| Message ID | 20241007-dcd-type2-upstream-v4-2-c261ee6eeded@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | DCD: Add support for Dynamic Capacity Devices (DCD) | expand |
On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > The use of struct range in the CXL subsystem is growing. In particular, > the addition of Dynamic Capacity devices uses struct range in a number > of places which are reported in debug and error messages. > > To wit requiring the printing of the start/end fields in each print > became cumbersome. Dan Williams mentions in [1] that it might be time > to have a print specifier for struct range similar to struct resource > > A few alternatives were considered including '%par', '%r', and '%pn'. > %pra follows that struct range is similar to struct resource (%p[rR]) > but need to be different. Based on discussions with Petr and Andy > '%pra' was chosen.[2] > > Andy also suggested to keep the range prints similar to struct resource > though combined code. Add hex_range() to handle printing for both > pointer types. ... > +static void __init > +struct_range(void) > +{ > + struct range test_range = { > + .start = 0xc0ffee00ba5eba11, > + .end = 0xc0ffee00ba5eba11, > + }; A side note, can we add something like #define DEFINE_RANGE(start, end) \ (struct range) { \ .start = (start), \ .end = (end), \ } in range.h and use here and in the similar cases? > + test("[range 0xc0ffee00ba5eba11]", "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xc0ffee, > + .end = 0xba5eba11, > + }; > + test("[range 0x0000000000c0ffee-0x00000000ba5eba11]", > + "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xba5eba11, > + .end = 0xc0ffee, > + }; > + test("[range 0x00000000ba5eba11-0x0000000000c0ffee]", > + "%pra", &test_range); > +} ... > +char *hex_range(char *buf, char *end, u64 start_val, u64 end_val, > + struct printf_spec spec) > +{ > + buf = number(buf, end, start_val, spec); > + if (start_val != end_val) { > + if (buf < end) > + *buf++ = '-'; > + buf = number(buf, end, end_val, spec); > + } > + return buf; > +} Perhaps buf = number(buf, end, start_val, spec); if (start_val == end_val) return buf; if (buf < end) *buf++ = '-'; return number(buf, end, end_val, spec); (yes, I have seen the original code)? > +static noinline_for_stack > +char *range_string(char *buf, char *end, const struct range *range, > + struct printf_spec spec, const char *fmt) > +{ > +#define RANGE_DECODED_BUF_SIZE ((2 * sizeof(struct range)) + 4) > +#define RANGE_PRINT_BUF_SIZE sizeof("[range -]") > + char sym[RANGE_DECODED_BUF_SIZE + RANGE_PRINT_BUF_SIZE]; > + char *p = sym, *pend = sym + sizeof(sym); > + > + struct printf_spec range_spec = { > + .field_width = 2 + 2 * sizeof(range->start), /* 0x + 2 * 8 */ > + .flags = SPECIAL | SMALL | ZEROPAD, > + .base = 16, > + .precision = -1, > + }; > + > + if (check_pointer(&buf, end, range, spec)) > + return buf; > + > + *p++ = '['; > + p = string_nocheck(p, pend, "range ", default_str_spec); > + p = hex_range(p, pend, range->start, range->end, range_spec); > + *p++ = ']'; > + *p = '\0'; > + > + return string_nocheck(buf, end, sym, spec); > +} ... > + * - 'ra' struct ranges [range 0x00 - 0xff] Is it possible to get only bytes out of this? I thought we have always 64-bit values here, no? ... > case 'B': > return symbol_string(buf, end, ptr, spec, fmt); > - case 'R': > case 'r': > + switch (fmt[1]) { > + case 'a': > + return range_string(buf, end, ptr, spec, fmt); > + } > + fallthrough; > + case 'R': > return resource_string(buf, end, ptr, spec, fmt); Do we have default-less switches in the code (in this file)? Actually I would suggest to move this to a wrapper like time_and_date().
On Tue, 8 Oct 2024 19:56:20 +0300 Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > > The use of struct range in the CXL subsystem is growing. In particular, > > the addition of Dynamic Capacity devices uses struct range in a number > > of places which are reported in debug and error messages. > > > > To wit requiring the printing of the start/end fields in each print > > became cumbersome. Dan Williams mentions in [1] that it might be time > > to have a print specifier for struct range similar to struct resource > > > > A few alternatives were considered including '%par', '%r', and '%pn'. > > %pra follows that struct range is similar to struct resource (%p[rR]) > > but need to be different. Based on discussions with Petr and Andy > > '%pra' was chosen.[2] > > > > Andy also suggested to keep the range prints similar to struct resource > > though combined code. Add hex_range() to handle printing for both > > pointer types. > > ... > > > +static void __init > > +struct_range(void) > > +{ > > + struct range test_range = { > > + .start = 0xc0ffee00ba5eba11, > > + .end = 0xc0ffee00ba5eba11, > > + }; > > A side note, can we add something like > > #define DEFINE_RANGE(start, end) \ > (struct range) { \ > .start = (start), \ > .end = (end), \ > } > > in range.h and use here and in the similar cases? DEFINE_XXXX at least sometimes is used in cases that create the variable as well. E.g. DEFINE_MUTEX() INIT_RANGE() maybe?
Ira Weiny <ira.weiny@intel.com> writes: > --- > Documentation/core-api/printk-formats.rst | 13 ++++++++ > lib/test_printf.c | 26 +++++++++++++++ > lib/vsprintf.c | 55 +++++++++++++++++++++++++++---- > 3 files changed, 88 insertions(+), 6 deletions(-) > > diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst > index 14e093da3ccd..03b102fc60bb 100644 > --- a/Documentation/core-api/printk-formats.rst > +++ b/Documentation/core-api/printk-formats.rst > @@ -231,6 +231,19 @@ width of the CPU data path. > > Passed by reference. > > +Struct Range > +------------ Probably neither of those words should be capitalized. > + > +:: > + > + %pra [range 0x0000000060000000-0x000000006fffffff] > + %pra [range 0x0000000060000000] > + > +For printing struct range. struct range holds an arbitrary range of u64 > +values. If start is equal to end only 1 value is printed. > + > +Passed by reference. > + > DMA address types dma_addr_t > ---------------------------- > > diff --git a/lib/test_printf.c b/lib/test_printf.c > index 5afdf5efc627..e3e75b6d10a0 100644 > --- a/lib/test_printf.c > +++ b/lib/test_printf.c > @@ -432,6 +432,31 @@ struct_resource(void) > "%pR", &test_resource); > } > > +static void __init > +struct_range(void) > +{ > + struct range test_range = { > + .start = 0xc0ffee00ba5eba11, > + .end = 0xc0ffee00ba5eba11, > + }; > + > + test("[range 0xc0ffee00ba5eba11]", "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xc0ffee, > + .end = 0xba5eba11, > + }; > + test("[range 0x0000000000c0ffee-0x00000000ba5eba11]", > + "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xba5eba11, > + .end = 0xc0ffee, > + }; > + test("[range 0x00000000ba5eba11-0x0000000000c0ffee]", > + "%pra", &test_range); > +} > + Thanks for including tests! Rather than the struct assignments, I think it's easier to read if you just do struct range r; r.start = 0xc0ffee00ba5eba11; r.end = r.start; ... r.start = 0xc0ffee; r.end = 0xba5eba11; ... which saves two lines per test and for the first one makes it more obvious that the start and end values are identical. > static void __init > addr(void) > { > @@ -807,6 +832,7 @@ test_pointer(void) > symbol_ptr(); > kernel_ptr(); > struct_resource(); > + struct_range(); > addr(); > escaped_str(); > hex_string(); > diff --git a/lib/vsprintf.c b/lib/vsprintf.c > index 09f022ba1c05..f8f5ed8f4d39 100644 > --- a/lib/vsprintf.c > +++ b/lib/vsprintf.c > @@ -1039,6 +1039,19 @@ static const struct printf_spec default_dec04_spec = { > .flags = ZEROPAD, > }; > > +static noinline_for_stack > +char *hex_range(char *buf, char *end, u64 start_val, u64 end_val, > + struct printf_spec spec) > +{ > + buf = number(buf, end, start_val, spec); > + if (start_val != end_val) { > + if (buf < end) > + *buf++ = '-'; No. Either all your callers pass a (probably stack-allocated) buffer which is guaranteed to be big enough, in which case you don't need the "if (buf < end)", or if some callers may "print" directly to the buffer passed to vsnprintf(), the buf++ must still be done unconditionally in order that vsnprintf(NULL, 0, ...) [used by fx kasprintf] can accurately determine how large the output string would be. So, either *buf++ = '-' or if (buf < end) *buf = '-'; buf++; Please don't mix the two. > + buf = number(buf, end, end_val, spec); > + } > + return buf; > +} > + > static noinline_for_stack > char *resource_string(char *buf, char *end, struct resource *res, > struct printf_spec spec, const char *fmt) > @@ -1115,11 +1128,7 @@ char *resource_string(char *buf, char *end, struct resource *res, > p = string_nocheck(p, pend, "size ", str_spec); > p = number(p, pend, resource_size(res), *specp); > } else { > - p = number(p, pend, res->start, *specp); > - if (res->start != res->end) { > - *p++ = '-'; > - p = number(p, pend, res->end, *specp); > - } > + p = hex_range(p, pend, res->start, res->end, *specp); > } > if (decode) { > if (res->flags & IORESOURCE_MEM_64) > @@ -1140,6 +1149,34 @@ char *resource_string(char *buf, char *end, struct resource *res, > return string_nocheck(buf, end, sym, spec); > } > > +static noinline_for_stack > +char *range_string(char *buf, char *end, const struct range *range, > + struct printf_spec spec, const char *fmt) > +{ > +#define RANGE_DECODED_BUF_SIZE ((2 * sizeof(struct range)) + 4) > +#define RANGE_PRINT_BUF_SIZE sizeof("[range -]") > + char sym[RANGE_DECODED_BUF_SIZE + RANGE_PRINT_BUF_SIZE]; I don't think these names or the split in two constants helps convincing that's the right amount. I have to think quite a bit to see that 2*sizeof is because struct range has two u64 and we're printing in hex so four-bits-per-char and probably the +4 are for two time "0x". Why not just size the buffer directly using an "example" string? char sym[sizeof("[range 0x0123456789abcdef-0x0123456789abcdef]")] > + char *p = sym, *pend = sym + sizeof(sym); > + > + struct printf_spec range_spec = { > + .field_width = 2 + 2 * sizeof(range->start), /* 0x + 2 * 8 */ > + .flags = SPECIAL | SMALL | ZEROPAD, > + .base = 16, > + .precision = -1, > + }; > + > + if (check_pointer(&buf, end, range, spec)) > + return buf; > + > + *p++ = '['; > + p = string_nocheck(p, pend, "range ", default_str_spec); We really should have mempcpy or stpcpy. I don't see the point of using string_nocheck here, or not including the [ in the string copy (however it's done). But yeah, without stpcpy() that's a bit awkward. Rasmus
On Wed, Oct 09, 2024 at 03:30:14PM +0200, Rasmus Villemoes wrote: ... > Rather than the struct assignments, I think it's easier to read if you > just do > > struct range r; > > r.start = 0xc0ffee00ba5eba11; > r.end = r.start; > ... > > r.start = 0xc0ffee; > r.end = 0xba5eba11; > ... > > which saves two lines per test and for the first one makes it more > obvious that the start and end values are identical. With DEFINE_RANGE() it will save even more lines! .. > > + if (buf < end) > > + *buf++ = '-'; > > No. Either all your callers pass a (probably stack-allocated) buffer > which is guaranteed to be big enough, in which case you don't need the > "if (buf < end)", or if some callers may "print" directly to the buffer > passed to vsnprintf(), the buf++ must still be done unconditionally in > order that vsnprintf(NULL, 0, ...) [used by fx kasprintf] can accurately > determine how large the output string would be. Ah, good catch, I would add... > So, either > > *buf++ = '-' > > or > > if (buf < end) > *buf = '-'; > buf++; ...that we use rather ++buf in such cases, but it doesn't really matter. > Please don't mix the two.
On Wed, Oct 09, 2024 at 01:27:37PM +0100, Jonathan Cameron wrote: > On Tue, 8 Oct 2024 19:56:20 +0300 > Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote: > > On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: ... > > > +static void __init > > > +struct_range(void) > > > +{ > > > + struct range test_range = { > > > + .start = 0xc0ffee00ba5eba11, > > > + .end = 0xc0ffee00ba5eba11, > > > + }; > > > > A side note, can we add something like > > > > #define DEFINE_RANGE(start, end) \ > > (struct range) { \ > > .start = (start), \ > > .end = (end), \ > > } > > > > in range.h and use here and in the similar cases? > > DEFINE_XXXX at least sometimes is used in cases that create the > variable as well. E.g. DEFINE_MUTEX() I understand your point, but since there are many similarities to struct resource, I would stick with naming convention in ioport.h. > INIT_RANGE() maybe?
On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > The use of struct range in the CXL subsystem is growing. In particular, > the addition of Dynamic Capacity devices uses struct range in a number > of places which are reported in debug and error messages. > > To wit requiring the printing of the start/end fields in each print > became cumbersome. Dan Williams mentions in [1] that it might be time > to have a print specifier for struct range similar to struct resource > > A few alternatives were considered including '%par', '%r', and '%pn'. > %pra follows that struct range is similar to struct resource (%p[rR]) > but need to be different. Based on discussions with Petr and Andy > '%pra' was chosen.[2] > > Andy also suggested to keep the range prints similar to struct resource > though combined code. Add hex_range() to handle printing for both > pointer types. > > To: Petr Mladek <pmladek@suse.com> > To: Steven Rostedt <rostedt@goodmis.org> > To: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > To: Rasmus Villemoes <linux@rasmusvillemoes.dk> > To: Sergey Senozhatsky <senozhatsky@chromium.org> > To: Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION) > Cc: linux-doc@vger.kernel.org > Cc: linux-kernel@vger.kernel.org (open list) > Link: https://lore.kernel.org/all/663922b475e50_d54d72945b@dwillia2-xfh.jf.intel.com.notmuch/ [1] > Link: https://lore.kernel.org/all/66cea3bf3332f_f937b29424@iweiny-mobl.notmuch/ [2] > Suggested-by: "Dan Williams" <dan.j.williams@intel.com> > Signed-off-by: Ira Weiny <ira.weiny@intel.com> > > --- > Changes: > [Andy: create new hex_range() and use it in both range/resource] > [Petr/Andy: Use %pra] > [Andy: Add test case start > end] > [Petr: Update documentation] > [Petr: use 'range -'] > [Petr: fixup printf_spec specifiers] > [Petr: add lib/test_printf test] > --- > Documentation/core-api/printk-formats.rst | 13 ++++++++ > lib/test_printf.c | 26 +++++++++++++++ > lib/vsprintf.c | 55 +++++++++++++++++++++++++++---- > 3 files changed, 88 insertions(+), 6 deletions(-) > > diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst > index 14e093da3ccd..03b102fc60bb 100644 > --- a/Documentation/core-api/printk-formats.rst > +++ b/Documentation/core-api/printk-formats.rst > @@ -231,6 +231,19 @@ width of the CPU data path. > > Passed by reference. > > +Struct Range > +------------ > + > +:: > + > + %pra [range 0x0000000060000000-0x000000006fffffff] > + %pra [range 0x0000000060000000] > + > +For printing struct range. struct range holds an arbitrary range of u64 > +values. If start is equal to end only 1 value is printed. > + > +Passed by reference. > + > DMA address types dma_addr_t > ---------------------------- > > diff --git a/lib/test_printf.c b/lib/test_printf.c > index 5afdf5efc627..e3e75b6d10a0 100644 > --- a/lib/test_printf.c > +++ b/lib/test_printf.c > @@ -432,6 +432,31 @@ struct_resource(void) > "%pR", &test_resource); > } > > +static void __init > +struct_range(void) > +{ > + struct range test_range = { > + .start = 0xc0ffee00ba5eba11, > + .end = 0xc0ffee00ba5eba11, > + }; > + > + test("[range 0xc0ffee00ba5eba11]", "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xc0ffee, > + .end = 0xba5eba11, > + }; > + test("[range 0x0000000000c0ffee-0x00000000ba5eba11]", > + "%pra", &test_range); > + > + test_range = (struct range) { > + .start = 0xba5eba11, > + .end = 0xc0ffee, > + }; > + test("[range 0x00000000ba5eba11-0x0000000000c0ffee]", > + "%pra", &test_range); > +} > + ... > static noinline_for_stack > char *hex_string(char *buf, char *end, u8 *addr, struct printf_spec spec, > const char *fmt) > @@ -2277,6 +2314,7 @@ char *rust_fmt_argument(char *buf, char *end, void *ptr); > * - 'Bb' as above with module build ID (for use in backtraces) > * - 'R' For decoded struct resource, e.g., [mem 0x0-0x1f 64bit pref] > * - 'r' For raw struct resource, e.g., [mem 0x0-0x1f flags 0x201] > + * - 'ra' struct ranges [range 0x00 - 0xff] Maybe follow the existing examples here, like 'ra" For struct ranges, e.g., ... fan > * - 'b[l]' For a bitmap, the number of bits is determined by the field > * width which must be explicitly specified either as part of the > * format string '%32b[l]' or through '%*b[l]', [l] selects > @@ -2399,8 +2437,13 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, > fallthrough; > case 'B': > return symbol_string(buf, end, ptr, spec, fmt); > - case 'R': > case 'r': > + switch (fmt[1]) { > + case 'a': > + return range_string(buf, end, ptr, spec, fmt); > + } > + fallthrough; > + case 'R': > return resource_string(buf, end, ptr, spec, fmt); > case 'h': > return hex_string(buf, end, ptr, spec, fmt); > > -- > 2.46.0 >
On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > +Struct Range > +------------ > + > +:: > + > + %pra [range 0x0000000060000000-0x000000006fffffff] > + %pra [range 0x0000000060000000] > + > +For printing struct range. struct range holds an arbitrary range of u64 > +values. If start is equal to end only 1 value is printed. Do you mean printing only start value in start=equal case? Confused...
Rasmus Villemoes wrote: > Ira Weiny <ira.weiny@intel.com> writes: > > > --- > > Documentation/core-api/printk-formats.rst | 13 ++++++++ > > lib/test_printf.c | 26 +++++++++++++++ > > lib/vsprintf.c | 55 +++++++++++++++++++++++++++---- > > 3 files changed, 88 insertions(+), 6 deletions(-) > > > > diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst > > index 14e093da3ccd..03b102fc60bb 100644 > > --- a/Documentation/core-api/printk-formats.rst > > +++ b/Documentation/core-api/printk-formats.rst > > @@ -231,6 +231,19 @@ width of the CPU data path. > > > > Passed by reference. > > > > +Struct Range > > +------------ > > Probably neither of those words should be capitalized. I was following the format of the header of struct resource Struct Resources ---------------- I can change it but I was trying to be consistent here. [snip] > > +static void __init > > +struct_range(void) > > +{ > > + struct range test_range = { > > + .start = 0xc0ffee00ba5eba11, > > + .end = 0xc0ffee00ba5eba11, > > + }; > > + > > + test("[range 0xc0ffee00ba5eba11]", "%pra", &test_range); > > + > > + test_range = (struct range) { > > + .start = 0xc0ffee, > > + .end = 0xba5eba11, > > + }; > > + test("[range 0x0000000000c0ffee-0x00000000ba5eba11]", > > + "%pra", &test_range); > > + > > + test_range = (struct range) { > > + .start = 0xba5eba11, > > + .end = 0xc0ffee, > > + }; > > + test("[range 0x00000000ba5eba11-0x0000000000c0ffee]", > > + "%pra", &test_range); > > +} > > + > > Thanks for including tests! > > Rather than the struct assignments, I think it's easier to read if you > just do I'm using Andy's suggestion of DEFINE_RANGE() > > struct range r; > > r.start = 0xc0ffee00ba5eba11; > r.end = r.start; > ... > > r.start = 0xc0ffee; > r.end = 0xba5eba11; > ... > > which saves two lines per test and for the first one makes it more > obvious that the start and end values are identical. > > > static void __init > > addr(void) > > { > > @@ -807,6 +832,7 @@ test_pointer(void) > > symbol_ptr(); > > kernel_ptr(); > > struct_resource(); > > + struct_range(); > > addr(); > > escaped_str(); > > hex_string(); > > diff --git a/lib/vsprintf.c b/lib/vsprintf.c > > index 09f022ba1c05..f8f5ed8f4d39 100644 > > --- a/lib/vsprintf.c > > +++ b/lib/vsprintf.c > > @@ -1039,6 +1039,19 @@ static const struct printf_spec default_dec04_spec = { > > .flags = ZEROPAD, > > }; > > > > +static noinline_for_stack > > +char *hex_range(char *buf, char *end, u64 start_val, u64 end_val, > > + struct printf_spec spec) > > +{ > > + buf = number(buf, end, start_val, spec); > > + if (start_val != end_val) { > > + if (buf < end) > > + *buf++ = '-'; > > No. Either all your callers pass a (probably stack-allocated) buffer > which is guaranteed to be big enough, in which case you don't need the > "if (buf < end)", or if some callers may "print" directly to the buffer > passed to vsnprintf(), the buf++ must still be done unconditionally in > order that vsnprintf(NULL, 0, ...) [used by fx kasprintf] can accurately > determine how large the output string would be. > > So, either > > *buf++ = '-' > > or > > if (buf < end) > *buf = '-'; > buf++; > > Please don't mix the two. Ah ok yea fixed building on Andy's comment. diff --git a/lib/vsprintf.c b/lib/vsprintf.c index a7b5e4618f6a..7aa47f7d9d5b 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1048,7 +1048,8 @@ char *hex_range(char *buf, char *end, u64 start_val, u64 end_val, return buf; if (buf < end) - *buf++ = '-'; + *buf = '-'; + ++buf; return number(buf, end, end_val, spec); } > > > > > + buf = number(buf, end, end_val, spec); > > + } > > + return buf; > > +} > > + > > static noinline_for_stack > > char *resource_string(char *buf, char *end, struct resource *res, > > struct printf_spec spec, const char *fmt) > > @@ -1115,11 +1128,7 @@ char *resource_string(char *buf, char *end, struct resource *res, > > p = string_nocheck(p, pend, "size ", str_spec); > > p = number(p, pend, resource_size(res), *specp); > > } else { > > - p = number(p, pend, res->start, *specp); > > - if (res->start != res->end) { > > - *p++ = '-'; > > - p = number(p, pend, res->end, *specp); > > - } > > + p = hex_range(p, pend, res->start, res->end, *specp); > > } > > if (decode) { > > if (res->flags & IORESOURCE_MEM_64) > > @@ -1140,6 +1149,34 @@ char *resource_string(char *buf, char *end, struct resource *res, > > return string_nocheck(buf, end, sym, spec); > > } > > > > +static noinline_for_stack > > +char *range_string(char *buf, char *end, const struct range *range, > > + struct printf_spec spec, const char *fmt) > > +{ > > +#define RANGE_DECODED_BUF_SIZE ((2 * sizeof(struct range)) + 4) > > +#define RANGE_PRINT_BUF_SIZE sizeof("[range -]") > > + char sym[RANGE_DECODED_BUF_SIZE + RANGE_PRINT_BUF_SIZE]; > > I don't think these names or the split in two constants helps > convincing that's the right amount. I have to think quite a bit to see > that 2*sizeof is because struct range has two u64 and we're printing in > hex so four-bits-per-char and probably the +4 are for two time "0x". Yea. > > Why not just size the buffer directly using an "example" string? > > char sym[sizeof("[range 0x0123456789abcdef-0x0123456789abcdef]")] Ok that is simpler. > > > + char *p = sym, *pend = sym + sizeof(sym); > > + > > + struct printf_spec range_spec = { > > + .field_width = 2 + 2 * sizeof(range->start), /* 0x + 2 * 8 */ > > + .flags = SPECIAL | SMALL | ZEROPAD, > > + .base = 16, > > + .precision = -1, > > + }; > > + > > + if (check_pointer(&buf, end, range, spec)) > > + return buf; > > + > > + *p++ = '['; > > + p = string_nocheck(p, pend, "range ", default_str_spec); > > We really should have mempcpy or stpcpy. I don't see the point of using > string_nocheck here, or not including the [ in the string copy (however > it's done). But yeah, without stpcpy() that's a bit awkward. Added '[' to the string. The prevalent use of string_nocheck() seems reasonable to me but it is pretty heavyweight for this case. Ira
Andy Shevchenko wrote: > On Wed, Oct 09, 2024 at 03:30:14PM +0200, Rasmus Villemoes wrote: > > ... > > > Rather than the struct assignments, I think it's easier to read if you > > just do > > > > struct range r; > > > > r.start = 0xc0ffee00ba5eba11; > > r.end = r.start; > > ... > > > > r.start = 0xc0ffee; > > r.end = 0xba5eba11; > > ... > > > > which saves two lines per test and for the first one makes it more > > obvious that the start and end values are identical. > > With DEFINE_RANGE() it will save even more lines! Yea I've added DEFINE_RANGE(). Thanks. > > .. > > > > + if (buf < end) > > > + *buf++ = '-'; > > > > No. Either all your callers pass a (probably stack-allocated) buffer > > which is guaranteed to be big enough, in which case you don't need the > > "if (buf < end)", or if some callers may "print" directly to the buffer > > passed to vsnprintf(), the buf++ must still be done unconditionally in > > order that vsnprintf(NULL, 0, ...) [used by fx kasprintf] can accurately > > determine how large the output string would be. > > Ah, good catch, I would add... > > > So, either > > > > *buf++ = '-' > > > > or > > > > if (buf < end) > > *buf = '-'; > > buf++; > > ...that we use rather ++buf in such cases, but it doesn't really matter. Done. Ira
Bagas Sanjaya wrote: > On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > > +Struct Range > > +------------ > > + > > +:: > > + > > + %pra [range 0x0000000060000000-0x000000006fffffff] > > + %pra [range 0x0000000060000000] > > + > > +For printing struct range. struct range holds an arbitrary range of u64 > > +values. If start is equal to end only 1 value is printed. > > Do you mean printing only start value in start=equal case? Yes I'll change the verbiage. Ira diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 03b102fc60bb..e1ebf0376154 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -240,7 +240,7 @@ Struct Range %pra [range 0x0000000060000000] For printing struct range. struct range holds an arbitrary range of u64 -values. If start is equal to end only 1 value is printed. +values. If start is equal to end only print the start value. Passed by reference.
On Thu, Oct 17, 2024 at 03:57:50PM -0500, Ira Weiny wrote: > Bagas Sanjaya wrote: > > On Mon, Oct 07, 2024 at 06:16:08PM -0500, Ira Weiny wrote: > > > +Struct Range > > > +------------ > > > + > > > +:: > > > + > > > + %pra [range 0x0000000060000000-0x000000006fffffff] > > > + %pra [range 0x0000000060000000] > > > + > > > +For printing struct range. struct range holds an arbitrary range of u64 > > > +values. If start is equal to end only 1 value is printed. > > > > Do you mean printing only start value in start=equal case? > > Yes I'll change the verbiage. > > Ira > > diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst > index 03b102fc60bb..e1ebf0376154 100644 > --- a/Documentation/core-api/printk-formats.rst > +++ b/Documentation/core-api/printk-formats.rst > @@ -240,7 +240,7 @@ Struct Range > %pra [range 0x0000000060000000] > > For printing struct range. struct range holds an arbitrary range of u64 > -values. If start is equal to end only 1 value is printed. > +values. If start is equal to end only print the start value. > > Passed by reference. That's nice, thanks!
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 14e093da3ccd..03b102fc60bb 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -231,6 +231,19 @@ width of the CPU data path. Passed by reference. +Struct Range +------------ + +:: + + %pra [range 0x0000000060000000-0x000000006fffffff] + %pra [range 0x0000000060000000] + +For printing struct range. struct range holds an arbitrary range of u64 +values. If start is equal to end only 1 value is printed. + +Passed by reference. + DMA address types dma_addr_t ---------------------------- diff --git a/lib/test_printf.c b/lib/test_printf.c index 5afdf5efc627..e3e75b6d10a0 100644 --- a/lib/test_printf.c +++ b/lib/test_printf.c @@ -432,6 +432,31 @@ struct_resource(void) "%pR", &test_resource); } +static void __init +struct_range(void) +{ + struct range test_range = { + .start = 0xc0ffee00ba5eba11, + .end = 0xc0ffee00ba5eba11, + }; + + test("[range 0xc0ffee00ba5eba11]", "%pra", &test_range); + + test_range = (struct range) { + .start = 0xc0ffee, + .end = 0xba5eba11, + }; + test("[range 0x0000000000c0ffee-0x00000000ba5eba11]", + "%pra", &test_range); + + test_range = (struct range) { + .start = 0xba5eba11, + .end = 0xc0ffee, + }; + test("[range 0x00000000ba5eba11-0x0000000000c0ffee]", + "%pra", &test_range); +} + static void __init addr(void) { @@ -807,6 +832,7 @@ test_pointer(void) symbol_ptr(); kernel_ptr(); struct_resource(); + struct_range(); addr(); escaped_str(); hex_string(); diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 09f022ba1c05..f8f5ed8f4d39 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1039,6 +1039,19 @@ static const struct printf_spec default_dec04_spec = { .flags = ZEROPAD, }; +static noinline_for_stack +char *hex_range(char *buf, char *end, u64 start_val, u64 end_val, + struct printf_spec spec) +{ + buf = number(buf, end, start_val, spec); + if (start_val != end_val) { + if (buf < end) + *buf++ = '-'; + buf = number(buf, end, end_val, spec); + } + return buf; +} + static noinline_for_stack char *resource_string(char *buf, char *end, struct resource *res, struct printf_spec spec, const char *fmt) @@ -1115,11 +1128,7 @@ char *resource_string(char *buf, char *end, struct resource *res, p = string_nocheck(p, pend, "size ", str_spec); p = number(p, pend, resource_size(res), *specp); } else { - p = number(p, pend, res->start, *specp); - if (res->start != res->end) { - *p++ = '-'; - p = number(p, pend, res->end, *specp); - } + p = hex_range(p, pend, res->start, res->end, *specp); } if (decode) { if (res->flags & IORESOURCE_MEM_64) @@ -1140,6 +1149,34 @@ char *resource_string(char *buf, char *end, struct resource *res, return string_nocheck(buf, end, sym, spec); } +static noinline_for_stack +char *range_string(char *buf, char *end, const struct range *range, + struct printf_spec spec, const char *fmt) +{ +#define RANGE_DECODED_BUF_SIZE ((2 * sizeof(struct range)) + 4) +#define RANGE_PRINT_BUF_SIZE sizeof("[range -]") + char sym[RANGE_DECODED_BUF_SIZE + RANGE_PRINT_BUF_SIZE]; + char *p = sym, *pend = sym + sizeof(sym); + + struct printf_spec range_spec = { + .field_width = 2 + 2 * sizeof(range->start), /* 0x + 2 * 8 */ + .flags = SPECIAL | SMALL | ZEROPAD, + .base = 16, + .precision = -1, + }; + + if (check_pointer(&buf, end, range, spec)) + return buf; + + *p++ = '['; + p = string_nocheck(p, pend, "range ", default_str_spec); + p = hex_range(p, pend, range->start, range->end, range_spec); + *p++ = ']'; + *p = '\0'; + + return string_nocheck(buf, end, sym, spec); +} + static noinline_for_stack char *hex_string(char *buf, char *end, u8 *addr, struct printf_spec spec, const char *fmt) @@ -2277,6 +2314,7 @@ char *rust_fmt_argument(char *buf, char *end, void *ptr); * - 'Bb' as above with module build ID (for use in backtraces) * - 'R' For decoded struct resource, e.g., [mem 0x0-0x1f 64bit pref] * - 'r' For raw struct resource, e.g., [mem 0x0-0x1f flags 0x201] + * - 'ra' struct ranges [range 0x00 - 0xff] * - 'b[l]' For a bitmap, the number of bits is determined by the field * width which must be explicitly specified either as part of the * format string '%32b[l]' or through '%*b[l]', [l] selects @@ -2399,8 +2437,13 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, fallthrough; case 'B': return symbol_string(buf, end, ptr, spec, fmt); - case 'R': case 'r': + switch (fmt[1]) { + case 'a': + return range_string(buf, end, ptr, spec, fmt); + } + fallthrough; + case 'R': return resource_string(buf, end, ptr, spec, fmt); case 'h': return hex_string(buf, end, ptr, spec, fmt);
The use of struct range in the CXL subsystem is growing. In particular, the addition of Dynamic Capacity devices uses struct range in a number of places which are reported in debug and error messages. To wit requiring the printing of the start/end fields in each print became cumbersome. Dan Williams mentions in [1] that it might be time to have a print specifier for struct range similar to struct resource A few alternatives were considered including '%par', '%r', and '%pn'. %pra follows that struct range is similar to struct resource (%p[rR]) but need to be different. Based on discussions with Petr and Andy '%pra' was chosen.[2] Andy also suggested to keep the range prints similar to struct resource though combined code. Add hex_range() to handle printing for both pointer types. To: Petr Mladek <pmladek@suse.com> To: Steven Rostedt <rostedt@goodmis.org> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com> To: Rasmus Villemoes <linux@rasmusvillemoes.dk> To: Sergey Senozhatsky <senozhatsky@chromium.org> To: Jonathan Corbet <corbet@lwn.net> (maintainer:DOCUMENTATION) Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org (open list) Link: https://lore.kernel.org/all/663922b475e50_d54d72945b@dwillia2-xfh.jf.intel.com.notmuch/ [1] Link: https://lore.kernel.org/all/66cea3bf3332f_f937b29424@iweiny-mobl.notmuch/ [2] Suggested-by: "Dan Williams" <dan.j.williams@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> --- Changes: [Andy: create new hex_range() and use it in both range/resource] [Petr/Andy: Use %pra] [Andy: Add test case start > end] [Petr: Update documentation] [Petr: use 'range -'] [Petr: fixup printf_spec specifiers] [Petr: add lib/test_printf test] --- Documentation/core-api/printk-formats.rst | 13 ++++++++ lib/test_printf.c | 26 +++++++++++++++ lib/vsprintf.c | 55 +++++++++++++++++++++++++++---- 3 files changed, 88 insertions(+), 6 deletions(-)