| Message ID | 20241002214517.206657-1-gonzalo.silvalde@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Subject: fbdev: sstfb: Make CONFIG_FB_DEVICE optional | expand |
Hi, thanks for your patch. > [PATCH] Subject: fbdev: sstfb: Make CONFIG_FB_DEVICE optional 'Subject:' should not be part of the subject line. Is that an issue with your mail setup? Am 02.10.24 um 23:45 schrieb Gonzalo Silvalde Blanco: > The sstfb driver currently depends on CONFIG_FB_DEVICE to create sysfs > entries and access info->dev. This patch wraps the relevant code blocks > with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used > even if CONFIG_FB_DEVICE is not selected. You should mention that the sysfs setting only controls VGA pass-through state and is not required for the display to work correctly. (See http://vogonswiki.com/index.php/VGA_passthrough_cable if you don't know what that means.) > > Tested by building with and without CONFIG_FB_DEVICE, both of which > compile without issues An empty lines goes before the tags. > Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com> > --- > drivers/video/fbdev/sstfb.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c > index f8ae54ca0cc3..17f39cc721aa 100644 > --- a/drivers/video/fbdev/sstfb.c > +++ b/drivers/video/fbdev/sstfb.c > @@ -716,6 +716,7 @@ static void sstfb_setvgapass( struct fb_info *info, int enable ) > pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp); > } > > +#ifdef CONFIG_FB_DEVICE > static ssize_t store_vgapass(struct device *device, struct device_attribute *attr, > const char *buf, size_t count) > { > @@ -736,10 +737,10 @@ static ssize_t show_vgapass(struct device *device, struct device_attribute *attr > struct sstfb_par *par = info->par; > return sprintf(buf, "%d\n", par->vgapass); > } > - > static struct device_attribute device_attrs[] = { > __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass) > }; > +#endif > > static int sstfb_ioctl(struct fb_info *info, unsigned int cmd, > unsigned long arg) > @@ -1435,10 +1436,10 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) > } > > sstfb_clear_screen(info); > - > + #ifdef CONFIG_FB_DEVICE No tab indention for #ifdef and #endif. Here and below. The patch should be good with the suggested changes. Please send an update. Best regards Thomas > if (device_create_file(info->dev, &device_attrs[0])) > printk(KERN_WARNING "sstfb: can't create sysfs entry.\n"); > - > + #endif > > fb_info(info, "%s frame buffer device at 0x%p\n", > fix->id, info->screen_base); > @@ -1467,8 +1468,9 @@ static void sstfb_remove(struct pci_dev *pdev) > > info = pci_get_drvdata(pdev); > par = info->par; > - > + #ifdef CONFIG_FB_DEVICE > device_remove_file(info->dev, &device_attrs[0]); > + #endif > sst_shutdown(info); > iounmap(info->screen_base); > iounmap(par->mmio_vbase);
diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c index f8ae54ca0cc3..17f39cc721aa 100644 --- a/drivers/video/fbdev/sstfb.c +++ b/drivers/video/fbdev/sstfb.c @@ -716,6 +716,7 @@ static void sstfb_setvgapass( struct fb_info *info, int enable ) pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp); } +#ifdef CONFIG_FB_DEVICE static ssize_t store_vgapass(struct device *device, struct device_attribute *attr, const char *buf, size_t count) { @@ -736,10 +737,10 @@ static ssize_t show_vgapass(struct device *device, struct device_attribute *attr struct sstfb_par *par = info->par; return sprintf(buf, "%d\n", par->vgapass); } - static struct device_attribute device_attrs[] = { __ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass) }; +#endif static int sstfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) @@ -1435,10 +1436,10 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id) } sstfb_clear_screen(info); - + #ifdef CONFIG_FB_DEVICE if (device_create_file(info->dev, &device_attrs[0])) printk(KERN_WARNING "sstfb: can't create sysfs entry.\n"); - + #endif fb_info(info, "%s frame buffer device at 0x%p\n", fix->id, info->screen_base); @@ -1467,8 +1468,9 @@ static void sstfb_remove(struct pci_dev *pdev) info = pci_get_drvdata(pdev); par = info->par; - + #ifdef CONFIG_FB_DEVICE device_remove_file(info->dev, &device_attrs[0]); + #endif sst_shutdown(info); iounmap(info->screen_base); iounmap(par->mmio_vbase);
The sstfb driver currently depends on CONFIG_FB_DEVICE to create sysfs entries and access info->dev. This patch wraps the relevant code blocks with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used even if CONFIG_FB_DEVICE is not selected. Tested by building with and without CONFIG_FB_DEVICE, both of which compile without issues Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com> --- drivers/video/fbdev/sstfb.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)