| Message ID | 20241022-8250-omap-no-console-suspend-v2-1-cc3d102b8a1e@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains | expand |
On Tue, 22 Oct 2024 at 10:23, Thomas Richard <thomas.richard@bootlin.com> wrote: > > With this flag, if a device is marked on the wakeup path, the corresponding > PM domain is kept powered on. > > This commit fixes the no_console_suspend support for some TI platforms > (tested on J7200). In case of no_console_suspend the serial core marks the > device on the wakeup path, but without this patch the power domain is > powered off anyway. > > Suggested-by: Théo Lebrun <theo.lebrun@bootlin.com> > Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Applied for next, thanks! Kind regards Uffe > --- > This is the second version of the series to fix no_console_suspend in the > 8250_omap driver. > For this second version, the patch 2/2 "serial: 8250_omap: mark the serial > as on the wakeup path if no_console_suspend" was removed. No need to mark > the serial as on the wakeup path from the driver, as it is already done by > the serial core [1]. > > Regards, > > Thomas > > [1] https://elixir.bootlin.com/linux/v6.12-rc3/source/drivers/tty/serial/serial_core.c#L2407 > --- > Changes in v2: > - remove patch 2/2 "serial: 8250_omap: mark the serial as on the wakeup > path if no_console_suspend" > - Link to v1: https://lore.kernel.org/r/20241008-8250-omap-no-console-suspend-v1-0-e7f0365c02f0@bootlin.com > --- > drivers/pmdomain/ti/ti_sci_pm_domains.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/pmdomain/ti/ti_sci_pm_domains.c b/drivers/pmdomain/ti/ti_sci_pm_domains.c > index 1510d5ddae3d..38448b4a035a 100644 > --- a/drivers/pmdomain/ti/ti_sci_pm_domains.c > +++ b/drivers/pmdomain/ti/ti_sci_pm_domains.c > @@ -186,6 +186,7 @@ static int ti_sci_pm_domain_probe(struct platform_device *pdev) > > pd->pd.power_off = ti_sci_pd_power_off; > pd->pd.power_on = ti_sci_pd_power_on; > + pd->pd.flags |= GENPD_FLAG_ACTIVE_WAKEUP; > pd->idx = args.args[0]; > pd->parent = pd_provider; > > > --- > base-commit: eec50dadcc91583e08dcabdf83147f6538831b5f > change-id: 20240819-8250-omap-no-console-suspend-1073308d3714 > > Best regards, > -- > Thomas Richard <thomas.richard@bootlin.com> >
Thomas Richard <thomas.richard@bootlin.com> writes: > With this flag, if a device is marked on the wakeup path, the corresponding > PM domain is kept powered on. > > This commit fixes the no_console_suspend support for some TI platforms > (tested on J7200). In case of no_console_suspend the serial core marks the > device on the wakeup path, but without this patch the power domain is > powered off anyway. > > Suggested-by: Théo Lebrun <theo.lebrun@bootlin.com> > Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
diff --git a/drivers/pmdomain/ti/ti_sci_pm_domains.c b/drivers/pmdomain/ti/ti_sci_pm_domains.c index 1510d5ddae3d..38448b4a035a 100644 --- a/drivers/pmdomain/ti/ti_sci_pm_domains.c +++ b/drivers/pmdomain/ti/ti_sci_pm_domains.c @@ -186,6 +186,7 @@ static int ti_sci_pm_domain_probe(struct platform_device *pdev) pd->pd.power_off = ti_sci_pd_power_off; pd->pd.power_on = ti_sci_pd_power_on; + pd->pd.flags |= GENPD_FLAG_ACTIVE_WAKEUP; pd->idx = args.args[0]; pd->parent = pd_provider;
With this flag, if a device is marked on the wakeup path, the corresponding PM domain is kept powered on. This commit fixes the no_console_suspend support for some TI platforms (tested on J7200). In case of no_console_suspend the serial core marks the device on the wakeup path, but without this patch the power domain is powered off anyway. Suggested-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> --- This is the second version of the series to fix no_console_suspend in the 8250_omap driver. For this second version, the patch 2/2 "serial: 8250_omap: mark the serial as on the wakeup path if no_console_suspend" was removed. No need to mark the serial as on the wakeup path from the driver, as it is already done by the serial core [1]. Regards, Thomas [1] https://elixir.bootlin.com/linux/v6.12-rc3/source/drivers/tty/serial/serial_core.c#L2407 --- Changes in v2: - remove patch 2/2 "serial: 8250_omap: mark the serial as on the wakeup path if no_console_suspend" - Link to v1: https://lore.kernel.org/r/20241008-8250-omap-no-console-suspend-v1-0-e7f0365c02f0@bootlin.com --- drivers/pmdomain/ti/ti_sci_pm_domains.c | 1 + 1 file changed, 1 insertion(+) --- base-commit: eec50dadcc91583e08dcabdf83147f6538831b5f change-id: 20240819-8250-omap-no-console-suspend-1073308d3714 Best regards,