| Message ID | 20241015-genio700-eth-v1-2-16a1c9738cf4@collabora.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Enable Ethernet on the Genio 700 EVK board | expand |
> +ð { > + phy-mode ="rgmii-rxid"; > + phy-handle = <ðernet_phy0>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <ð_default_pins>; > + pinctrl-1 = <ð_sleep_pins>; > + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>; > + snps,reset-delays-us = <0 10000 10000>; > + mediatek,tx-delay-ps = <2030>; Can you set phy-mode to rgmii-id, and remove the tx-delay-ps property? Andrew
Il 15/10/24 20:15, Nícolas F. R. A. Prado ha scritto: > Enable ethernet on the Genio 700 EVK board. It has been tested to work > with speeds up to 1000Gbps. > > Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com> > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: Hsuan-Yu Lin <shane.lin@canonical.com> > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> > Signed-off-by: fanyi zhang <fanyi.zhang@mediatek.com> > [Cleaned up to pass dtbs_check, follow DTS style guidelines, and split > between mt8188 and genio700 commits] > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> > --- > .../boot/dts/mediatek/mt8390-genio-700-evk.dts | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > index 0a6c9871b41e5f913740e68853aea78bc33d02aa..73e34e98726d36785e8b2cef73f532b6bb07c97f 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts > @@ -24,6 +24,7 @@ / { > > aliases { > serial0 = &uart0; > + ethernet0 = ð > }; > > chosen { > @@ -845,6 +846,30 @@ pins-wifi-enable { > }; > }; > > +ð { > + phy-mode ="rgmii-rxid"; > + phy-handle = <ðernet_phy0>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <ð_default_pins>; > + pinctrl-1 = <ð_sleep_pins>; > + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>; > + snps,reset-delays-us = <0 10000 10000>; > + mediatek,tx-delay-ps = <2030>; > + mediatek,mac-wol; mediatek,mac-wol; mediatek,tx-delay-ps = <2030>; snps,reset-delays-us = <0 10000 10000>; snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>; Cheers, Angelo > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethernet_phy0: ethernet-phy@1 { > + compatible = "ethernet-phy-id001c.c916"; > + reg = <0x1>; > + }; > + }; > +}; > + > &pmic { > interrupt-parent = <&pio>; > interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; >
On Tue, Oct 15, 2024 at 02:15:02PM -0400, Nícolas F. R. A. Prado wrote: > Enable ethernet on the Genio 700 EVK board. It has been tested to work > with speeds up to 1000Gbps. 1000Gbps? NVIDIA needs to watch out. Andrew
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts index 0a6c9871b41e5f913740e68853aea78bc33d02aa..73e34e98726d36785e8b2cef73f532b6bb07c97f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts @@ -24,6 +24,7 @@ / { aliases { serial0 = &uart0; + ethernet0 = ð }; chosen { @@ -845,6 +846,30 @@ pins-wifi-enable { }; }; +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ðernet_phy0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + mediatek,mac-wol; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + &pmic { interrupt-parent = <&pio>; interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;