Message ID | 20241023091213.593351-1-m-malladi@ti.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [net] net: ti: iccsg-prueth: Fix 1 PPS sync | expand |
On 23/10/2024 10:12, Meghana Malladi wrote: > The first PPS latch time needs to be calculated by the driver > (in rounded off seconds) and configured as the start time > offset for the cycle. After synchronizing two PTP clocks > running as master/slave, missing this would cause master > and slave to start immediately with some milliseconds > drift which causes the PPS signal to never synchronize with > the PTP master. > > Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") > Signed-off-by: Meghana Malladi <m-malladi@ti.com> > --- > drivers/net/ethernet/ti/icssg/icssg_prueth.c | 12 ++++++++++-- > drivers/net/ethernet/ti/icssg/icssg_prueth.h | 11 +++++++++++ > 2 files changed, 21 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c > index 0556910938fa..6b2cd7c898d0 100644 > --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c > +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c > @@ -411,6 +411,8 @@ static int prueth_perout_enable(void *clockops_data, > struct prueth_emac *emac = clockops_data; > u32 reduction_factor = 0, offset = 0; > struct timespec64 ts; > + u64 current_cycle; > + u64 start_offset; > u64 ns_period; > > if (!on) > @@ -449,8 +451,14 @@ static int prueth_perout_enable(void *clockops_data, > writel(reduction_factor, emac->prueth->shram.va + > TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET); > > - writel(0, emac->prueth->shram.va + > - TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); > + current_cycle = icssg_readq(emac->prueth->shram.va + > + TIMESYNC_FW_WC_CYCLECOUNT_OFFSET); > + > + /* Rounding of current_cycle count to next second */ > + start_offset = ((current_cycle / MSEC_PER_SEC) + 1) * MSEC_PER_SEC; This looks more like roundup(current_cycle, MSEC_PER_SEC), let's use it instead of open coding. > + > + icssg_writeq(start_offset, emac->prueth->shram.va + > + TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); > > return 0; > } > diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h > index 8722bb4a268a..a4af2dbcca31 100644 > --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h > +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h > @@ -330,6 +330,17 @@ static inline int prueth_emac_slice(struct prueth_emac *emac) > extern const struct ethtool_ops icssg_ethtool_ops; > extern const struct dev_pm_ops prueth_dev_pm_ops; > > +static inline u64 icssg_readq(const void __iomem *addr) > +{ > + return readl(addr) + ((u64)readl(addr + 4) << 32); > +} > + > +static inline void icssg_writeq(u64 val, void __iomem *addr) > +{ > + writel(lower_32_bits(val), addr); > + writel(upper_32_bits(val), addr + 4); > +} > + > /* Classifier helpers */ > void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac); > void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac); > > base-commit: 73840ca5ef361f143b89edd5368a1aa8c2979241
On 23/10/24 15:52, Vadim Fedorenko wrote: > On 23/10/2024 10:12, Meghana Malladi wrote: >> The first PPS latch time needs to be calculated by the driver >> (in rounded off seconds) and configured as the start time >> offset for the cycle. After synchronizing two PTP clocks >> running as master/slave, missing this would cause master >> and slave to start immediately with some milliseconds >> drift which causes the PPS signal to never synchronize with >> the PTP master. >> >> Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") >> Signed-off-by: Meghana Malladi <m-malladi@ti.com> >> --- >> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 12 ++++++++++-- >> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 11 +++++++++++ >> 2 files changed, 21 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c >> index 0556910938fa..6b2cd7c898d0 100644 >> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c >> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c >> @@ -411,6 +411,8 @@ static int prueth_perout_enable(void *clockops_data, >> struct prueth_emac *emac = clockops_data; >> u32 reduction_factor = 0, offset = 0; >> struct timespec64 ts; >> + u64 current_cycle; >> + u64 start_offset; >> u64 ns_period; >> >> if (!on) >> @@ -449,8 +451,14 @@ static int prueth_perout_enable(void *clockops_data, >> writel(reduction_factor, emac->prueth->shram.va + >> TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET); >> >> - writel(0, emac->prueth->shram.va + >> - TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); >> + current_cycle = icssg_readq(emac->prueth->shram.va + >> + TIMESYNC_FW_WC_CYCLECOUNT_OFFSET); >> + >> + /* Rounding of current_cycle count to next second */ >> + start_offset = ((current_cycle / MSEC_PER_SEC) + 1) * MSEC_PER_SEC; > > This looks more like roundup(current_cycle, MSEC_PER_SEC), let's use it > instead of open coding. > Ok sure, I will update it. >> + >> + icssg_writeq(start_offset, emac->prueth->shram.va + >> + TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); >> >> return 0; >> } >> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h >> index 8722bb4a268a..a4af2dbcca31 100644 >> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h >> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h >> @@ -330,6 +330,17 @@ static inline int prueth_emac_slice(struct prueth_emac *emac) >> extern const struct ethtool_ops icssg_ethtool_ops; >> extern const struct dev_pm_ops prueth_dev_pm_ops; >> >> +static inline u64 icssg_readq(const void __iomem *addr) >> +{ >> + return readl(addr) + ((u64)readl(addr + 4) << 32); >> +} >> + >> +static inline void icssg_writeq(u64 val, void __iomem *addr) >> +{ >> + writel(lower_32_bits(val), addr); >> + writel(upper_32_bits(val), addr + 4); >> +} >> + >> /* Classifier helpers */ >> void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac); >> void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac); >> >> base-commit: 73840ca5ef361f143b89edd5368a1aa8c2979241 >
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 0556910938fa..6b2cd7c898d0 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -411,6 +411,8 @@ static int prueth_perout_enable(void *clockops_data, struct prueth_emac *emac = clockops_data; u32 reduction_factor = 0, offset = 0; struct timespec64 ts; + u64 current_cycle; + u64 start_offset; u64 ns_period; if (!on) @@ -449,8 +451,14 @@ static int prueth_perout_enable(void *clockops_data, writel(reduction_factor, emac->prueth->shram.va + TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET); - writel(0, emac->prueth->shram.va + - TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); + current_cycle = icssg_readq(emac->prueth->shram.va + + TIMESYNC_FW_WC_CYCLECOUNT_OFFSET); + + /* Rounding of current_cycle count to next second */ + start_offset = ((current_cycle / MSEC_PER_SEC) + 1) * MSEC_PER_SEC; + + icssg_writeq(start_offset, emac->prueth->shram.va + + TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET); return 0; } diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h index 8722bb4a268a..a4af2dbcca31 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h @@ -330,6 +330,17 @@ static inline int prueth_emac_slice(struct prueth_emac *emac) extern const struct ethtool_ops icssg_ethtool_ops; extern const struct dev_pm_ops prueth_dev_pm_ops; +static inline u64 icssg_readq(const void __iomem *addr) +{ + return readl(addr) + ((u64)readl(addr + 4) << 32); +} + +static inline void icssg_writeq(u64 val, void __iomem *addr) +{ + writel(lower_32_bits(val), addr); + writel(upper_32_bits(val), addr + 4); +} + /* Classifier helpers */ void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac); void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac);
The first PPS latch time needs to be calculated by the driver (in rounded off seconds) and configured as the start time offset for the cycle. After synchronizing two PTP clocks running as master/slave, missing this would cause master and slave to start immediately with some milliseconds drift which causes the PPS signal to never synchronize with the PTP master. Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> --- drivers/net/ethernet/ti/icssg/icssg_prueth.c | 12 ++++++++++-- drivers/net/ethernet/ti/icssg/icssg_prueth.h | 11 +++++++++++ 2 files changed, 21 insertions(+), 2 deletions(-) base-commit: 73840ca5ef361f143b89edd5368a1aa8c2979241