Message ID | 20241022084040.3390878-5-ming.qian@nxp.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Add video encoder ROI ctrls | expand |
On 22/10/2024 10:40, Ming Qian wrote: > Add some ctrls to support the video encoder region-of-interest(ROI) > feature. The ROI QP Map and rectangular configuration are supported. > > Signed-off-by: Ming Qian <ming.qian@nxp.com> > Signed-off-by: TaoJiang <tao.jiang_2@nxp.com> > --- > .../media/v4l/ext-ctrls-codec.rst | 95 +++++++++++++++++++ > drivers/media/v4l2-core/v4l2-ctrls-defs.c | 46 +++++++++ > include/uapi/linux/v4l2-controls.h | 16 ++++ > 3 files changed, 157 insertions(+) > > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > index 4a379bd9e3fb..7188d8212677 100644 > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst > @@ -1667,6 +1667,101 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - > Codecs need to always use the specified range, rather then a HW custom range. > Applicable to encoders > > +``V4L2_CID_MPEG_VIDEO_ROI_MODE`` > + (enum) > + > +enum v4l2_mpeg_video_roi_mode - > + Indicates Video Encoding region-of-interest (ROI) Mode. > + Possible values are: > + > + > +.. flat-table:: > + :header-rows: 0 > + :stub-columns: 0 > + > + * - ``V4L2_MPEG_VIDEO_ROI_MODE_NONE`` > + - No ROI in the MPEG stream > + * - ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP`` > + - Rectangle ROI mode and specifies ROI delta QP. > + * - ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY`` > + - Rectangle ROI mode and specifies ROI priority. > + * - ``V4L2_MPEG_VIDEO_ROI_MODE_MAP_DELTA_QP`` > + - Map ROI mode and specifies ROI delta QP > + * - ``V4L2_MPEG_VIDEO_ROI_MODE_MAP_ABSOLUTE_QP`` > + - Map ROI mode and specifies ROI absolute QP value You need to extend these descriptions, it is really vague. Also point to the controls that are involved: e.g. for _RECT_DELTA_QP you need to provide V4L2_CID_MPEG_VIDEO_ROI_RECT + V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP. > + > +``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE (struct)`` > + This control returns the ROI block size in pixels. The struct > + :c:type:`v4l2_area` provides the width and height in separate > + fields. The resolution of the frame will be rounded up to be > + aligned to this value when it's partitioned in blocks for QP > + maps and the number of QP values in those maps will be the > + number of blocks of these indicated pixel size that comprise > + a full frame. This control depends on the encoding format, > + and the detailed encoder hardware. > + Applicable to encoders. You should mention that this is a read-only control. > + > +``V4L2_CID_MPEG_VIDEO_ROI_RECT (struct)`` > + A struct :c:type:`v4l2_rect` provides the rectangular region > + described by the position of its top-left corner, the width > + and the height. The unit is in pixels. And it should be aligned > + to the ROI block size, which can be queried from > + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. X,Y gets rounded down, > + and width/height up. The maximum number of rectangular regions So this rounding down/up happens if the rectangle is NOT aligned to the ROI block size, right? It is probably good to mention this: "If it is not aligned to the ROI block size, then X, Y gets..." > + depends on the hardware. This control is a dynamically sized array. > + This control is applicable when ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` > + value is ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP`` or > + ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY``. For overlapping > + regions, the value that is first in the ROI array will have priority. > + Applicable to encoders. > + > +``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP (integer)`` > + Specifies the ROI delta QP of a rectangular region. The delta QP > + is the value that will be added on top of the frame level QP. > + It can be positive (more distortion) or negative (less distortion) > + values. This control is applicable when > + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is > + ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP``, and need to be used need to -> must > + in combination with ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. > + This control is a dynamically sized array, and the array size > + should match ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. What happens if it does not match the V4L2_CID_MPEG_VIDEO_ROI_RECT array size? > + Applicable to encoders. > + > +``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY (integer)`` > + Specifies the ROI priority of a rectangular region. it can > + be positive (more important) or negative (less important) > + values and is compared with non-ROI region (taken as value 0). > + This control is applicable when ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` > + value is ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY``, and need need to -> must > + to be used in combination with ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. Add: This control is a dynamically sized array, and the array size should match ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. > + Applicable to encoders. > + > +``V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP (integer)`` > + This is to configure ROI as a map as an integer array, "configure ROI as a map as an integer array": not a very clear description. I had to read this control description several times before I understood what it does. > + each value represents the delta QP of a block region > + in raster scan order. The block size can be got from > + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. This control is a > + dynamically sized array, the array size can be calculated > + from video resolution and the ROI block size, and the > + width and height should be rounded up to be aligned to What happens if the array size is too small? > + the block size. This control is applicable when > + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is > + ``V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP``. > + Applicable to encoders. > + > +``V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP (integer)`` > + This is to configure ROI as a map as an integer array, > + each value represents the absolute QP of a block region > + in raster scan order. The block size can be got from > + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. This control is a > + dynamically sized array, the array size can be calculated > + from video resolution and the ROI block size, and the > + width and height should be rounded up to be aligned to > + the block size. This control is applicable when > + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is > + ``V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP``. > + Applicable to encoders. > + > .. raw:: latex > > \normalsize > diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c > index 1ea52011247a..4d89309bf8d0 100644 > --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c > +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c > @@ -612,6 +612,15 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > NULL, > }; > > + static const char * const mpeg_video_roi_mode[] = { > + "None", > + "Rectangle Delta QP", > + "Rectangle Priority", > + "Map Delta QP", > + "Map Absolute QP", > + NULL, > + }; > + > switch (id) { > case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: > return mpeg_audio_sampling_freq; > @@ -750,6 +759,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) > return camera_orientation; > case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE: > return intra_refresh_period_type; > + case V4L2_CID_MPEG_VIDEO_ROI_MODE: > + return mpeg_video_roi_mode; > default: > return NULL; > } > @@ -971,6 +982,13 @@ const char *v4l2_ctrl_get_name(u32 id) > case V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX: return "Frame LTR Index"; > case V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES: return "Use LTR Frames"; > case V4L2_CID_MPEG_VIDEO_AVERAGE_QP: return "Average QP Value"; > + case V4L2_CID_MPEG_VIDEO_ROI_MODE: return "Video ROI Mode"; > + case V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE: return "Video ROI Block Size"; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT: return "Video ROI Rectangle Region"; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP: return "Video ROI Rectangle Delta QP"; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY: return "Video ROI Rectangle Priority"; > + case V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP: return "Video ROI Delta QP Map"; > + case V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP: return "Video ROI Absolute QP Map"; > case V4L2_CID_FWHT_I_FRAME_QP: return "FWHT I-Frame QP Value"; > case V4L2_CID_FWHT_P_FRAME_QP: return "FWHT P-Frame QP Value"; > > @@ -1512,6 +1530,34 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, > *type = V4L2_CTRL_TYPE_INTEGER; > *flags |= V4L2_CTRL_FLAG_READ_ONLY; > break; > + case V4L2_CID_MPEG_VIDEO_ROI_MODE: > + *type = V4L2_CTRL_TYPE_MENU; > + *flags |= V4L2_CTRL_FLAG_UPDATE; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE: > + *type = V4L2_CTRL_TYPE_AREA; > + *flags |= V4L2_CTRL_FLAG_READ_ONLY; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT: > + *type = V4L2_CTRL_TYPE_RECT; > + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP: > + *type = V4L2_CTRL_TYPE_INTEGER; > + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY: > + *type = V4L2_CTRL_TYPE_INTEGER; > + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP: > + *type = V4L2_CTRL_TYPE_INTEGER; > + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; > + break; > + case V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP: > + *type = V4L2_CTRL_TYPE_INTEGER; > + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; > + break; > case V4L2_CID_PIXEL_RATE: > *type = V4L2_CTRL_TYPE_INTEGER64; > *flags |= V4L2_CTRL_FLAG_READ_ONLY; > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h > index 974fd254e573..bf67d53af737 100644 > --- a/include/uapi/linux/v4l2-controls.h > +++ b/include/uapi/linux/v4l2-controls.h > @@ -900,6 +900,22 @@ enum v4l2_mpeg_video_av1_level { > > #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657) > > +enum v4l2_mpeg_video_roi_mode { > + V4L2_MPEG_VIDEO_ROI_MODE_NONE, > + V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP, > + V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY, > + V4L2_MPEG_VIDEO_ROI_MODE_MAP_DELTA_QP, > + V4L2_MPEG_VIDEO_ROI_MODE_MAP_ABSOLUTE_QP > +}; > + > +#define V4L2_CID_MPEG_VIDEO_ROI_MODE (V4L2_CID_CODEC_BASE + 658) > +#define V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE (V4L2_CID_CODEC_BASE + 659) > +#define V4L2_CID_MPEG_VIDEO_ROI_RECT (V4L2_CID_CODEC_BASE + 660) > +#define V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP (V4L2_CID_CODEC_BASE + 661) > +#define V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY (V4L2_CID_CODEC_BASE + 662) > +#define V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP (V4L2_CID_CODEC_BASE + 663) > +#define V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP (V4L2_CID_CODEC_BASE + 664) > + > /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ > #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) > #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) Regards, Hans
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 4a379bd9e3fb..7188d8212677 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1667,6 +1667,101 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Codecs need to always use the specified range, rather then a HW custom range. Applicable to encoders +``V4L2_CID_MPEG_VIDEO_ROI_MODE`` + (enum) + +enum v4l2_mpeg_video_roi_mode - + Indicates Video Encoding region-of-interest (ROI) Mode. + Possible values are: + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_ROI_MODE_NONE`` + - No ROI in the MPEG stream + * - ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP`` + - Rectangle ROI mode and specifies ROI delta QP. + * - ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY`` + - Rectangle ROI mode and specifies ROI priority. + * - ``V4L2_MPEG_VIDEO_ROI_MODE_MAP_DELTA_QP`` + - Map ROI mode and specifies ROI delta QP + * - ``V4L2_MPEG_VIDEO_ROI_MODE_MAP_ABSOLUTE_QP`` + - Map ROI mode and specifies ROI absolute QP value + +``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE (struct)`` + This control returns the ROI block size in pixels. The struct + :c:type:`v4l2_area` provides the width and height in separate + fields. The resolution of the frame will be rounded up to be + aligned to this value when it's partitioned in blocks for QP + maps and the number of QP values in those maps will be the + number of blocks of these indicated pixel size that comprise + a full frame. This control depends on the encoding format, + and the detailed encoder hardware. + Applicable to encoders. + +``V4L2_CID_MPEG_VIDEO_ROI_RECT (struct)`` + A struct :c:type:`v4l2_rect` provides the rectangular region + described by the position of its top-left corner, the width + and the height. The unit is in pixels. And it should be aligned + to the ROI block size, which can be queried from + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. X,Y gets rounded down, + and width/height up. The maximum number of rectangular regions + depends on the hardware. This control is a dynamically sized array. + This control is applicable when ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` + value is ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP`` or + ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY``. For overlapping + regions, the value that is first in the ROI array will have priority. + Applicable to encoders. + +``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP (integer)`` + Specifies the ROI delta QP of a rectangular region. The delta QP + is the value that will be added on top of the frame level QP. + It can be positive (more distortion) or negative (less distortion) + values. This control is applicable when + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is + ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP``, and need to be used + in combination with ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. + This control is a dynamically sized array, and the array size + should match ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. + Applicable to encoders. + +``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY (integer)`` + Specifies the ROI priority of a rectangular region. it can + be positive (more important) or negative (less important) + values and is compared with non-ROI region (taken as value 0). + This control is applicable when ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` + value is ``V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY``, and need + to be used in combination with ``V4L2_CID_MPEG_VIDEO_ROI_RECT``. + Applicable to encoders. + +``V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP (integer)`` + This is to configure ROI as a map as an integer array, + each value represents the delta QP of a block region + in raster scan order. The block size can be got from + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. This control is a + dynamically sized array, the array size can be calculated + from video resolution and the ROI block size, and the + width and height should be rounded up to be aligned to + the block size. This control is applicable when + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is + ``V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP``. + Applicable to encoders. + +``V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP (integer)`` + This is to configure ROI as a map as an integer array, + each value represents the absolute QP of a block region + in raster scan order. The block size can be got from + ``V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE``. This control is a + dynamically sized array, the array size can be calculated + from video resolution and the ROI block size, and the + width and height should be rounded up to be aligned to + the block size. This control is applicable when + ``V4L2_CID_MPEG_VIDEO_ROI_MODE`` value is + ``V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP``. + Applicable to encoders. + .. raw:: latex \normalsize diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c index 1ea52011247a..4d89309bf8d0 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c @@ -612,6 +612,15 @@ const char * const *v4l2_ctrl_get_menu(u32 id) NULL, }; + static const char * const mpeg_video_roi_mode[] = { + "None", + "Rectangle Delta QP", + "Rectangle Priority", + "Map Delta QP", + "Map Absolute QP", + NULL, + }; + switch (id) { case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return mpeg_audio_sampling_freq; @@ -750,6 +759,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return camera_orientation; case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE: return intra_refresh_period_type; + case V4L2_CID_MPEG_VIDEO_ROI_MODE: + return mpeg_video_roi_mode; default: return NULL; } @@ -971,6 +982,13 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX: return "Frame LTR Index"; case V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES: return "Use LTR Frames"; case V4L2_CID_MPEG_VIDEO_AVERAGE_QP: return "Average QP Value"; + case V4L2_CID_MPEG_VIDEO_ROI_MODE: return "Video ROI Mode"; + case V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE: return "Video ROI Block Size"; + case V4L2_CID_MPEG_VIDEO_ROI_RECT: return "Video ROI Rectangle Region"; + case V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP: return "Video ROI Rectangle Delta QP"; + case V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY: return "Video ROI Rectangle Priority"; + case V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP: return "Video ROI Delta QP Map"; + case V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP: return "Video ROI Absolute QP Map"; case V4L2_CID_FWHT_I_FRAME_QP: return "FWHT I-Frame QP Value"; case V4L2_CID_FWHT_P_FRAME_QP: return "FWHT P-Frame QP Value"; @@ -1512,6 +1530,34 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, *type = V4L2_CTRL_TYPE_INTEGER; *flags |= V4L2_CTRL_FLAG_READ_ONLY; break; + case V4L2_CID_MPEG_VIDEO_ROI_MODE: + *type = V4L2_CTRL_TYPE_MENU; + *flags |= V4L2_CTRL_FLAG_UPDATE; + break; + case V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE: + *type = V4L2_CTRL_TYPE_AREA; + *flags |= V4L2_CTRL_FLAG_READ_ONLY; + break; + case V4L2_CID_MPEG_VIDEO_ROI_RECT: + *type = V4L2_CTRL_TYPE_RECT; + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; + break; + case V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; + break; + case V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; + break; + case V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; + break; + case V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_DYNAMIC_ARRAY | V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX; + break; case V4L2_CID_PIXEL_RATE: *type = V4L2_CTRL_TYPE_INTEGER64; *flags |= V4L2_CTRL_FLAG_READ_ONLY; diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 974fd254e573..bf67d53af737 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -900,6 +900,22 @@ enum v4l2_mpeg_video_av1_level { #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657) +enum v4l2_mpeg_video_roi_mode { + V4L2_MPEG_VIDEO_ROI_MODE_NONE, + V4L2_MPEG_VIDEO_ROI_MODE_RECT_DELTA_QP, + V4L2_MPEG_VIDEO_ROI_MODE_RECT_PRIORITY, + V4L2_MPEG_VIDEO_ROI_MODE_MAP_DELTA_QP, + V4L2_MPEG_VIDEO_ROI_MODE_MAP_ABSOLUTE_QP +}; + +#define V4L2_CID_MPEG_VIDEO_ROI_MODE (V4L2_CID_CODEC_BASE + 658) +#define V4L2_CID_MPEG_VIDEO_ROI_BLOCK_SIZE (V4L2_CID_CODEC_BASE + 659) +#define V4L2_CID_MPEG_VIDEO_ROI_RECT (V4L2_CID_CODEC_BASE + 660) +#define V4L2_CID_MPEG_VIDEO_ROI_RECT_DELTA_QP (V4L2_CID_CODEC_BASE + 661) +#define V4L2_CID_MPEG_VIDEO_ROI_RECT_PRIORITY (V4L2_CID_CODEC_BASE + 662) +#define V4L2_CID_MPEG_VIDEO_ROI_MAP_DELTA_QP (V4L2_CID_CODEC_BASE + 663) +#define V4L2_CID_MPEG_VIDEO_ROI_MAP_ABSOLUTE_QP (V4L2_CID_CODEC_BASE + 664) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0)