| Message ID | 20241022-raspberrypi-bcm2835-power-v2-1-1a4a8a8a5737@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] dt-bindings: soc: bcm: Convert raspberrypi,bcm2835-power to Dt schema | expand |
On Tue, Oct 22, 2024 at 06:17:03PM +0000, Karan Sanghavi wrote: > Convert the raspberrypi,bcm2835-power binding to Dt schema > > Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> > --- > Changes in v2: > - Added original file maintainers > - Removed unnecessary headers from example and formating from description > - Link to v1: https://lore.kernel.org/r/20241019-raspberrypi-bcm2835-power-v1-1-75e924dc3745@gmail.com > --- > @@ -0,0 +1,42 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/bcm/raspberrypi,bcm2835-power.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Broadcom BCM2835 power domain driver Drop "driver" > + > +maintainers: > + - Alexander Aring <alex.aring@gmail.com> > + - Eric Anholt <eric@anholt.net> > + > +description: > + The Raspberry Pi power domain driver manages power for various subsystems Drop "driver" > + in the Raspberry Pi BCM2835 SoC. > + > +properties: > + compatible: > + enum: > + - raspberrypi,bcm2835-power > + > + firmware: > + $ref: /schemas/types.yaml#/definitions/phandle phandle to what? Missing description. > + > + '#power-domain-cells': Use consistent quotes, either ' or ". > + const: 1 > + > +required: > + - compatible > + - firmware > + - "#power-domain-cells" > + > +unevaluatedProperties: false > + > +examples: > + - | > + power: power { Drop label. Node name: power-controller I don't think this passes tests because of this. See power-domain.yaml schema. Best regards, Krzysztof
On 23/10/2024 09:12, Krzysztof Kozlowski wrote: > On Tue, Oct 22, 2024 at 06:17:03PM +0000, Karan Sanghavi wrote: >> Convert the raspberrypi,bcm2835-power binding to Dt schema >> >> Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> >> --- >> Changes in v2: >> - Added original file maintainers >> - Removed unnecessary headers from example and formating from description >> - Link to v1: https://lore.kernel.org/r/20241019-raspberrypi-bcm2835-power-v1-1-75e924dc3745@gmail.com >> --- > >> @@ -0,0 +1,42 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/soc/bcm/raspberrypi,bcm2835-power.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# Ah, and this is of course not part of soc directory, but power, so move it there. Best regards, Krzysztof
On Wed, Oct 23, 2024 at 09:12:53AM +0200, Krzysztof Kozlowski wrote: > On Tue, Oct 22, 2024 at 06:17:03PM +0000, Karan Sanghavi wrote: > > Convert the raspberrypi,bcm2835-power binding to Dt schema > > > > Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> > > --- > > Changes in v2: > > - Added original file maintainers > > - Removed unnecessary headers from example and formating from description > > - Link to v1: https://lore.kernel.org/r/20241019-raspberrypi-bcm2835-power-v1-1-75e924dc3745@gmail.com > > --- > > > @@ -0,0 +1,42 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/soc/bcm/raspberrypi,bcm2835-power.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Broadcom BCM2835 power domain driver > > Drop "driver" > > > + > > +maintainers: > > + - Alexander Aring <alex.aring@gmail.com> > > + - Eric Anholt <eric@anholt.net> > > + > > +description: > > + The Raspberry Pi power domain driver manages power for various subsystems > > Drop "driver" > > > + in the Raspberry Pi BCM2835 SoC. > > + > > +properties: > > + compatible: > > + enum: > > + - raspberrypi,bcm2835-power > > + > > + firmware: > > + $ref: /schemas/types.yaml#/definitions/phandle > > phandle to what? Missing description. > > > + > > + '#power-domain-cells': > > Use consistent quotes, either ' or ". > > > + const: 1 > > + > > +required: > > + - compatible > > + - firmware > > + - "#power-domain-cells" > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + power: power { > > Drop label. Node name: power-controller > > I don't think this passes tests because of this. See power-domain.yaml > schema. > Below code is from bcm2711-rpi-4-b.dts decompiled from the dtb file. firmware { compatible = "raspberrypi,bcm2835-firmware\0simple-mfd"; mboxes = <0x1d>; phandle = <0x1e>; ... }; power { compatible = "raspberrypi,bcm2835-power"; firmware = <0x1e>; #power-domain-cells = <0x01>; phandle = <0x0b>; }; I had a doubt that as above the raspberrypi,bcm2835-power compatible node is defined with power keyword, so should I still rename the node as power-controll or keep it has power? Also it does passes the dt_binding_check and CHECK_DTBS=y broadcom/bcm2711-rpi-4-b.dtb but does gives the message as soc: power: 'ranges' is a required property so do I need to add the range property here? > Best regards, > Krzysztof >
On 25/10/2024 20:22, Karan Sanghavi wrote: >>> + >>> +examples: >>> + - | >>> + power: power { >> >> Drop label. Node name: power-controller >> >> I don't think this passes tests because of this. See power-domain.yaml >> schema. >> > > Below code is from bcm2711-rpi-4-b.dts decompiled from the dtb file. Uh? Why would we ever care about decompiling some DTBs? > > firmware { > compatible = "raspberrypi,bcm2835-firmware\0simple-mfd"; > mboxes = <0x1d>; > phandle = <0x1e>; > ... > }; > > power { > compatible = "raspberrypi,bcm2835-power"; > firmware = <0x1e>; > #power-domain-cells = <0x01>; > phandle = <0x0b>; > }; > > I had a doubt that as above the raspberrypi,bcm2835-power compatible node > is defined with power keyword, so should I still rename the node as > power-controll or keep it has power? I don't understand your arguments. Schema expects this to have proper name (see bindings). DT spec as well. > > Also it does passes the dt_binding_check and CHECK_DTBS=y broadcom/bcm2711-rpi-4-b.dtb > but does gives the message as > soc: power: 'ranges' is a required property > so do I need to add the range property here? I have no clue what you are testing here. We do not care about some out of tree DTB. And if you ask about upstream, then take conversions tasks after reading this: https://social.kernel.org/notice/Ai9hYRUKo8suzX3zNY BTW, your patch has patch errors which *have to be fixed* as well. Apply your patch to see them. Run checkpatch. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt deleted file mode 100644 index 30942cf7992b..000000000000 --- a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt +++ /dev/null @@ -1,47 +0,0 @@ -Raspberry Pi power domain driver - -Required properties: - -- compatible: Should be "raspberrypi,bcm2835-power". -- firmware: Reference to the RPi firmware device node. -- #power-domain-cells: Should be <1>, we providing multiple power domains. - -The valid defines for power domain are: - - RPI_POWER_DOMAIN_I2C0 - RPI_POWER_DOMAIN_I2C1 - RPI_POWER_DOMAIN_I2C2 - RPI_POWER_DOMAIN_VIDEO_SCALER - RPI_POWER_DOMAIN_VPU1 - RPI_POWER_DOMAIN_HDMI - RPI_POWER_DOMAIN_USB - RPI_POWER_DOMAIN_VEC - RPI_POWER_DOMAIN_JPEG - RPI_POWER_DOMAIN_H264 - RPI_POWER_DOMAIN_V3D - RPI_POWER_DOMAIN_ISP - RPI_POWER_DOMAIN_UNICAM0 - RPI_POWER_DOMAIN_UNICAM1 - RPI_POWER_DOMAIN_CCP2RX - RPI_POWER_DOMAIN_CSI2 - RPI_POWER_DOMAIN_CPI - RPI_POWER_DOMAIN_DSI0 - RPI_POWER_DOMAIN_DSI1 - RPI_POWER_DOMAIN_TRANSPOSER - RPI_POWER_DOMAIN_CCP2TX - RPI_POWER_DOMAIN_CDP - RPI_POWER_DOMAIN_ARM - -Example: - -power: power { - compatible = "raspberrypi,bcm2835-power"; - firmware = <&firmware>; - #power-domain-cells = <1>; -}; - -Example for using power domain: - -&usb { - power-domains = <&power RPI_POWER_DOMAIN_USB>; -}; diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.yaml b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.yaml new file mode 100644 index 000000000000..bc4223428bac --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/raspberrypi,bcm2835-power.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2835 power domain driver + +maintainers: + - Alexander Aring <alex.aring@gmail.com> + - Eric Anholt <eric@anholt.net> + +description: + The Raspberry Pi power domain driver manages power for various subsystems + in the Raspberry Pi BCM2835 SoC. + +properties: + compatible: + enum: + - raspberrypi,bcm2835-power + + firmware: + $ref: /schemas/types.yaml#/definitions/phandle + + '#power-domain-cells': + const: 1 + +required: + - compatible + - firmware + - "#power-domain-cells" + +unevaluatedProperties: false + +examples: + - | + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; +
Convert the raspberrypi,bcm2835-power binding to Dt schema Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> --- Changes in v2: - Added original file maintainers - Removed unnecessary headers from example and formating from description - Link to v1: https://lore.kernel.org/r/20241019-raspberrypi-bcm2835-power-v1-1-75e924dc3745@gmail.com --- .../bindings/soc/bcm/raspberrypi,bcm2835-power.txt | 47 ---------------------- .../soc/bcm/raspberrypi,bcm2835-power.yaml | 42 +++++++++++++++++++ 2 files changed, 42 insertions(+), 47 deletions(-) --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241019-raspberrypi-bcm2835-power-5a4231be8959 Best regards,