diff mbox series

arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant

Message ID 59c524a9a12465c21e01b779b42749fae148c41d.1728482151.git.dsimic@manjaro.org (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant | expand

Commit Message

Dragan Simic Oct. 9, 2024, 2:06 p.m. UTC
Following the hierarchical representation of the SoC data that's been already
established in the commit 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399
OPPs to dtsi files for SoC variants"), add new SoC dtsi file for the Rockchip
RK3399S SoC, which is yet another variant of the Rockchip RK3399 SoC.

The only perceivable differences between the RK3399S and the RK3399 are in
the supported CPU DVFS OPPs, which result from the RK3399S being binned for
lower maximum CPU frequencies than the regular RK3399 variant.

The RK3399S variant is used in the Pine64 PinePhone Pro only, [1] whose board
dts file included the necessary adjustments to the CPU DVFS OPPs.  This commit
effectively moves those adjustments into the separate RK3399S SoC dtsi file,
following the above-mentioned "encapsulation" approach.

The way the introduced RK3399S SoC variant dtsi file (rk3399s.dtsi) is named
diverges from the way the two already present RK3399 SoC variant dtsi files
(rk3399-op1.dtsi and rk3399-t.dtsi) are named, but that simply follows the
commonly used and/or the official RK3399 SoC variant names.

No functional changes are introduced, which was validated by decompiling and
comparing the affected dtb file before and after these changes.

[1] https://wiki.pine64.org/index.php/PinePhone_Pro

Signed-off-by: Dragan Simic <dsimic@manjaro.org>
---
 .../dts/rockchip/rk3399-pinephone-pro.dts     |  23 +---
 arch/arm64/boot/dts/rockchip/rk3399s.dtsi     | 123 ++++++++++++++++++
 2 files changed, 124 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399s.dtsi

Comments

Heiko Stuebner Oct. 10, 2024, 8:24 p.m. UTC | #1
Hi Dragan,

Am Mittwoch, 9. Oktober 2024, 16:06:00 CEST schrieb Dragan Simic:
> The way the introduced RK3399S SoC variant dtsi file (rk3399s.dtsi) is named
> diverges from the way the two already present RK3399 SoC variant dtsi files
> (rk3399-op1.dtsi and rk3399-t.dtsi) are named, but that simply follows the
> commonly used and/or the official RK3399 SoC variant names.

This is my only gripe with this ;-) .

I.e. looking through simple google, the rk3399t also seems to be written
without "-" most of the time.

Though for me it would make the most sense to just go with "rk3399-s"
here for some sort of clear style between -s -t and -op1


Heiko
Dragan Simic Oct. 11, 2024, 6:56 a.m. UTC | #2
Hello Heiko,

On 2024-10-10 22:24, Heiko Stübner wrote:
> Am Mittwoch, 9. Oktober 2024, 16:06:00 CEST schrieb Dragan Simic:
>> The way the introduced RK3399S SoC variant dtsi file (rk3399s.dtsi) is 
>> named
>> diverges from the way the two already present RK3399 SoC variant dtsi 
>> files
>> (rk3399-op1.dtsi and rk3399-t.dtsi) are named, but that simply follows 
>> the
>> commonly used and/or the official RK3399 SoC variant names.
> 
> This is my only gripe with this ;-) .
> 
> I.e. looking through simple google, the rk3399t also seems to be 
> written
> without "-" most of the time.
> 
> Though for me it would make the most sense to just go with "rk3399-s"
> here for some sort of clear style between -s -t and -op1

Believe it or not, the inconsistency of having no dash before the "s"
has bothered me too. :)  Let's add the dash, which I'll do in the v2.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 1a44582a49fb..5bc4ced81953 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -13,7 +13,7 @@ 
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
+#include "rk3399s.dtsi"
 
 / {
 	model = "Pine64 PinePhone Pro";
@@ -456,27 +456,6 @@  mpu6500@68 {
 	};
 };
 
-&cluster0_opp {
-	opp04 {
-		status = "disabled";
-	};
-
-	opp05 {
-		status = "disabled";
-	};
-};
-
-&cluster1_opp {
-	opp06 {
-		opp-hz = /bits/ 64 <1500000000>;
-		opp-microvolt = <1100000 1100000 1150000>;
-	};
-
-	opp07 {
-		status = "disabled";
-	};
-};
-
 &io_domains {
 	bt656-supply = <&vcc1v8_dvp>;
 	audio-supply = <&vcca1v8_codec>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399s.dtsi
new file mode 100644
index 000000000000..e54f451af9f3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399s.dtsi
@@ -0,0 +1,123 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3399-base.dtsi"
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000 850000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000 925000 1250000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000 950000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1100000 1100000 1150000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000 925000 1150000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000 1100000 1150000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};