diff mbox series

[2/2] tests/functional: Add a functional test for the sx1 board

Message ID 20241017163247.711244-3-peter.maydell@linaro.org (mailing list archive)
State New
Headers show
Series arm: Add collie and sx functional tests | expand

Commit Message

Peter Maydell Oct. 17, 2024, 4:32 p.m. UTC 
Add a functional test for the sx1 board that uses the kernel and
rootfs provided by Guenter Roeck in the linux-test-downloads repo:
 https://github.com/groeck/linux-test-downloads/

We have three variants of the test for this board:
  * just boot initrd
  * boot with filesystem on SD card
  * boot from flash

In all cases these images have a userspace that is configured to
immediately reboot the system on successful boot, and the board
itself supports telling QEMU to do the reboot, so we only need to
wait for QEMU to exit (via -no-reboot).

Since there are three subtests, the test as a whole takes about
80s on my local machine. That's about the same as the aarch64_virt
test, so give it the same overall test timeout as that one.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
The sdcard test requires the 'hw/sd/omap_mmc: Don't use sd_cmd_type_t' bugfix.
---
 tests/functional/meson.build     |  2 +
 tests/functional/test_arm_sx1.py | 72 ++++++++++++++++++++++++++++++++
 2 files changed, 74 insertions(+)
 create mode 100755 tests/functional/test_arm_sx1.py

Comments

Thomas Huth Oct. 17, 2024, 5:18 p.m. UTC | #1 
On 17/10/2024 18.32, Peter Maydell wrote:
> Add a functional test for the sx1 board that uses the kernel and
> rootfs provided by Guenter Roeck in the linux-test-downloads repo:
>   https://github.com/groeck/linux-test-downloads/
> 
> We have three variants of the test for this board:
>    * just boot initrd
>    * boot with filesystem on SD card
>    * boot from flash
> 
> In all cases these images have a userspace that is configured to
> immediately reboot the system on successful boot, and the board
> itself supports telling QEMU to do the reboot, so we only need to
> wait for QEMU to exit (via -no-reboot).
> 
> Since there are three subtests, the test as a whole takes about
> 80s on my local machine. That's about the same as the aarch64_virt
> test, so give it the same overall test timeout as that one.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> The sdcard test requires the 'hw/sd/omap_mmc: Don't use sd_cmd_type_t' bugfix.
> ---
>   tests/functional/meson.build     |  2 +
>   tests/functional/test_arm_sx1.py | 72 ++++++++++++++++++++++++++++++++
>   2 files changed, 74 insertions(+)
>   create mode 100755 tests/functional/test_arm_sx1.py
> 
> diff --git a/tests/functional/meson.build b/tests/functional/meson.build
> index 0450805a9c4..ec72bfaf63e 100644
> --- a/tests/functional/meson.build
> +++ b/tests/functional/meson.build
> @@ -16,6 +16,7 @@ test_timeouts = {
>     'aarch64_virt' : 360,
>     'acpi_bits' : 240,
>     'arm_raspi2' : 120,
> +  'arm_sx1' : 360,
>     'mips_malta' : 120,
>     'netdev_ethtool' : 180,
>     'ppc_40p' : 240,
> @@ -54,6 +55,7 @@ tests_arm_system_thorough = [
>     'arm_collie',
>     'arm_integratorcp',
>     'arm_raspi2',
> +  'arm_sx1',
>     'arm_vexpress',
>   ]
>   
> diff --git a/tests/functional/test_arm_sx1.py b/tests/functional/test_arm_sx1.py
> new file mode 100755
> index 00000000000..2d86405831e
> --- /dev/null
> +++ b/tests/functional/test_arm_sx1.py
> @@ -0,0 +1,72 @@
> +#!/usr/bin/env python3
> +#
> +# Copyright (c) 2024 Linaro Ltd.
> +#
> +# Functional test that boots a Linux kernel on an sx1 machine
> +# and checks the console. We have three variants:
> +#  * just boot initrd
> +#  * boot with filesystem on SD card
> +#  * boot from flash
> +# In all cases these images have a userspace that is configured
> +# to immediately reboot the system on successful boot, so we
> +# only need to wait for QEMU to exit (via -no-reboot).
> +#
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +from qemu_test import LinuxKernelTest, Asset
> +from qemu_test.utils import archive_extract
> +
> +class SX1Test(LinuxKernelTest):
> +
> +    ASSET_ZIMAGE = Asset(
> +        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/zImage',
> +        'a0271899a8dc2165f9e0adb2d0a57fc839ae3a469722ffc56c77e108a8887615')
> +
> +    ASSET_INITRD = Asset(
> +        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/rootfs-armv4.cpio',
> +        '35b0721249821aa544cd85b85d3cb8901db4c6d128eed86ab261e5d9e37d58f8')
> +
> +    ASSET_SD_FS = Asset(
> +        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/rootfs-armv4.ext2',
> +        'c1db7f43ef92469ebc8605013728c8950e7608439f01d13678994f0ce101c3a8')
> +
> +    ASSET_FLASH = Asset(
> +        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/flash',
> +        '17e6a2758fa38efd2666be0879d4751fd37d194f25168a8deede420df519b676')
> +
> +    CONSOLE_ARGS = 'console=ttyS0,115200 earlycon=uart8250,mmio32,0xfffb0000,115200n8'
> +
> +    def test_arm_sx1_initrd(self):
> +        self.set_machine('sx1')
> +        zimage_path = self.ASSET_ZIMAGE.fetch()
> +        initrd_path = self.ASSET_INITRD.fetch()
> +        self.vm.add_args('-append', f'kunit.enable=0 rdinit=/sbin/init {self.CONSOLE_ARGS}')
> +        self.vm.add_args('-no-reboot')
> +        self.launch_kernel(zimage_path,
> +                           initrd=initrd_path)
> +        self.vm.wait()
> +
> +    def test_arm_sx1_sd(self):
> +        self.set_machine('sx1')
> +        zimage_path = self.ASSET_ZIMAGE.fetch()
> +        sd_fs_path = self.ASSET_SD_FS.fetch()
> +        self.vm.add_args('-append', f'kunit.enable=0 root=/dev/mmcblk0 rootwait {self.CONSOLE_ARGS}')
> +        self.vm.add_args('-no-reboot')
> +        self.vm.add_args('-snapshot')
> +        self.vm.add_args('-drive', f'format=raw,if=sd,file={sd_fs_path}')
> +        self.launch_kernel(zimage_path)
> +        self.vm.wait()
> +
> +    def test_arm_sx1_flash(self):
> +        self.set_machine('sx1')
> +        zimage_path = self.ASSET_ZIMAGE.fetch()
> +        flash_path = self.ASSET_FLASH.fetch()
> +        self.vm.add_args('-append', f'kunit.enable=0 root=/dev/mtdblock3 rootwait {self.CONSOLE_ARGS}')
> +        self.vm.add_args('-no-reboot')
> +        self.vm.add_args('-snapshot')
> +        self.vm.add_args('-drive', f'format=raw,if=pflash,file={flash_path}')
> +        self.launch_kernel(zimage_path)
> +        self.vm.wait()
> +
> +if __name__ == '__main__':
> +    LinuxKernelTest.main()

Reviewed-by: Thomas Huth <thuth@redhat.com>
diff mbox series

Patch

diff --git a/tests/functional/meson.build b/tests/functional/meson.build
index 0450805a9c4..ec72bfaf63e 100644
--- a/tests/functional/meson.build
+++ b/tests/functional/meson.build
@@ -16,6 +16,7 @@  test_timeouts = {
   'aarch64_virt' : 360,
   'acpi_bits' : 240,
   'arm_raspi2' : 120,
+  'arm_sx1' : 360,
   'mips_malta' : 120,
   'netdev_ethtool' : 180,
   'ppc_40p' : 240,
@@ -54,6 +55,7 @@  tests_arm_system_thorough = [
   'arm_collie',
   'arm_integratorcp',
   'arm_raspi2',
+  'arm_sx1',
   'arm_vexpress',
 ]
 
diff --git a/tests/functional/test_arm_sx1.py b/tests/functional/test_arm_sx1.py
new file mode 100755
index 00000000000..2d86405831e
--- /dev/null
+++ b/tests/functional/test_arm_sx1.py
@@ -0,0 +1,72 @@ 
+#!/usr/bin/env python3
+#
+# Copyright (c) 2024 Linaro Ltd.
+#
+# Functional test that boots a Linux kernel on an sx1 machine
+# and checks the console. We have three variants:
+#  * just boot initrd
+#  * boot with filesystem on SD card
+#  * boot from flash
+# In all cases these images have a userspace that is configured
+# to immediately reboot the system on successful boot, so we
+# only need to wait for QEMU to exit (via -no-reboot).
+#
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+from qemu_test import LinuxKernelTest, Asset
+from qemu_test.utils import archive_extract
+
+class SX1Test(LinuxKernelTest):
+
+    ASSET_ZIMAGE = Asset(
+        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/zImage',
+        'a0271899a8dc2165f9e0adb2d0a57fc839ae3a469722ffc56c77e108a8887615')
+
+    ASSET_INITRD = Asset(
+        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/rootfs-armv4.cpio',
+        '35b0721249821aa544cd85b85d3cb8901db4c6d128eed86ab261e5d9e37d58f8')
+
+    ASSET_SD_FS = Asset(
+        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/rootfs-armv4.ext2',
+        'c1db7f43ef92469ebc8605013728c8950e7608439f01d13678994f0ce101c3a8')
+
+    ASSET_FLASH = Asset(
+        'https://github.com/groeck/linux-test-downloads/raw/225223f2ad7d637b34426810bf6c3b727b76a718/sx1/flash',
+        '17e6a2758fa38efd2666be0879d4751fd37d194f25168a8deede420df519b676')
+
+    CONSOLE_ARGS = 'console=ttyS0,115200 earlycon=uart8250,mmio32,0xfffb0000,115200n8'
+
+    def test_arm_sx1_initrd(self):
+        self.set_machine('sx1')
+        zimage_path = self.ASSET_ZIMAGE.fetch()
+        initrd_path = self.ASSET_INITRD.fetch()
+        self.vm.add_args('-append', f'kunit.enable=0 rdinit=/sbin/init {self.CONSOLE_ARGS}')
+        self.vm.add_args('-no-reboot')
+        self.launch_kernel(zimage_path,
+                           initrd=initrd_path)
+        self.vm.wait()
+
+    def test_arm_sx1_sd(self):
+        self.set_machine('sx1')
+        zimage_path = self.ASSET_ZIMAGE.fetch()
+        sd_fs_path = self.ASSET_SD_FS.fetch()
+        self.vm.add_args('-append', f'kunit.enable=0 root=/dev/mmcblk0 rootwait {self.CONSOLE_ARGS}')
+        self.vm.add_args('-no-reboot')
+        self.vm.add_args('-snapshot')
+        self.vm.add_args('-drive', f'format=raw,if=sd,file={sd_fs_path}')
+        self.launch_kernel(zimage_path)
+        self.vm.wait()
+
+    def test_arm_sx1_flash(self):
+        self.set_machine('sx1')
+        zimage_path = self.ASSET_ZIMAGE.fetch()
+        flash_path = self.ASSET_FLASH.fetch()
+        self.vm.add_args('-append', f'kunit.enable=0 root=/dev/mtdblock3 rootwait {self.CONSOLE_ARGS}')
+        self.vm.add_args('-no-reboot')
+        self.vm.add_args('-snapshot')
+        self.vm.add_args('-drive', f'format=raw,if=pflash,file={flash_path}')
+        self.launch_kernel(zimage_path)
+        self.vm.wait()
+
+if __name__ == '__main__':
+    LinuxKernelTest.main()