diff mbox series

[13/21] target/xtensa: Factor out calls to set_use_first_nan()

Message ID 20241025141254.2141506-14-peter.maydell@linaro.org (mailing list archive)
State New
Headers show
Series softfloat: Set 2-NaN propagation rule in float_status, not at compile time | expand

Commit Message

Peter Maydell Oct. 25, 2024, 2:12 p.m. UTC 
In xtensa we currently call set_use_first_nan() in a lot of
places where we want to switch the NaN-propagation handling.
We're about to change the softfloat API we use to do that,
so start by factoring all the calls out into a single
xtensa_use_first_nan() function.

The bulk of this change was done with
 sed -i -e 's/set_use_first_nan(\([^,]*\),[^)]*)/xtensa_use_first_nan(env, \1)/'  target/xtensa/fpu_helper.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/xtensa/cpu.h        |  6 ++++++
 target/xtensa/cpu.c        |  2 +-
 target/xtensa/fpu_helper.c | 33 +++++++++++++++++++--------------
 3 files changed, 26 insertions(+), 15 deletions(-)

Comments

Max Filippov Oct. 25, 2024, 3:54 p.m. UTC | #1 
On Fri, Oct 25, 2024 at 7:13 AM Peter Maydell <peter.maydell@linaro.org> wrote:
>
> In xtensa we currently call set_use_first_nan() in a lot of
> places where we want to switch the NaN-propagation handling.
> We're about to change the softfloat API we use to do that,
> so start by factoring all the calls out into a single
> xtensa_use_first_nan() function.
>
> The bulk of this change was done with
>  sed -i -e 's/set_use_first_nan(\([^,]*\),[^)]*)/xtensa_use_first_nan(env, \1)/'  target/xtensa/fpu_helper.c
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  target/xtensa/cpu.h        |  6 ++++++
>  target/xtensa/cpu.c        |  2 +-
>  target/xtensa/fpu_helper.c | 33 +++++++++++++++++++--------------
>  3 files changed, 26 insertions(+), 15 deletions(-)

Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Richard Henderson Oct. 28, 2024, 12:21 p.m. UTC | #2 
On 10/25/24 15:12, Peter Maydell wrote:
> In xtensa we currently call set_use_first_nan() in a lot of
> places where we want to switch the NaN-propagation handling.
> We're about to change the softfloat API we use to do that,
> so start by factoring all the calls out into a single
> xtensa_use_first_nan() function.
> 
> The bulk of this change was done with
>   sed -i -e 's/set_use_first_nan(\([^,]*\),[^)]*)/xtensa_use_first_nan(env, \1)/'  target/xtensa/fpu_helper.c
> 
> Signed-off-by: Peter Maydell<peter.maydell@linaro.org>
> ---
>   target/xtensa/cpu.h        |  6 ++++++
>   target/xtensa/cpu.c        |  2 +-
>   target/xtensa/fpu_helper.c | 33 +++++++++++++++++++--------------
>   3 files changed, 26 insertions(+), 15 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~
diff mbox series

Patch

diff --git a/target/xtensa/cpu.h b/target/xtensa/cpu.h
index 9f2341d8563..77e48eef19c 100644
--- a/target/xtensa/cpu.h
+++ b/target/xtensa/cpu.h
@@ -802,4 +802,10 @@  static inline void cpu_get_tb_cpu_state(CPUXtensaState *env, vaddr *pc,
 XtensaCPU *xtensa_cpu_create_with_clock(const char *cpu_type,
                                         Clock *cpu_refclk);
 
+/*
+ * Set the NaN propagation rule for future FPU operations:
+ * use_first is true to pick the first NaN as the result if both
+ * inputs are NaNs, false to pick the second.
+ */
+void xtensa_use_first_nan(CPUXtensaState *env, bool use_first);
 #endif
diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c
index a08c7a0b1f2..6f9039abaee 100644
--- a/target/xtensa/cpu.c
+++ b/target/xtensa/cpu.c
@@ -134,7 +134,7 @@  static void xtensa_cpu_reset_hold(Object *obj, ResetType type)
     cs->halted = env->runstall;
 #endif
     set_no_signaling_nans(!dfpu, &env->fp_status);
-    set_use_first_nan(!dfpu, &env->fp_status);
+    xtensa_use_first_nan(env, !dfpu);
 }
 
 static ObjectClass *xtensa_cpu_class_by_name(const char *cpu_model)
diff --git a/target/xtensa/fpu_helper.c b/target/xtensa/fpu_helper.c
index 381e83ded83..50a5efa65e2 100644
--- a/target/xtensa/fpu_helper.c
+++ b/target/xtensa/fpu_helper.c
@@ -57,6 +57,11 @@  static const struct {
     { XTENSA_FP_V, float_flag_invalid, },
 };
 
+void xtensa_use_first_nan(CPUXtensaState *env, bool use_first)
+{
+    set_use_first_nan(use_first, &env->fp_status);
+}
+
 void HELPER(wur_fpu2k_fcr)(CPUXtensaState *env, uint32_t v)
 {
     static const int rounding_mode[] = {
@@ -171,87 +176,87 @@  float32 HELPER(fpu2k_msub_s)(CPUXtensaState *env,
 
 float64 HELPER(add_d)(CPUXtensaState *env, float64 a, float64 b)
 {
-    set_use_first_nan(true, &env->fp_status);
+    xtensa_use_first_nan(env, true);
     return float64_add(a, b, &env->fp_status);
 }
 
 float32 HELPER(add_s)(CPUXtensaState *env, float32 a, float32 b)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_add(a, b, &env->fp_status);
 }
 
 float64 HELPER(sub_d)(CPUXtensaState *env, float64 a, float64 b)
 {
-    set_use_first_nan(true, &env->fp_status);
+    xtensa_use_first_nan(env, true);
     return float64_sub(a, b, &env->fp_status);
 }
 
 float32 HELPER(sub_s)(CPUXtensaState *env, float32 a, float32 b)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_sub(a, b, &env->fp_status);
 }
 
 float64 HELPER(mul_d)(CPUXtensaState *env, float64 a, float64 b)
 {
-    set_use_first_nan(true, &env->fp_status);
+    xtensa_use_first_nan(env, true);
     return float64_mul(a, b, &env->fp_status);
 }
 
 float32 HELPER(mul_s)(CPUXtensaState *env, float32 a, float32 b)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_mul(a, b, &env->fp_status);
 }
 
 float64 HELPER(madd_d)(CPUXtensaState *env, float64 a, float64 b, float64 c)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float64_muladd(b, c, a, 0, &env->fp_status);
 }
 
 float32 HELPER(madd_s)(CPUXtensaState *env, float32 a, float32 b, float32 c)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_muladd(b, c, a, 0, &env->fp_status);
 }
 
 float64 HELPER(msub_d)(CPUXtensaState *env, float64 a, float64 b, float64 c)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float64_muladd(b, c, a, float_muladd_negate_product,
                           &env->fp_status);
 }
 
 float32 HELPER(msub_s)(CPUXtensaState *env, float32 a, float32 b, float32 c)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_muladd(b, c, a, float_muladd_negate_product,
                           &env->fp_status);
 }
 
 float64 HELPER(mkdadj_d)(CPUXtensaState *env, float64 a, float64 b)
 {
-    set_use_first_nan(true, &env->fp_status);
+    xtensa_use_first_nan(env, true);
     return float64_div(b, a, &env->fp_status);
 }
 
 float32 HELPER(mkdadj_s)(CPUXtensaState *env, float32 a, float32 b)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_div(b, a, &env->fp_status);
 }
 
 float64 HELPER(mksadj_d)(CPUXtensaState *env, float64 v)
 {
-    set_use_first_nan(true, &env->fp_status);
+    xtensa_use_first_nan(env, true);
     return float64_sqrt(v, &env->fp_status);
 }
 
 float32 HELPER(mksadj_s)(CPUXtensaState *env, float32 v)
 {
-    set_use_first_nan(env->config->use_first_nan, &env->fp_status);
+    xtensa_use_first_nan(env, env->config->use_first_nan);
     return float32_sqrt(v, &env->fp_status);
 }