diff mbox series

[RFC,01/14] dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937

Message ID 20241019-msm8917-v1-1-f1f3ca1d88e5@mainlining.org (mailing list archive)
State Superseded
Headers show
Series Add MSM8917/PM8937/Redmi 5A | expand

Commit Message

Barnabás Czémán Oct. 19, 2024, 11:50 a.m. UTC
Document the 8 GPIOs found on PM8937. It has holes on
3,4 and 6 pins.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 3 +++
 1 file changed, 3 insertions(+)

Comments

Rob Herring (Arm) Oct. 19, 2024, 1:21 p.m. UTC | #1
On Sat, 19 Oct 2024 13:50:38 +0200, Barnabás Czémán wrote:
> Document the 8 GPIOs found on PM8937. It has holes on
> 3,4 and 6 pins.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241019-msm8917-v1-1-f1f3ca1d88e5@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index c1b799167d81b0b4e1edff6a6fce557fa88fd1ea..055cea5452eb62ab6e251a3a9193d1e5da293ccb 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -48,6 +48,7 @@  properties:
           - qcom,pm8916-gpio
           - qcom,pm8917-gpio
           - qcom,pm8921-gpio
+          - qcom,pm8937-gpio
           - qcom,pm8941-gpio
           - qcom,pm8950-gpio
           - qcom,pm8953-gpio
@@ -184,6 +185,7 @@  allOf:
               - qcom,pm8226-gpio
               - qcom,pm8350b-gpio
               - qcom,pm8550ve-gpio
+              - qcom,pm8937-gpio
               - qcom,pm8950-gpio
               - qcom,pm8953-gpio
               - qcom,pmi632-gpio
@@ -468,6 +470,7 @@  $defs:
                  - gpio1-gpio6 for pm8550vs
                  - gpio1-gpio38 for pm8917
                  - gpio1-gpio44 for pm8921
+                 - gpio1-gpio8 for pm8937 (hole on gpio3, gpio4 and gpio6)
                  - gpio1-gpio36 for pm8941
                  - gpio1-gpio8 for pm8950 (hole on gpio3)
                  - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)