diff mbox series

[v10,4/5] drm/mediatek: ovl: Add blend_modes to driver data

Message ID 20241008064716.14670-5-jason-jh.lin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Fix degradation problem of alpha blending series | expand

Commit Message

Jason-JH.Lin Oct. 8, 2024, 6:47 a.m. UTC
OVL_CON_CLRFMT_MAN is a configuration for extending color format
settings of DISP_REG_OVL_CON(n).
It will change some of the original color format settings.

Take the settings of (3 << 12) for example.
- If OVL_CON_CLRFMT_MAN = 0 means OVL_CON_CLRFMT_RGBA8888.
- If OVL_CON_CLRFMT_MAN = 1 means OVL_CON_CLRFMT_PARGB8888.

Since previous SoCs did not support OVL_CON_CLRFMT_MAN, this means
that the SoC does not support the premultiplied color format.
It will break the original color format setting of MT8173.

Therefore, the blend_modes is added to the driver data and then
mtk_ovl_fmt_convert() will check the blend_modes to see if
pre-multiplied is supported in the current platform.
If it is not supported, use coverage mode to set it to the supported
color formats to solve the degradation problem.

Fixes: a3f7f7ef4bfe ("drm/mediatek: Support "Pre-multiplied" blending in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 34 ++++++++++++++++++++++---
 1 file changed, 31 insertions(+), 3 deletions(-)

Comments

Markus Elfring Oct. 8, 2024, 8:16 a.m. UTC | #1
> pre-multiplied is supported in the current platform.
…

                format would be?


Regards,
Markus
Jason-JH.Lin Oct. 9, 2024, 3:34 a.m. UTC | #2
On Tue, 2024-10-08 at 10:16 +0200, Markus Elfring wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  …
> > pre-multiplied is supported in the current platform.
> …
> 
>                 format would be?

Hi Markus,

blend_modes is the driver data that describes the supported blend mode
in current platform no matter format would be any one.

This sentence is describing mtk_ovl_fmt_convert() will check if the
blend_modes included BIT(DRM_MODE_BLEND_PREMULTI).

Regards,
Jason-JH.Lin

> 
> 
> Regards,
> Markus
Markus Elfring Oct. 9, 2024, 6:13 a.m. UTC | #3
>>  …
>>> pre-multiplied is supported in the current platform.
>> …
>>
>>                 format would be?> blend_modes is the driver data that describes the supported blend mode
> in current platform no matter format would be any one.
>
> This sentence is describing mtk_ovl_fmt_convert() will check if the
> blend_modes included BIT(DRM_MODE_BLEND_PREMULTI).
Do you see another opportunity to improve the change description
as I indicated?

Regards,
Markus
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 1ccb700858cf..fab23b1904bd 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -146,6 +146,7 @@  struct mtk_disp_ovl_data {
 	bool fmt_rgb565_is_0;
 	bool smi_id_en;
 	bool supports_afbc;
+	const u32 blend_modes;
 	const u32 *formats;
 	size_t num_formats;
 	bool supports_clrfmt_ext;
@@ -386,9 +387,27 @@  void mtk_ovl_layer_off(struct device *dev, unsigned int idx,
 		      DISP_REG_OVL_RDMA_CTRL(idx));
 }
 
-static unsigned int ovl_fmt_convert(struct mtk_disp_ovl *ovl, unsigned int fmt,
-				    unsigned int blend_mode)
+static unsigned int mtk_ovl_fmt_convert(struct mtk_disp_ovl *ovl,
+					struct mtk_plane_state *state)
 {
+	unsigned int fmt = state->pending.format;
+	unsigned int blend_mode = DRM_MODE_BLEND_COVERAGE;
+
+	/*
+	 * For the platforms where OVL_CON_CLRFMT_MAN is defined in the hardware data sheet
+	 * and supports premultiplied color formats, such as OVL_CON_CLRFMT_PARGB8888.
+	 *
+	 * Check blend_modes in the driver data to see if premultiplied mode is supported.
+	 * If not, use coverage mode instead to set it to the supported color formats.
+	 *
+	 * Current DRM assumption is that alpha is default premultiplied, so the bitmask of
+	 * blend_modes must include BIT(DRM_MODE_BLEND_PREMULTI). Otherwise, mtk_plane_init()
+	 * will get an error return from drm_plane_create_blend_mode_property() and
+	 * state->base.pixel_blend_mode should not be used.
+	 */
+	if (ovl->data->blend_modes & BIT(DRM_MODE_BLEND_PREMULTI))
+		blend_mode = state->base.pixel_blend_mode;
+
 	switch (fmt) {
 	default:
 	case DRM_FORMAT_RGB565:
@@ -466,7 +485,7 @@  void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 		return;
 	}
 
-	con = ovl_fmt_convert(ovl, fmt, blend_mode);
+	con = mtk_ovl_fmt_convert(ovl, state);
 	if (state->base.fb) {
 		con |= state->base.alpha & OVL_CON_ALPHA;
 
@@ -664,6 +683,9 @@  static const struct mtk_disp_ovl_data mt8192_ovl_driver_data = {
 	.layer_nr = 4,
 	.fmt_rgb565_is_0 = true,
 	.smi_id_en = true,
+	.blend_modes = BIT(DRM_MODE_BLEND_PREMULTI) |
+		       BIT(DRM_MODE_BLEND_COVERAGE) |
+		       BIT(DRM_MODE_BLEND_PIXEL_NONE),
 	.formats = mt8173_formats,
 	.num_formats = ARRAY_SIZE(mt8173_formats),
 };
@@ -674,6 +696,9 @@  static const struct mtk_disp_ovl_data mt8192_ovl_2l_driver_data = {
 	.layer_nr = 2,
 	.fmt_rgb565_is_0 = true,
 	.smi_id_en = true,
+	.blend_modes = BIT(DRM_MODE_BLEND_PREMULTI) |
+		       BIT(DRM_MODE_BLEND_COVERAGE) |
+		       BIT(DRM_MODE_BLEND_PIXEL_NONE),
 	.formats = mt8173_formats,
 	.num_formats = ARRAY_SIZE(mt8173_formats),
 };
@@ -685,6 +710,9 @@  static const struct mtk_disp_ovl_data mt8195_ovl_driver_data = {
 	.fmt_rgb565_is_0 = true,
 	.smi_id_en = true,
 	.supports_afbc = true,
+	.blend_modes = BIT(DRM_MODE_BLEND_PREMULTI) |
+		       BIT(DRM_MODE_BLEND_COVERAGE) |
+		       BIT(DRM_MODE_BLEND_PIXEL_NONE),
 	.formats = mt8195_formats,
 	.num_formats = ARRAY_SIZE(mt8195_formats),
 	.supports_clrfmt_ext = true,