| Message ID | 20241003030919.17980-4-macpaul.lin@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/4] dt-bindings: iommu: mediatek: Fix interrupt count constraint for new SoCs | expand |
Hi, Macpaul: Macpaul Lin <macpaul.lin@mediatek.com> 於 2024年10月3日 週四 上午11:09寫道： > > The MediaTek DPI module is typically associated with one of the > following multimedia power domains: > - POWER_DOMAIN_DISPLAY > - POWER_DOMAIN_VDOSYS > - POWER_DOMAIN_MM > The specific power domain used varies depending on the SoC design. > > These power domains are shared by multiple devices within the SoC. > In most cases, these power domains are enabled by other devices. > As a result, the DPI module of legacy SoCs often functions correctly > even without explicit configuration. > > It is recommended to explicitly add the appropriate power domain > property to the DPI node in the device tree. Hence drop the > compatible checking for specific SoCs. Applied to mediatek-drm-fixes [1], thanks. [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-fixes Regards, Chun-Kuang. > > Fixes: 5474d49b2f79 ("dt-bindings: display: mediatek: dpi: Add power domains") > Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > .../display/mediatek/mediatek,dpi.yaml | 24 ++++++++----------- > 1 file changed, 10 insertions(+), 14 deletions(-) > > Changes for v2: > - Because of the corresponding dts fix has been reviewed with a Reviewed-by: tag. > [1] https://lore.kernel.org/all/20240925080515.16377-1-macpaul.lin@mediatek.com/ > We still need this change to fix the 2 dtbs_check errors. > So keeps no change here. > > Changes for v3: > - The origin patch is [2] > https://lore.kernel.org/all/20240926111449.9245-2-macpaul.lin@mediatek.com/ > - Thanks for Conor's reminding, after MediaTek's internal discussion, > This patch v3 is the replacement of [2] v2. > Because the DPI module should has a explicit configuration with power domain. > - Drop Acked-by: tag since v3 is nearly a new patch for different approach. > > Changes for v4: > - No change. Please help to review it again. > > Changes for v5: > - Add missing Reviewed-by Tag from Krzysztof. Thanks. > > Changes for v6: > - No change. > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > index 3a82aec9021c..497c0eb4ed0b 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml > @@ -63,6 +63,16 @@ properties: > - const: sleep > > power-domains: > + description: | > + The MediaTek DPI module is typically associated with one of the > + following multimedia power domains: > + POWER_DOMAIN_DISPLAY > + POWER_DOMAIN_VDOSYS > + POWER_DOMAIN_MM > + The specific power domain used varies depending on the SoC design. > + > + It is recommended to explicitly add the appropriate power domain > + property to the DPI node in the device tree. > maxItems: 1 > > port: > @@ -79,20 +89,6 @@ required: > - clock-names > - port > > -allOf: > - - if: > - not: > - properties: > - compatible: > - contains: > - enum: > - - mediatek,mt6795-dpi > - - mediatek,mt8173-dpi > - - mediatek,mt8186-dpi > - then: > - properties: > - power-domains: false > - > additionalProperties: false > > examples: > -- > 2.45.2 >
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 3a82aec9021c..497c0eb4ed0b 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -63,6 +63,16 @@ properties: - const: sleep power-domains: + description: | + The MediaTek DPI module is typically associated with one of the + following multimedia power domains: + POWER_DOMAIN_DISPLAY + POWER_DOMAIN_VDOSYS + POWER_DOMAIN_MM + The specific power domain used varies depending on the SoC design. + + It is recommended to explicitly add the appropriate power domain + property to the DPI node in the device tree. maxItems: 1 port: @@ -79,20 +89,6 @@ required: - clock-names - port -allOf: - - if: - not: - properties: - compatible: - contains: - enum: - - mediatek,mt6795-dpi - - mediatek,mt8173-dpi - - mediatek,mt8186-dpi - then: - properties: - power-domains: false - additionalProperties: false examples:
The MediaTek DPI module is typically associated with one of the following multimedia power domains: - POWER_DOMAIN_DISPLAY - POWER_DOMAIN_VDOSYS - POWER_DOMAIN_MM The specific power domain used varies depending on the SoC design. These power domains are shared by multiple devices within the SoC. In most cases, these power domains are enabled by other devices. As a result, the DPI module of legacy SoCs often functions correctly even without explicit configuration. It is recommended to explicitly add the appropriate power domain property to the DPI node in the device tree. Hence drop the compatible checking for specific SoCs. Fixes: 5474d49b2f79 ("dt-bindings: display: mediatek: dpi: Add power domains") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../display/mediatek/mediatek,dpi.yaml | 24 ++++++++----------- 1 file changed, 10 insertions(+), 14 deletions(-) Changes for v2: - Because of the corresponding dts fix has been reviewed with a Reviewed-by: tag. [1] https://lore.kernel.org/all/20240925080515.16377-1-macpaul.lin@mediatek.com/ We still need this change to fix the 2 dtbs_check errors. So keeps no change here. Changes for v3: - The origin patch is [2] https://lore.kernel.org/all/20240926111449.9245-2-macpaul.lin@mediatek.com/ - Thanks for Conor's reminding, after MediaTek's internal discussion, This patch v3 is the replacement of [2] v2. Because the DPI module should has a explicit configuration with power domain. - Drop Acked-by: tag since v3 is nearly a new patch for different approach. Changes for v4: - No change. Please help to review it again. Changes for v5: - Add missing Reviewed-by Tag from Krzysztof. Thanks. Changes for v6: - No change.