; > + bool is_stable = false; > + struct drm_crtc *crtc; > + unsigned int val; > + bool pclk_high; > + int i, ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > + mode = &crtc_state->adjusted_mode; > + > + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > + > + /* HDMI AFE setup */ > + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_GAINBIT | AFE_XP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_ER0 | AFE_XP_RESETB); > + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_GAINBIT | AFE_IP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_ER0 | AFE_IP_RESETB); > + > + /* HDMI software video reset */ > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > + fsleep(1000); > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > + > + /* reconfigure LVDS and retry several times in case video is instable */ > + for (i = 0; i < 3; i++) { > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > + val & TXVIDSTABLE, > + 20000, 500000); > + if (!ret) { > + is_stable = true; > + break; > + } > + > + it6263_lvds_config(it); > + } > + > + if (!is_stable) > + dev_warn(it->dev, "failed to wait for video stable\n"); > + > + /* HDMI AFE reset release and power up */ > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > + > + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > + > + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > +REPEAT_PKT); } > + > +static enum drm_mode_status > +it6263_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) { > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; > +} > + > +static int it6263_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) { > + struct it6263 *it = bridge_to_it6263(bridge); > + int ret; > + > + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > + if (ret < 0) > + return ret; > + > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > + return 0; > + > + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > + DRM_CONNECTOR_POLL_DISCONNECT; > + > + ret = drm_connector_init(bridge->dev, &it->connector, > + &it6263_connector_funcs, > + DRM_MODE_CONNECTOR_HDMIA); > + if (ret) > + return ret; > + > + drm_connector_helper_add(&it->connector, > + &it6263_connector_helper_funcs); > + drm_connector_attach_encoder(&it->connector, bridge->encoder); > + > + return 0; > +} > + > +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge > +*bridge) { > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return it6263_detect(it); > +} > + > +static const struct drm_edid * > +it6263_bridge_edid_read(struct drm_bridge *bridge, > + struct drm_connector *connector) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return drm_edid_read_custom(connector, it6263_read_edid, it); } > + > +static u32 * > +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > + if (!input_fmts) { > + *num_input_fmts = 0; > + return NULL; > + } > + > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; Why is it hardcoded? What about supporting VESA?? > + *num_input_fmts = 1; > + > + return input_fmts; > +} > + > +static const struct drm_bridge_funcs it6263_bridge_funcs = { > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .attach = it6263_bridge_attach, > + .mode_valid = it6263_bridge_mode_valid, > + .atomic_disable = it6263_bridge_atomic_disable, > + .atomic_enable = it6263_bridge_atomic_enable, > + .atomic_check = it6263_bridge_atomic_check, > + .detect = it6263_bridge_detect, > + .edid_read = it6263_bridge_edid_read, > + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, > +}; > + > +static int it6263_probe(struct i2c_client *client) { > + struct device *dev = &client->dev; > + struct it6263 *it; > + int ret; > + > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > + if (!it) > + return -ENOMEM; > + > + it->dev = dev; > + it->hdmi_i2c = client; > + > + it->hdmi_regmap = devm_regmap_init_i2c(client, > + &it6263_hdmi_regmap_config); > + if (IS_ERR(it->hdmi_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > + "failed to init I2C regmap for HDMI\n"); > + > + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(it->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > + "failed to get reset gpio\n"); > + > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > + it6263_supplies); > + if (ret) > + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > + > + ret = it6263_parse_dt(it); > + if (ret) > + return ret; > + > + it6263_reset(it); > + > + ret = it6263_lvds_set_i2c_addr(it); > + if (ret) > + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > + > + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > + LVDS_INPUT_CTRL_I2C_ADDR); > + if (IS_ERR(it->lvds_i2c)) > + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > + "failed to allocate I2C device for LVDS\n"); Maybe use action_or_reset and call i2c_unregister_device(); > + > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > + &it6263_lvds_regmap_config); > + if (IS_ERR(it->lvds_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > + "failed to init I2C regmap for LVDS\n"); > + > + it6263_lvds_config(it); > + it6263_hdmi_config(it); > + > + i2c_set_clientdata(client, it); > + > + it->bridge.funcs = &it6263_bridge_funcs; > + it->bridge.of_node = dev->of_node; > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ?? > + drm_bridge_add(&it->bridge); > + > + return 0; > +} > + > +static void it6263_remove(struct i2c_client *client) { > + struct it6263 *it = i2c_get_clientdata(client); > + > + drm_bridge_remove(&it->bridge); > +} > + > +static const struct of_device_id it6263_of_match[] = { > + { .compatible = "ite,it6263", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, it6263_of_match); > + > +static const struct i2c_device_id it6263_i2c_ids[] = { > + { "it6263", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > + > +static struct i2c_driver it6263_driver = { > + .probe = it6263_probe, > + .remove = it6263_remove, > + .driver = { > + .name = "it6263", > + .of_match_table = it6263_of_match, > + }, > + .id_table = it6263_i2c_ids, > +}; > +module_i2c_driver(it6263_driver); > + > +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); MODULE_LICENSE("GPL"); > -- > 2.34.1 >
On 09/30/2024, Biju Das wrote: > Hi Liu, Hi Biju, > > Thanks for the patch. > >> -----Original Message----- >> From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> On Behalf Of Liu Ying >> Sent: Monday, September 30, 2024 6:29 AM >> Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter >> >> Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the >> LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS >> mapping. >> >> Product link: >> https://www.ite.com.tw/en/product/cate1/IT6263 >> >> Signed-off-by: Liu Ying <victor.liu@nxp.com> >> --- >> drivers/gpu/drm/bridge/Kconfig | 8 + >> drivers/gpu/drm/bridge/Makefile | 1 + >> drivers/gpu/drm/bridge/ite-it6263.c | 829 ++++++++++++++++++++++++++++ >> 3 files changed, 838 insertions(+) >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >> >> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index >> 3eb955333c80..93f99682a090 100644 >> --- a/drivers/gpu/drm/bridge/Kconfig >> +++ b/drivers/gpu/drm/bridge/Kconfig >> @@ -90,6 +90,14 @@ config DRM_FSL_LDB >> help >> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. >> >> +config DRM_ITE_IT6263 >> + tristate "ITE IT6263 LVDS/HDMI bridge" >> + depends on OF >> + select DRM_KMS_HELPER >> + select REGMAP_I2C >> + help >> + ITE IT6263 LVDS to HDMI bridge chip driver. >> + >> config DRM_ITE_IT6505 >> tristate "ITE IT6505 DisplayPort bridge" >> depends on OF >> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index >> 7df87b582dca..f3776dd473fd 100644 >> --- a/drivers/gpu/drm/bridge/Makefile >> +++ b/drivers/gpu/drm/bridge/Makefile >> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o >> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o >> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o >> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o >> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o >> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o >> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o >> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git a/drivers/gpu/drm/bridge/ite-it6263.c >> b/drivers/gpu/drm/bridge/ite-it6263.c >> new file mode 100644 >> index 000000000000..886588497bc1 >> --- /dev/null >> +++ b/drivers/gpu/drm/bridge/ite-it6263.c >> @@ -0,0 +1,829 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright 2024 NXP >> + */ >> + >> +#include <linux/bitfield.h> >> +#include <linux/bits.h> >> +#include <linux/delay.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/i2c.h> >> +#include <linux/media-bus-format.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> + >> +#include <drm/drm_atomic.h> >> +#include <drm/drm_atomic_helper.h> >> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> >> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include >> +<drm/drm_edid.h> #include <drm/drm_of.h> #include >> +<drm/drm_probe_helper.h> >> + >> +/* >> +----------------------------------------------------------------------- >> +------ >> + * LVDS registers >> + */ >> + >> +/* LVDS software reset registers */ >> +#define LVDS_REG_05 0x05 >> +#define REG_SOFT_P_RST BIT(1) >> + >> +/* LVDS system configuration registers */ >> +/* 0x0b */ >> +#define LVDS_REG_0B 0x0b >> +#define REG_SSC_PCLK_RF BIT(0) >> +#define REG_LVDS_IN_SWAP BIT(1) >> + >> +/* LVDS test pattern gen control registers */ >> +/* 0x2c */ >> +#define LVDS_REG_2C 0x2c >> +#define REG_COL_DEP GENMASK(1, 0) >> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) >> +#define OUT_MAP BIT(4) >> +#define JEIDA 0 >> +#define REG_DESSC_ENB BIT(6) >> +#define DMODE BIT(7) >> +#define DISO BIT(7) >> +#define SISO 0 >> + >> +#define LVDS_REG_3C 0x3c >> +#define LVDS_REG_3F 0x3f >> +#define LVDS_REG_47 0x47 >> +#define LVDS_REG_48 0x48 >> +#define LVDS_REG_4F 0x4f >> +#define LVDS_REG_52 0x52 >> + >> +/* >> +----------------------------------------------------------------------- >> +------ >> + * HDMI registers are separated into three banks: >> + * 1) HDMI register common bank: 0x00 ~ 0x2f */ >> + >> +/* HDMI genernal registers */ >> +#define HDMI_REG_SW_RST 0x04 >> +#define SOFTREF_RST BIT(5) >> +#define SOFTA_RST BIT(4) >> +#define SOFTV_RST BIT(3) >> +#define AUD_RST BIT(2) >> +#define HDCP_RST BIT(0) >> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ >> + AUD_RST | HDCP_RST) >> + >> +#define HDMI_REG_SYS_STATUS 0x0e >> +#define HPDETECT BIT(6) >> +#define TXVIDSTABLE BIT(4) >> + >> +#define HDMI_REG_BANK_CTRL 0x0f >> +#define REG_BANK_SEL BIT(0) >> + >> +/* HDMI System DDC control registers */ >> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 >> +#define MASTER_SEL_HOST BIT(0) >> + >> +#define HDMI_REG_DDC_HEADER 0x11 >> + >> +#define HDMI_REG_DDC_REQOFF 0x12 >> +#define HDMI_REG_DDC_REQCOUNT 0x13 >> +#define HDMI_REG_DDC_EDIDSEG 0x14 >> + >> +#define HDMI_REG_DDC_CMD 0x15 >> +#define DDC_CMD_EDID_READ 0x3 >> +#define DDC_CMD_FIFO_CLR 0x9 >> + >> +#define HDMI_REG_DDC_STATUS 0x16 >> +#define DDC_DONE BIT(7) >> +#define DDC_NOACK BIT(5) >> +#define DDC_WAITBUS BIT(4) >> +#define DDC_ARBILOSE BIT(3) >> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) >> + >> +#define HDMI_DDC_FIFO_BYTES 32 >> +#define HDMI_REG_DDC_READFIFO 0x17 >> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ >> +#define HDMI_REG_LVDS_PORT_EN 0x1e >> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 >> + >> +/* >> +----------------------------------------------------------------------- >> +------ >> + * 2) HDMI register bank0: 0x30 ~ 0xff >> + */ >> + >> +/* HDMI AFE registers */ >> +#define HDMI_REG_AFE_DRV_CTRL 0x61 >> +#define AFE_DRV_PWD BIT(5) >> +#define AFE_DRV_RST BIT(4) >> + >> +#define HDMI_REG_AFE_XP_CTRL 0x62 >> +#define AFE_XP_GAINBIT BIT(7) >> +#define AFE_XP_ER0 BIT(4) >> +#define AFE_XP_RESETB BIT(3) >> + >> +#define HDMI_REG_AFE_ISW_CTRL 0x63 >> + >> +#define HDMI_REG_AFE_IP_CTRL 0x64 >> +#define AFE_IP_GAINBIT BIT(7) >> +#define AFE_IP_ER0 BIT(3) >> +#define AFE_IP_RESETB BIT(2) >> + >> +/* HDMI input data format registers */ >> +#define HDMI_REG_INPUT_MODE 0x70 >> +#define IN_RGB 0x00 >> + >> +/* HDMI general control registers */ >> +#define HDMI_REG_HDMI_MODE 0xc0 >> +#define TX_HDMI_MODE BIT(0) >> + >> +#define HDMI_REG_GCP 0xc1 >> +#define AVMUTE BIT(0) >> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) >> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) >> + >> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 >> +#define ENABLE_PKT BIT(0) >> +#define REPEAT_PKT BIT(1) >> + >> +/* >> +----------------------------------------------------------------------- >> +------ >> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ >> + >> +/* AVI packet registers */ >> +#define HDMI_REG_AVI_DB1 0x158 >> +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) >> +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) >> + >> +#define MAX_PIXEL_CLOCK_KHZ 150000 >> +#define HIGH_PIXEL_CLOCK_KHZ 80000 >> + >> +struct it6263 { >> + struct device *dev; >> + struct i2c_client *hdmi_i2c; >> + struct i2c_client *lvds_i2c; >> + struct regmap *hdmi_regmap; >> + struct regmap *lvds_regmap; >> + struct drm_bridge bridge; >> + struct drm_bridge *next_bridge; >> + struct drm_connector connector; >> + struct gpio_desc *reset_gpio; >> + bool lvds_dual_link; >> + bool lvds_link12_swap; >> +}; >> + >> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge >> +*bridge) { >> + return container_of(bridge, struct it6263, bridge); } >> + >> +static inline struct it6263 *connector_to_it6263(struct drm_connector >> +*conn) { >> + return container_of(conn, struct it6263, connector); } >> + >> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int >> +reg) { >> + switch (reg) { >> + case HDMI_REG_SW_RST: >> + case HDMI_REG_BANK_CTRL: >> + case HDMI_REG_DDC_MASTER_CTRL: >> + case HDMI_REG_DDC_HEADER: >> + case HDMI_REG_DDC_REQOFF: >> + case HDMI_REG_DDC_REQCOUNT: >> + case HDMI_REG_DDC_EDIDSEG: >> + case HDMI_REG_DDC_CMD: >> + case HDMI_REG_LVDS_PORT: >> + case HDMI_REG_LVDS_PORT_EN: >> + case HDMI_REG_AFE_DRV_CTRL: >> + case HDMI_REG_AFE_XP_CTRL: >> + case HDMI_REG_AFE_ISW_CTRL: >> + case HDMI_REG_AFE_IP_CTRL: >> + case HDMI_REG_INPUT_MODE: >> + case HDMI_REG_HDMI_MODE: >> + case HDMI_REG_GCP: >> + case HDMI_REG_PKT_GENERAL_CTRL: >> + case HDMI_REG_AVI_DB1: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int >> +reg) { >> + if (it6263_hdmi_writeable_reg(dev, reg)) >> + return true; >> + >> + switch (reg) { >> + case HDMI_REG_SYS_STATUS: >> + case HDMI_REG_DDC_STATUS: >> + case HDMI_REG_DDC_READFIFO: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int >> +reg) { >> + switch (reg) { >> + case HDMI_REG_SW_RST: >> + case HDMI_REG_SYS_STATUS: >> + case HDMI_REG_DDC_STATUS: >> + case HDMI_REG_DDC_READFIFO: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { >> + .range_min = 0x00, >> + .range_max = HDMI_REG_AVI_DB1, >> + .selector_reg = HDMI_REG_BANK_CTRL, >> + .selector_mask = REG_BANK_SEL, >> + .selector_shift = 0, >> + .window_start = 0x00, >> + .window_len = 0x100, >> +}; >> + >> +static const struct regmap_config it6263_hdmi_regmap_config = { >> + .name = "it6263-hdmi", >> + .reg_bits = 8, >> + .val_bits = 8, >> + .writeable_reg = it6263_hdmi_writeable_reg, >> + .readable_reg = it6263_hdmi_readable_reg, >> + .volatile_reg = it6263_hdmi_volatile_reg, >> + .max_register = HDMI_REG_AVI_DB1, >> + .ranges = &it6263_hdmi_range_cfg, >> + .num_ranges = 1, >> + .cache_type = REGCACHE_MAPLE, >> +}; >> + >> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int >> +reg) { >> + switch (reg) { >> + case LVDS_REG_05: >> + case LVDS_REG_0B: >> + case LVDS_REG_2C: >> + case LVDS_REG_3C: >> + case LVDS_REG_3F: >> + case LVDS_REG_47: >> + case LVDS_REG_48: >> + case LVDS_REG_4F: >> + case LVDS_REG_52: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int >> +reg) { >> + return it6263_lvds_writeable_reg(dev, reg); } >> + >> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int >> +reg) { >> + return reg == LVDS_REG_05; >> +} >> + >> +static const struct regmap_config it6263_lvds_regmap_config = { >> + .name = "it6263-lvds", >> + .reg_bits = 8, >> + .val_bits = 8, >> + .writeable_reg = it6263_lvds_writeable_reg, >> + .readable_reg = it6263_lvds_readable_reg, >> + .volatile_reg = it6263_lvds_volatile_reg, >> + .max_register = LVDS_REG_52, >> + .cache_type = REGCACHE_MAPLE, >> +}; >> + >> +static const char * const it6263_supplies[] = { >> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", >> + "avcc", "anvdd", "apvdd" >> +}; >> + >> +static int it6263_parse_dt(struct it6263 *it) { >> + struct device *dev = it->dev; >> + struct device_node *port0, *port1; >> + int ret = 0; >> + >> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >> + if (IS_ERR(it->next_bridge)) >> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >> + "failed to get next bridge\n"); >> + >> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >> + if (port0 && port1) { >> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >> + it->lvds_dual_link = true; >> + it->lvds_link12_swap = true; >> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >> + it->lvds_dual_link = true; >> + } >> + >> + if (!it->lvds_dual_link) { >> + dev_err(dev, >> + "failed to get LVDS dual link pixel order\n"); >> + ret = -EINVAL; >> + } >> + } else if (port1) { >> + ret = -EINVAL; >> + dev_err(dev, "single input LVDS port1 is not supported\n"); > > Are you supporting single input LVDS port0?? > >> + } else if (!port0) { >> + ret = -EINVAL; >> + dev_err(dev, "no input LVDS port\n"); >> + } >> + >> + of_node_put(port0); >> + of_node_put(port1); >> + >> + return ret; >> +} >> + >> +static inline void it6263_reset(struct it6263 *it) { >> + if (!it->reset_gpio) >> + return; >> + >> + gpiod_set_value_cansleep(it->reset_gpio, 0); >> + fsleep(1000); >> + gpiod_set_value_cansleep(it->reset_gpio, 1); >> + /* The chip maker says the low pulse should be at least 40ms. */ >> + fsleep(40000); >> + gpiod_set_value_cansleep(it->reset_gpio, 0); >> + /* addtional time to wait the high voltage to be stable */ >> + fsleep(5000); > > What about other resets ?? > > /* AFE PLL reset and pclk reset */ > >> +} >> + >> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { >> + int ret; >> + >> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, >> + LVDS_INPUT_CTRL_I2C_ADDR << 1); >> + if (ret) >> + return ret; >> + >> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); } >> + >> +static inline void it6263_lvds_reset(struct it6263 *it) { >> + /* AFE PLL reset */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); >> + fsleep(1000); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); >> + >> + /* software pixel clock domain reset */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, >> + REG_SOFT_P_RST); >> + fsleep(1000); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); >> + fsleep(10000); >> +} >> + >> +static inline void it6263_lvds_set_interface(struct it6263 *it) { >> + /* color depth */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); >> + /* output mapping */ >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); >> + >> + if (it->lvds_dual_link) { >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); >> + } else { >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); >> + } >> +} >> + >> +static inline void it6263_lvds_set_afe(struct it6263 *it) { >> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); >> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); >> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); >> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); >> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); >> + >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, >> + REG_SSC_PCLK_RF); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, >> + REG_DESSC_ENB); >> +} >> + >> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { >> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, >> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } >> + >> +static inline void it6263_lvds_config(struct it6263 *it) { >> + it6263_lvds_reset(it); >> + it6263_lvds_set_interface(it); >> + it6263_lvds_set_afe(it); >> + it6263_lvds_sys_cfg(it); >> +} >> + >> +static inline void it6263_hdmi_config(struct it6263 *it) { >> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); >> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, >> + HDMI_COLOR_DEPTH_24); >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, >> + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } >> + >> +static enum drm_connector_status it6263_detect(struct it6263 *it) { >> + unsigned int val; >> + >> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); >> + if (val & HPDETECT) >> + return connector_status_connected; >> + else >> + return connector_status_disconnected; } >> + >> +static enum drm_connector_status >> +it6263_connector_detect(struct drm_connector *connector, bool force) { >> + struct it6263 *it = connector_to_it6263(connector); >> + >> + return it6263_detect(it); >> +} >> + >> +static const struct drm_connector_funcs it6263_connector_funcs = { >> + .detect = it6263_connector_detect, >> + .fill_modes = drm_helper_probe_single_connector_modes, >> + .destroy = drm_connector_cleanup, >> + .reset = drm_atomic_helper_connector_reset, >> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, >> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, >> +}; >> + >> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, >> +size_t len) { >> + struct it6263 *it = data; >> + struct regmap *regmap = it->hdmi_regmap; >> + unsigned int start = (block % 2) * EDID_LENGTH; >> + unsigned int segment = block >> 1; >> + unsigned int count, val; >> + int ret; >> + >> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); >> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); >> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); >> + >> + while (len) { >> + /* clear DDC FIFO */ >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); >> + >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, >> + val, val & DDC_DONE, >> + 2000, 10000); >> + if (ret) { >> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); >> + return ret; >> + } >> + >> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; >> + >> + /* fire the read command */ >> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); >> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); >> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); >> + >> + start += count; >> + len -= count; >> + >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, >> + val & (DDC_DONE | DDC_ERROR), >> + 20000, 250000); >> + if (ret && !(val & DDC_ERROR)) { >> + dev_err(it->dev, "failed to read EDID:%d\n", ret); >> + return ret; >> + } >> + >> + if (val & DDC_ERROR) { >> + dev_err(it->dev, "DDC error\n"); >> + return -EIO; >> + } >> + >> + /* cache to buffer */ >> + for (; count > 0; count--) { >> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); >> + *(buf++) = val; >> + } >> + } >> + >> + return 0; >> +} >> + >> +static int it6263_connector_get_modes(struct drm_connector *connector) >> +{ >> + struct it6263 *it = connector_to_it6263(connector); >> + const struct drm_edid *drm_edid; >> + int count; >> + >> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); >> + >> + drm_edid_connector_update(connector, drm_edid); >> + count = drm_edid_connector_add_modes(connector); >> + >> + drm_edid_free(drm_edid); >> + >> + return count; >> +} >> + >> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { >> + .get_modes = it6263_connector_get_modes, }; >> + >> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, >> + struct drm_bridge_state *bridge_state, >> + struct drm_crtc_state *crtc_state, >> + struct drm_connector_state *conn_state) { >> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; >> + >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } >> + >> +static void >> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, >> + struct drm_bridge_state *old_bridge_state) { >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); >> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); >> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, >> + AFE_DRV_RST | AFE_DRV_PWD); >> +} >> + >> +static void >> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, >> + struct drm_bridge_state *old_bridge_state) { >> + struct drm_atomic_state *state = old_bridge_state->base.state; >> + struct it6263 *it = bridge_to_it6263(bridge); >> + const struct drm_crtc_state *crtc_state; >> + struct regmap *regmap = it->hdmi_regmap; >> + const struct drm_display_mode *mode; >> + struct drm_connector *connector; >> + bool is_stable = false; >> + struct drm_crtc *crtc; >> + unsigned int val; >> + bool pclk_high; >> + int i, ret; >> + >> + connector = drm_atomic_get_new_connector_for_encoder(state, >> + bridge->encoder); >> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; >> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); >> + mode = &crtc_state->adjusted_mode; >> + >> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); >> + >> + /* HDMI AFE setup */ >> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); >> + if (pclk_high) >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >> + AFE_XP_GAINBIT | AFE_XP_RESETB); >> + else >> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >> + AFE_XP_ER0 | AFE_XP_RESETB); >> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); >> + if (pclk_high) >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >> + AFE_IP_GAINBIT | AFE_IP_RESETB); >> + else >> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >> + AFE_IP_ER0 | AFE_IP_RESETB); >> + >> + /* HDMI software video reset */ >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); >> + fsleep(1000); >> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); >> + >> + /* reconfigure LVDS and retry several times in case video is instable */ >> + for (i = 0; i < 3; i++) { >> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, >> + val & TXVIDSTABLE, >> + 20000, 500000); >> + if (!ret) { >> + is_stable = true; >> + break; >> + } >> + >> + it6263_lvds_config(it); >> + } >> + >> + if (!is_stable) >> + dev_warn(it->dev, "failed to wait for video stable\n"); >> + >> + /* HDMI AFE reset release and power up */ >> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); >> + >> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); >> + >> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | >> +REPEAT_PKT); } >> + >> +static enum drm_mode_status >> +it6263_bridge_mode_valid(struct drm_bridge *bridge, >> + const struct drm_display_info *info, >> + const struct drm_display_mode *mode) { >> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; >> +} >> + >> +static int it6263_bridge_attach(struct drm_bridge *bridge, >> + enum drm_bridge_attach_flags flags) { >> + struct it6263 *it = bridge_to_it6263(bridge); >> + int ret; >> + >> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, >> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); >> + if (ret < 0) >> + return ret; >> + >> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >> + return 0; >> + >> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | >> + DRM_CONNECTOR_POLL_DISCONNECT; >> + >> + ret = drm_connector_init(bridge->dev, &it->connector, >> + &it6263_connector_funcs, >> + DRM_MODE_CONNECTOR_HDMIA); >> + if (ret) >> + return ret; >> + >> + drm_connector_helper_add(&it->connector, >> + &it6263_connector_helper_funcs); >> + drm_connector_attach_encoder(&it->connector, bridge->encoder); >> + >> + return 0; >> +} >> + >> +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge >> +*bridge) { >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + return it6263_detect(it); >> +} >> + >> +static const struct drm_edid * >> +it6263_bridge_edid_read(struct drm_bridge *bridge, >> + struct drm_connector *connector) >> +{ >> + struct it6263 *it = bridge_to_it6263(bridge); >> + >> + return drm_edid_read_custom(connector, it6263_read_edid, it); } >> + >> +static u32 * >> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, >> + struct drm_bridge_state *bridge_state, >> + struct drm_crtc_state *crtc_state, >> + struct drm_connector_state *conn_state, >> + u32 output_fmt, >> + unsigned int *num_input_fmts) >> +{ >> + u32 *input_fmts; >> + >> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); >> + if (!input_fmts) { >> + *num_input_fmts = 0; >> + return NULL; >> + } >> + >> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > > Why is it hardcoded? What about supporting VESA?? > >> + *num_input_fmts = 1; >> + >> + return input_fmts; >> +} >> + >> +static const struct drm_bridge_funcs it6263_bridge_funcs = { >> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, >> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, >> + .atomic_reset = drm_atomic_helper_bridge_reset, >> + .attach = it6263_bridge_attach, >> + .mode_valid = it6263_bridge_mode_valid, >> + .atomic_disable = it6263_bridge_atomic_disable, >> + .atomic_enable = it6263_bridge_atomic_enable, >> + .atomic_check = it6263_bridge_atomic_check, >> + .detect = it6263_bridge_detect, >> + .edid_read = it6263_bridge_edid_read, >> + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, >> +}; >> + >> +static int it6263_probe(struct i2c_client *client) { >> + struct device *dev = &client->dev; >> + struct it6263 *it; >> + int ret; >> + >> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); >> + if (!it) >> + return -ENOMEM; >> + >> + it->dev = dev; >> + it->hdmi_i2c = client; >> + >> + it->hdmi_regmap = devm_regmap_init_i2c(client, >> + &it6263_hdmi_regmap_config); >> + if (IS_ERR(it->hdmi_regmap)) >> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), >> + "failed to init I2C regmap for HDMI\n"); >> + >> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(it->reset_gpio)) >> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), >> + "failed to get reset gpio\n"); >> + >> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), >> + it6263_supplies); >> + if (ret) >> + return dev_err_probe(dev, ret, "failed to get power supplies\n"); >> + >> + ret = it6263_parse_dt(it); >> + if (ret) >> + return ret; >> + >> + it6263_reset(it); >> + >> + ret = it6263_lvds_set_i2c_addr(it); >> + if (ret) >> + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); >> + >> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, >> + LVDS_INPUT_CTRL_I2C_ADDR); >> + if (IS_ERR(it->lvds_i2c)) >> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), >> + "failed to allocate I2C device for LVDS\n"); > > Maybe use action_or_reset and call i2c_unregister_device(); devm_i2c_new_dummy_device() is called here. It is a dev managed function call. Action devm_i2c_release_dummy() is added in it already. > >> + >> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, >> + &it6263_lvds_regmap_config); >> + if (IS_ERR(it->lvds_regmap)) >> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), >> + "failed to init I2C regmap for LVDS\n"); > >> + >> + it6263_lvds_config(it); >> + it6263_hdmi_config(it); > >> + >> + i2c_set_clientdata(client, it); >> + >> + it->bridge.funcs = &it6263_bridge_funcs; >> + it->bridge.of_node = dev->of_node; >> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ?? Will add this. Thanks. > >> + drm_bridge_add(&it->bridge); >> + >> + return 0; >> +} >> + >> +static void it6263_remove(struct i2c_client *client) { >> + struct it6263 *it = i2c_get_clientdata(client); >> + >> + drm_bridge_remove(&it->bridge); > >> +} >> + >> +static const struct of_device_id it6263_of_match[] = { >> + { .compatible = "ite,it6263", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, it6263_of_match); >> + >> +static const struct i2c_device_id it6263_i2c_ids[] = { >> + { "it6263", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); >> + >> +static struct i2c_driver it6263_driver = { >> + .probe = it6263_probe, >> + .remove = it6263_remove, >> + .driver = { >> + .name = "it6263", >> + .of_match_table = it6263_of_match, >> + }, >> + .id_table = it6263_i2c_ids, >> +}; >> +module_i2c_driver(it6263_driver); >> + >> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); >> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); MODULE_LICENSE("GPL"); >> -- >> 2.34.1 >> >
Hi Liu, > -----Original Message----- > From: Liu Ying <victor.liu@nxp.com> > Sent: Monday, September 30, 2024 10:40 AM > Subject: Re: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > On 09/30/2024, Biju Das wrote: > > Hi Liu, > > Hi Biju, > > > > > Thanks for the patch. > > > >> -----Original Message----- > >> From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> > >> On Behalf Of Liu Ying > >> Sent: Monday, September 30, 2024 6:29 AM > >> Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI > >> converter > >> > >> Add basic HDMI video output support. Currently, only RGB888 output > >> pixel format is supported. At the LVDS input side, the driver > >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. > >> > >> Product link: > >> https://www.ite.com.tw/en/product/cate1/IT6263 > >> > >> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >> --- > >> drivers/gpu/drm/bridge/Kconfig | 8 + > >> drivers/gpu/drm/bridge/Makefile | 1 + > >> drivers/gpu/drm/bridge/ite-it6263.c | 829 > >> ++++++++++++++++++++++++++++ > >> 3 files changed, 838 insertions(+) > >> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >> > >> diff --git a/drivers/gpu/drm/bridge/Kconfig > >> + > >> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > >> + LVDS_INPUT_CTRL_I2C_ADDR); > >> + if (IS_ERR(it->lvds_i2c)) > >> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > >> + "failed to allocate I2C device for LVDS\n"); > > > > Maybe use action_or_reset and call i2c_unregister_device(); > > devm_i2c_new_dummy_device() is called here. It is a dev managed function call. Action > devm_i2c_release_dummy() is added in it already. Oops. I missed that. Cheers, Biju
Hi Liu, > -----Original Message----- > From: Biju Das > Sent: Monday, September 30, 2024 10:16 AM > Subject: RE: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > Hi Liu, > > Thanks for the patch. > > > -----Original Message----- > > From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> > > On Behalf Of Liu Ying > > Sent: Monday, September 30, 2024 6:29 AM > > Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > > > Add basic HDMI video output support. Currently, only RGB888 output > > pixel format is supported. At the LVDS input side, the driver > > supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. > > > > Product link: > > https://www.ite.com.tw/en/product/cate1/IT6263 > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > drivers/gpu/drm/bridge/Kconfig | 8 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/ite-it6263.c | 829 > > ++++++++++++++++++++++++++++ > > 3 files changed, 838 insertions(+) > > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig > > b/drivers/gpu/drm/bridge/Kconfig index > > 3eb955333c80..93f99682a090 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > > help > > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > > > +config DRM_ITE_IT6263 > > + tristate "ITE IT6263 LVDS/HDMI bridge" > > + depends on OF > > + select DRM_KMS_HELPER > > + select REGMAP_I2C > > + help > > + ITE IT6263 LVDS to HDMI bridge chip driver. > > + > > config DRM_ITE_IT6505 > > tristate "ITE IT6505 DisplayPort bridge" > > depends on OF > > diff --git a/drivers/gpu/drm/bridge/Makefile > > b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > > 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > > a/drivers/gpu/drm/bridge/ite-it6263.c > > b/drivers/gpu/drm/bridge/ite-it6263.c > > new file mode 100644 > > index 000000000000..886588497bc1 > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > > @@ -0,0 +1,829 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright 2024 NXP > > + */ > > + > > +#include <linux/bitfield.h> > > +#include <linux/bits.h> > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/media-bus-format.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/regmap.h> > > +#include <linux/regulator/consumer.h> > > + > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > > +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > > +<drm/drm_edid.h> #include <drm/drm_of.h> #include > > +<drm/drm_probe_helper.h> > > + > > +/* > > +--------------------------------------------------------------------- > > +-- > > +------ > > + * LVDS registers > > + */ > > + > > +/* LVDS software reset registers */ > > +#define LVDS_REG_05 0x05 > > +#define REG_SOFT_P_RST BIT(1) > > + > > +/* LVDS system configuration registers */ > > +/* 0x0b */ > > +#define LVDS_REG_0B 0x0b > > +#define REG_SSC_PCLK_RF BIT(0) > > +#define REG_LVDS_IN_SWAP BIT(1) > > + > > +/* LVDS test pattern gen control registers */ > > +/* 0x2c */ > > +#define LVDS_REG_2C 0x2c > > +#define REG_COL_DEP GENMASK(1, 0) > > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > > +#define OUT_MAP BIT(4) > > +#define JEIDA 0 > > +#define REG_DESSC_ENB BIT(6) > > +#define DMODE BIT(7) > > +#define DISO BIT(7) > > +#define SISO 0 > > + > > +#define LVDS_REG_3C 0x3c > > +#define LVDS_REG_3F 0x3f > > +#define LVDS_REG_47 0x47 > > +#define LVDS_REG_48 0x48 > > +#define LVDS_REG_4F 0x4f > > +#define LVDS_REG_52 0x52 > > + > > +/* > > +--------------------------------------------------------------------- > > +-- > > +------ > > + * HDMI registers are separated into three banks: > > + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > > + > > +/* HDMI genernal registers */ > > +#define HDMI_REG_SW_RST 0x04 > > +#define SOFTREF_RST BIT(5) > > +#define SOFTA_RST BIT(4) > > +#define SOFTV_RST BIT(3) > > +#define AUD_RST BIT(2) > > +#define HDCP_RST BIT(0) > > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > > + AUD_RST | HDCP_RST) > > + > > +#define HDMI_REG_SYS_STATUS 0x0e > > +#define HPDETECT BIT(6) > > +#define TXVIDSTABLE BIT(4) > > + > > +#define HDMI_REG_BANK_CTRL 0x0f > > +#define REG_BANK_SEL BIT(0) > > + > > +/* HDMI System DDC control registers */ > > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > > +#define MASTER_SEL_HOST BIT(0) > > + > > +#define HDMI_REG_DDC_HEADER 0x11 > > + > > +#define HDMI_REG_DDC_REQOFF 0x12 > > +#define HDMI_REG_DDC_REQCOUNT 0x13 > > +#define HDMI_REG_DDC_EDIDSEG 0x14 > > + > > +#define HDMI_REG_DDC_CMD 0x15 > > +#define DDC_CMD_EDID_READ 0x3 > > +#define DDC_CMD_FIFO_CLR 0x9 > > + > > +#define HDMI_REG_DDC_STATUS 0x16 > > +#define DDC_DONE BIT(7) > > +#define DDC_NOACK BIT(5) > > +#define DDC_WAITBUS BIT(4) > > +#define DDC_ARBILOSE BIT(3) > > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > > + > > +#define HDMI_DDC_FIFO_BYTES 32 > > +#define HDMI_REG_DDC_READFIFO 0x17 > > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > > +#define HDMI_REG_LVDS_PORT_EN 0x1e > > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > > + > > +/* > > +--------------------------------------------------------------------- > > +-- > > +------ > > + * 2) HDMI register bank0: 0x30 ~ 0xff */ > > + > > +/* HDMI AFE registers */ > > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > > +#define AFE_DRV_PWD BIT(5) > > +#define AFE_DRV_RST BIT(4) > > + > > +#define HDMI_REG_AFE_XP_CTRL 0x62 > > +#define AFE_XP_GAINBIT BIT(7) > > +#define AFE_XP_ER0 BIT(4) > > +#define AFE_XP_RESETB BIT(3) > > + > > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > > + > > +#define HDMI_REG_AFE_IP_CTRL 0x64 > > +#define AFE_IP_GAINBIT BIT(7) > > +#define AFE_IP_ER0 BIT(3) > > +#define AFE_IP_RESETB BIT(2) > > + > > +/* HDMI input data format registers */ > > +#define HDMI_REG_INPUT_MODE 0x70 > > +#define IN_RGB 0x00 > > + > > +/* HDMI general control registers */ > > +#define HDMI_REG_HDMI_MODE 0xc0 > > +#define TX_HDMI_MODE BIT(0) > > + > > +#define HDMI_REG_GCP 0xc1 > > +#define AVMUTE BIT(0) > > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > > + > > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > > +#define ENABLE_PKT BIT(0) > > +#define REPEAT_PKT BIT(1) > > + > > +/* > > +--------------------------------------------------------------------- > > +-- > > +------ > > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > > + > > +/* AVI packet registers */ > > +#define HDMI_REG_AVI_DB1 0x158 > > +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) > > +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) > > + > > +#define MAX_PIXEL_CLOCK_KHZ 150000 > > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > > + > > +struct it6263 { > > + struct device *dev; > > + struct i2c_client *hdmi_i2c; > > + struct i2c_client *lvds_i2c; > > + struct regmap *hdmi_regmap; > > + struct regmap *lvds_regmap; > > + struct drm_bridge bridge; > > + struct drm_bridge *next_bridge; > > + struct drm_connector connector; > > + struct gpio_desc *reset_gpio; > > + bool lvds_dual_link; > > + bool lvds_link12_swap; > > +}; > > + > > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > > +*bridge) { > > + return container_of(bridge, struct it6263, bridge); } > > + > > +static inline struct it6263 *connector_to_it6263(struct drm_connector > > +*conn) { > > + return container_of(conn, struct it6263, connector); } > > + > > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > > +int > > +reg) { > > + switch (reg) { > > + case HDMI_REG_SW_RST: > > + case HDMI_REG_BANK_CTRL: > > + case HDMI_REG_DDC_MASTER_CTRL: > > + case HDMI_REG_DDC_HEADER: > > + case HDMI_REG_DDC_REQOFF: > > + case HDMI_REG_DDC_REQCOUNT: > > + case HDMI_REG_DDC_EDIDSEG: > > + case HDMI_REG_DDC_CMD: > > + case HDMI_REG_LVDS_PORT: > > + case HDMI_REG_LVDS_PORT_EN: > > + case HDMI_REG_AFE_DRV_CTRL: > > + case HDMI_REG_AFE_XP_CTRL: > > + case HDMI_REG_AFE_ISW_CTRL: > > + case HDMI_REG_AFE_IP_CTRL: > > + case HDMI_REG_INPUT_MODE: > > + case HDMI_REG_HDMI_MODE: > > + case HDMI_REG_GCP: > > + case HDMI_REG_PKT_GENERAL_CTRL: > > + case HDMI_REG_AVI_DB1: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > > +reg) { > > + if (it6263_hdmi_writeable_reg(dev, reg)) > > + return true; > > + > > + switch (reg) { > > + case HDMI_REG_SYS_STATUS: > > + case HDMI_REG_DDC_STATUS: > > + case HDMI_REG_DDC_READFIFO: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > > +reg) { > > + switch (reg) { > > + case HDMI_REG_SW_RST: > > + case HDMI_REG_SYS_STATUS: > > + case HDMI_REG_DDC_STATUS: > > + case HDMI_REG_DDC_READFIFO: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > > + .range_min = 0x00, > > + .range_max = HDMI_REG_AVI_DB1, > > + .selector_reg = HDMI_REG_BANK_CTRL, > > + .selector_mask = REG_BANK_SEL, > > + .selector_shift = 0, > > + .window_start = 0x00, > > + .window_len = 0x100, > > +}; > > + > > +static const struct regmap_config it6263_hdmi_regmap_config = { > > + .name = "it6263-hdmi", > > + .reg_bits = 8, > > + .val_bits = 8, > > + .writeable_reg = it6263_hdmi_writeable_reg, > > + .readable_reg = it6263_hdmi_readable_reg, > > + .volatile_reg = it6263_hdmi_volatile_reg, > > + .max_register = HDMI_REG_AVI_DB1, > > + .ranges = &it6263_hdmi_range_cfg, > > + .num_ranges = 1, > > + .cache_type = REGCACHE_MAPLE, > > +}; > > + > > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > > +int > > +reg) { > > + switch (reg) { > > + case LVDS_REG_05: > > + case LVDS_REG_0B: > > + case LVDS_REG_2C: > > + case LVDS_REG_3C: > > + case LVDS_REG_3F: > > + case LVDS_REG_47: > > + case LVDS_REG_48: > > + case LVDS_REG_4F: > > + case LVDS_REG_52: > > + return true; > > + default: > > + return false; > > + } > > +} > > + > > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > > +reg) { > > + return it6263_lvds_writeable_reg(dev, reg); } > > + > > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > > +reg) { > > + return reg == LVDS_REG_05; > > +} > > + > > +static const struct regmap_config it6263_lvds_regmap_config = { > > + .name = "it6263-lvds", > > + .reg_bits = 8, > > + .val_bits = 8, > > + .writeable_reg = it6263_lvds_writeable_reg, > > + .readable_reg = it6263_lvds_readable_reg, > > + .volatile_reg = it6263_lvds_volatile_reg, > > + .max_register = LVDS_REG_52, > > + .cache_type = REGCACHE_MAPLE, > > +}; > > + > > +static const char * const it6263_supplies[] = { > > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > > + "avcc", "anvdd", "apvdd" > > +}; > > + > > +static int it6263_parse_dt(struct it6263 *it) { > > + struct device *dev = it->dev; > > + struct device_node *port0, *port1; > > + int ret = 0; > > + > > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > > + if (IS_ERR(it->next_bridge)) > > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > > + "failed to get next bridge\n"); > > + > > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > > + if (port0 && port1) { > > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > > + it->lvds_dual_link = true; > > + it->lvds_link12_swap = true; > > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > > + it->lvds_dual_link = true; > > + } > > + > > + if (!it->lvds_dual_link) { > > + dev_err(dev, > > + "failed to get LVDS dual link pixel order\n"); > > + ret = -EINVAL; > > + } > > + } else if (port1) { > > + ret = -EINVAL; > > + dev_err(dev, "single input LVDS port1 is not supported\n"); > > Are you supporting single input LVDS port0?? > > > + } else if (!port0) { > > + ret = -EINVAL; > > + dev_err(dev, "no input LVDS port\n"); > > + } > > + > > + of_node_put(port0); > > + of_node_put(port1); > > + > > + return ret; > > +} > > + > > +static inline void it6263_reset(struct it6263 *it) { > > + if (!it->reset_gpio) > > + return; > > + > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > + fsleep(1000); > > + gpiod_set_value_cansleep(it->reset_gpio, 1); > > + /* The chip maker says the low pulse should be at least 40ms. */ > > + fsleep(40000); > > + gpiod_set_value_cansleep(it->reset_gpio, 0); > > + /* addtional time to wait the high voltage to be stable */ > > + fsleep(5000); > > What about other resets ?? > > /* AFE PLL reset and pclk reset */ > > > +} > > + > > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > > + int ret; > > + > > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > > + if (ret) > > + return ret; > > + > > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > > +} > > + > > +static inline void it6263_lvds_reset(struct it6263 *it) { > > + /* AFE PLL reset */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > > + fsleep(1000); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > > + > > + /* software pixel clock domain reset */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > > + REG_SOFT_P_RST); > > + fsleep(1000); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > > + fsleep(10000); > > +} > > + > > +static inline void it6263_lvds_set_interface(struct it6263 *it) { > > + /* color depth */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > > + /* output mapping */ > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > > + > > + if (it->lvds_dual_link) { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > > + } else { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > > + } > > +} > > + > > +static inline void it6263_lvds_set_afe(struct it6263 *it) { > > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > > + > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > > + REG_SSC_PCLK_RF); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > > + REG_DESSC_ENB); > > +} > > + > > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > > + > > +static inline void it6263_lvds_config(struct it6263 *it) { > > + it6263_lvds_reset(it); > > + it6263_lvds_set_interface(it); > > + it6263_lvds_set_afe(it); > > + it6263_lvds_sys_cfg(it); > > +} > > + > > +static inline void it6263_hdmi_config(struct it6263 *it) { > > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > > + HDMI_COLOR_DEPTH_24); > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, > > + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } > > + > > +static enum drm_connector_status it6263_detect(struct it6263 *it) { > > + unsigned int val; > > + > > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > > + if (val & HPDETECT) > > + return connector_status_connected; > > + else > > + return connector_status_disconnected; } > > + > > +static enum drm_connector_status > > +it6263_connector_detect(struct drm_connector *connector, bool force) { > > + struct it6263 *it = connector_to_it6263(connector); > > + > > + return it6263_detect(it); > > +} > > + > > +static const struct drm_connector_funcs it6263_connector_funcs = { > > + .detect = it6263_connector_detect, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .destroy = drm_connector_cleanup, > > + .reset = drm_atomic_helper_connector_reset, > > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > > +size_t len) { > > + struct it6263 *it = data; > > + struct regmap *regmap = it->hdmi_regmap; > > + unsigned int start = (block % 2) * EDID_LENGTH; > > + unsigned int segment = block >> 1; > > + unsigned int count, val; > > + int ret; > > + > > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > > + > > + while (len) { > > + /* clear DDC FIFO */ > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > > + > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > > + val, val & DDC_DONE, > > + 2000, 10000); > > + if (ret) { > > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > > + return ret; > > + } > > + > > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > > + > > + /* fire the read command */ > > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > > + > > + start += count; > > + len -= count; > > + > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > > + val & (DDC_DONE | DDC_ERROR), > > + 20000, 250000); > > + if (ret && !(val & DDC_ERROR)) { > > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > > + return ret; > > + } > > + > > + if (val & DDC_ERROR) { > > + dev_err(it->dev, "DDC error\n"); > > + return -EIO; > > + } > > + > > + /* cache to buffer */ > > + for (; count > 0; count--) { > > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > > + *(buf++) = val; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static int it6263_connector_get_modes(struct drm_connector > > +*connector) { > > + struct it6263 *it = connector_to_it6263(connector); > > + const struct drm_edid *drm_edid; > > + int count; > > + > > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > > + > > + drm_edid_connector_update(connector, drm_edid); > > + count = drm_edid_connector_add_modes(connector); > > + > > + drm_edid_free(drm_edid); > > + > > + return count; > > +} > > + > > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > > + .get_modes = it6263_connector_get_modes, }; > > + > > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state) { > > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > > + > > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > > + > > +static void > > +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > > + struct drm_bridge_state *old_bridge_state) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > > + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > > + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > > + AFE_DRV_RST | AFE_DRV_PWD); > > +} > > + > > +static void > > +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > > + struct drm_bridge_state *old_bridge_state) { > > + struct drm_atomic_state *state = old_bridge_state->base.state; > > + struct it6263 *it = bridge_to_it6263(bridge); > > + const struct drm_crtc_state *crtc_state; > > + struct regmap *regmap = it->hdmi_regmap; > > + const struct drm_display_mode *mode; > > + struct drm_connector *connector; > > + bool is_stable = false; > > + struct drm_crtc *crtc; > > + unsigned int val; > > + bool pclk_high; > > + int i, ret; > > + > > + connector = drm_atomic_get_new_connector_for_encoder(state, > > + bridge->encoder); > > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > > + mode = &crtc_state->adjusted_mode; > > + > > + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > > + > > + /* HDMI AFE setup */ > > + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > > + if (pclk_high) > > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > + AFE_XP_GAINBIT | AFE_XP_RESETB); > > + else > > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > > + AFE_XP_ER0 | AFE_XP_RESETB); > > + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > > + if (pclk_high) > > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > + AFE_IP_GAINBIT | AFE_IP_RESETB); > > + else > > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > > + AFE_IP_ER0 | AFE_IP_RESETB); > > + > > + /* HDMI software video reset */ > > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > > + fsleep(1000); > > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > > + > > + /* reconfigure LVDS and retry several times in case video is instable */ > > + for (i = 0; i < 3; i++) { > > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > > + val & TXVIDSTABLE, > > + 20000, 500000); > > + if (!ret) { > > + is_stable = true; > > + break; > > + } > > + > > + it6263_lvds_config(it); > > + } > > + > > + if (!is_stable) > > + dev_warn(it->dev, "failed to wait for video stable\n"); > > + > > + /* HDMI AFE reset release and power up */ > > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > > + > > + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > > + > > + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > > +REPEAT_PKT); } > > + > > +static enum drm_mode_status > > +it6263_bridge_mode_valid(struct drm_bridge *bridge, > > + const struct drm_display_info *info, > > + const struct drm_display_mode *mode) { > > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : > > +MODE_OK; } > > + > > +static int it6263_bridge_attach(struct drm_bridge *bridge, > > + enum drm_bridge_attach_flags flags) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + int ret; > > + > > + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > > + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > > + if (ret < 0) > > + return ret; > > + > > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > > + return 0; > > + > > + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > > + DRM_CONNECTOR_POLL_DISCONNECT; > > + > > + ret = drm_connector_init(bridge->dev, &it->connector, > > + &it6263_connector_funcs, > > + DRM_MODE_CONNECTOR_HDMIA); > > + if (ret) > > + return ret; > > + > > + drm_connector_helper_add(&it->connector, > > + &it6263_connector_helper_funcs); > > + drm_connector_attach_encoder(&it->connector, bridge->encoder); > > + > > + return 0; > > +} > > + > > +static enum drm_connector_status it6263_bridge_detect(struct > > +drm_bridge > > +*bridge) { > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + return it6263_detect(it); > > +} > > + > > +static const struct drm_edid * > > +it6263_bridge_edid_read(struct drm_bridge *bridge, > > + struct drm_connector *connector) > > +{ > > + struct it6263 *it = bridge_to_it6263(bridge); > > + > > + return drm_edid_read_custom(connector, it6263_read_edid, it); } > > + > > +static u32 * > > +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > > + struct drm_bridge_state *bridge_state, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state, > > + u32 output_fmt, > > + unsigned int *num_input_fmts) > > +{ > > + u32 *input_fmts; > > + > > + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > > + if (!input_fmts) { > > + *num_input_fmts = 0; > > + return NULL; > > + } > > + > > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > > Why is it hardcoded? What about supporting VESA?? > > > + *num_input_fmts = 1; > > + > > + return input_fmts; > > +} > > + > > +static const struct drm_bridge_funcs it6263_bridge_funcs = { > > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > > + .atomic_reset = drm_atomic_helper_bridge_reset, > > + .attach = it6263_bridge_attach, > > + .mode_valid = it6263_bridge_mode_valid, > > + .atomic_disable = it6263_bridge_atomic_disable, > > + .atomic_enable = it6263_bridge_atomic_enable, > > + .atomic_check = it6263_bridge_atomic_check, > > + .detect = it6263_bridge_detect, > > + .edid_read = it6263_bridge_edid_read, > > + .atomic_get_input_bus_fmts = > > +it6263_bridge_atomic_get_input_bus_fmts, > > +}; Like [1] static const struct drm_bridge_funcs it6263_bridge_funcs = { .attach = it6263_bridge_attach, .mode_set = it6263_bridge_mode_set, .disable = it6263_bridge_disable, .enable = it6263_bridge_enable, .get_edid = it6263_bridge_get_edid, .detect = it6263_bridge_detect, }; https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c?h=v6.12-rc1#n998 Is it not sufficient for your use case?? Cheers, Biju > > + > > +static int it6263_probe(struct i2c_client *client) { > > + struct device *dev = &client->dev; > > + struct it6263 *it; > > + int ret; > > + > > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > > + if (!it) > > + return -ENOMEM; > > + > > + it->dev = dev; > > + it->hdmi_i2c = client; > > + > > + it->hdmi_regmap = devm_regmap_init_i2c(client, > > + &it6263_hdmi_regmap_config); > > + if (IS_ERR(it->hdmi_regmap)) > > + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > > + "failed to init I2C regmap for HDMI\n"); > > + > > + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > > + if (IS_ERR(it->reset_gpio)) > > + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > > + "failed to get reset gpio\n"); > > + > > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > > + it6263_supplies); > > + if (ret) > > + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > > + > > + ret = it6263_parse_dt(it); > > + if (ret) > > + return ret; > > + > > + it6263_reset(it); > > + > > + ret = it6263_lvds_set_i2c_addr(it); > > + if (ret) > > + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > > + > > + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > > + LVDS_INPUT_CTRL_I2C_ADDR); > > + if (IS_ERR(it->lvds_i2c)) > > + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > > + "failed to allocate I2C device for LVDS\n"); > > Maybe use action_or_reset and call i2c_unregister_device(); > > > + > > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > > + &it6263_lvds_regmap_config); > > + if (IS_ERR(it->lvds_regmap)) > > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > > + "failed to init I2C regmap for LVDS\n"); > > > + > > + it6263_lvds_config(it); > > + it6263_hdmi_config(it); > > > + > > + i2c_set_clientdata(client, it); > > + > > + it->bridge.funcs = &it6263_bridge_funcs; > > + it->bridge.of_node = dev->of_node; > > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > > it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ?? > > > + drm_bridge_add(&it->bridge); > > + > > + return 0; > > +} > > + > > +static void it6263_remove(struct i2c_client *client) { > > + struct it6263 *it = i2c_get_clientdata(client); > > + > > + drm_bridge_remove(&it->bridge); > > > +} > > + > > +static const struct of_device_id it6263_of_match[] = { > > + { .compatible = "ite,it6263", }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, it6263_of_match); > > + > > +static const struct i2c_device_id it6263_i2c_ids[] = { > > + { "it6263", 0 }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > > + > > +static struct i2c_driver it6263_driver = { > > + .probe = it6263_probe, > > + .remove = it6263_remove, > > + .driver = { > > + .name = "it6263", > > + .of_match_table = it6263_of_match, > > + }, > > + .id_table = it6263_i2c_ids, > > +}; > > +module_i2c_driver(it6263_driver); > > + > > +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > > +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.34.1 > >
Hi Liu Ying, > -----Original Message----- > From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> On Behalf Of Liu Ying > Sent: Monday, September 30, 2024 6:29 AM > Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > > Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the > LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS > mapping. > > Product link: > https://www.ite.com.tw/en/product/cate1/IT6263 > > Signed-off-by: Liu Ying <victor.liu@nxp.com> I have tested this patch on Renesas RZ/G3E SMARC EVK in dual LVDS mode with JEDAI mapping. Please add me in loop when you send next version. So, that I can test and provide feedback. Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Cheers, Biju > --- > drivers/gpu/drm/bridge/Kconfig | 8 + > drivers/gpu/drm/bridge/Makefile | 1 + > drivers/gpu/drm/bridge/ite-it6263.c | 829 ++++++++++++++++++++++++++++ > 3 files changed, 838 insertions(+) > create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index > 3eb955333c80..93f99682a090 100644 > --- a/drivers/gpu/drm/bridge/Kconfig > +++ b/drivers/gpu/drm/bridge/Kconfig > @@ -90,6 +90,14 @@ config DRM_FSL_LDB > help > Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > > +config DRM_ITE_IT6263 > + tristate "ITE IT6263 LVDS/HDMI bridge" > + depends on OF > + select DRM_KMS_HELPER > + select REGMAP_I2C > + help > + ITE IT6263 LVDS to HDMI bridge chip driver. > + > config DRM_ITE_IT6505 > tristate "ITE IT6505 DisplayPort bridge" > depends on OF > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index > 7df87b582dca..f3776dd473fd 100644 > --- a/drivers/gpu/drm/bridge/Makefile > +++ b/drivers/gpu/drm/bridge/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git a/drivers/gpu/drm/bridge/ite-it6263.c > b/drivers/gpu/drm/bridge/ite-it6263.c > new file mode 100644 > index 000000000000..886588497bc1 > --- /dev/null > +++ b/drivers/gpu/drm/bridge/ite-it6263.c > @@ -0,0 +1,829 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2024 NXP > + */ > + > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/i2c.h> > +#include <linux/media-bus-format.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > +<drm/drm_edid.h> #include <drm/drm_of.h> #include > +<drm/drm_probe_helper.h> > + > +/* > +----------------------------------------------------------------------- > +------ > + * LVDS registers > + */ > + > +/* LVDS software reset registers */ > +#define LVDS_REG_05 0x05 > +#define REG_SOFT_P_RST BIT(1) > + > +/* LVDS system configuration registers */ > +/* 0x0b */ > +#define LVDS_REG_0B 0x0b > +#define REG_SSC_PCLK_RF BIT(0) > +#define REG_LVDS_IN_SWAP BIT(1) > + > +/* LVDS test pattern gen control registers */ > +/* 0x2c */ > +#define LVDS_REG_2C 0x2c > +#define REG_COL_DEP GENMASK(1, 0) > +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > +#define OUT_MAP BIT(4) > +#define JEIDA 0 > +#define REG_DESSC_ENB BIT(6) > +#define DMODE BIT(7) > +#define DISO BIT(7) > +#define SISO 0 > + > +#define LVDS_REG_3C 0x3c > +#define LVDS_REG_3F 0x3f > +#define LVDS_REG_47 0x47 > +#define LVDS_REG_48 0x48 > +#define LVDS_REG_4F 0x4f > +#define LVDS_REG_52 0x52 > + > +/* > +----------------------------------------------------------------------- > +------ > + * HDMI registers are separated into three banks: > + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > + > +/* HDMI genernal registers */ > +#define HDMI_REG_SW_RST 0x04 > +#define SOFTREF_RST BIT(5) > +#define SOFTA_RST BIT(4) > +#define SOFTV_RST BIT(3) > +#define AUD_RST BIT(2) > +#define HDCP_RST BIT(0) > +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > + AUD_RST | HDCP_RST) > + > +#define HDMI_REG_SYS_STATUS 0x0e > +#define HPDETECT BIT(6) > +#define TXVIDSTABLE BIT(4) > + > +#define HDMI_REG_BANK_CTRL 0x0f > +#define REG_BANK_SEL BIT(0) > + > +/* HDMI System DDC control registers */ > +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > +#define MASTER_SEL_HOST BIT(0) > + > +#define HDMI_REG_DDC_HEADER 0x11 > + > +#define HDMI_REG_DDC_REQOFF 0x12 > +#define HDMI_REG_DDC_REQCOUNT 0x13 > +#define HDMI_REG_DDC_EDIDSEG 0x14 > + > +#define HDMI_REG_DDC_CMD 0x15 > +#define DDC_CMD_EDID_READ 0x3 > +#define DDC_CMD_FIFO_CLR 0x9 > + > +#define HDMI_REG_DDC_STATUS 0x16 > +#define DDC_DONE BIT(7) > +#define DDC_NOACK BIT(5) > +#define DDC_WAITBUS BIT(4) > +#define DDC_ARBILOSE BIT(3) > +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > + > +#define HDMI_DDC_FIFO_BYTES 32 > +#define HDMI_REG_DDC_READFIFO 0x17 > +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > +#define HDMI_REG_LVDS_PORT_EN 0x1e > +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > + > +/* > +----------------------------------------------------------------------- > +------ > + * 2) HDMI register bank0: 0x30 ~ 0xff > + */ > + > +/* HDMI AFE registers */ > +#define HDMI_REG_AFE_DRV_CTRL 0x61 > +#define AFE_DRV_PWD BIT(5) > +#define AFE_DRV_RST BIT(4) > + > +#define HDMI_REG_AFE_XP_CTRL 0x62 > +#define AFE_XP_GAINBIT BIT(7) > +#define AFE_XP_ER0 BIT(4) > +#define AFE_XP_RESETB BIT(3) > + > +#define HDMI_REG_AFE_ISW_CTRL 0x63 > + > +#define HDMI_REG_AFE_IP_CTRL 0x64 > +#define AFE_IP_GAINBIT BIT(7) > +#define AFE_IP_ER0 BIT(3) > +#define AFE_IP_RESETB BIT(2) > + > +/* HDMI input data format registers */ > +#define HDMI_REG_INPUT_MODE 0x70 > +#define IN_RGB 0x00 > + > +/* HDMI general control registers */ > +#define HDMI_REG_HDMI_MODE 0xc0 > +#define TX_HDMI_MODE BIT(0) > + > +#define HDMI_REG_GCP 0xc1 > +#define AVMUTE BIT(0) > +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > + > +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > +#define ENABLE_PKT BIT(0) > +#define REPEAT_PKT BIT(1) > + > +/* > +----------------------------------------------------------------------- > +------ > + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > + > +/* AVI packet registers */ > +#define HDMI_REG_AVI_DB1 0x158 > +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) > +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) > + > +#define MAX_PIXEL_CLOCK_KHZ 150000 > +#define HIGH_PIXEL_CLOCK_KHZ 80000 > + > +struct it6263 { > + struct device *dev; > + struct i2c_client *hdmi_i2c; > + struct i2c_client *lvds_i2c; > + struct regmap *hdmi_regmap; > + struct regmap *lvds_regmap; > + struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > + struct drm_connector connector; > + struct gpio_desc *reset_gpio; > + bool lvds_dual_link; > + bool lvds_link12_swap; > +}; > + > +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > +*bridge) { > + return container_of(bridge, struct it6263, bridge); } > + > +static inline struct it6263 *connector_to_it6263(struct drm_connector > +*conn) { > + return container_of(conn, struct it6263, connector); } > + > +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_BANK_CTRL: > + case HDMI_REG_DDC_MASTER_CTRL: > + case HDMI_REG_DDC_HEADER: > + case HDMI_REG_DDC_REQOFF: > + case HDMI_REG_DDC_REQCOUNT: > + case HDMI_REG_DDC_EDIDSEG: > + case HDMI_REG_DDC_CMD: > + case HDMI_REG_LVDS_PORT: > + case HDMI_REG_LVDS_PORT_EN: > + case HDMI_REG_AFE_DRV_CTRL: > + case HDMI_REG_AFE_XP_CTRL: > + case HDMI_REG_AFE_ISW_CTRL: > + case HDMI_REG_AFE_IP_CTRL: > + case HDMI_REG_INPUT_MODE: > + case HDMI_REG_HDMI_MODE: > + case HDMI_REG_GCP: > + case HDMI_REG_PKT_GENERAL_CTRL: > + case HDMI_REG_AVI_DB1: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > +reg) { > + if (it6263_hdmi_writeable_reg(dev, reg)) > + return true; > + > + switch (reg) { > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case HDMI_REG_SW_RST: > + case HDMI_REG_SYS_STATUS: > + case HDMI_REG_DDC_STATUS: > + case HDMI_REG_DDC_READFIFO: > + return true; > + default: > + return false; > + } > +} > + > +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > + .range_min = 0x00, > + .range_max = HDMI_REG_AVI_DB1, > + .selector_reg = HDMI_REG_BANK_CTRL, > + .selector_mask = REG_BANK_SEL, > + .selector_shift = 0, > + .window_start = 0x00, > + .window_len = 0x100, > +}; > + > +static const struct regmap_config it6263_hdmi_regmap_config = { > + .name = "it6263-hdmi", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_hdmi_writeable_reg, > + .readable_reg = it6263_hdmi_readable_reg, > + .volatile_reg = it6263_hdmi_volatile_reg, > + .max_register = HDMI_REG_AVI_DB1, > + .ranges = &it6263_hdmi_range_cfg, > + .num_ranges = 1, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int > +reg) { > + switch (reg) { > + case LVDS_REG_05: > + case LVDS_REG_0B: > + case LVDS_REG_2C: > + case LVDS_REG_3C: > + case LVDS_REG_3F: > + case LVDS_REG_47: > + case LVDS_REG_48: > + case LVDS_REG_4F: > + case LVDS_REG_52: > + return true; > + default: > + return false; > + } > +} > + > +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > +reg) { > + return it6263_lvds_writeable_reg(dev, reg); } > + > +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > +reg) { > + return reg == LVDS_REG_05; > +} > + > +static const struct regmap_config it6263_lvds_regmap_config = { > + .name = "it6263-lvds", > + .reg_bits = 8, > + .val_bits = 8, > + .writeable_reg = it6263_lvds_writeable_reg, > + .readable_reg = it6263_lvds_readable_reg, > + .volatile_reg = it6263_lvds_volatile_reg, > + .max_register = LVDS_REG_52, > + .cache_type = REGCACHE_MAPLE, > +}; > + > +static const char * const it6263_supplies[] = { > + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > + "avcc", "anvdd", "apvdd" > +}; > + > +static int it6263_parse_dt(struct it6263 *it) { > + struct device *dev = it->dev; > + struct device_node *port0, *port1; > + int ret = 0; > + > + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > + if (IS_ERR(it->next_bridge)) > + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > + "failed to get next bridge\n"); > + > + port0 = of_graph_get_port_by_id(dev->of_node, 0); > + port1 = of_graph_get_port_by_id(dev->of_node, 1); > + if (port0 && port1) { > + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > + it->lvds_dual_link = true; > + it->lvds_link12_swap = true; > + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > + it->lvds_dual_link = true; > + } > + > + if (!it->lvds_dual_link) { > + dev_err(dev, > + "failed to get LVDS dual link pixel order\n"); > + ret = -EINVAL; > + } > + } else if (port1) { > + ret = -EINVAL; > + dev_err(dev, "single input LVDS port1 is not supported\n"); > + } else if (!port0) { > + ret = -EINVAL; > + dev_err(dev, "no input LVDS port\n"); > + } > + > + of_node_put(port0); > + of_node_put(port1); > + > + return ret; > +} > + > +static inline void it6263_reset(struct it6263 *it) { > + if (!it->reset_gpio) > + return; > + > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + fsleep(1000); > + gpiod_set_value_cansleep(it->reset_gpio, 1); > + /* The chip maker says the low pulse should be at least 40ms. */ > + fsleep(40000); > + gpiod_set_value_cansleep(it->reset_gpio, 0); > + /* addtional time to wait the high voltage to be stable */ > + fsleep(5000); > +} > + > +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > + int ret; > + > + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > + LVDS_INPUT_CTRL_I2C_ADDR << 1); > + if (ret) > + return ret; > + > + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); } > + > +static inline void it6263_lvds_reset(struct it6263 *it) { > + /* AFE PLL reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > + > + /* software pixel clock domain reset */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > + REG_SOFT_P_RST); > + fsleep(1000); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > + fsleep(10000); > +} > + > +static inline void it6263_lvds_set_interface(struct it6263 *it) { > + /* color depth */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > + /* output mapping */ > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > + > + if (it->lvds_dual_link) { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > + } else { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > + } > +} > + > +static inline void it6263_lvds_set_afe(struct it6263 *it) { > + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > + > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > + REG_SSC_PCLK_RF); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > + REG_DESSC_ENB); > +} > + > +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > + > +static inline void it6263_lvds_config(struct it6263 *it) { > + it6263_lvds_reset(it); > + it6263_lvds_set_interface(it); > + it6263_lvds_set_afe(it); > + it6263_lvds_sys_cfg(it); > +} > + > +static inline void it6263_hdmi_config(struct it6263 *it) { > + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > + HDMI_COLOR_DEPTH_24); > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, > + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } > + > +static enum drm_connector_status it6263_detect(struct it6263 *it) { > + unsigned int val; > + > + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > + if (val & HPDETECT) > + return connector_status_connected; > + else > + return connector_status_disconnected; } > + > +static enum drm_connector_status > +it6263_connector_detect(struct drm_connector *connector, bool force) { > + struct it6263 *it = connector_to_it6263(connector); > + > + return it6263_detect(it); > +} > + > +static const struct drm_connector_funcs it6263_connector_funcs = { > + .detect = it6263_connector_detect, > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = drm_connector_cleanup, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > +size_t len) { > + struct it6263 *it = data; > + struct regmap *regmap = it->hdmi_regmap; > + unsigned int start = (block % 2) * EDID_LENGTH; > + unsigned int segment = block >> 1; > + unsigned int count, val; > + int ret; > + > + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > + > + while (len) { > + /* clear DDC FIFO */ > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > + val, val & DDC_DONE, > + 2000, 10000); > + if (ret) { > + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > + return ret; > + } > + > + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > + > + /* fire the read command */ > + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > + > + start += count; > + len -= count; > + > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > + val & (DDC_DONE | DDC_ERROR), > + 20000, 250000); > + if (ret && !(val & DDC_ERROR)) { > + dev_err(it->dev, "failed to read EDID:%d\n", ret); > + return ret; > + } > + > + if (val & DDC_ERROR) { > + dev_err(it->dev, "DDC error\n"); > + return -EIO; > + } > + > + /* cache to buffer */ > + for (; count > 0; count--) { > + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > + *(buf++) = val; > + } > + } > + > + return 0; > +} > + > +static int it6263_connector_get_modes(struct drm_connector *connector) > +{ > + struct it6263 *it = connector_to_it6263(connector); > + const struct drm_edid *drm_edid; > + int count; > + > + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > + > + drm_edid_connector_update(connector, drm_edid); > + count = drm_edid_connector_add_modes(connector); > + > + drm_edid_free(drm_edid); > + > + return count; > +} > + > +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > + .get_modes = it6263_connector_get_modes, }; > + > +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state) { > + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > + > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > + > +static void > +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) { > + struct it6263 *it = bridge_to_it6263(bridge); > + > + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > + AFE_DRV_RST | AFE_DRV_PWD); > +} > + > +static void > +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) { > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct it6263 *it = bridge_to_it6263(bridge); > + const struct drm_crtc_state *crtc_state; > + struct regmap *regmap = it->hdmi_regmap; > + const struct drm_display_mode *mode; > + struct drm_connector *connector; > + bool is_stable = false; > + struct drm_crtc *crtc; > + unsigned int val; > + bool pclk_high; > + int i, ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, > + bridge->encoder); > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > + mode = &crtc_state->adjusted_mode; > + > + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > + > + /* HDMI AFE setup */ > + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_GAINBIT | AFE_XP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > + AFE_XP_ER0 | AFE_XP_RESETB); > + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > + if (pclk_high) > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_GAINBIT | AFE_IP_RESETB); > + else > + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > + AFE_IP_ER0 | AFE_IP_RESETB); > + > + /* HDMI software video reset */ > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > + fsleep(1000); > + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > + > + /* reconfigure LVDS and retry several times in case video is instable */ > + for (i = 0; i < 3; i++) { > + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > + val & TXVIDSTABLE, > + 20000, 500000); > + if (!ret) { > + is_stable = true; > + break; > + } > + > + it6263_lvds_config(it); > + } > + > + if (!is_stable) > + dev_warn(it->dev, "failed to wait for video stable\n"); > + > + /* HDMI AFE reset release and power up */ > + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > + > + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > + > + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > +REPEAT_PKT); } > + > +static enum drm_mode_status > +it6263_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) { > + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; > +} > + > +static int it6263_bridge_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) { > + struct it6263 *it = bridge_to_it6263(bridge); > + int ret; > + > + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > + if (ret < 0) > + return ret; > + > + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > + return 0; > + > + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > + DRM_CONNECTOR_POLL_DISCONNECT; > + > + ret = drm_connector_init(bridge->dev, &it->connector, > + &it6263_connector_funcs, > + DRM_MODE_CONNECTOR_HDMIA); > + if (ret) > + return ret; > + > + drm_connector_helper_add(&it->connector, > + &it6263_connector_helper_funcs); > + drm_connector_attach_encoder(&it->connector, bridge->encoder); > + > + return 0; > +} > + > +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge > +*bridge) { > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return it6263_detect(it); > +} > + > +static const struct drm_edid * > +it6263_bridge_edid_read(struct drm_bridge *bridge, > + struct drm_connector *connector) > +{ > + struct it6263 *it = bridge_to_it6263(bridge); > + > + return drm_edid_read_custom(connector, it6263_read_edid, it); } > + > +static u32 * > +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > + struct drm_bridge_state *bridge_state, > + struct drm_crtc_state *crtc_state, > + struct drm_connector_state *conn_state, > + u32 output_fmt, > + unsigned int *num_input_fmts) > +{ > + u32 *input_fmts; > + > + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > + if (!input_fmts) { > + *num_input_fmts = 0; > + return NULL; > + } > + > + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > + *num_input_fmts = 1; > + > + return input_fmts; > +} > + > +static const struct drm_bridge_funcs it6263_bridge_funcs = { > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .attach = it6263_bridge_attach, > + .mode_valid = it6263_bridge_mode_valid, > + .atomic_disable = it6263_bridge_atomic_disable, > + .atomic_enable = it6263_bridge_atomic_enable, > + .atomic_check = it6263_bridge_atomic_check, > + .detect = it6263_bridge_detect, > + .edid_read = it6263_bridge_edid_read, > + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, > +}; > + > +static int it6263_probe(struct i2c_client *client) { > + struct device *dev = &client->dev; > + struct it6263 *it; > + int ret; > + > + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > + if (!it) > + return -ENOMEM; > + > + it->dev = dev; > + it->hdmi_i2c = client; > + > + it->hdmi_regmap = devm_regmap_init_i2c(client, > + &it6263_hdmi_regmap_config); > + if (IS_ERR(it->hdmi_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > + "failed to init I2C regmap for HDMI\n"); > + > + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(it->reset_gpio)) > + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > + "failed to get reset gpio\n"); > + > + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > + it6263_supplies); > + if (ret) > + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > + > + ret = it6263_parse_dt(it); > + if (ret) > + return ret; > + > + it6263_reset(it); > + > + ret = it6263_lvds_set_i2c_addr(it); > + if (ret) > + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > + > + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > + LVDS_INPUT_CTRL_I2C_ADDR); > + if (IS_ERR(it->lvds_i2c)) > + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > + "failed to allocate I2C device for LVDS\n"); > + > + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > + &it6263_lvds_regmap_config); > + if (IS_ERR(it->lvds_regmap)) > + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > + "failed to init I2C regmap for LVDS\n"); > + > + it6263_lvds_config(it); > + it6263_hdmi_config(it); > + > + i2c_set_clientdata(client, it); > + > + it->bridge.funcs = &it6263_bridge_funcs; > + it->bridge.of_node = dev->of_node; > + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > + drm_bridge_add(&it->bridge); > + > + return 0; > +} > + > +static void it6263_remove(struct i2c_client *client) { > + struct it6263 *it = i2c_get_clientdata(client); > + > + drm_bridge_remove(&it->bridge); > +} > + > +static const struct of_device_id it6263_of_match[] = { > + { .compatible = "ite,it6263", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, it6263_of_match); > + > +static const struct i2c_device_id it6263_i2c_ids[] = { > + { "it6263", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > + > +static struct i2c_driver it6263_driver = { > + .probe = it6263_probe, > + .remove = it6263_remove, > + .driver = { > + .name = "it6263", > + .of_match_table = it6263_of_match, > + }, > + .id_table = it6263_i2c_ids, > +}; > +module_i2c_driver(it6263_driver); > + > +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); MODULE_LICENSE("GPL"); > -- > 2.34.1 >
On 09/30/2024, Biju Das wrote: > Hi Liu, Hi Biju, > >> -----Original Message----- >> From: Biju Das >> Sent: Monday, September 30, 2024 10:16 AM >> Subject: RE: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter >> >> Hi Liu, >> >> Thanks for the patch. >> >>> -----Original Message----- >>> From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> >>> On Behalf Of Liu Ying >>> Sent: Monday, September 30, 2024 6:29 AM >>> Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter >>> >>> Add basic HDMI video output support. Currently, only RGB888 output >>> pixel format is supported. At the LVDS input side, the driver >>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. >>> >>> Product link: >>> https://www.ite.com.tw/en/product/cate1/IT6263 >>> >>> Signed-off-by: Liu Ying <victor.liu@nxp.com> >>> --- >>> drivers/gpu/drm/bridge/Kconfig | 8 + >>> drivers/gpu/drm/bridge/Makefile | 1 + >>> drivers/gpu/drm/bridge/ite-it6263.c | 829 >>> ++++++++++++++++++++++++++++ >>> 3 files changed, 838 insertions(+) >>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c >>> >>> diff --git a/drivers/gpu/drm/bridge/Kconfig >>> b/drivers/gpu/drm/bridge/Kconfig index >>> 3eb955333c80..93f99682a090 100644 >>> --- a/drivers/gpu/drm/bridge/Kconfig >>> +++ b/drivers/gpu/drm/bridge/Kconfig >>> @@ -90,6 +90,14 @@ config DRM_FSL_LDB >>> help >>> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. >>> >>> +config DRM_ITE_IT6263 >>> + tristate "ITE IT6263 LVDS/HDMI bridge" >>> + depends on OF >>> + select DRM_KMS_HELPER >>> + select REGMAP_I2C >>> + help >>> + ITE IT6263 LVDS to HDMI bridge chip driver. >>> + >>> config DRM_ITE_IT6505 >>> tristate "ITE IT6505 DisplayPort bridge" >>> depends on OF >>> diff --git a/drivers/gpu/drm/bridge/Makefile >>> b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd >>> 100644 >>> --- a/drivers/gpu/drm/bridge/Makefile >>> +++ b/drivers/gpu/drm/bridge/Makefile >>> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o >>> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o >>> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o >>> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o >>> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o >>> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o >>> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o >>> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git >>> a/drivers/gpu/drm/bridge/ite-it6263.c >>> b/drivers/gpu/drm/bridge/ite-it6263.c >>> new file mode 100644 >>> index 000000000000..886588497bc1 >>> --- /dev/null >>> +++ b/drivers/gpu/drm/bridge/ite-it6263.c >>> @@ -0,0 +1,829 @@ >>> +// SPDX-License-Identifier: GPL-2.0 >>> +/* >>> + * Copyright 2024 NXP >>> + */ >>> + >>> +#include <linux/bitfield.h> >>> +#include <linux/bits.h> >>> +#include <linux/delay.h> >>> +#include <linux/gpio/consumer.h> >>> +#include <linux/i2c.h> >>> +#include <linux/media-bus-format.h> >>> +#include <linux/module.h> >>> +#include <linux/of.h> >>> +#include <linux/regmap.h> >>> +#include <linux/regulator/consumer.h> >>> + >>> +#include <drm/drm_atomic.h> >>> +#include <drm/drm_atomic_helper.h> >>> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> >>> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include >>> +<drm/drm_edid.h> #include <drm/drm_of.h> #include >>> +<drm/drm_probe_helper.h> >>> + >>> +/* >>> +--------------------------------------------------------------------- >>> +-- >>> +------ >>> + * LVDS registers >>> + */ >>> + >>> +/* LVDS software reset registers */ >>> +#define LVDS_REG_05 0x05 >>> +#define REG_SOFT_P_RST BIT(1) >>> + >>> +/* LVDS system configuration registers */ >>> +/* 0x0b */ >>> +#define LVDS_REG_0B 0x0b >>> +#define REG_SSC_PCLK_RF BIT(0) >>> +#define REG_LVDS_IN_SWAP BIT(1) >>> + >>> +/* LVDS test pattern gen control registers */ >>> +/* 0x2c */ >>> +#define LVDS_REG_2C 0x2c >>> +#define REG_COL_DEP GENMASK(1, 0) >>> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) >>> +#define OUT_MAP BIT(4) >>> +#define JEIDA 0 >>> +#define REG_DESSC_ENB BIT(6) >>> +#define DMODE BIT(7) >>> +#define DISO BIT(7) >>> +#define SISO 0 >>> + >>> +#define LVDS_REG_3C 0x3c >>> +#define LVDS_REG_3F 0x3f >>> +#define LVDS_REG_47 0x47 >>> +#define LVDS_REG_48 0x48 >>> +#define LVDS_REG_4F 0x4f >>> +#define LVDS_REG_52 0x52 >>> + >>> +/* >>> +--------------------------------------------------------------------- >>> +-- >>> +------ >>> + * HDMI registers are separated into three banks: >>> + * 1) HDMI register common bank: 0x00 ~ 0x2f */ >>> + >>> +/* HDMI genernal registers */ >>> +#define HDMI_REG_SW_RST 0x04 >>> +#define SOFTREF_RST BIT(5) >>> +#define SOFTA_RST BIT(4) >>> +#define SOFTV_RST BIT(3) >>> +#define AUD_RST BIT(2) >>> +#define HDCP_RST BIT(0) >>> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ >>> + AUD_RST | HDCP_RST) >>> + >>> +#define HDMI_REG_SYS_STATUS 0x0e >>> +#define HPDETECT BIT(6) >>> +#define TXVIDSTABLE BIT(4) >>> + >>> +#define HDMI_REG_BANK_CTRL 0x0f >>> +#define REG_BANK_SEL BIT(0) >>> + >>> +/* HDMI System DDC control registers */ >>> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 >>> +#define MASTER_SEL_HOST BIT(0) >>> + >>> +#define HDMI_REG_DDC_HEADER 0x11 >>> + >>> +#define HDMI_REG_DDC_REQOFF 0x12 >>> +#define HDMI_REG_DDC_REQCOUNT 0x13 >>> +#define HDMI_REG_DDC_EDIDSEG 0x14 >>> + >>> +#define HDMI_REG_DDC_CMD 0x15 >>> +#define DDC_CMD_EDID_READ 0x3 >>> +#define DDC_CMD_FIFO_CLR 0x9 >>> + >>> +#define HDMI_REG_DDC_STATUS 0x16 >>> +#define DDC_DONE BIT(7) >>> +#define DDC_NOACK BIT(5) >>> +#define DDC_WAITBUS BIT(4) >>> +#define DDC_ARBILOSE BIT(3) >>> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) >>> + >>> +#define HDMI_DDC_FIFO_BYTES 32 >>> +#define HDMI_REG_DDC_READFIFO 0x17 >>> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ >>> +#define HDMI_REG_LVDS_PORT_EN 0x1e >>> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 >>> + >>> +/* >>> +--------------------------------------------------------------------- >>> +-- >>> +------ >>> + * 2) HDMI register bank0: 0x30 ~ 0xff */ >>> + >>> +/* HDMI AFE registers */ >>> +#define HDMI_REG_AFE_DRV_CTRL 0x61 >>> +#define AFE_DRV_PWD BIT(5) >>> +#define AFE_DRV_RST BIT(4) >>> + >>> +#define HDMI_REG_AFE_XP_CTRL 0x62 >>> +#define AFE_XP_GAINBIT BIT(7) >>> +#define AFE_XP_ER0 BIT(4) >>> +#define AFE_XP_RESETB BIT(3) >>> + >>> +#define HDMI_REG_AFE_ISW_CTRL 0x63 >>> + >>> +#define HDMI_REG_AFE_IP_CTRL 0x64 >>> +#define AFE_IP_GAINBIT BIT(7) >>> +#define AFE_IP_ER0 BIT(3) >>> +#define AFE_IP_RESETB BIT(2) >>> + >>> +/* HDMI input data format registers */ >>> +#define HDMI_REG_INPUT_MODE 0x70 >>> +#define IN_RGB 0x00 >>> + >>> +/* HDMI general control registers */ >>> +#define HDMI_REG_HDMI_MODE 0xc0 >>> +#define TX_HDMI_MODE BIT(0) >>> + >>> +#define HDMI_REG_GCP 0xc1 >>> +#define AVMUTE BIT(0) >>> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) >>> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) >>> + >>> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 >>> +#define ENABLE_PKT BIT(0) >>> +#define REPEAT_PKT BIT(1) >>> + >>> +/* >>> +--------------------------------------------------------------------- >>> +-- >>> +------ >>> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ >>> + >>> +/* AVI packet registers */ >>> +#define HDMI_REG_AVI_DB1 0x158 >>> +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) >>> +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) >>> + >>> +#define MAX_PIXEL_CLOCK_KHZ 150000 >>> +#define HIGH_PIXEL_CLOCK_KHZ 80000 >>> + >>> +struct it6263 { >>> + struct device *dev; >>> + struct i2c_client *hdmi_i2c; >>> + struct i2c_client *lvds_i2c; >>> + struct regmap *hdmi_regmap; >>> + struct regmap *lvds_regmap; >>> + struct drm_bridge bridge; >>> + struct drm_bridge *next_bridge; >>> + struct drm_connector connector; >>> + struct gpio_desc *reset_gpio; >>> + bool lvds_dual_link; >>> + bool lvds_link12_swap; >>> +}; >>> + >>> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge >>> +*bridge) { >>> + return container_of(bridge, struct it6263, bridge); } >>> + >>> +static inline struct it6263 *connector_to_it6263(struct drm_connector >>> +*conn) { >>> + return container_of(conn, struct it6263, connector); } >>> + >>> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned >>> +int >>> +reg) { >>> + switch (reg) { >>> + case HDMI_REG_SW_RST: >>> + case HDMI_REG_BANK_CTRL: >>> + case HDMI_REG_DDC_MASTER_CTRL: >>> + case HDMI_REG_DDC_HEADER: >>> + case HDMI_REG_DDC_REQOFF: >>> + case HDMI_REG_DDC_REQCOUNT: >>> + case HDMI_REG_DDC_EDIDSEG: >>> + case HDMI_REG_DDC_CMD: >>> + case HDMI_REG_LVDS_PORT: >>> + case HDMI_REG_LVDS_PORT_EN: >>> + case HDMI_REG_AFE_DRV_CTRL: >>> + case HDMI_REG_AFE_XP_CTRL: >>> + case HDMI_REG_AFE_ISW_CTRL: >>> + case HDMI_REG_AFE_IP_CTRL: >>> + case HDMI_REG_INPUT_MODE: >>> + case HDMI_REG_HDMI_MODE: >>> + case HDMI_REG_GCP: >>> + case HDMI_REG_PKT_GENERAL_CTRL: >>> + case HDMI_REG_AVI_DB1: >>> + return true; >>> + default: >>> + return false; >>> + } >>> +} >>> + >>> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int >>> +reg) { >>> + if (it6263_hdmi_writeable_reg(dev, reg)) >>> + return true; >>> + >>> + switch (reg) { >>> + case HDMI_REG_SYS_STATUS: >>> + case HDMI_REG_DDC_STATUS: >>> + case HDMI_REG_DDC_READFIFO: >>> + return true; >>> + default: >>> + return false; >>> + } >>> +} >>> + >>> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int >>> +reg) { >>> + switch (reg) { >>> + case HDMI_REG_SW_RST: >>> + case HDMI_REG_SYS_STATUS: >>> + case HDMI_REG_DDC_STATUS: >>> + case HDMI_REG_DDC_READFIFO: >>> + return true; >>> + default: >>> + return false; >>> + } >>> +} >>> + >>> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { >>> + .range_min = 0x00, >>> + .range_max = HDMI_REG_AVI_DB1, >>> + .selector_reg = HDMI_REG_BANK_CTRL, >>> + .selector_mask = REG_BANK_SEL, >>> + .selector_shift = 0, >>> + .window_start = 0x00, >>> + .window_len = 0x100, >>> +}; >>> + >>> +static const struct regmap_config it6263_hdmi_regmap_config = { >>> + .name = "it6263-hdmi", >>> + .reg_bits = 8, >>> + .val_bits = 8, >>> + .writeable_reg = it6263_hdmi_writeable_reg, >>> + .readable_reg = it6263_hdmi_readable_reg, >>> + .volatile_reg = it6263_hdmi_volatile_reg, >>> + .max_register = HDMI_REG_AVI_DB1, >>> + .ranges = &it6263_hdmi_range_cfg, >>> + .num_ranges = 1, >>> + .cache_type = REGCACHE_MAPLE, >>> +}; >>> + >>> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned >>> +int >>> +reg) { >>> + switch (reg) { >>> + case LVDS_REG_05: >>> + case LVDS_REG_0B: >>> + case LVDS_REG_2C: >>> + case LVDS_REG_3C: >>> + case LVDS_REG_3F: >>> + case LVDS_REG_47: >>> + case LVDS_REG_48: >>> + case LVDS_REG_4F: >>> + case LVDS_REG_52: >>> + return true; >>> + default: >>> + return false; >>> + } >>> +} >>> + >>> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int >>> +reg) { >>> + return it6263_lvds_writeable_reg(dev, reg); } >>> + >>> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int >>> +reg) { >>> + return reg == LVDS_REG_05; >>> +} >>> + >>> +static const struct regmap_config it6263_lvds_regmap_config = { >>> + .name = "it6263-lvds", >>> + .reg_bits = 8, >>> + .val_bits = 8, >>> + .writeable_reg = it6263_lvds_writeable_reg, >>> + .readable_reg = it6263_lvds_readable_reg, >>> + .volatile_reg = it6263_lvds_volatile_reg, >>> + .max_register = LVDS_REG_52, >>> + .cache_type = REGCACHE_MAPLE, >>> +}; >>> + >>> +static const char * const it6263_supplies[] = { >>> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", >>> + "avcc", "anvdd", "apvdd" >>> +}; >>> + >>> +static int it6263_parse_dt(struct it6263 *it) { >>> + struct device *dev = it->dev; >>> + struct device_node *port0, *port1; >>> + int ret = 0; >>> + >>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); >>> + if (IS_ERR(it->next_bridge)) >>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), >>> + "failed to get next bridge\n"); >>> + >>> + port0 = of_graph_get_port_by_id(dev->of_node, 0); >>> + port1 = of_graph_get_port_by_id(dev->of_node, 1); >>> + if (port0 && port1) { >>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && >>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { >>> + it->lvds_dual_link = true; >>> + it->lvds_link12_swap = true; >>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && >>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { >>> + it->lvds_dual_link = true; >>> + } >>> + >>> + if (!it->lvds_dual_link) { >>> + dev_err(dev, >>> + "failed to get LVDS dual link pixel order\n"); >>> + ret = -EINVAL; >>> + } >>> + } else if (port1) { >>> + ret = -EINVAL; >>> + dev_err(dev, "single input LVDS port1 is not supported\n"); >> >> Are you supporting single input LVDS port0?? >> >>> + } else if (!port0) { >>> + ret = -EINVAL; >>> + dev_err(dev, "no input LVDS port\n"); >>> + } >>> + >>> + of_node_put(port0); >>> + of_node_put(port1); >>> + >>> + return ret; >>> +} >>> + >>> +static inline void it6263_reset(struct it6263 *it) { >>> + if (!it->reset_gpio) >>> + return; >>> + >>> + gpiod_set_value_cansleep(it->reset_gpio, 0); >>> + fsleep(1000); >>> + gpiod_set_value_cansleep(it->reset_gpio, 1); >>> + /* The chip maker says the low pulse should be at least 40ms. */ >>> + fsleep(40000); >>> + gpiod_set_value_cansleep(it->reset_gpio, 0); >>> + /* addtional time to wait the high voltage to be stable */ >>> + fsleep(5000); >> >> What about other resets ?? >> >> /* AFE PLL reset and pclk reset */ >> >>> +} >>> + >>> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { >>> + int ret; >>> + >>> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, >>> + LVDS_INPUT_CTRL_I2C_ADDR << 1); >>> + if (ret) >>> + return ret; >>> + >>> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); >>> +} >>> + >>> +static inline void it6263_lvds_reset(struct it6263 *it) { >>> + /* AFE PLL reset */ >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); >>> + fsleep(1000); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); >>> + >>> + /* software pixel clock domain reset */ >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, >>> + REG_SOFT_P_RST); >>> + fsleep(1000); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); >>> + fsleep(10000); >>> +} >>> + >>> +static inline void it6263_lvds_set_interface(struct it6263 *it) { >>> + /* color depth */ >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); >>> + /* output mapping */ >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); >>> + >>> + if (it->lvds_dual_link) { >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); >>> + } else { >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); >>> + } >>> +} >>> + >>> +static inline void it6263_lvds_set_afe(struct it6263 *it) { >>> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); >>> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); >>> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); >>> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); >>> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); >>> + >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, >>> + REG_SSC_PCLK_RF); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, >>> + REG_DESSC_ENB); >>> +} >>> + >>> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, >>> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } >>> + >>> +static inline void it6263_lvds_config(struct it6263 *it) { >>> + it6263_lvds_reset(it); >>> + it6263_lvds_set_interface(it); >>> + it6263_lvds_set_afe(it); >>> + it6263_lvds_sys_cfg(it); >>> +} >>> + >>> +static inline void it6263_hdmi_config(struct it6263 *it) { >>> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); >>> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, >>> + HDMI_COLOR_DEPTH_24); >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, >>> + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } >>> + >>> +static enum drm_connector_status it6263_detect(struct it6263 *it) { >>> + unsigned int val; >>> + >>> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); >>> + if (val & HPDETECT) >>> + return connector_status_connected; >>> + else >>> + return connector_status_disconnected; } >>> + >>> +static enum drm_connector_status >>> +it6263_connector_detect(struct drm_connector *connector, bool force) { >>> + struct it6263 *it = connector_to_it6263(connector); >>> + >>> + return it6263_detect(it); >>> +} >>> + >>> +static const struct drm_connector_funcs it6263_connector_funcs = { >>> + .detect = it6263_connector_detect, >>> + .fill_modes = drm_helper_probe_single_connector_modes, >>> + .destroy = drm_connector_cleanup, >>> + .reset = drm_atomic_helper_connector_reset, >>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, >>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, >>> +}; >>> + >>> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, >>> +size_t len) { >>> + struct it6263 *it = data; >>> + struct regmap *regmap = it->hdmi_regmap; >>> + unsigned int start = (block % 2) * EDID_LENGTH; >>> + unsigned int segment = block >> 1; >>> + unsigned int count, val; >>> + int ret; >>> + >>> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); >>> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); >>> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); >>> + >>> + while (len) { >>> + /* clear DDC FIFO */ >>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); >>> + >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, >>> + val, val & DDC_DONE, >>> + 2000, 10000); >>> + if (ret) { >>> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); >>> + return ret; >>> + } >>> + >>> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; >>> + >>> + /* fire the read command */ >>> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); >>> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); >>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); >>> + >>> + start += count; >>> + len -= count; >>> + >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, >>> + val & (DDC_DONE | DDC_ERROR), >>> + 20000, 250000); >>> + if (ret && !(val & DDC_ERROR)) { >>> + dev_err(it->dev, "failed to read EDID:%d\n", ret); >>> + return ret; >>> + } >>> + >>> + if (val & DDC_ERROR) { >>> + dev_err(it->dev, "DDC error\n"); >>> + return -EIO; >>> + } >>> + >>> + /* cache to buffer */ >>> + for (; count > 0; count--) { >>> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); >>> + *(buf++) = val; >>> + } >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static int it6263_connector_get_modes(struct drm_connector >>> +*connector) { >>> + struct it6263 *it = connector_to_it6263(connector); >>> + const struct drm_edid *drm_edid; >>> + int count; >>> + >>> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); >>> + >>> + drm_edid_connector_update(connector, drm_edid); >>> + count = drm_edid_connector_add_modes(connector); >>> + >>> + drm_edid_free(drm_edid); >>> + >>> + return count; >>> +} >>> + >>> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { >>> + .get_modes = it6263_connector_get_modes, }; >>> + >>> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, >>> + struct drm_bridge_state *bridge_state, >>> + struct drm_crtc_state *crtc_state, >>> + struct drm_connector_state *conn_state) { >>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; >>> + >>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } >>> + >>> +static void >>> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, >>> + struct drm_bridge_state *old_bridge_state) { >>> + struct it6263 *it = bridge_to_it6263(bridge); >>> + >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); >>> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); >>> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, >>> + AFE_DRV_RST | AFE_DRV_PWD); >>> +} >>> + >>> +static void >>> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, >>> + struct drm_bridge_state *old_bridge_state) { >>> + struct drm_atomic_state *state = old_bridge_state->base.state; >>> + struct it6263 *it = bridge_to_it6263(bridge); >>> + const struct drm_crtc_state *crtc_state; >>> + struct regmap *regmap = it->hdmi_regmap; >>> + const struct drm_display_mode *mode; >>> + struct drm_connector *connector; >>> + bool is_stable = false; >>> + struct drm_crtc *crtc; >>> + unsigned int val; >>> + bool pclk_high; >>> + int i, ret; >>> + >>> + connector = drm_atomic_get_new_connector_for_encoder(state, >>> + bridge->encoder); >>> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; >>> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); >>> + mode = &crtc_state->adjusted_mode; >>> + >>> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); >>> + >>> + /* HDMI AFE setup */ >>> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; >>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); >>> + if (pclk_high) >>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >>> + AFE_XP_GAINBIT | AFE_XP_RESETB); >>> + else >>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, >>> + AFE_XP_ER0 | AFE_XP_RESETB); >>> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); >>> + if (pclk_high) >>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >>> + AFE_IP_GAINBIT | AFE_IP_RESETB); >>> + else >>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, >>> + AFE_IP_ER0 | AFE_IP_RESETB); >>> + >>> + /* HDMI software video reset */ >>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); >>> + fsleep(1000); >>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); >>> + >>> + /* reconfigure LVDS and retry several times in case video is instable */ >>> + for (i = 0; i < 3; i++) { >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, >>> + val & TXVIDSTABLE, >>> + 20000, 500000); >>> + if (!ret) { >>> + is_stable = true; >>> + break; >>> + } >>> + >>> + it6263_lvds_config(it); >>> + } >>> + >>> + if (!is_stable) >>> + dev_warn(it->dev, "failed to wait for video stable\n"); >>> + >>> + /* HDMI AFE reset release and power up */ >>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); >>> + >>> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); >>> + >>> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | >>> +REPEAT_PKT); } >>> + >>> +static enum drm_mode_status >>> +it6263_bridge_mode_valid(struct drm_bridge *bridge, >>> + const struct drm_display_info *info, >>> + const struct drm_display_mode *mode) { >>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : >>> +MODE_OK; } >>> + >>> +static int it6263_bridge_attach(struct drm_bridge *bridge, >>> + enum drm_bridge_attach_flags flags) { >>> + struct it6263 *it = bridge_to_it6263(bridge); >>> + int ret; >>> + >>> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, >>> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); >>> + if (ret < 0) >>> + return ret; >>> + >>> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) >>> + return 0; >>> + >>> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | >>> + DRM_CONNECTOR_POLL_DISCONNECT; >>> + >>> + ret = drm_connector_init(bridge->dev, &it->connector, >>> + &it6263_connector_funcs, >>> + DRM_MODE_CONNECTOR_HDMIA); >>> + if (ret) >>> + return ret; >>> + >>> + drm_connector_helper_add(&it->connector, >>> + &it6263_connector_helper_funcs); >>> + drm_connector_attach_encoder(&it->connector, bridge->encoder); >>> + >>> + return 0; >>> +} >>> + >>> +static enum drm_connector_status it6263_bridge_detect(struct >>> +drm_bridge >>> +*bridge) { >>> + struct it6263 *it = bridge_to_it6263(bridge); >>> + >>> + return it6263_detect(it); >>> +} >>> + >>> +static const struct drm_edid * >>> +it6263_bridge_edid_read(struct drm_bridge *bridge, >>> + struct drm_connector *connector) >>> +{ >>> + struct it6263 *it = bridge_to_it6263(bridge); >>> + >>> + return drm_edid_read_custom(connector, it6263_read_edid, it); } >>> + >>> +static u32 * >>> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, >>> + struct drm_bridge_state *bridge_state, >>> + struct drm_crtc_state *crtc_state, >>> + struct drm_connector_state *conn_state, >>> + u32 output_fmt, >>> + unsigned int *num_input_fmts) >>> +{ >>> + u32 *input_fmts; >>> + >>> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); >>> + if (!input_fmts) { >>> + *num_input_fmts = 0; >>> + return NULL; >>> + } >>> + >>> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; >> >> Why is it hardcoded? What about supporting VESA?? >> >>> + *num_input_fmts = 1; >>> + >>> + return input_fmts; >>> +} >>> + >>> +static const struct drm_bridge_funcs it6263_bridge_funcs = { >>> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, >>> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, >>> + .atomic_reset = drm_atomic_helper_bridge_reset, >>> + .attach = it6263_bridge_attach, >>> + .mode_valid = it6263_bridge_mode_valid, >>> + .atomic_disable = it6263_bridge_atomic_disable, >>> + .atomic_enable = it6263_bridge_atomic_enable, >>> + .atomic_check = it6263_bridge_atomic_check, >>> + .detect = it6263_bridge_detect, >>> + .edid_read = it6263_bridge_edid_read, >>> + .atomic_get_input_bus_fmts = >>> +it6263_bridge_atomic_get_input_bus_fmts, >>> +}; > > Like [1] > static const struct drm_bridge_funcs it6263_bridge_funcs = { > .attach = it6263_bridge_attach, > .mode_set = it6263_bridge_mode_set, > .disable = it6263_bridge_disable, > .enable = it6263_bridge_enable, > .get_edid = it6263_bridge_get_edid, > .detect = it6263_bridge_detect, > }; > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c?h=v6.12-rc1#n998 > > Is it not sufficient for your use case?? If we decide to document the LVDS data mapping in dt-binding, then it is practically ok to use the non-atomic callbacks like the adv7511 driver, otherwise, the atomic callbacks are required due to the bus format negotiation. > > Cheers, > Biju > >>> + >>> +static int it6263_probe(struct i2c_client *client) { >>> + struct device *dev = &client->dev; >>> + struct it6263 *it; >>> + int ret; >>> + >>> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); >>> + if (!it) >>> + return -ENOMEM; >>> + >>> + it->dev = dev; >>> + it->hdmi_i2c = client; >>> + >>> + it->hdmi_regmap = devm_regmap_init_i2c(client, >>> + &it6263_hdmi_regmap_config); >>> + if (IS_ERR(it->hdmi_regmap)) >>> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), >>> + "failed to init I2C regmap for HDMI\n"); >>> + >>> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); >>> + if (IS_ERR(it->reset_gpio)) >>> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), >>> + "failed to get reset gpio\n"); >>> + >>> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), >>> + it6263_supplies); >>> + if (ret) >>> + return dev_err_probe(dev, ret, "failed to get power supplies\n"); >>> + >>> + ret = it6263_parse_dt(it); >>> + if (ret) >>> + return ret; >>> + >>> + it6263_reset(it); >>> + >>> + ret = it6263_lvds_set_i2c_addr(it); >>> + if (ret) >>> + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); >>> + >>> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, >>> + LVDS_INPUT_CTRL_I2C_ADDR); >>> + if (IS_ERR(it->lvds_i2c)) >>> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), >>> + "failed to allocate I2C device for LVDS\n"); >> >> Maybe use action_or_reset and call i2c_unregister_device(); >> >>> + >>> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, >>> + &it6263_lvds_regmap_config); >>> + if (IS_ERR(it->lvds_regmap)) >>> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), >>> + "failed to init I2C regmap for LVDS\n"); >> >>> + >>> + it6263_lvds_config(it); >>> + it6263_hdmi_config(it); >> >>> + >>> + i2c_set_clientdata(client, it); >>> + >>> + it->bridge.funcs = &it6263_bridge_funcs; >>> + it->bridge.of_node = dev->of_node; >>> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; >> >> it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ?? >> >>> + drm_bridge_add(&it->bridge); >>> + >>> + return 0; >>> +} >>> + >>> +static void it6263_remove(struct i2c_client *client) { >>> + struct it6263 *it = i2c_get_clientdata(client); >>> + >>> + drm_bridge_remove(&it->bridge); >> >>> +} >>> + >>> +static const struct of_device_id it6263_of_match[] = { >>> + { .compatible = "ite,it6263", }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(of, it6263_of_match); >>> + >>> +static const struct i2c_device_id it6263_i2c_ids[] = { >>> + { "it6263", 0 }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); >>> + >>> +static struct i2c_driver it6263_driver = { >>> + .probe = it6263_probe, >>> + .remove = it6263_remove, >>> + .driver = { >>> + .name = "it6263", >>> + .of_match_table = it6263_of_match, >>> + }, >>> + .id_table = it6263_i2c_ids, >>> +}; >>> +module_i2c_driver(it6263_driver); >>> + >>> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); >>> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); >>> +MODULE_LICENSE("GPL"); >>> -- >>> 2.34.1 >>> >
On Wed, 9 Oct 2024 at 11:32, Liu Ying <victor.liu@nxp.com> wrote: > > On 09/30/2024, Biju Das wrote: > > Hi Liu, > > Hi Biju, > > > > >> -----Original Message----- > >> From: Biju Das > >> Sent: Monday, September 30, 2024 10:16 AM > >> Subject: RE: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > >> > >> Hi Liu, > >> > >> Thanks for the patch. > >> > >>> -----Original Message----- > >>> From: linux-arm-kernel <linux-arm-kernel-bounces@lists.infradead.org> > >>> On Behalf Of Liu Ying > >>> Sent: Monday, September 30, 2024 6:29 AM > >>> Subject: [PATCH 6/8] drm/bridge: Add ITE IT6263 LVDS to HDMI converter > >>> > >>> Add basic HDMI video output support. Currently, only RGB888 output > >>> pixel format is supported. At the LVDS input side, the driver > >>> supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. > >>> > >>> Product link: > >>> https://www.ite.com.tw/en/product/cate1/IT6263 > >>> > >>> Signed-off-by: Liu Ying <victor.liu@nxp.com> > >>> --- > >>> drivers/gpu/drm/bridge/Kconfig | 8 + > >>> drivers/gpu/drm/bridge/Makefile | 1 + > >>> drivers/gpu/drm/bridge/ite-it6263.c | 829 > >>> ++++++++++++++++++++++++++++ > >>> 3 files changed, 838 insertions(+) > >>> create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c > >>> > >>> diff --git a/drivers/gpu/drm/bridge/Kconfig > >>> b/drivers/gpu/drm/bridge/Kconfig index > >>> 3eb955333c80..93f99682a090 100644 > >>> --- a/drivers/gpu/drm/bridge/Kconfig > >>> +++ b/drivers/gpu/drm/bridge/Kconfig > >>> @@ -90,6 +90,14 @@ config DRM_FSL_LDB > >>> help > >>> Support for i.MX8MP DPI-to-LVDS on-SoC encoder. > >>> > >>> +config DRM_ITE_IT6263 > >>> + tristate "ITE IT6263 LVDS/HDMI bridge" > >>> + depends on OF > >>> + select DRM_KMS_HELPER > >>> + select REGMAP_I2C > >>> + help > >>> + ITE IT6263 LVDS to HDMI bridge chip driver. > >>> + > >>> config DRM_ITE_IT6505 > >>> tristate "ITE IT6505 DisplayPort bridge" > >>> depends on OF > >>> diff --git a/drivers/gpu/drm/bridge/Makefile > >>> b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd > >>> 100644 > >>> --- a/drivers/gpu/drm/bridge/Makefile > >>> +++ b/drivers/gpu/drm/bridge/Makefile > >>> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o > >>> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o > >>> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o > >>> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o > >>> +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o > >>> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o > >>> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o > >>> obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git > >>> a/drivers/gpu/drm/bridge/ite-it6263.c > >>> b/drivers/gpu/drm/bridge/ite-it6263.c > >>> new file mode 100644 > >>> index 000000000000..886588497bc1 > >>> --- /dev/null > >>> +++ b/drivers/gpu/drm/bridge/ite-it6263.c > >>> @@ -0,0 +1,829 @@ > >>> +// SPDX-License-Identifier: GPL-2.0 > >>> +/* > >>> + * Copyright 2024 NXP > >>> + */ > >>> + > >>> +#include <linux/bitfield.h> > >>> +#include <linux/bits.h> > >>> +#include <linux/delay.h> > >>> +#include <linux/gpio/consumer.h> > >>> +#include <linux/i2c.h> > >>> +#include <linux/media-bus-format.h> > >>> +#include <linux/module.h> > >>> +#include <linux/of.h> > >>> +#include <linux/regmap.h> > >>> +#include <linux/regulator/consumer.h> > >>> + > >>> +#include <drm/drm_atomic.h> > >>> +#include <drm/drm_atomic_helper.h> > >>> +#include <drm/drm_atomic_state_helper.h> #include <drm/drm_bridge.h> > >>> +#include <drm/drm_connector.h> #include <drm/drm_crtc.h> #include > >>> +<drm/drm_edid.h> #include <drm/drm_of.h> #include > >>> +<drm/drm_probe_helper.h> > >>> + > >>> +/* > >>> +--------------------------------------------------------------------- > >>> +-- > >>> +------ > >>> + * LVDS registers > >>> + */ > >>> + > >>> +/* LVDS software reset registers */ > >>> +#define LVDS_REG_05 0x05 > >>> +#define REG_SOFT_P_RST BIT(1) > >>> + > >>> +/* LVDS system configuration registers */ > >>> +/* 0x0b */ > >>> +#define LVDS_REG_0B 0x0b > >>> +#define REG_SSC_PCLK_RF BIT(0) > >>> +#define REG_LVDS_IN_SWAP BIT(1) > >>> + > >>> +/* LVDS test pattern gen control registers */ > >>> +/* 0x2c */ > >>> +#define LVDS_REG_2C 0x2c > >>> +#define REG_COL_DEP GENMASK(1, 0) > >>> +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) > >>> +#define OUT_MAP BIT(4) > >>> +#define JEIDA 0 > >>> +#define REG_DESSC_ENB BIT(6) > >>> +#define DMODE BIT(7) > >>> +#define DISO BIT(7) > >>> +#define SISO 0 > >>> + > >>> +#define LVDS_REG_3C 0x3c > >>> +#define LVDS_REG_3F 0x3f > >>> +#define LVDS_REG_47 0x47 > >>> +#define LVDS_REG_48 0x48 > >>> +#define LVDS_REG_4F 0x4f > >>> +#define LVDS_REG_52 0x52 > >>> + > >>> +/* > >>> +--------------------------------------------------------------------- > >>> +-- > >>> +------ > >>> + * HDMI registers are separated into three banks: > >>> + * 1) HDMI register common bank: 0x00 ~ 0x2f */ > >>> + > >>> +/* HDMI genernal registers */ > >>> +#define HDMI_REG_SW_RST 0x04 > >>> +#define SOFTREF_RST BIT(5) > >>> +#define SOFTA_RST BIT(4) > >>> +#define SOFTV_RST BIT(3) > >>> +#define AUD_RST BIT(2) > >>> +#define HDCP_RST BIT(0) > >>> +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ > >>> + AUD_RST | HDCP_RST) > >>> + > >>> +#define HDMI_REG_SYS_STATUS 0x0e > >>> +#define HPDETECT BIT(6) > >>> +#define TXVIDSTABLE BIT(4) > >>> + > >>> +#define HDMI_REG_BANK_CTRL 0x0f > >>> +#define REG_BANK_SEL BIT(0) > >>> + > >>> +/* HDMI System DDC control registers */ > >>> +#define HDMI_REG_DDC_MASTER_CTRL 0x10 > >>> +#define MASTER_SEL_HOST BIT(0) > >>> + > >>> +#define HDMI_REG_DDC_HEADER 0x11 > >>> + > >>> +#define HDMI_REG_DDC_REQOFF 0x12 > >>> +#define HDMI_REG_DDC_REQCOUNT 0x13 > >>> +#define HDMI_REG_DDC_EDIDSEG 0x14 > >>> + > >>> +#define HDMI_REG_DDC_CMD 0x15 > >>> +#define DDC_CMD_EDID_READ 0x3 > >>> +#define DDC_CMD_FIFO_CLR 0x9 > >>> + > >>> +#define HDMI_REG_DDC_STATUS 0x16 > >>> +#define DDC_DONE BIT(7) > >>> +#define DDC_NOACK BIT(5) > >>> +#define DDC_WAITBUS BIT(4) > >>> +#define DDC_ARBILOSE BIT(3) > >>> +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) > >>> + > >>> +#define HDMI_DDC_FIFO_BYTES 32 > >>> +#define HDMI_REG_DDC_READFIFO 0x17 > >>> +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ > >>> +#define HDMI_REG_LVDS_PORT_EN 0x1e > >>> +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 > >>> + > >>> +/* > >>> +--------------------------------------------------------------------- > >>> +-- > >>> +------ > >>> + * 2) HDMI register bank0: 0x30 ~ 0xff */ > >>> + > >>> +/* HDMI AFE registers */ > >>> +#define HDMI_REG_AFE_DRV_CTRL 0x61 > >>> +#define AFE_DRV_PWD BIT(5) > >>> +#define AFE_DRV_RST BIT(4) > >>> + > >>> +#define HDMI_REG_AFE_XP_CTRL 0x62 > >>> +#define AFE_XP_GAINBIT BIT(7) > >>> +#define AFE_XP_ER0 BIT(4) > >>> +#define AFE_XP_RESETB BIT(3) > >>> + > >>> +#define HDMI_REG_AFE_ISW_CTRL 0x63 > >>> + > >>> +#define HDMI_REG_AFE_IP_CTRL 0x64 > >>> +#define AFE_IP_GAINBIT BIT(7) > >>> +#define AFE_IP_ER0 BIT(3) > >>> +#define AFE_IP_RESETB BIT(2) > >>> + > >>> +/* HDMI input data format registers */ > >>> +#define HDMI_REG_INPUT_MODE 0x70 > >>> +#define IN_RGB 0x00 > >>> + > >>> +/* HDMI general control registers */ > >>> +#define HDMI_REG_HDMI_MODE 0xc0 > >>> +#define TX_HDMI_MODE BIT(0) > >>> + > >>> +#define HDMI_REG_GCP 0xc1 > >>> +#define AVMUTE BIT(0) > >>> +#define HDMI_COLOR_DEPTH GENMASK(6, 4) > >>> +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) > >>> + > >>> +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 > >>> +#define ENABLE_PKT BIT(0) > >>> +#define REPEAT_PKT BIT(1) > >>> + > >>> +/* > >>> +--------------------------------------------------------------------- > >>> +-- > >>> +------ > >>> + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) */ > >>> + > >>> +/* AVI packet registers */ > >>> +#define HDMI_REG_AVI_DB1 0x158 > >>> +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) > >>> +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) > >>> + > >>> +#define MAX_PIXEL_CLOCK_KHZ 150000 > >>> +#define HIGH_PIXEL_CLOCK_KHZ 80000 > >>> + > >>> +struct it6263 { > >>> + struct device *dev; > >>> + struct i2c_client *hdmi_i2c; > >>> + struct i2c_client *lvds_i2c; > >>> + struct regmap *hdmi_regmap; > >>> + struct regmap *lvds_regmap; > >>> + struct drm_bridge bridge; > >>> + struct drm_bridge *next_bridge; > >>> + struct drm_connector connector; > >>> + struct gpio_desc *reset_gpio; > >>> + bool lvds_dual_link; > >>> + bool lvds_link12_swap; > >>> +}; > >>> + > >>> +static inline struct it6263 *bridge_to_it6263(struct drm_bridge > >>> +*bridge) { > >>> + return container_of(bridge, struct it6263, bridge); } > >>> + > >>> +static inline struct it6263 *connector_to_it6263(struct drm_connector > >>> +*conn) { > >>> + return container_of(conn, struct it6263, connector); } > >>> + > >>> +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned > >>> +int > >>> +reg) { > >>> + switch (reg) { > >>> + case HDMI_REG_SW_RST: > >>> + case HDMI_REG_BANK_CTRL: > >>> + case HDMI_REG_DDC_MASTER_CTRL: > >>> + case HDMI_REG_DDC_HEADER: > >>> + case HDMI_REG_DDC_REQOFF: > >>> + case HDMI_REG_DDC_REQCOUNT: > >>> + case HDMI_REG_DDC_EDIDSEG: > >>> + case HDMI_REG_DDC_CMD: > >>> + case HDMI_REG_LVDS_PORT: > >>> + case HDMI_REG_LVDS_PORT_EN: > >>> + case HDMI_REG_AFE_DRV_CTRL: > >>> + case HDMI_REG_AFE_XP_CTRL: > >>> + case HDMI_REG_AFE_ISW_CTRL: > >>> + case HDMI_REG_AFE_IP_CTRL: > >>> + case HDMI_REG_INPUT_MODE: > >>> + case HDMI_REG_HDMI_MODE: > >>> + case HDMI_REG_GCP: > >>> + case HDMI_REG_PKT_GENERAL_CTRL: > >>> + case HDMI_REG_AVI_DB1: > >>> + return true; > >>> + default: > >>> + return false; > >>> + } > >>> +} > >>> + > >>> +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int > >>> +reg) { > >>> + if (it6263_hdmi_writeable_reg(dev, reg)) > >>> + return true; > >>> + > >>> + switch (reg) { > >>> + case HDMI_REG_SYS_STATUS: > >>> + case HDMI_REG_DDC_STATUS: > >>> + case HDMI_REG_DDC_READFIFO: > >>> + return true; > >>> + default: > >>> + return false; > >>> + } > >>> +} > >>> + > >>> +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int > >>> +reg) { > >>> + switch (reg) { > >>> + case HDMI_REG_SW_RST: > >>> + case HDMI_REG_SYS_STATUS: > >>> + case HDMI_REG_DDC_STATUS: > >>> + case HDMI_REG_DDC_READFIFO: > >>> + return true; > >>> + default: > >>> + return false; > >>> + } > >>> +} > >>> + > >>> +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { > >>> + .range_min = 0x00, > >>> + .range_max = HDMI_REG_AVI_DB1, > >>> + .selector_reg = HDMI_REG_BANK_CTRL, > >>> + .selector_mask = REG_BANK_SEL, > >>> + .selector_shift = 0, > >>> + .window_start = 0x00, > >>> + .window_len = 0x100, > >>> +}; > >>> + > >>> +static const struct regmap_config it6263_hdmi_regmap_config = { > >>> + .name = "it6263-hdmi", > >>> + .reg_bits = 8, > >>> + .val_bits = 8, > >>> + .writeable_reg = it6263_hdmi_writeable_reg, > >>> + .readable_reg = it6263_hdmi_readable_reg, > >>> + .volatile_reg = it6263_hdmi_volatile_reg, > >>> + .max_register = HDMI_REG_AVI_DB1, > >>> + .ranges = &it6263_hdmi_range_cfg, > >>> + .num_ranges = 1, > >>> + .cache_type = REGCACHE_MAPLE, > >>> +}; > >>> + > >>> +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned > >>> +int > >>> +reg) { > >>> + switch (reg) { > >>> + case LVDS_REG_05: > >>> + case LVDS_REG_0B: > >>> + case LVDS_REG_2C: > >>> + case LVDS_REG_3C: > >>> + case LVDS_REG_3F: > >>> + case LVDS_REG_47: > >>> + case LVDS_REG_48: > >>> + case LVDS_REG_4F: > >>> + case LVDS_REG_52: > >>> + return true; > >>> + default: > >>> + return false; > >>> + } > >>> +} > >>> + > >>> +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int > >>> +reg) { > >>> + return it6263_lvds_writeable_reg(dev, reg); } > >>> + > >>> +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int > >>> +reg) { > >>> + return reg == LVDS_REG_05; > >>> +} > >>> + > >>> +static const struct regmap_config it6263_lvds_regmap_config = { > >>> + .name = "it6263-lvds", > >>> + .reg_bits = 8, > >>> + .val_bits = 8, > >>> + .writeable_reg = it6263_lvds_writeable_reg, > >>> + .readable_reg = it6263_lvds_readable_reg, > >>> + .volatile_reg = it6263_lvds_volatile_reg, > >>> + .max_register = LVDS_REG_52, > >>> + .cache_type = REGCACHE_MAPLE, > >>> +}; > >>> + > >>> +static const char * const it6263_supplies[] = { > >>> + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", > >>> + "avcc", "anvdd", "apvdd" > >>> +}; > >>> + > >>> +static int it6263_parse_dt(struct it6263 *it) { > >>> + struct device *dev = it->dev; > >>> + struct device_node *port0, *port1; > >>> + int ret = 0; > >>> + > >>> + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); > >>> + if (IS_ERR(it->next_bridge)) > >>> + return dev_err_probe(dev, PTR_ERR(it->next_bridge), > >>> + "failed to get next bridge\n"); > >>> + > >>> + port0 = of_graph_get_port_by_id(dev->of_node, 0); > >>> + port1 = of_graph_get_port_by_id(dev->of_node, 1); > >>> + if (port0 && port1) { > >>> + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && > >>> + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { > >>> + it->lvds_dual_link = true; > >>> + it->lvds_link12_swap = true; > >>> + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && > >>> + of_property_read_bool(port1, "dual-lvds-even-pixels")) { > >>> + it->lvds_dual_link = true; > >>> + } > >>> + > >>> + if (!it->lvds_dual_link) { > >>> + dev_err(dev, > >>> + "failed to get LVDS dual link pixel order\n"); > >>> + ret = -EINVAL; > >>> + } > >>> + } else if (port1) { > >>> + ret = -EINVAL; > >>> + dev_err(dev, "single input LVDS port1 is not supported\n"); > >> > >> Are you supporting single input LVDS port0?? > >> > >>> + } else if (!port0) { > >>> + ret = -EINVAL; > >>> + dev_err(dev, "no input LVDS port\n"); > >>> + } > >>> + > >>> + of_node_put(port0); > >>> + of_node_put(port1); > >>> + > >>> + return ret; > >>> +} > >>> + > >>> +static inline void it6263_reset(struct it6263 *it) { > >>> + if (!it->reset_gpio) > >>> + return; > >>> + > >>> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >>> + fsleep(1000); > >>> + gpiod_set_value_cansleep(it->reset_gpio, 1); > >>> + /* The chip maker says the low pulse should be at least 40ms. */ > >>> + fsleep(40000); > >>> + gpiod_set_value_cansleep(it->reset_gpio, 0); > >>> + /* addtional time to wait the high voltage to be stable */ > >>> + fsleep(5000); > >> > >> What about other resets ?? > >> > >> /* AFE PLL reset and pclk reset */ > >> > >>> +} > >>> + > >>> +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) { > >>> + int ret; > >>> + > >>> + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, > >>> + LVDS_INPUT_CTRL_I2C_ADDR << 1); > >>> + if (ret) > >>> + return ret; > >>> + > >>> + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); > >>> +} > >>> + > >>> +static inline void it6263_lvds_reset(struct it6263 *it) { > >>> + /* AFE PLL reset */ > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); > >>> + fsleep(1000); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); > >>> + > >>> + /* software pixel clock domain reset */ > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, > >>> + REG_SOFT_P_RST); > >>> + fsleep(1000); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); > >>> + fsleep(10000); > >>> +} > >>> + > >>> +static inline void it6263_lvds_set_interface(struct it6263 *it) { > >>> + /* color depth */ > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); > >>> + /* output mapping */ > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); > >>> + > >>> + if (it->lvds_dual_link) { > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); > >>> + } else { > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); > >>> + } > >>> +} > >>> + > >>> +static inline void it6263_lvds_set_afe(struct it6263 *it) { > >>> + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); > >>> + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); > >>> + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); > >>> + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); > >>> + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); > >>> + > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, > >>> + REG_SSC_PCLK_RF); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, > >>> + REG_DESSC_ENB); > >>> +} > >>> + > >>> +static inline void it6263_lvds_sys_cfg(struct it6263 *it) { > >>> + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, > >>> + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); } > >>> + > >>> +static inline void it6263_lvds_config(struct it6263 *it) { > >>> + it6263_lvds_reset(it); > >>> + it6263_lvds_set_interface(it); > >>> + it6263_lvds_set_afe(it); > >>> + it6263_lvds_sys_cfg(it); > >>> +} > >>> + > >>> +static inline void it6263_hdmi_config(struct it6263 *it) { > >>> + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); > >>> + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); > >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, > >>> + HDMI_COLOR_DEPTH_24); > >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, > >>> + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); } > >>> + > >>> +static enum drm_connector_status it6263_detect(struct it6263 *it) { > >>> + unsigned int val; > >>> + > >>> + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); > >>> + if (val & HPDETECT) > >>> + return connector_status_connected; > >>> + else > >>> + return connector_status_disconnected; } > >>> + > >>> +static enum drm_connector_status > >>> +it6263_connector_detect(struct drm_connector *connector, bool force) { > >>> + struct it6263 *it = connector_to_it6263(connector); > >>> + > >>> + return it6263_detect(it); > >>> +} > >>> + > >>> +static const struct drm_connector_funcs it6263_connector_funcs = { > >>> + .detect = it6263_connector_detect, > >>> + .fill_modes = drm_helper_probe_single_connector_modes, > >>> + .destroy = drm_connector_cleanup, > >>> + .reset = drm_atomic_helper_connector_reset, > >>> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > >>> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > >>> +}; > >>> + > >>> +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, > >>> +size_t len) { > >>> + struct it6263 *it = data; > >>> + struct regmap *regmap = it->hdmi_regmap; > >>> + unsigned int start = (block % 2) * EDID_LENGTH; > >>> + unsigned int segment = block >> 1; > >>> + unsigned int count, val; > >>> + int ret; > >>> + > >>> + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); > >>> + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); > >>> + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); > >>> + > >>> + while (len) { > >>> + /* clear DDC FIFO */ > >>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); > >>> + > >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, > >>> + val, val & DDC_DONE, > >>> + 2000, 10000); > >>> + if (ret) { > >>> + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); > >>> + return ret; > >>> + } > >>> + > >>> + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; > >>> + > >>> + /* fire the read command */ > >>> + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); > >>> + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); > >>> + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); > >>> + > >>> + start += count; > >>> + len -= count; > >>> + > >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, > >>> + val & (DDC_DONE | DDC_ERROR), > >>> + 20000, 250000); > >>> + if (ret && !(val & DDC_ERROR)) { > >>> + dev_err(it->dev, "failed to read EDID:%d\n", ret); > >>> + return ret; > >>> + } > >>> + > >>> + if (val & DDC_ERROR) { > >>> + dev_err(it->dev, "DDC error\n"); > >>> + return -EIO; > >>> + } > >>> + > >>> + /* cache to buffer */ > >>> + for (; count > 0; count--) { > >>> + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); > >>> + *(buf++) = val; > >>> + } > >>> + } > >>> + > >>> + return 0; > >>> +} > >>> + > >>> +static int it6263_connector_get_modes(struct drm_connector > >>> +*connector) { > >>> + struct it6263 *it = connector_to_it6263(connector); > >>> + const struct drm_edid *drm_edid; > >>> + int count; > >>> + > >>> + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); > >>> + > >>> + drm_edid_connector_update(connector, drm_edid); > >>> + count = drm_edid_connector_add_modes(connector); > >>> + > >>> + drm_edid_free(drm_edid); > >>> + > >>> + return count; > >>> +} > >>> + > >>> +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { > >>> + .get_modes = it6263_connector_get_modes, }; > >>> + > >>> +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, > >>> + struct drm_bridge_state *bridge_state, > >>> + struct drm_crtc_state *crtc_state, > >>> + struct drm_connector_state *conn_state) { > >>> + struct drm_display_mode *mode = &crtc_state->adjusted_mode; > >>> + > >>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; } > >>> + > >>> +static void > >>> +it6263_bridge_atomic_disable(struct drm_bridge *bridge, > >>> + struct drm_bridge_state *old_bridge_state) { > >>> + struct it6263 *it = bridge_to_it6263(bridge); > >>> + > >>> + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); > >>> + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); > >>> + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, > >>> + AFE_DRV_RST | AFE_DRV_PWD); > >>> +} > >>> + > >>> +static void > >>> +it6263_bridge_atomic_enable(struct drm_bridge *bridge, > >>> + struct drm_bridge_state *old_bridge_state) { > >>> + struct drm_atomic_state *state = old_bridge_state->base.state; > >>> + struct it6263 *it = bridge_to_it6263(bridge); > >>> + const struct drm_crtc_state *crtc_state; > >>> + struct regmap *regmap = it->hdmi_regmap; > >>> + const struct drm_display_mode *mode; > >>> + struct drm_connector *connector; > >>> + bool is_stable = false; > >>> + struct drm_crtc *crtc; > >>> + unsigned int val; > >>> + bool pclk_high; > >>> + int i, ret; > >>> + > >>> + connector = drm_atomic_get_new_connector_for_encoder(state, > >>> + bridge->encoder); > >>> + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > >>> + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); > >>> + mode = &crtc_state->adjusted_mode; > >>> + > >>> + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); > >>> + > >>> + /* HDMI AFE setup */ > >>> + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; > >>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); > >>> + if (pclk_high) > >>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >>> + AFE_XP_GAINBIT | AFE_XP_RESETB); > >>> + else > >>> + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, > >>> + AFE_XP_ER0 | AFE_XP_RESETB); > >>> + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); > >>> + if (pclk_high) > >>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >>> + AFE_IP_GAINBIT | AFE_IP_RESETB); > >>> + else > >>> + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, > >>> + AFE_IP_ER0 | AFE_IP_RESETB); > >>> + > >>> + /* HDMI software video reset */ > >>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); > >>> + fsleep(1000); > >>> + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); > >>> + > >>> + /* reconfigure LVDS and retry several times in case video is instable */ > >>> + for (i = 0; i < 3; i++) { > >>> + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, > >>> + val & TXVIDSTABLE, > >>> + 20000, 500000); > >>> + if (!ret) { > >>> + is_stable = true; > >>> + break; > >>> + } > >>> + > >>> + it6263_lvds_config(it); > >>> + } > >>> + > >>> + if (!is_stable) > >>> + dev_warn(it->dev, "failed to wait for video stable\n"); > >>> + > >>> + /* HDMI AFE reset release and power up */ > >>> + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); > >>> + > >>> + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); > >>> + > >>> + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | > >>> +REPEAT_PKT); } > >>> + > >>> +static enum drm_mode_status > >>> +it6263_bridge_mode_valid(struct drm_bridge *bridge, > >>> + const struct drm_display_info *info, > >>> + const struct drm_display_mode *mode) { > >>> + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : > >>> +MODE_OK; } > >>> + > >>> +static int it6263_bridge_attach(struct drm_bridge *bridge, > >>> + enum drm_bridge_attach_flags flags) { > >>> + struct it6263 *it = bridge_to_it6263(bridge); > >>> + int ret; > >>> + > >>> + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, > >>> + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); > >>> + if (ret < 0) > >>> + return ret; > >>> + > >>> + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) > >>> + return 0; > >>> + > >>> + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | > >>> + DRM_CONNECTOR_POLL_DISCONNECT; > >>> + > >>> + ret = drm_connector_init(bridge->dev, &it->connector, > >>> + &it6263_connector_funcs, > >>> + DRM_MODE_CONNECTOR_HDMIA); > >>> + if (ret) > >>> + return ret; > >>> + > >>> + drm_connector_helper_add(&it->connector, > >>> + &it6263_connector_helper_funcs); > >>> + drm_connector_attach_encoder(&it->connector, bridge->encoder); > >>> + > >>> + return 0; > >>> +} > >>> + > >>> +static enum drm_connector_status it6263_bridge_detect(struct > >>> +drm_bridge > >>> +*bridge) { > >>> + struct it6263 *it = bridge_to_it6263(bridge); > >>> + > >>> + return it6263_detect(it); > >>> +} > >>> + > >>> +static const struct drm_edid * > >>> +it6263_bridge_edid_read(struct drm_bridge *bridge, > >>> + struct drm_connector *connector) > >>> +{ > >>> + struct it6263 *it = bridge_to_it6263(bridge); > >>> + > >>> + return drm_edid_read_custom(connector, it6263_read_edid, it); } > >>> + > >>> +static u32 * > >>> +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, > >>> + struct drm_bridge_state *bridge_state, > >>> + struct drm_crtc_state *crtc_state, > >>> + struct drm_connector_state *conn_state, > >>> + u32 output_fmt, > >>> + unsigned int *num_input_fmts) > >>> +{ > >>> + u32 *input_fmts; > >>> + > >>> + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); > >>> + if (!input_fmts) { > >>> + *num_input_fmts = 0; > >>> + return NULL; > >>> + } > >>> + > >>> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; > >> > >> Why is it hardcoded? What about supporting VESA?? > >> > >>> + *num_input_fmts = 1; > >>> + > >>> + return input_fmts; > >>> +} > >>> + > >>> +static const struct drm_bridge_funcs it6263_bridge_funcs = { > >>> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > >>> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > >>> + .atomic_reset = drm_atomic_helper_bridge_reset, > >>> + .attach = it6263_bridge_attach, > >>> + .mode_valid = it6263_bridge_mode_valid, > >>> + .atomic_disable = it6263_bridge_atomic_disable, > >>> + .atomic_enable = it6263_bridge_atomic_enable, > >>> + .atomic_check = it6263_bridge_atomic_check, > >>> + .detect = it6263_bridge_detect, > >>> + .edid_read = it6263_bridge_edid_read, > >>> + .atomic_get_input_bus_fmts = > >>> +it6263_bridge_atomic_get_input_bus_fmts, > >>> +}; > > > > Like [1] > > static const struct drm_bridge_funcs it6263_bridge_funcs = { > > .attach = it6263_bridge_attach, > > .mode_set = it6263_bridge_mode_set, > > .disable = it6263_bridge_disable, > > .enable = it6263_bridge_enable, > > .get_edid = it6263_bridge_get_edid, > > .detect = it6263_bridge_detect, > > }; > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c?h=v6.12-rc1#n998 > > > > Is it not sufficient for your use case?? > > If we decide to document the LVDS data mapping in dt-binding, > then it is practically ok to use the non-atomic callbacks like > the adv7511 driver, otherwise, the atomic callbacks are required > due to the bus format negotiation. Please use atomic callbacks, it's better even if it means more code. > > > > > Cheers, > > Biju > > > >>> + > >>> +static int it6263_probe(struct i2c_client *client) { > >>> + struct device *dev = &client->dev; > >>> + struct it6263 *it; > >>> + int ret; > >>> + > >>> + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); > >>> + if (!it) > >>> + return -ENOMEM; > >>> + > >>> + it->dev = dev; > >>> + it->hdmi_i2c = client; > >>> + > >>> + it->hdmi_regmap = devm_regmap_init_i2c(client, > >>> + &it6263_hdmi_regmap_config); > >>> + if (IS_ERR(it->hdmi_regmap)) > >>> + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), > >>> + "failed to init I2C regmap for HDMI\n"); > >>> + > >>> + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); > >>> + if (IS_ERR(it->reset_gpio)) > >>> + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), > >>> + "failed to get reset gpio\n"); > >>> + > >>> + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), > >>> + it6263_supplies); > >>> + if (ret) > >>> + return dev_err_probe(dev, ret, "failed to get power supplies\n"); > >>> + > >>> + ret = it6263_parse_dt(it); > >>> + if (ret) > >>> + return ret; > >>> + > >>> + it6263_reset(it); > >>> + > >>> + ret = it6263_lvds_set_i2c_addr(it); > >>> + if (ret) > >>> + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); > >>> + > >>> + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, > >>> + LVDS_INPUT_CTRL_I2C_ADDR); > >>> + if (IS_ERR(it->lvds_i2c)) > >>> + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), > >>> + "failed to allocate I2C device for LVDS\n"); > >> > >> Maybe use action_or_reset and call i2c_unregister_device(); > >> > >>> + > >>> + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, > >>> + &it6263_lvds_regmap_config); > >>> + if (IS_ERR(it->lvds_regmap)) > >>> + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), > >>> + "failed to init I2C regmap for LVDS\n"); > >> > >>> + > >>> + it6263_lvds_config(it); > >>> + it6263_hdmi_config(it); > >> > >>> + > >>> + i2c_set_clientdata(client, it); > >>> + > >>> + it->bridge.funcs = &it6263_bridge_funcs; > >>> + it->bridge.of_node = dev->of_node; > >>> + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; > >> > >> it->bridge.type = DRM_MODE_CONNECTOR_HDMIA; ?? > >> > >>> + drm_bridge_add(&it->bridge); > >>> + > >>> + return 0; > >>> +} > >>> + > >>> +static void it6263_remove(struct i2c_client *client) { > >>> + struct it6263 *it = i2c_get_clientdata(client); > >>> + > >>> + drm_bridge_remove(&it->bridge); > >> > >>> +} > >>> + > >>> +static const struct of_device_id it6263_of_match[] = { > >>> + { .compatible = "ite,it6263", }, > >>> + { } > >>> +}; > >>> +MODULE_DEVICE_TABLE(of, it6263_of_match); > >>> + > >>> +static const struct i2c_device_id it6263_i2c_ids[] = { > >>> + { "it6263", 0 }, > >>> + { } > >>> +}; > >>> +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); > >>> + > >>> +static struct i2c_driver it6263_driver = { > >>> + .probe = it6263_probe, > >>> + .remove = it6263_remove, > >>> + .driver = { > >>> + .name = "it6263", > >>> + .of_match_table = it6263_of_match, > >>> + }, > >>> + .id_table = it6263_i2c_ids, > >>> +}; > >>> +module_i2c_driver(it6263_driver); > >>> + > >>> +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); > >>> +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); > >>> +MODULE_LICENSE("GPL"); > >>> -- > >>> 2.34.1 > >>> > > > > -- > Regards, > Liu Ying >
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 3eb955333c80..93f99682a090 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -90,6 +90,14 @@ config DRM_FSL_LDB help Support for i.MX8MP DPI-to-LVDS on-SoC encoder. +config DRM_ITE_IT6263 + tristate "ITE IT6263 LVDS/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + help + ITE IT6263 LVDS to HDMI bridge chip driver. + config DRM_ITE_IT6505 tristate "ITE IT6505 DisplayPort bridge" depends on OF diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 7df87b582dca..f3776dd473fd 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o +obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o obj-$(CONFIG_DRM_LONTIUM_LT9211) += lontium-lt9211.o diff --git a/drivers/gpu/drm/bridge/ite-it6263.c b/drivers/gpu/drm/bridge/ite-it6263.c new file mode 100644 index 000000000000..886588497bc1 --- /dev/null +++ b/drivers/gpu/drm/bridge/ite-it6263.c @@ -0,0 +1,829 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2024 NXP + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_edid.h> +#include <drm/drm_of.h> +#include <drm/drm_probe_helper.h> + +/* ----------------------------------------------------------------------------- + * LVDS registers + */ + +/* LVDS software reset registers */ +#define LVDS_REG_05 0x05 +#define REG_SOFT_P_RST BIT(1) + +/* LVDS system configuration registers */ +/* 0x0b */ +#define LVDS_REG_0B 0x0b +#define REG_SSC_PCLK_RF BIT(0) +#define REG_LVDS_IN_SWAP BIT(1) + +/* LVDS test pattern gen control registers */ +/* 0x2c */ +#define LVDS_REG_2C 0x2c +#define REG_COL_DEP GENMASK(1, 0) +#define BIT8 FIELD_PREP(REG_COL_DEP, 2) +#define OUT_MAP BIT(4) +#define JEIDA 0 +#define REG_DESSC_ENB BIT(6) +#define DMODE BIT(7) +#define DISO BIT(7) +#define SISO 0 + +#define LVDS_REG_3C 0x3c +#define LVDS_REG_3F 0x3f +#define LVDS_REG_47 0x47 +#define LVDS_REG_48 0x48 +#define LVDS_REG_4F 0x4f +#define LVDS_REG_52 0x52 + +/* ----------------------------------------------------------------------------- + * HDMI registers are separated into three banks: + * 1) HDMI register common bank: 0x00 ~ 0x2f + */ + +/* HDMI genernal registers */ +#define HDMI_REG_SW_RST 0x04 +#define SOFTREF_RST BIT(5) +#define SOFTA_RST BIT(4) +#define SOFTV_RST BIT(3) +#define AUD_RST BIT(2) +#define HDCP_RST BIT(0) +#define HDMI_RST_ALL (SOFTREF_RST | SOFTA_RST | SOFTV_RST | \ + AUD_RST | HDCP_RST) + +#define HDMI_REG_SYS_STATUS 0x0e +#define HPDETECT BIT(6) +#define TXVIDSTABLE BIT(4) + +#define HDMI_REG_BANK_CTRL 0x0f +#define REG_BANK_SEL BIT(0) + +/* HDMI System DDC control registers */ +#define HDMI_REG_DDC_MASTER_CTRL 0x10 +#define MASTER_SEL_HOST BIT(0) + +#define HDMI_REG_DDC_HEADER 0x11 + +#define HDMI_REG_DDC_REQOFF 0x12 +#define HDMI_REG_DDC_REQCOUNT 0x13 +#define HDMI_REG_DDC_EDIDSEG 0x14 + +#define HDMI_REG_DDC_CMD 0x15 +#define DDC_CMD_EDID_READ 0x3 +#define DDC_CMD_FIFO_CLR 0x9 + +#define HDMI_REG_DDC_STATUS 0x16 +#define DDC_DONE BIT(7) +#define DDC_NOACK BIT(5) +#define DDC_WAITBUS BIT(4) +#define DDC_ARBILOSE BIT(3) +#define DDC_ERROR (DDC_NOACK | DDC_WAITBUS | DDC_ARBILOSE) + +#define HDMI_DDC_FIFO_BYTES 32 +#define HDMI_REG_DDC_READFIFO 0x17 +#define HDMI_REG_LVDS_PORT 0x1d /* LVDS input control I2C addr */ +#define HDMI_REG_LVDS_PORT_EN 0x1e +#define LVDS_INPUT_CTRL_I2C_ADDR 0x33 + +/* ----------------------------------------------------------------------------- + * 2) HDMI register bank0: 0x30 ~ 0xff + */ + +/* HDMI AFE registers */ +#define HDMI_REG_AFE_DRV_CTRL 0x61 +#define AFE_DRV_PWD BIT(5) +#define AFE_DRV_RST BIT(4) + +#define HDMI_REG_AFE_XP_CTRL 0x62 +#define AFE_XP_GAINBIT BIT(7) +#define AFE_XP_ER0 BIT(4) +#define AFE_XP_RESETB BIT(3) + +#define HDMI_REG_AFE_ISW_CTRL 0x63 + +#define HDMI_REG_AFE_IP_CTRL 0x64 +#define AFE_IP_GAINBIT BIT(7) +#define AFE_IP_ER0 BIT(3) +#define AFE_IP_RESETB BIT(2) + +/* HDMI input data format registers */ +#define HDMI_REG_INPUT_MODE 0x70 +#define IN_RGB 0x00 + +/* HDMI general control registers */ +#define HDMI_REG_HDMI_MODE 0xc0 +#define TX_HDMI_MODE BIT(0) + +#define HDMI_REG_GCP 0xc1 +#define AVMUTE BIT(0) +#define HDMI_COLOR_DEPTH GENMASK(6, 4) +#define HDMI_COLOR_DEPTH_24 FIELD_PREP(HDMI_COLOR_DEPTH, 4) + +#define HDMI_REG_PKT_GENERAL_CTRL 0xc6 +#define ENABLE_PKT BIT(0) +#define REPEAT_PKT BIT(1) + +/* ----------------------------------------------------------------------------- + * 3) HDMI register bank1: 0x130 ~ 0x1ff (HDMI packet registers) + */ + +/* AVI packet registers */ +#define HDMI_REG_AVI_DB1 0x158 +#define AVI_DB1_COLOR_SPACE GENMASK(6, 5) +#define AVI_COLOR_SPACE_RGB FIELD_PREP(AVI_DB1_COLOR_SPACE, 0) + +#define MAX_PIXEL_CLOCK_KHZ 150000 +#define HIGH_PIXEL_CLOCK_KHZ 80000 + +struct it6263 { + struct device *dev; + struct i2c_client *hdmi_i2c; + struct i2c_client *lvds_i2c; + struct regmap *hdmi_regmap; + struct regmap *lvds_regmap; + struct drm_bridge bridge; + struct drm_bridge *next_bridge; + struct drm_connector connector; + struct gpio_desc *reset_gpio; + bool lvds_dual_link; + bool lvds_link12_swap; +}; + +static inline struct it6263 *bridge_to_it6263(struct drm_bridge *bridge) +{ + return container_of(bridge, struct it6263, bridge); +} + +static inline struct it6263 *connector_to_it6263(struct drm_connector *conn) +{ + return container_of(conn, struct it6263, connector); +} + +static bool it6263_hdmi_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case HDMI_REG_SW_RST: + case HDMI_REG_BANK_CTRL: + case HDMI_REG_DDC_MASTER_CTRL: + case HDMI_REG_DDC_HEADER: + case HDMI_REG_DDC_REQOFF: + case HDMI_REG_DDC_REQCOUNT: + case HDMI_REG_DDC_EDIDSEG: + case HDMI_REG_DDC_CMD: + case HDMI_REG_LVDS_PORT: + case HDMI_REG_LVDS_PORT_EN: + case HDMI_REG_AFE_DRV_CTRL: + case HDMI_REG_AFE_XP_CTRL: + case HDMI_REG_AFE_ISW_CTRL: + case HDMI_REG_AFE_IP_CTRL: + case HDMI_REG_INPUT_MODE: + case HDMI_REG_HDMI_MODE: + case HDMI_REG_GCP: + case HDMI_REG_PKT_GENERAL_CTRL: + case HDMI_REG_AVI_DB1: + return true; + default: + return false; + } +} + +static bool it6263_hdmi_readable_reg(struct device *dev, unsigned int reg) +{ + if (it6263_hdmi_writeable_reg(dev, reg)) + return true; + + switch (reg) { + case HDMI_REG_SYS_STATUS: + case HDMI_REG_DDC_STATUS: + case HDMI_REG_DDC_READFIFO: + return true; + default: + return false; + } +} + +static bool it6263_hdmi_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case HDMI_REG_SW_RST: + case HDMI_REG_SYS_STATUS: + case HDMI_REG_DDC_STATUS: + case HDMI_REG_DDC_READFIFO: + return true; + default: + return false; + } +} + +static const struct regmap_range_cfg it6263_hdmi_range_cfg = { + .range_min = 0x00, + .range_max = HDMI_REG_AVI_DB1, + .selector_reg = HDMI_REG_BANK_CTRL, + .selector_mask = REG_BANK_SEL, + .selector_shift = 0, + .window_start = 0x00, + .window_len = 0x100, +}; + +static const struct regmap_config it6263_hdmi_regmap_config = { + .name = "it6263-hdmi", + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = it6263_hdmi_writeable_reg, + .readable_reg = it6263_hdmi_readable_reg, + .volatile_reg = it6263_hdmi_volatile_reg, + .max_register = HDMI_REG_AVI_DB1, + .ranges = &it6263_hdmi_range_cfg, + .num_ranges = 1, + .cache_type = REGCACHE_MAPLE, +}; + +static bool it6263_lvds_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case LVDS_REG_05: + case LVDS_REG_0B: + case LVDS_REG_2C: + case LVDS_REG_3C: + case LVDS_REG_3F: + case LVDS_REG_47: + case LVDS_REG_48: + case LVDS_REG_4F: + case LVDS_REG_52: + return true; + default: + return false; + } +} + +static bool it6263_lvds_readable_reg(struct device *dev, unsigned int reg) +{ + return it6263_lvds_writeable_reg(dev, reg); +} + +static bool it6263_lvds_volatile_reg(struct device *dev, unsigned int reg) +{ + return reg == LVDS_REG_05; +} + +static const struct regmap_config it6263_lvds_regmap_config = { + .name = "it6263-lvds", + .reg_bits = 8, + .val_bits = 8, + .writeable_reg = it6263_lvds_writeable_reg, + .readable_reg = it6263_lvds_readable_reg, + .volatile_reg = it6263_lvds_volatile_reg, + .max_register = LVDS_REG_52, + .cache_type = REGCACHE_MAPLE, +}; + +static const char * const it6263_supplies[] = { + "ivdd", "ovdd", "txavcc18", "txavcc33", "pvcc1", "pvcc2", + "avcc", "anvdd", "apvdd" +}; + +static int it6263_parse_dt(struct it6263 *it) +{ + struct device *dev = it->dev; + struct device_node *port0, *port1; + int ret = 0; + + it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0); + if (IS_ERR(it->next_bridge)) + return dev_err_probe(dev, PTR_ERR(it->next_bridge), + "failed to get next bridge\n"); + + port0 = of_graph_get_port_by_id(dev->of_node, 0); + port1 = of_graph_get_port_by_id(dev->of_node, 1); + if (port0 && port1) { + if (of_property_read_bool(port0, "dual-lvds-even-pixels") && + of_property_read_bool(port1, "dual-lvds-odd-pixels")) { + it->lvds_dual_link = true; + it->lvds_link12_swap = true; + } else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") && + of_property_read_bool(port1, "dual-lvds-even-pixels")) { + it->lvds_dual_link = true; + } + + if (!it->lvds_dual_link) { + dev_err(dev, + "failed to get LVDS dual link pixel order\n"); + ret = -EINVAL; + } + } else if (port1) { + ret = -EINVAL; + dev_err(dev, "single input LVDS port1 is not supported\n"); + } else if (!port0) { + ret = -EINVAL; + dev_err(dev, "no input LVDS port\n"); + } + + of_node_put(port0); + of_node_put(port1); + + return ret; +} + +static inline void it6263_reset(struct it6263 *it) +{ + if (!it->reset_gpio) + return; + + gpiod_set_value_cansleep(it->reset_gpio, 0); + fsleep(1000); + gpiod_set_value_cansleep(it->reset_gpio, 1); + /* The chip maker says the low pulse should be at least 40ms. */ + fsleep(40000); + gpiod_set_value_cansleep(it->reset_gpio, 0); + /* addtional time to wait the high voltage to be stable */ + fsleep(5000); +} + +static inline int it6263_lvds_set_i2c_addr(struct it6263 *it) +{ + int ret; + + ret = regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT, + LVDS_INPUT_CTRL_I2C_ADDR << 1); + if (ret) + return ret; + + return regmap_write(it->hdmi_regmap, HDMI_REG_LVDS_PORT_EN, BIT(0)); +} + +static inline void it6263_lvds_reset(struct it6263 *it) +{ + /* AFE PLL reset */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), 0x0); + fsleep(1000); + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, BIT(0), BIT(0)); + + /* software pixel clock domain reset */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, + REG_SOFT_P_RST); + fsleep(1000); + regmap_write_bits(it->lvds_regmap, LVDS_REG_05, REG_SOFT_P_RST, 0x0); + fsleep(10000); +} + +static inline void it6263_lvds_set_interface(struct it6263 *it) +{ + /* color depth */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_COL_DEP, BIT8); + /* output mapping */ + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, OUT_MAP, JEIDA); + + if (it->lvds_dual_link) { + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, DISO); + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), BIT(1)); + } else { + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, DMODE, SISO); + regmap_write_bits(it->lvds_regmap, LVDS_REG_52, BIT(1), 0); + } +} + +static inline void it6263_lvds_set_afe(struct it6263 *it) +{ + regmap_write(it->lvds_regmap, LVDS_REG_3C, 0xaa); + regmap_write(it->lvds_regmap, LVDS_REG_3F, 0x02); + regmap_write(it->lvds_regmap, LVDS_REG_47, 0xaa); + regmap_write(it->lvds_regmap, LVDS_REG_48, 0x02); + regmap_write(it->lvds_regmap, LVDS_REG_4F, 0x11); + + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_SSC_PCLK_RF, + REG_SSC_PCLK_RF); + regmap_write_bits(it->lvds_regmap, LVDS_REG_3C, 0x07, 0); + regmap_write_bits(it->lvds_regmap, LVDS_REG_2C, REG_DESSC_ENB, + REG_DESSC_ENB); +} + +static inline void it6263_lvds_sys_cfg(struct it6263 *it) +{ + regmap_write_bits(it->lvds_regmap, LVDS_REG_0B, REG_LVDS_IN_SWAP, + it->lvds_link12_swap ? REG_LVDS_IN_SWAP : 0); +} + +static inline void it6263_lvds_config(struct it6263 *it) +{ + it6263_lvds_reset(it); + it6263_lvds_set_interface(it); + it6263_lvds_set_afe(it); + it6263_lvds_sys_cfg(it); +} + +static inline void it6263_hdmi_config(struct it6263 *it) +{ + regmap_write(it->hdmi_regmap, HDMI_REG_SW_RST, HDMI_RST_ALL); + regmap_write(it->hdmi_regmap, HDMI_REG_INPUT_MODE, IN_RGB); + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, HDMI_COLOR_DEPTH, + HDMI_COLOR_DEPTH_24); + regmap_write_bits(it->hdmi_regmap, HDMI_REG_AVI_DB1, + AVI_DB1_COLOR_SPACE, AVI_COLOR_SPACE_RGB); +} + +static enum drm_connector_status it6263_detect(struct it6263 *it) +{ + unsigned int val; + + regmap_read(it->hdmi_regmap, HDMI_REG_SYS_STATUS, &val); + if (val & HPDETECT) + return connector_status_connected; + else + return connector_status_disconnected; +} + +static enum drm_connector_status +it6263_connector_detect(struct drm_connector *connector, bool force) +{ + struct it6263 *it = connector_to_it6263(connector); + + return it6263_detect(it); +} + +static const struct drm_connector_funcs it6263_connector_funcs = { + .detect = it6263_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int it6263_read_edid(void *data, u8 *buf, unsigned int block, size_t len) +{ + struct it6263 *it = data; + struct regmap *regmap = it->hdmi_regmap; + unsigned int start = (block % 2) * EDID_LENGTH; + unsigned int segment = block >> 1; + unsigned int count, val; + int ret; + + regmap_write(regmap, HDMI_REG_DDC_MASTER_CTRL, MASTER_SEL_HOST); + regmap_write(regmap, HDMI_REG_DDC_HEADER, DDC_ADDR << 1); + regmap_write(regmap, HDMI_REG_DDC_EDIDSEG, segment); + + while (len) { + /* clear DDC FIFO */ + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_FIFO_CLR); + + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, + val, val & DDC_DONE, + 2000, 10000); + if (ret) { + dev_err(it->dev, "failed to clear DDC FIFO:%d\n", ret); + return ret; + } + + count = len > HDMI_DDC_FIFO_BYTES ? HDMI_DDC_FIFO_BYTES : len; + + /* fire the read command */ + regmap_write(regmap, HDMI_REG_DDC_REQOFF, start); + regmap_write(regmap, HDMI_REG_DDC_REQCOUNT, count); + regmap_write(regmap, HDMI_REG_DDC_CMD, DDC_CMD_EDID_READ); + + start += count; + len -= count; + + ret = regmap_read_poll_timeout(regmap, HDMI_REG_DDC_STATUS, val, + val & (DDC_DONE | DDC_ERROR), + 20000, 250000); + if (ret && !(val & DDC_ERROR)) { + dev_err(it->dev, "failed to read EDID:%d\n", ret); + return ret; + } + + if (val & DDC_ERROR) { + dev_err(it->dev, "DDC error\n"); + return -EIO; + } + + /* cache to buffer */ + for (; count > 0; count--) { + regmap_read(regmap, HDMI_REG_DDC_READFIFO, &val); + *(buf++) = val; + } + } + + return 0; +} + +static int it6263_connector_get_modes(struct drm_connector *connector) +{ + struct it6263 *it = connector_to_it6263(connector); + const struct drm_edid *drm_edid; + int count; + + drm_edid = drm_edid_read_custom(connector, it6263_read_edid, it); + + drm_edid_connector_update(connector, drm_edid); + count = drm_edid_connector_add_modes(connector); + + drm_edid_free(drm_edid); + + return count; +} + +static const struct drm_connector_helper_funcs it6263_connector_helper_funcs = { + .get_modes = it6263_connector_get_modes, +}; + +static int it6263_bridge_atomic_check(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct drm_display_mode *mode = &crtc_state->adjusted_mode; + + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? -EINVAL : 0; +} + +static void +it6263_bridge_atomic_disable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + regmap_write_bits(it->hdmi_regmap, HDMI_REG_GCP, AVMUTE, AVMUTE); + regmap_write(it->hdmi_regmap, HDMI_REG_PKT_GENERAL_CTRL, 0); + regmap_write(it->hdmi_regmap, HDMI_REG_AFE_DRV_CTRL, + AFE_DRV_RST | AFE_DRV_PWD); +} + +static void +it6263_bridge_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct drm_atomic_state *state = old_bridge_state->base.state; + struct it6263 *it = bridge_to_it6263(bridge); + const struct drm_crtc_state *crtc_state; + struct regmap *regmap = it->hdmi_regmap; + const struct drm_display_mode *mode; + struct drm_connector *connector; + bool is_stable = false; + struct drm_crtc *crtc; + unsigned int val; + bool pclk_high; + int i, ret; + + connector = drm_atomic_get_new_connector_for_encoder(state, + bridge->encoder); + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; + crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + mode = &crtc_state->adjusted_mode; + + regmap_write(regmap, HDMI_REG_HDMI_MODE, TX_HDMI_MODE); + + /* HDMI AFE setup */ + pclk_high = mode->clock > HIGH_PIXEL_CLOCK_KHZ ? true : false; + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, AFE_DRV_RST); + if (pclk_high) + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, + AFE_XP_GAINBIT | AFE_XP_RESETB); + else + regmap_write(regmap, HDMI_REG_AFE_XP_CTRL, + AFE_XP_ER0 | AFE_XP_RESETB); + regmap_write(regmap, HDMI_REG_AFE_ISW_CTRL, 0x10); + if (pclk_high) + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, + AFE_IP_GAINBIT | AFE_IP_RESETB); + else + regmap_write(regmap, HDMI_REG_AFE_IP_CTRL, + AFE_IP_ER0 | AFE_IP_RESETB); + + /* HDMI software video reset */ + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, SOFTV_RST); + fsleep(1000); + regmap_write_bits(regmap, HDMI_REG_SW_RST, SOFTV_RST, 0); + + /* reconfigure LVDS and retry several times in case video is instable */ + for (i = 0; i < 3; i++) { + ret = regmap_read_poll_timeout(regmap, HDMI_REG_SYS_STATUS, val, + val & TXVIDSTABLE, + 20000, 500000); + if (!ret) { + is_stable = true; + break; + } + + it6263_lvds_config(it); + } + + if (!is_stable) + dev_warn(it->dev, "failed to wait for video stable\n"); + + /* HDMI AFE reset release and power up */ + regmap_write(regmap, HDMI_REG_AFE_DRV_CTRL, 0); + + regmap_write_bits(regmap, HDMI_REG_GCP, AVMUTE, 0); + + regmap_write(regmap, HDMI_REG_PKT_GENERAL_CTRL, ENABLE_PKT | REPEAT_PKT); +} + +static enum drm_mode_status +it6263_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + return mode->clock > MAX_PIXEL_CLOCK_KHZ ? MODE_CLOCK_HIGH : MODE_OK; +} + +static int it6263_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct it6263 *it = bridge_to_it6263(bridge); + int ret; + + ret = drm_bridge_attach(bridge->encoder, it->next_bridge, bridge, + flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (ret < 0) + return ret; + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) + return 0; + + it->connector.polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + + ret = drm_connector_init(bridge->dev, &it->connector, + &it6263_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + return ret; + + drm_connector_helper_add(&it->connector, + &it6263_connector_helper_funcs); + drm_connector_attach_encoder(&it->connector, bridge->encoder); + + return 0; +} + +static enum drm_connector_status it6263_bridge_detect(struct drm_bridge *bridge) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + return it6263_detect(it); +} + +static const struct drm_edid * +it6263_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct it6263 *it = bridge_to_it6263(bridge); + + return drm_edid_read_custom(connector, it6263_read_edid, it); +} + +static u32 * +it6263_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + + input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL); + if (!input_fmts) { + *num_input_fmts = 0; + return NULL; + } + + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA; + *num_input_fmts = 1; + + return input_fmts; +} + +static const struct drm_bridge_funcs it6263_bridge_funcs = { + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .attach = it6263_bridge_attach, + .mode_valid = it6263_bridge_mode_valid, + .atomic_disable = it6263_bridge_atomic_disable, + .atomic_enable = it6263_bridge_atomic_enable, + .atomic_check = it6263_bridge_atomic_check, + .detect = it6263_bridge_detect, + .edid_read = it6263_bridge_edid_read, + .atomic_get_input_bus_fmts = it6263_bridge_atomic_get_input_bus_fmts, +}; + +static int it6263_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct it6263 *it; + int ret; + + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); + if (!it) + return -ENOMEM; + + it->dev = dev; + it->hdmi_i2c = client; + + it->hdmi_regmap = devm_regmap_init_i2c(client, + &it6263_hdmi_regmap_config); + if (IS_ERR(it->hdmi_regmap)) + return dev_err_probe(dev, PTR_ERR(it->hdmi_regmap), + "failed to init I2C regmap for HDMI\n"); + + it->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(it->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(it->reset_gpio), + "failed to get reset gpio\n"); + + ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(it6263_supplies), + it6263_supplies); + if (ret) + return dev_err_probe(dev, ret, "failed to get power supplies\n"); + + ret = it6263_parse_dt(it); + if (ret) + return ret; + + it6263_reset(it); + + ret = it6263_lvds_set_i2c_addr(it); + if (ret) + return dev_err_probe(dev, ret, "failed to set I2C addr\n"); + + it->lvds_i2c = devm_i2c_new_dummy_device(dev, client->adapter, + LVDS_INPUT_CTRL_I2C_ADDR); + if (IS_ERR(it->lvds_i2c)) + dev_err_probe(it->dev, PTR_ERR(it->lvds_i2c), + "failed to allocate I2C device for LVDS\n"); + + it->lvds_regmap = devm_regmap_init_i2c(it->lvds_i2c, + &it6263_lvds_regmap_config); + if (IS_ERR(it->lvds_regmap)) + return dev_err_probe(dev, PTR_ERR(it->lvds_regmap), + "failed to init I2C regmap for LVDS\n"); + + it6263_lvds_config(it); + it6263_hdmi_config(it); + + i2c_set_clientdata(client, it); + + it->bridge.funcs = &it6263_bridge_funcs; + it->bridge.of_node = dev->of_node; + it->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT; + drm_bridge_add(&it->bridge); + + return 0; +} + +static void it6263_remove(struct i2c_client *client) +{ + struct it6263 *it = i2c_get_clientdata(client); + + drm_bridge_remove(&it->bridge); +} + +static const struct of_device_id it6263_of_match[] = { + { .compatible = "ite,it6263", }, + { } +}; +MODULE_DEVICE_TABLE(of, it6263_of_match); + +static const struct i2c_device_id it6263_i2c_ids[] = { + { "it6263", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, it6263_i2c_ids); + +static struct i2c_driver it6263_driver = { + .probe = it6263_probe, + .remove = it6263_remove, + .driver = { + .name = "it6263", + .of_match_table = it6263_of_match, + }, + .id_table = it6263_i2c_ids, +}; +module_i2c_driver(it6263_driver); + +MODULE_DESCRIPTION("ITE Tech. Inc. IT6263 LVDS/HDMI bridge"); +MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>"); +MODULE_LICENSE("GPL");
Add basic HDMI video output support. Currently, only RGB888 output pixel format is supported. At the LVDS input side, the driver supports single LVDS link and dual LVDS links with "jeida-24" LVDS mapping. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@nxp.com> --- drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/ite-it6263.c | 829 ++++++++++++++++++++++++++++ 3 files changed, 838 insertions(+) create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c