@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
- const: qcom,sm8150-dpu
+ enum:
+ - qcom,sm8150-dpu
+ - qcom,sm8250-dpu
reg:
items:
deleted file mode 100644
@@ -1,99 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SM8250 Display DPU
-
-maintainers:
- - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-
-$ref: /schemas/display/msm/dpu-common.yaml#
-
-properties:
- compatible:
- const: qcom,sm8250-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display ahb clock
- - description: Display hf axi clock
- - description: Display core clock
- - description: Display vsync clock
-
- clock-names:
- items:
- - const: iface
- - const: bus
- - const: core
- - const: vsync
-
-required:
- - compatible
- - reg
- - reg-names
- - clocks
- - clock-names
-
-unevaluatedProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
- #include <dt-bindings/clock/qcom,gcc-sm8250.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interconnect/qcom,sm8250.h>
- #include <dt-bindings/power/qcom,rpmhpd.h>
-
- display-controller@ae01000 {
- compatible = "qcom,sm8250-dpu";
- reg = <0x0ae01000 0x8f000>,
- <0x0aeb0000 0x2008>;
- reg-names = "mdp", "vbif";
-
- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>,
- <&dispcc DISP_CC_MDSS_MDP_CLK>,
- <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- clock-names = "iface", "bus", "core", "vsync";
-
- assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
- assigned-clock-rates = <19200000>;
-
- operating-points-v2 = <&mdp_opp_table>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
-
- interrupt-parent = <&mdss>;
- interrupts = <0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- endpoint {
- remote-endpoint = <&dsi0_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- endpoint {
- remote-endpoint = <&dsi1_in>;
- };
- };
- };
- };
-...
Split of the bindings was artificial and not helping - we end up with multiple binding files for very similar devices thus increasing the chances of using different order of reg and clocks entries. Unify DPU bindings of SM8150 and SM8250, because they are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/display/msm/qcom,sm8150-dpu.yaml | 4 +- .../bindings/display/msm/qcom,sm8250-dpu.yaml | 99 ---------------------- 2 files changed, 3 insertions(+), 100 deletions(-)