diff mbox series

[13/13] arm64: dts: allwinner: a100: Add CPU Operating Performance Points table

Message ID 20241024170540.2721307-14-masterr3c0rd@epochal.quest (mailing list archive)
State New
Headers show
Series sunxi: A100/A133 second stage support | expand

Commit Message

Cody Eksal Oct. 24, 2024, 5:05 p.m. UTC 
From: Shuosheng Huang <huangshuosheng@allwinnertech.com>

Add an Operating Performance Points table for the CPU cores to
enable Dynamic Voltage & Frequency Scaling on the A100.

Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
[masterr3c0rd@epochal.quest: fix typos in -cpu-opp, use compatible]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
---
 .../allwinner/sun50i-a100-allwinner-perf1.dts |  5 ++
 .../dts/allwinner/sun50i-a100-cpu-opp.dtsi    | 90 +++++++++++++++++++
 .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  8 ++
 3 files changed, 103 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi

Comments

Andre Przywara Oct. 25, 2024, 12:27 p.m. UTC | #1 
On Thu, 24 Oct 2024 14:05:31 -0300
Cody Eksal <masterr3c0rd@epochal.quest> wrote:

> From: Shuosheng Huang <huangshuosheng@allwinnertech.com>
> 
> Add an Operating Performance Points table for the CPU cores to
> enable Dynamic Voltage & Frequency Scaling on the A100.
> 
> Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
> [masterr3c0rd@epochal.quest: fix typos in -cpu-opp, use compatible]
> Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
> ---
>  .../allwinner/sun50i-a100-allwinner-perf1.dts |  5 ++
>  .../dts/allwinner/sun50i-a100-cpu-opp.dtsi    | 90 +++++++++++++++++++
>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  8 ++
>  3 files changed, 103 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> index 29e9d24da8b6..99b1b2f7b92a 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "sun50i-a100.dtsi"
> +#include "sun50i-a100-cpu-opp.dtsi"
>  
>  #include <dt-bindings/gpio/gpio.h>
>  
> @@ -67,6 +68,10 @@ &usb_otg {
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &pio {
>  	vcc-pb-supply = <&reg_dcdc1>;
>  	vcc-pc-supply = <&reg_eldo1>;
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
> new file mode 100644
> index 000000000000..eeb8d20f3fb4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
> +// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
> +
> +/ {
> +	cpu_opp_table: cpu-opp-table {
> +		compatible = "allwinner,sun50i-a100-operating-points";
> +		nvmem-cells = <&cpu_speed_grade>;
> +		opp-shared;
> +
> +		opp@408000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <408000000>;
> +
> +			opp-microvolt-speed0 = <900000 900000 1200000>;
> +			opp-microvolt-speed1 = <900000 900000 1200000>;
> +			opp-microvolt-speed2 = <900000 900000 1200000>;

Is there actually an advantage when using the three cells version?
I wonder if we should go with just the target voltage (the first cell
here), as done for the H616.

Apart from that it looks fine to me.

Cheers,
Andre.

> +		};
> +
> +		opp@600000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <600000000>;
> +
> +			opp-microvolt-speed0 = <900000 900000 1200000>;
> +			opp-microvolt-speed1 = <900000 900000 1200000>;
> +			opp-microvolt-speed2 = <900000 900000 1200000>;
> +		};
> +
> +		opp@816000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <816000000>;
> +
> +			opp-microvolt-speed0 = <940000 940000 1200000>;
> +			opp-microvolt-speed1 = <900000 900000 1200000>;
> +			opp-microvolt-speed2 = <900000 900000 1200000>;
> +		};
> +
> +		opp@1080000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <1080000000>;
> +
> +			opp-microvolt-speed0 = <1020000 1020000 1200000>;
> +			opp-microvolt-speed1 = <980000 980000 1200000>;
> +			opp-microvolt-speed2 = <950000 950000 1200000>;
> +		};
> +
> +		opp@1200000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <1200000000>;
> +
> +			opp-microvolt-speed0 = <1100000 1100000 1200000>;
> +			opp-microvolt-speed1 = <1020000 1020000 1200000>;
> +			opp-microvolt-speed2 = <1000000 1000000 1200000>;
> +		};
> +
> +		opp@1320000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <1320000000>;
> +
> +			opp-microvolt-speed0 = <1160000 1160000 1200000>;
> +			opp-microvolt-speed1 = <1060000 1060000 1200000>;
> +			opp-microvolt-speed2 = <1030000 1030000 1200000>;
> +		};
> +
> +		opp@1464000000 {
> +			clock-latency-ns = <244144>; /* 8 32k periods */
> +			opp-hz = /bits/ 64 <1464000000>;
> +
> +			opp-microvolt-speed0 = <1180000 1180000 1200000>;
> +			opp-microvolt-speed1 = <1180000 1180000 1200000>;
> +			opp-microvolt-speed2 = <1130000 1130000 1200000>;
> +		};
> +	};
> +};
> +
> +&cpu0 {
> +	operating-points-v2 = <&cpu_opp_table>;
> +};
> +
> +&cpu1 {
> +	operating-points-v2 = <&cpu_opp_table>;
> +};
> +
> +&cpu2 {
> +	operating-points-v2 = <&cpu_opp_table>;
> +};
> +
> +&cpu3 {
> +	operating-points-v2 = <&cpu_opp_table>;
> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index 6dca766ea222..747a0292ef98 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -23,6 +23,7 @@ cpu0: cpu@0 {
>  			device_type = "cpu";
>  			reg = <0x0>;
>  			enable-method = "psci";
> +			clocks = <&ccu CLK_CPUX>;
>  		};
>  
>  		cpu1: cpu@1 {
> @@ -30,6 +31,7 @@ cpu1: cpu@1 {
>  			device_type = "cpu";
>  			reg = <0x1>;
>  			enable-method = "psci";
> +			clocks = <&ccu CLK_CPUX>;
>  		};
>  
>  		cpu2: cpu@2 {
> @@ -37,6 +39,7 @@ cpu2: cpu@2 {
>  			device_type = "cpu";
>  			reg = <0x2>;
>  			enable-method = "psci";
> +			clocks = <&ccu CLK_CPUX>;
>  		};
>  
>  		cpu3: cpu@3 {
> @@ -44,6 +47,7 @@ cpu3: cpu@3 {
>  			device_type = "cpu";
>  			reg = <0x3>;
>  			enable-method = "psci";
> +			clocks = <&ccu CLK_CPUX>;
>  		};
>  	};
>  
> @@ -142,6 +146,10 @@ efuse@3006000 {
>  			ths_calibration: calib@14 {
>  				reg = <0x14 8>;
>  			};
> +
> +			cpu_speed_grade: cpu-speed-grade@1c {
> +				reg = <0x1c 0x2>;
> +			};
>  		};
>  
>  		watchdog@30090a0 {
Cody Eksal Oct. 28, 2024, 4:42 p.m. UTC | #2 
On 2024/10/25 9:27 am, Andre Przywara wrote:
> On Thu, 24 Oct 2024 14:05:31 -0300
> Cody Eksal <masterr3c0rd@epochal.quest> wrote:
> 
>> From: Shuosheng Huang <huangshuosheng@allwinnertech.com>
>> 
>> Add an Operating Performance Points table for the CPU cores to
>> enable Dynamic Voltage & Frequency Scaling on the A100.
>> 
>> Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
>> [masterr3c0rd@epochal.quest: fix typos in -cpu-opp, use compatible]
>> Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
>> ---
>>  .../allwinner/sun50i-a100-allwinner-perf1.dts |  5 ++
>>  .../dts/allwinner/sun50i-a100-cpu-opp.dtsi    | 90 
>> +++++++++++++++++++
>>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  8 ++
>>  3 files changed, 103 insertions(+)
>>  create mode 100644 
>> arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
>> 
>> diff --git 
>> a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts 
>> b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
>> index 29e9d24da8b6..99b1b2f7b92a 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
>> @@ -6,6 +6,7 @@
>>  /dts-v1/;
>> 
>>  #include "sun50i-a100.dtsi"
>> +#include "sun50i-a100-cpu-opp.dtsi"
>> 
>>  #include <dt-bindings/gpio/gpio.h>
>> 
>> @@ -67,6 +68,10 @@ &usb_otg {
>>  	status = "okay";
>>  };
>> 
>> +&cpu0 {
>> +	cpu-supply = <&reg_dcdc2>;
>> +};
>> +
>>  &pio {
>>  	vcc-pb-supply = <&reg_dcdc1>;
>>  	vcc-pc-supply = <&reg_eldo1>;
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi 
>> b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
>> new file mode 100644
>> index 000000000000..eeb8d20f3fb4
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
>> @@ -0,0 +1,90 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
>> +// Copyright (c) 2020 ShuoSheng Huang 
>> <huangshuosheng@allwinnertech.com>
>> +
>> +/ {
>> +	cpu_opp_table: cpu-opp-table {
>> +		compatible = "allwinner,sun50i-a100-operating-points";
>> +		nvmem-cells = <&cpu_speed_grade>;
>> +		opp-shared;
>> +
>> +		opp@408000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <408000000>;
>> +
>> +			opp-microvolt-speed0 = <900000 900000 1200000>;
>> +			opp-microvolt-speed1 = <900000 900000 1200000>;
>> +			opp-microvolt-speed2 = <900000 900000 1200000>;
> 
> Is there actually an advantage when using the three cells version?
> I wonder if we should go with just the target voltage (the first cell
> here), as done for the H616.
It probably makes sense to follow precedent; I've updated V2 to make 
these single-cell.
> Apart from that it looks fine to me.
I did get a comment from Rob's bot that picked up some issues with the 
namings of these nodes; I've updated that as well.

Thanks!
- Cody
> Cheers,
> Andre.
> 
>> +		};
>> +
>> +		opp@600000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <600000000>;
>> +
>> +			opp-microvolt-speed0 = <900000 900000 1200000>;
>> +			opp-microvolt-speed1 = <900000 900000 1200000>;
>> +			opp-microvolt-speed2 = <900000 900000 1200000>;
>> +		};
>> +
>> +		opp@816000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <816000000>;
>> +
>> +			opp-microvolt-speed0 = <940000 940000 1200000>;
>> +			opp-microvolt-speed1 = <900000 900000 1200000>;
>> +			opp-microvolt-speed2 = <900000 900000 1200000>;
>> +		};
>> +
>> +		opp@1080000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <1080000000>;
>> +
>> +			opp-microvolt-speed0 = <1020000 1020000 1200000>;
>> +			opp-microvolt-speed1 = <980000 980000 1200000>;
>> +			opp-microvolt-speed2 = <950000 950000 1200000>;
>> +		};
>> +
>> +		opp@1200000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <1200000000>;
>> +
>> +			opp-microvolt-speed0 = <1100000 1100000 1200000>;
>> +			opp-microvolt-speed1 = <1020000 1020000 1200000>;
>> +			opp-microvolt-speed2 = <1000000 1000000 1200000>;
>> +		};
>> +
>> +		opp@1320000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <1320000000>;
>> +
>> +			opp-microvolt-speed0 = <1160000 1160000 1200000>;
>> +			opp-microvolt-speed1 = <1060000 1060000 1200000>;
>> +			opp-microvolt-speed2 = <1030000 1030000 1200000>;
>> +		};
>> +
>> +		opp@1464000000 {
>> +			clock-latency-ns = <244144>; /* 8 32k periods */
>> +			opp-hz = /bits/ 64 <1464000000>;
>> +
>> +			opp-microvolt-speed0 = <1180000 1180000 1200000>;
>> +			opp-microvolt-speed1 = <1180000 1180000 1200000>;
>> +			opp-microvolt-speed2 = <1130000 1130000 1200000>;
>> +		};
>> +	};
>> +};
>> +
>> +&cpu0 {
>> +	operating-points-v2 = <&cpu_opp_table>;
>> +};
>> +
>> +&cpu1 {
>> +	operating-points-v2 = <&cpu_opp_table>;
>> +};
>> +
>> +&cpu2 {
>> +	operating-points-v2 = <&cpu_opp_table>;
>> +};
>> +
>> +&cpu3 {
>> +	operating-points-v2 = <&cpu_opp_table>;
>> +};
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi 
>> b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
>> index 6dca766ea222..747a0292ef98 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
>> @@ -23,6 +23,7 @@ cpu0: cpu@0 {
>>  			device_type = "cpu";
>>  			reg = <0x0>;
>>  			enable-method = "psci";
>> +			clocks = <&ccu CLK_CPUX>;
>>  		};
>> 
>>  		cpu1: cpu@1 {
>> @@ -30,6 +31,7 @@ cpu1: cpu@1 {
>>  			device_type = "cpu";
>>  			reg = <0x1>;
>>  			enable-method = "psci";
>> +			clocks = <&ccu CLK_CPUX>;
>>  		};
>> 
>>  		cpu2: cpu@2 {
>> @@ -37,6 +39,7 @@ cpu2: cpu@2 {
>>  			device_type = "cpu";
>>  			reg = <0x2>;
>>  			enable-method = "psci";
>> +			clocks = <&ccu CLK_CPUX>;
>>  		};
>> 
>>  		cpu3: cpu@3 {
>> @@ -44,6 +47,7 @@ cpu3: cpu@3 {
>>  			device_type = "cpu";
>>  			reg = <0x3>;
>>  			enable-method = "psci";
>> +			clocks = <&ccu CLK_CPUX>;
>>  		};
>>  	};
>> 
>> @@ -142,6 +146,10 @@ efuse@3006000 {
>>  			ths_calibration: calib@14 {
>>  				reg = <0x14 8>;
>>  			};
>> +
>> +			cpu_speed_grade: cpu-speed-grade@1c {
>> +				reg = <0x1c 0x2>;
>> +			};
>>  		};
>> 
>>  		watchdog@30090a0 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
index 29e9d24da8b6..99b1b2f7b92a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -6,6 +6,7 @@ 
 /dts-v1/;
 
 #include "sun50i-a100.dtsi"
+#include "sun50i-a100-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -67,6 +68,10 @@  &usb_otg {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &pio {
 	vcc-pb-supply = <&reg_dcdc1>;
 	vcc-pc-supply = <&reg_eldo1>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
new file mode 100644
index 000000000000..eeb8d20f3fb4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
@@ -0,0 +1,90 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@allwinnertech.com>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "allwinner,sun50i-a100-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp@408000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <408000000>;
+
+			opp-microvolt-speed0 = <900000 900000 1200000>;
+			opp-microvolt-speed1 = <900000 900000 1200000>;
+			opp-microvolt-speed2 = <900000 900000 1200000>;
+		};
+
+		opp@600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+
+			opp-microvolt-speed0 = <900000 900000 1200000>;
+			opp-microvolt-speed1 = <900000 900000 1200000>;
+			opp-microvolt-speed2 = <900000 900000 1200000>;
+		};
+
+		opp@816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <940000 940000 1200000>;
+			opp-microvolt-speed1 = <900000 900000 1200000>;
+			opp-microvolt-speed2 = <900000 900000 1200000>;
+		};
+
+		opp@1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <1020000 1020000 1200000>;
+			opp-microvolt-speed1 = <980000 980000 1200000>;
+			opp-microvolt-speed2 = <950000 950000 1200000>;
+		};
+
+		opp@1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+
+			opp-microvolt-speed0 = <1100000 1100000 1200000>;
+			opp-microvolt-speed1 = <1020000 1020000 1200000>;
+			opp-microvolt-speed2 = <1000000 1000000 1200000>;
+		};
+
+		opp@1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1160000 1160000 1200000>;
+			opp-microvolt-speed1 = <1060000 1060000 1200000>;
+			opp-microvolt-speed2 = <1030000 1030000 1200000>;
+		};
+
+		opp@1464000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1464000000>;
+
+			opp-microvolt-speed0 = <1180000 1180000 1200000>;
+			opp-microvolt-speed1 = <1180000 1180000 1200000>;
+			opp-microvolt-speed2 = <1130000 1130000 1200000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 6dca766ea222..747a0292ef98 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -23,6 +23,7 @@  cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu1: cpu@1 {
@@ -30,6 +31,7 @@  cpu1: cpu@1 {
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu2: cpu@2 {
@@ -37,6 +39,7 @@  cpu2: cpu@2 {
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 
 		cpu3: cpu@3 {
@@ -44,6 +47,7 @@  cpu3: cpu@3 {
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
 		};
 	};
 
@@ -142,6 +146,10 @@  efuse@3006000 {
 			ths_calibration: calib@14 {
 				reg = <0x14 8>;
 			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x2>;
+			};
 		};
 
 		watchdog@30090a0 {