| Message ID | 20241011140932.1744124-9-quic_vikramsa@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: qcom: camss: Add sc7280 support | expand |
On Fri, Oct 11, 2024 at 07:39:32PM +0530, Vikram Sharma wrote: > The Vision Mezzanine for the RB3 ships with an imx577 camera sensor. > Enable the IMX577 on the vision mezzanine. > > An example media-ctl pipeline for the imx577 is: > > media-ctl --reset > media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]' > media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' > media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]' > media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' > > yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 > > Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> > Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> > Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/qcs6490-rb3gen2-vision-mezzanine.dts | 61 +++++++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 ++++++++++ > 3 files changed, 95 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index aea1d69db541..7208da1d3697 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > new file mode 100644 > index 000000000000..04b5fe80d38d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > @@ -0,0 +1,61 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "qcs6490-rb3gen2.dts" DTS does not include DTS, but DTSI. And where is the compatible you wanted to use? This looks sketchy... mezzanines are supposed to be overlays, I think. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index aea1d69db541..7208da1d3697 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts new file mode 100644 index 000000000000..04b5fe80d38d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "qcs6490-rb3gen2.dts" + +&camcc { + status = "okay"; +}; + +&camss { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + status = "okay"; + + ports { + /* The port index denotes CSIPHY id i.e. csiphy3 */ + port@3 { + reg = <3>; + csiphy3_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c1 { + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&cam2_default>; + pinctrl-1 = <&cam2_suspend>; + + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_l18b_1p8>; + + port { + imx577_ep: endpoint { + clock-lanes = <7>; + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 9bab2d8dc1b4..74f65129e653 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5115,6 +5115,39 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + cam2_default: cam2-default-state { + rst-pins { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mclk-pins { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam2_suspend: cam2-suspend-state { + rst-pins { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + + mclk-pins { + pins = "gpio67"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + cci0_default: cci0-default-state { pins = "gpio69", "gpio70"; function = "cci_i2c";