mbox series

[V2,0/2] X1E001DE Snapdragon Devkit for Windows

Message ID 20241005182250.788272-1-quic_sibis@quicinc.com (mailing list archive)
Headers show
Series X1E001DE Snapdragon Devkit for Windows | expand

Message

Sibi Sankar Oct. 5, 2024, 6:22 p.m. UTC
Add initial support for X1E001DE Snapdragon Devkit for Windows. X1E001DE
is the speed binned variant of X1E80100 that supports turbo boost up to
4.3 Ghz. The initial support includes the following:

-DSPs
-Ethernet (RTL8125BG) over the pcie 5 instance.
-NVme
-Wifi
-USB-C ports

V2:
* Fix Ghz -> GHz  [Jeff]
* Pick up Ab tag from Rob.
* Use Vendor in ADSP/CDSP firmware path [Dmitry]
* Fix reserved gpios [Dmitry]
* Only port0 supports DRD update the dt accordingly [Dmitry]

Link: https://www.qualcomm.com/news/releases/2024/05/qualcomm-accelerates-development-for-copilot--pcs-with-snapdrago

Sibi Sankar (2):
  dt-bindings: arm: qcom: Add Snapdragon Devkit for Windows
  arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts  | 811 ++++++++++++++++++
 3 files changed, 818 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts

Comments

Rob Herring (Arm) Oct. 7, 2024, 6:44 p.m. UTC | #1
On Sat, 05 Oct 2024 23:52:48 +0530, Sibi Sankar wrote:
> Add initial support for X1E001DE Snapdragon Devkit for Windows. X1E001DE
> is the speed binned variant of X1E80100 that supports turbo boost up to
> 4.3 Ghz. The initial support includes the following:
> 
> -DSPs
> -Ethernet (RTL8125BG) over the pcie 5 instance.
> -NVme
> -Wifi
> -USB-C ports
> 
> V2:
> * Fix Ghz -> GHz  [Jeff]
> * Pick up Ab tag from Rob.
> * Use Vendor in ADSP/CDSP firmware path [Dmitry]
> * Fix reserved gpios [Dmitry]
> * Only port0 supports DRD update the dt accordingly [Dmitry]
> 
> Link: https://www.qualcomm.com/news/releases/2024/05/qualcomm-accelerates-development-for-copilot--pcs-with-snapdrago
> 
> Sibi Sankar (2):
>   dt-bindings: arm: qcom: Add Snapdragon Devkit for Windows
>   arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows
> 
>  .../devicetree/bindings/arm/qcom.yaml         |   6 +
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  arch/arm64/boot/dts/qcom/x1e001de-devkit.dts  | 811 ++++++++++++++++++
>  3 files changed, 818 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
> 
> --
> 2.34.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/x1e001de-devkit.dtb' for 20241005182250.788272-1-quic_sibis@quicinc.com:

arch/arm64/boot/dts/qcom/x1e001de-devkit.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e001de-devkit.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e001de-devkit.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#