diff mbox series

USB: serial: option: add Fibocom FG132 0x0112 composition

Message ID ZxLN-sb0ujuap36t@arcor.de (mailing list archive)
State New
Headers show
Series USB: serial: option: add Fibocom FG132 0x0112 composition | expand

Commit Message

Reinhard Speyerer Oct. 18, 2024, 9:07 p.m. UTC 
Add Fibocom FG132 0x0112 composition:

T:  Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0112 Rev= 5.15
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom Module
S:  SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
---

Comments

Johan Hovold Oct. 29, 2024, 11:50 a.m. UTC | #1 
On Fri, Oct 18, 2024 at 11:07:06PM +0200, Reinhard Speyerer wrote:
> Add Fibocom FG132 0x0112 composition:

> Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>

Now applied, thanks.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index eb0731992ca9..756a6ba06ec2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2312,6 +2312,9 @@  static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x30) },	/* Fibocom FG132 DIAG */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0xff, 0x40) },	/* Fibocom FG132 AT */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x0112, 0xff, 0, 0) },		/* Fibocom FG132 NMEA */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff),			/* Fibocom FM135 (laptop MBIM) */
 	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */