| Message ID | 20241018171104.1624426-1-tomm.merciai@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: v4l2-subdev: Refactor events | expand |
Hi Tommaso, Thanks for working on this. On Fri, Oct 18, 2024 at 07:11:03PM +0200, Tommaso Merciai wrote: > Controls can be exposed to userspace via a v4l-subdevX device, and > userspace has to be able to subscribe to control events so that it is > notified when the control changes value. > If a control handler is set for the subdev then set the HAS_EVENTS > flag automatically into v4l2_subdev_init_finalize() and use > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > as default if subdev don't have .(un)subscribe control operations. > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > --- > drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++++++++++-- > 1 file changed, 20 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > index 3a4ba08810d2..77ca829b9983 100644 > --- a/drivers/media/v4l2-core/v4l2-subdev.c > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > @@ -691,10 +691,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, > return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); > > case VIDIOC_SUBSCRIBE_EVENT: > - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); > + if (v4l2_subdev_has_op(sd, core, subscribe_event)) > + return v4l2_subdev_call(sd, core, subscribe_event, > + vfh, arg); > + > + if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && > + vfh->ctrl_handler) > + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); > + > + return -ENOIOCTLCMD; While this mostly does the same thing, I prefer the order of tests below. Could you align event subscription with unsubscription? > > case VIDIOC_UNSUBSCRIBE_EVENT: > - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); > + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > + return -ENOIOCTLCMD; > + > + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > + return v4l2_subdev_call(sd, core, unsubscribe_event, > + vfh, arg); > + > + return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > #ifdef CONFIG_VIDEO_ADV_DEBUG > case VIDIOC_DBG_G_REGISTER: > @@ -1641,6 +1656,9 @@ int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, > } > } > > + if (sd->ctrl_handler) > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > + > state = __v4l2_subdev_state_alloc(sd, name, key); > if (IS_ERR(state)) > return PTR_ERR(state);
Hi Sakari, On Fri, Oct 18, 2024 at 07:30:30PM +0000, Sakari Ailus wrote: > Hi Tommaso, > > Thanks for working on this. In real it's a Laurent's suggestion :) > > On Fri, Oct 18, 2024 at 07:11:03PM +0200, Tommaso Merciai wrote: > > Controls can be exposed to userspace via a v4l-subdevX device, and > > userspace has to be able to subscribe to control events so that it is > > notified when the control changes value. > > If a control handler is set for the subdev then set the HAS_EVENTS > > flag automatically into v4l2_subdev_init_finalize() and use > > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > > as default if subdev don't have .(un)subscribe control operations. > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > --- > > drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++++++++++-- > > 1 file changed, 20 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > > index 3a4ba08810d2..77ca829b9983 100644 > > --- a/drivers/media/v4l2-core/v4l2-subdev.c > > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > > @@ -691,10 +691,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, > > return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); > > > > case VIDIOC_SUBSCRIBE_EVENT: > > - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); > > + if (v4l2_subdev_has_op(sd, core, subscribe_event)) > > + return v4l2_subdev_call(sd, core, subscribe_event, > > + vfh, arg); > > + > > + if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && > > + vfh->ctrl_handler) > > + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); > > + > > + return -ENOIOCTLCMD; > > While this mostly does the same thing, I prefer the order of tests below. > Could you align event subscription with unsubscription? What about: case VIDIOC_SUBSCRIBE_EVENT: if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) return -ENOIOCTLCMD; if (v4l2_subdev_has_op(sd, core, subscribe_event)) return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); if (!vfh->ctrl_handler) return -ENOTTY; return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); case VIDIOC_UNSUBSCRIBE_EVENT: if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) return -ENOIOCTLCMD; if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); return v4l2_event_subdev_unsubscribe(sd, vfh, arg); ? Thanks & Regards, Tommaso > > > > > case VIDIOC_UNSUBSCRIBE_EVENT: > > - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); > > + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > > + return -ENOIOCTLCMD; > > + > > + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > > + return v4l2_subdev_call(sd, core, unsubscribe_event, > > + vfh, arg); > > + > > + return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > > > #ifdef CONFIG_VIDEO_ADV_DEBUG > > case VIDIOC_DBG_G_REGISTER: > > @@ -1641,6 +1656,9 @@ int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, > > } > > } > > > > + if (sd->ctrl_handler) > > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > > + > > state = __v4l2_subdev_state_alloc(sd, name, key); > > if (IS_ERR(state)) > > return PTR_ERR(state); > > -- > Kind regards, > > Sakari Ailus
Hi Tommaso, On Sun, Oct 20, 2024 at 12:07:19AM +0200, Tommaso Merciai wrote: > Hi Sakari, > > On Fri, Oct 18, 2024 at 07:30:30PM +0000, Sakari Ailus wrote: > > Hi Tommaso, > > > > Thanks for working on this. > > In real it's a Laurent's suggestion :) > > > > > On Fri, Oct 18, 2024 at 07:11:03PM +0200, Tommaso Merciai wrote: > > > Controls can be exposed to userspace via a v4l-subdevX device, and > > > userspace has to be able to subscribe to control events so that it is > > > notified when the control changes value. > > > If a control handler is set for the subdev then set the HAS_EVENTS > > > flag automatically into v4l2_subdev_init_finalize() and use > > > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > > > as default if subdev don't have .(un)subscribe control operations. > > > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > > --- > > > drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++++++++++-- > > > 1 file changed, 20 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > > > index 3a4ba08810d2..77ca829b9983 100644 > > > --- a/drivers/media/v4l2-core/v4l2-subdev.c > > > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > > > @@ -691,10 +691,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, > > > return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); > > > > > > case VIDIOC_SUBSCRIBE_EVENT: > > > - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); > > > + if (v4l2_subdev_has_op(sd, core, subscribe_event)) > > > + return v4l2_subdev_call(sd, core, subscribe_event, > > > + vfh, arg); > > > + > > > + if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && > > > + vfh->ctrl_handler) > > > + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); > > > + > > > + return -ENOIOCTLCMD; > > > > While this mostly does the same thing, I prefer the order of tests below. > > Could you align event subscription with unsubscription? > > What about: > > case VIDIOC_SUBSCRIBE_EVENT: > if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > return -ENOIOCTLCMD; > > if (v4l2_subdev_has_op(sd, core, subscribe_event)) > return v4l2_subdev_call(sd, core, subscribe_event, > vfh, arg); > > if (!vfh->ctrl_handler) > return -ENOTTY; > > return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); Oh, right. Actually the earlier unsubscription didn't always produce correct results. I missed that. This is needlessly complicated at the moment. So I'd do: case VIDIOC_SUBSCRIBE_EVENT: if (v4l2_subdev_has_op(sd, core, subscribe_event)) return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); return (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && vfh->ctrl_handler ? v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg) : -ENOIOCTLCMD; case VIDIOC_UNSUBSCRIBE_EVENT: if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); return sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS ? v4l2_event_subdev_unsubscribe(sd, vfh, arg) : -ENOIOCTLCMD; > > case VIDIOC_UNSUBSCRIBE_EVENT: > if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > return -ENOIOCTLCMD; > > if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > return v4l2_subdev_call(sd, core, unsubscribe_event, > vfh, arg); > > return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > ? > > Thanks & Regards, > Tommaso > > > > > > > > > case VIDIOC_UNSUBSCRIBE_EVENT: > > > - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); > > > + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > > > + return -ENOIOCTLCMD; > > > + > > > + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > > > + return v4l2_subdev_call(sd, core, unsubscribe_event, > > > + vfh, arg); > > > + > > > + return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > > > > > #ifdef CONFIG_VIDEO_ADV_DEBUG > > > case VIDIOC_DBG_G_REGISTER: > > > @@ -1641,6 +1656,9 @@ int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, > > > } > > > } > > > > > > + if (sd->ctrl_handler) > > > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > > > + > > > state = __v4l2_subdev_state_alloc(sd, name, key); > > > if (IS_ERR(state)) > > > return PTR_ERR(state); > > > > -- > > Kind regards, > > > > Sakari Ailus
On Sun, Oct 20, 2024 at 10:45:59AM +0000, Sakari Ailus wrote: > Hi Tommaso, > > On Sun, Oct 20, 2024 at 12:07:19AM +0200, Tommaso Merciai wrote: > > Hi Sakari, > > > > On Fri, Oct 18, 2024 at 07:30:30PM +0000, Sakari Ailus wrote: > > > Hi Tommaso, > > > > > > Thanks for working on this. > > > > In real it's a Laurent's suggestion :) > > > > > > > > On Fri, Oct 18, 2024 at 07:11:03PM +0200, Tommaso Merciai wrote: > > > > Controls can be exposed to userspace via a v4l-subdevX device, and > > > > userspace has to be able to subscribe to control events so that it is > > > > notified when the control changes value. > > > > If a control handler is set for the subdev then set the HAS_EVENTS > > > > flag automatically into v4l2_subdev_init_finalize() and use > > > > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > > > > as default if subdev don't have .(un)subscribe control operations. > > > > > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > > > --- > > > > drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++++++++++-- > > > > 1 file changed, 20 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c > > > > index 3a4ba08810d2..77ca829b9983 100644 > > > > --- a/drivers/media/v4l2-core/v4l2-subdev.c > > > > +++ b/drivers/media/v4l2-core/v4l2-subdev.c > > > > @@ -691,10 +691,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, > > > > return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); > > > > > > > > case VIDIOC_SUBSCRIBE_EVENT: > > > > - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); > > > > + if (v4l2_subdev_has_op(sd, core, subscribe_event)) > > > > + return v4l2_subdev_call(sd, core, subscribe_event, > > > > + vfh, arg); > > > > + > > > > + if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && > > > > + vfh->ctrl_handler) > > > > + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); > > > > + > > > > + return -ENOIOCTLCMD; > > > > > > While this mostly does the same thing, I prefer the order of tests below. > > > Could you align event subscription with unsubscription? > > > > What about: > > > > case VIDIOC_SUBSCRIBE_EVENT: > > if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > > return -ENOIOCTLCMD; > > > > if (v4l2_subdev_has_op(sd, core, subscribe_event)) > > return v4l2_subdev_call(sd, core, subscribe_event, > > vfh, arg); > > > > if (!vfh->ctrl_handler) > > return -ENOTTY; > > > > return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); > > Oh, right. Actually the earlier unsubscription didn't always produce > correct results. I missed that. This is needlessly complicated at the > moment. So I'd do: > > case VIDIOC_SUBSCRIBE_EVENT: > if (v4l2_subdev_has_op(sd, core, subscribe_event)) > return v4l2_subdev_call(sd, core, subscribe_event, > vfh, arg); > > return (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && > vfh->ctrl_handler ? > v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg) : > -ENOIOCTLCMD; Let's make this clearer: if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && vfh->ctrl_handler) return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); return -ENOIOCTLCMD; > > case VIDIOC_UNSUBSCRIBE_EVENT: > if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > return v4l2_subdev_call(sd, core, unsubscribe_event, > vfh, arg); > > return sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS ? > v4l2_event_subdev_unsubscribe(sd, vfh, arg) : > -ENOIOCTLCMD; if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) return v4l2_event_subdev_unsubscribe(sd, vfh, arg); return -ENOIOCTLCMD; > > > > > > case VIDIOC_UNSUBSCRIBE_EVENT: > > if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > > return -ENOIOCTLCMD; > > > > if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > > return v4l2_subdev_call(sd, core, unsubscribe_event, > > vfh, arg); > > > > return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > > > ? > > > > > > > > > > case VIDIOC_UNSUBSCRIBE_EVENT: > > > > - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); > > > > + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) > > > > + return -ENOIOCTLCMD; > > > > + > > > > + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) > > > > + return v4l2_subdev_call(sd, core, unsubscribe_event, > > > > + vfh, arg); > > > > + > > > > + return v4l2_event_subdev_unsubscribe(sd, vfh, arg); > > > > > > > > #ifdef CONFIG_VIDEO_ADV_DEBUG > > > > case VIDIOC_DBG_G_REGISTER: > > > > @@ -1641,6 +1656,9 @@ int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, > > > > } > > > > } > > > > > > > > + if (sd->ctrl_handler) > > > > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > > > > + > > > > state = __v4l2_subdev_state_alloc(sd, name, key); > > > > if (IS_ERR(state)) > > > > return PTR_ERR(state);
diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index 3a4ba08810d2..77ca829b9983 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -691,10 +691,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); case VIDIOC_SUBSCRIBE_EVENT: - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); + if (v4l2_subdev_has_op(sd, core, subscribe_event)) + return v4l2_subdev_call(sd, core, subscribe_event, + vfh, arg); + + if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && + vfh->ctrl_handler) + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); + + return -ENOIOCTLCMD; case VIDIOC_UNSUBSCRIBE_EVENT: - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) + return -ENOIOCTLCMD; + + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) + return v4l2_subdev_call(sd, core, unsubscribe_event, + vfh, arg); + + return v4l2_event_subdev_unsubscribe(sd, vfh, arg); #ifdef CONFIG_VIDEO_ADV_DEBUG case VIDIOC_DBG_G_REGISTER: @@ -1641,6 +1656,9 @@ int __v4l2_subdev_init_finalize(struct v4l2_subdev *sd, const char *name, } } + if (sd->ctrl_handler) + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; + state = __v4l2_subdev_state_alloc(sd, name, key); if (IS_ERR(state)) return PTR_ERR(state);
Controls can be exposed to userspace via a v4l-subdevX device, and userspace has to be able to subscribe to control events so that it is notified when the control changes value. If a control handler is set for the subdev then set the HAS_EVENTS flag automatically into v4l2_subdev_init_finalize() and use v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() as default if subdev don't have .(un)subscribe control operations. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> --- drivers/media/v4l2-core/v4l2-subdev.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)