| Message ID | 20241025-dpu-virtual-wide-v6-8-0310fd519765@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | drm/msm/dpu: support virtual wide planes | expand |
On 10/24/2024 5:20 PM, Dmitry Baryshkov wrote: > Virtual wide planes give high amount of flexibility, but it is not > always enough: > > In parallel multirect case only the half of the usual width is supported > for tiled formats. Thus the whole width of two tiled multirect > rectangles can not be greater than max_linewidth, which is not enough > for some platforms/compositors. > > Another example is as simple as wide YUV plane. YUV planes can not use > multirect, so currently they are limited to max_linewidth too. > > Now that the planes are fully virtualized, add support for allocating > two SSPP blocks to drive a single DRM plane. This fixes both mentioned > cases and allows all planes to go up to 2*max_linewidth (at the cost of > making some of the planes unavailable to the user). > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 163 ++++++++++++++++++++++-------- > 1 file changed, 119 insertions(+), 44 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > index 125db3803cf5..ad6cc469f475 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > @@ -20,7 +20,6 @@ > #include "msm_drv.h" > #include "msm_mdss.h" > #include "dpu_kms.h" > -#include "dpu_formats.h" > #include "dpu_hw_sspp.h" > #include "dpu_hw_util.h" > #include "dpu_trace.h" > @@ -888,6 +887,28 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane, > return 0; > } > > +static int dpu_plane_is_multirect_parallel_capable(struct dpu_sw_pipe *pipe, > + struct dpu_sw_pipe_cfg *pipe_cfg, > + const struct msm_format *fmt, > + uint32_t max_linewidth) > +{ > + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect)) > + return false; > + > + if (pipe_cfg->rotation & DRM_MODE_ROTATE_90) > + return false; > + > + if (MSM_FORMAT_IS_YUV(fmt)) > + return false; > + > + if (MSM_FORMAT_IS_UBWC(fmt) && > + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth / 2) > + return false; > + > + return true; > +} Dont we also need to check for if (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))? return false; > + > static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > struct drm_atomic_state *state, > const struct drm_crtc_state *crtc_state) > @@ -901,7 +922,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > const struct msm_format *fmt; > struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; > struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; > - uint32_t max_linewidth; > uint32_t supported_rotations; > const struct dpu_sspp_cfg *pipe_hw_caps; > const struct dpu_sspp_sub_blks *sblk; > @@ -923,8 +943,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > > fmt = msm_framebuffer_format(new_plane_state->fb); > > - max_linewidth = pdpu->catalog->caps->max_linewidth; > - > supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; > > if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) > @@ -940,41 +958,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > return ret; > > if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { > - /* > - * In parallel multirect case only the half of the usual width > - * is supported for tiled formats. If we are here, we know that > - * full width is more than max_linewidth, thus each rect is > - * wider than allowed. > - */ > - if (MSM_FORMAT_IS_UBWC(fmt) && > - drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { > - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", > - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > - return -E2BIG; > - } > - > - if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > - drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || > - (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && > - !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || > - pipe_cfg->rotation & DRM_MODE_ROTATE_90 || > - MSM_FORMAT_IS_YUV(fmt)) { > - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", > - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > - return -E2BIG; > - } > - > - /* > - * Use multirect for wide plane. We do not support dynamic > - * assignment of SSPPs, so we know the configuration. > - */ > - pipe->multirect_index = DPU_SSPP_RECT_0; > - pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > - > - r_pipe->sspp = pipe->sspp; > - r_pipe->multirect_index = DPU_SSPP_RECT_1; > - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > - > ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt, > &crtc_state->adjusted_mode); > if (ret) > @@ -995,16 +978,16 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); > struct dpu_sw_pipe *pipe = &pstate->pipe; > struct dpu_sw_pipe *r_pipe = &pstate->r_pipe; > + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; > + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; > const struct drm_crtc_state *crtc_state = NULL; > > if (new_plane_state->crtc) > crtc_state = drm_atomic_get_new_crtc_state(state, > new_plane_state->crtc); > > - if (pdpu->pipe != SSPP_NONE) { > - pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); > - r_pipe->sspp = NULL; > - } > + pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); > + r_pipe->sspp = NULL; > > if (!pipe->sspp) > return -EINVAL; > @@ -1021,6 +1004,49 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { > + uint32_t max_linewidth = dpu_kms->catalog->caps->max_linewidth; > + const struct msm_format *fmt; > + > + fmt = msm_framebuffer_format(new_plane_state->fb); > + > + /* > + * In parallel multirect case only the half of the usual width > + * is supported for tiled formats. If we are here, we know that > + * full width is more than max_linewidth, thus each rect is > + * wider than allowed. > + */ > + if (MSM_FORMAT_IS_UBWC(fmt) && > + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { > + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", > + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > + return -E2BIG; > + } > + > + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || > + (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && > + !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || > + pipe_cfg->rotation & DRM_MODE_ROTATE_90 || > + MSM_FORMAT_IS_YUV(fmt)) { > + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", > + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > + return -E2BIG; > + } Dont the above two conditions translate to !dpu_plane_is_multirect_parallel_capable()? I think once we have a unified plane atomic check and not a separate one for virtual planes (we had to add one to support the modparam), some duplication will go away but till then I think this is the best we can do. > + > + /* > + * Use multirect for wide plane. We do not support dynamic > + * assignment of SSPPs, so we know the configuration. > + */ > + r_pipe->sspp = pipe->sspp; > + > + pipe->multirect_index = DPU_SSPP_RECT_0; > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > + > + r_pipe->multirect_index = DPU_SSPP_RECT_1; > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > + } > + > return dpu_plane_atomic_check_sspp(plane, state, crtc_state); > } > > @@ -1054,8 +1080,16 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane, > return 0; > } > > - /* force resource reallocation if the format of FB has changed */ > + /* > + * Force resource reallocation if the format of FB or src/dst have > + * changed. We might need to allocate different SSPP or SSPPs for this > + * plane than the one used previously. > + */ > if (!old_plane_state || !old_plane_state->fb || > + old_plane_state->src_w != plane_state->src_w || > + old_plane_state->src_h != plane_state->src_h || > + old_plane_state->src_w != plane_state->src_w || > + old_plane_state->crtc_h != plane_state->crtc_h || > msm_framebuffer_format(old_plane_state->fb) != > msm_framebuffer_format(plane_state->fb)) > crtc_state->planes_changed = true; > @@ -1075,7 +1109,10 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > struct dpu_plane_state *pstate; > struct dpu_sw_pipe *pipe; > struct dpu_sw_pipe *r_pipe; > + struct dpu_sw_pipe_cfg *pipe_cfg; > + struct dpu_sw_pipe_cfg *r_pipe_cfg; > const struct msm_format *fmt; > + uint32_t max_linewidth; > > if (plane_state->crtc) > crtc_state = drm_atomic_get_new_crtc_state(state, > @@ -1084,6 +1121,8 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > pstate = to_dpu_plane_state(plane_state); > pipe = &pstate->pipe; > r_pipe = &pstate->r_pipe; > + pipe_cfg = &pstate->pipe_cfg; > + r_pipe_cfg = &pstate->r_pipe_cfg; > > pipe->sspp = NULL; > r_pipe->sspp = NULL; > @@ -1098,10 +1137,46 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > > reqs.rot90 = drm_rotation_90_or_270(plane_state->rotation); > > + max_linewidth = dpu_kms->catalog->caps->max_linewidth; > + > pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); > if (!pipe->sspp) > return -ENODEV; > > + if (drm_rect_width(&r_pipe_cfg->src_rect) == 0) { > + pipe->multirect_index = DPU_SSPP_RECT_SOLO; > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > + > + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > + > + r_pipe->sspp = NULL; > + } else { > + if (dpu_plane_is_multirect_parallel_capable(pipe, pipe_cfg, fmt, max_linewidth) && > + dpu_plane_is_multirect_parallel_capable(r_pipe, r_pipe_cfg, fmt, max_linewidth) && > + (test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) || > + test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))) { > + r_pipe->sspp = pipe->sspp; > + > + pipe->multirect_index = DPU_SSPP_RECT_0; > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > + > + r_pipe->multirect_index = DPU_SSPP_RECT_1; > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > + } else { > + /* multirect is not possible, use two SSPP blocks */ > + r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); > + if (!r_pipe->sspp) > + return -ENODEV; > + > + pipe->multirect_index = DPU_SSPP_RECT_SOLO; > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > + > + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > + } > + } > + > return dpu_plane_atomic_check_sspp(plane, state, crtc_state); > } > >
On Tue, Oct 29, 2024 at 03:07:30PM -0700, Abhinav Kumar wrote: > > > On 10/24/2024 5:20 PM, Dmitry Baryshkov wrote: > > Virtual wide planes give high amount of flexibility, but it is not > > always enough: > > > > In parallel multirect case only the half of the usual width is supported > > for tiled formats. Thus the whole width of two tiled multirect > > rectangles can not be greater than max_linewidth, which is not enough > > for some platforms/compositors. > > > > Another example is as simple as wide YUV plane. YUV planes can not use > > multirect, so currently they are limited to max_linewidth too. > > > > Now that the planes are fully virtualized, add support for allocating > > two SSPP blocks to drive a single DRM plane. This fixes both mentioned > > cases and allows all planes to go up to 2*max_linewidth (at the cost of > > making some of the planes unavailable to the user). > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 163 ++++++++++++++++++++++-------- > > 1 file changed, 119 insertions(+), 44 deletions(-) > > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > > index 125db3803cf5..ad6cc469f475 100644 > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > > @@ -20,7 +20,6 @@ > > #include "msm_drv.h" > > #include "msm_mdss.h" > > #include "dpu_kms.h" > > -#include "dpu_formats.h" > > #include "dpu_hw_sspp.h" > > #include "dpu_hw_util.h" > > #include "dpu_trace.h" > > @@ -888,6 +887,28 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane, > > return 0; > > } > > +static int dpu_plane_is_multirect_parallel_capable(struct dpu_sw_pipe *pipe, > > + struct dpu_sw_pipe_cfg *pipe_cfg, > > + const struct msm_format *fmt, > > + uint32_t max_linewidth) > > +{ > > + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > > + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect)) > > + return false; > > + > > + if (pipe_cfg->rotation & DRM_MODE_ROTATE_90) > > + return false; > > + > > + if (MSM_FORMAT_IS_YUV(fmt)) > > + return false; > > + > > + if (MSM_FORMAT_IS_UBWC(fmt) && > > + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth / 2) > > + return false; > > + > > + return true; > > +} > > Dont we also need to check for > > if (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && > !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))? > return false; In the patch I was checking that after a call to this function, but maybe you are right. Especially since I was checking only the pipe, not the r_pipe. > > > + > > static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > > struct drm_atomic_state *state, > > const struct drm_crtc_state *crtc_state) > > @@ -901,7 +922,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > > const struct msm_format *fmt; > > struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; > > struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; > > - uint32_t max_linewidth; > > uint32_t supported_rotations; > > const struct dpu_sspp_cfg *pipe_hw_caps; > > const struct dpu_sspp_sub_blks *sblk; > > @@ -923,8 +943,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > > fmt = msm_framebuffer_format(new_plane_state->fb); > > - max_linewidth = pdpu->catalog->caps->max_linewidth; > > - > > supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; > > if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) > > @@ -940,41 +958,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, > > return ret; > > if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { > > - /* > > - * In parallel multirect case only the half of the usual width > > - * is supported for tiled formats. If we are here, we know that > > - * full width is more than max_linewidth, thus each rect is > > - * wider than allowed. > > - */ > > - if (MSM_FORMAT_IS_UBWC(fmt) && > > - drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { > > - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", > > - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > > - return -E2BIG; > > - } > > - > > - if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > > - drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || > > - (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && > > - !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || > > - pipe_cfg->rotation & DRM_MODE_ROTATE_90 || > > - MSM_FORMAT_IS_YUV(fmt)) { > > - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", > > - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > > - return -E2BIG; > > - } > > - > > - /* > > - * Use multirect for wide plane. We do not support dynamic > > - * assignment of SSPPs, so we know the configuration. > > - */ > > - pipe->multirect_index = DPU_SSPP_RECT_0; > > - pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > - > > - r_pipe->sspp = pipe->sspp; > > - r_pipe->multirect_index = DPU_SSPP_RECT_1; > > - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > - > > ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt, > > &crtc_state->adjusted_mode); > > if (ret) > > @@ -995,16 +978,16 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > > struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); > > struct dpu_sw_pipe *pipe = &pstate->pipe; > > struct dpu_sw_pipe *r_pipe = &pstate->r_pipe; > > + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; > > + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; > > const struct drm_crtc_state *crtc_state = NULL; > > if (new_plane_state->crtc) > > crtc_state = drm_atomic_get_new_crtc_state(state, > > new_plane_state->crtc); > > - if (pdpu->pipe != SSPP_NONE) { > > - pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); > > - r_pipe->sspp = NULL; > > - } > > + pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); > > + r_pipe->sspp = NULL; > > if (!pipe->sspp) > > return -EINVAL; > > @@ -1021,6 +1004,49 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > > r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > > r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { > > + uint32_t max_linewidth = dpu_kms->catalog->caps->max_linewidth; > > + const struct msm_format *fmt; > > + > > + fmt = msm_framebuffer_format(new_plane_state->fb); > > + > > + /* > > + * In parallel multirect case only the half of the usual width > > + * is supported for tiled formats. If we are here, we know that > > + * full width is more than max_linewidth, thus each rect is > > + * wider than allowed. > > + */ > > + if (MSM_FORMAT_IS_UBWC(fmt) && > > + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { > > + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", > > + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > > + return -E2BIG; > > + } > > + > > + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || > > + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || > > + (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && > > + !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || > > + pipe_cfg->rotation & DRM_MODE_ROTATE_90 || > > + MSM_FORMAT_IS_YUV(fmt)) { > > + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", > > + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); > > + return -E2BIG; > > + } > > Dont the above two conditions translate to > !dpu_plane_is_multirect_parallel_capable()? Good idea, I'll change that. > > I think once we have a unified plane atomic check and not a separate one for > virtual planes (we had to add one to support the modparam), some duplication > will go away but till then I think this is the best we can do. > > > > + > > + /* > > + * Use multirect for wide plane. We do not support dynamic > > + * assignment of SSPPs, so we know the configuration. > > + */ > > + r_pipe->sspp = pipe->sspp; > > + > > + pipe->multirect_index = DPU_SSPP_RECT_0; > > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > + > > + r_pipe->multirect_index = DPU_SSPP_RECT_1; > > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > + } > > + > > return dpu_plane_atomic_check_sspp(plane, state, crtc_state); > > } > > @@ -1054,8 +1080,16 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane, > > return 0; > > } > > - /* force resource reallocation if the format of FB has changed */ > > + /* > > + * Force resource reallocation if the format of FB or src/dst have > > + * changed. We might need to allocate different SSPP or SSPPs for this > > + * plane than the one used previously. > > + */ > > if (!old_plane_state || !old_plane_state->fb || > > + old_plane_state->src_w != plane_state->src_w || > > + old_plane_state->src_h != plane_state->src_h || > > + old_plane_state->src_w != plane_state->src_w || > > + old_plane_state->crtc_h != plane_state->crtc_h || > > msm_framebuffer_format(old_plane_state->fb) != > > msm_framebuffer_format(plane_state->fb)) > > crtc_state->planes_changed = true; > > @@ -1075,7 +1109,10 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > > struct dpu_plane_state *pstate; > > struct dpu_sw_pipe *pipe; > > struct dpu_sw_pipe *r_pipe; > > + struct dpu_sw_pipe_cfg *pipe_cfg; > > + struct dpu_sw_pipe_cfg *r_pipe_cfg; > > const struct msm_format *fmt; > > + uint32_t max_linewidth; > > if (plane_state->crtc) > > crtc_state = drm_atomic_get_new_crtc_state(state, > > @@ -1084,6 +1121,8 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > > pstate = to_dpu_plane_state(plane_state); > > pipe = &pstate->pipe; > > r_pipe = &pstate->r_pipe; > > + pipe_cfg = &pstate->pipe_cfg; > > + r_pipe_cfg = &pstate->r_pipe_cfg; > > pipe->sspp = NULL; > > r_pipe->sspp = NULL; > > @@ -1098,10 +1137,46 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, > > reqs.rot90 = drm_rotation_90_or_270(plane_state->rotation); > > + max_linewidth = dpu_kms->catalog->caps->max_linewidth; > > + > > pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); > > if (!pipe->sspp) > > return -ENODEV; > > + if (drm_rect_width(&r_pipe_cfg->src_rect) == 0) { > > + pipe->multirect_index = DPU_SSPP_RECT_SOLO; > > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + > > + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + > > + r_pipe->sspp = NULL; > > + } else { > > + if (dpu_plane_is_multirect_parallel_capable(pipe, pipe_cfg, fmt, max_linewidth) && > > + dpu_plane_is_multirect_parallel_capable(r_pipe, r_pipe_cfg, fmt, max_linewidth) && > > + (test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) || > > + test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))) { > > + r_pipe->sspp = pipe->sspp; > > + > > + pipe->multirect_index = DPU_SSPP_RECT_0; > > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > + > > + r_pipe->multirect_index = DPU_SSPP_RECT_1; > > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; > > + } else { > > + /* multirect is not possible, use two SSPP blocks */ > > + r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); > > + if (!r_pipe->sspp) > > + return -ENODEV; > > + > > + pipe->multirect_index = DPU_SSPP_RECT_SOLO; > > + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + > > + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; > > + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; > > + } > > + } > > + > > return dpu_plane_atomic_check_sspp(plane, state, crtc_state); > > } > >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index 125db3803cf5..ad6cc469f475 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -20,7 +20,6 @@ #include "msm_drv.h" #include "msm_mdss.h" #include "dpu_kms.h" -#include "dpu_formats.h" #include "dpu_hw_sspp.h" #include "dpu_hw_util.h" #include "dpu_trace.h" @@ -888,6 +887,28 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane, return 0; } +static int dpu_plane_is_multirect_parallel_capable(struct dpu_sw_pipe *pipe, + struct dpu_sw_pipe_cfg *pipe_cfg, + const struct msm_format *fmt, + uint32_t max_linewidth) +{ + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect)) + return false; + + if (pipe_cfg->rotation & DRM_MODE_ROTATE_90) + return false; + + if (MSM_FORMAT_IS_YUV(fmt)) + return false; + + if (MSM_FORMAT_IS_UBWC(fmt) && + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth / 2) + return false; + + return true; +} + static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, struct drm_atomic_state *state, const struct drm_crtc_state *crtc_state) @@ -901,7 +922,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, const struct msm_format *fmt; struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; - uint32_t max_linewidth; uint32_t supported_rotations; const struct dpu_sspp_cfg *pipe_hw_caps; const struct dpu_sspp_sub_blks *sblk; @@ -923,8 +943,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, fmt = msm_framebuffer_format(new_plane_state->fb); - max_linewidth = pdpu->catalog->caps->max_linewidth; - supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0; if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) @@ -940,41 +958,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane, return ret; if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { - /* - * In parallel multirect case only the half of the usual width - * is supported for tiled formats. If we are here, we know that - * full width is more than max_linewidth, thus each rect is - * wider than allowed. - */ - if (MSM_FORMAT_IS_UBWC(fmt) && - drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); - return -E2BIG; - } - - if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || - drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || - (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && - !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || - pipe_cfg->rotation & DRM_MODE_ROTATE_90 || - MSM_FORMAT_IS_YUV(fmt)) { - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); - return -E2BIG; - } - - /* - * Use multirect for wide plane. We do not support dynamic - * assignment of SSPPs, so we know the configuration. - */ - pipe->multirect_index = DPU_SSPP_RECT_0; - pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; - - r_pipe->sspp = pipe->sspp; - r_pipe->multirect_index = DPU_SSPP_RECT_1; - r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; - ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt, &crtc_state->adjusted_mode); if (ret) @@ -995,16 +978,16 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane); struct dpu_sw_pipe *pipe = &pstate->pipe; struct dpu_sw_pipe *r_pipe = &pstate->r_pipe; + struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; + struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; const struct drm_crtc_state *crtc_state = NULL; if (new_plane_state->crtc) crtc_state = drm_atomic_get_new_crtc_state(state, new_plane_state->crtc); - if (pdpu->pipe != SSPP_NONE) { - pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); - r_pipe->sspp = NULL; - } + pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe); + r_pipe->sspp = NULL; if (!pipe->sspp) return -EINVAL; @@ -1021,6 +1004,49 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; + if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) { + uint32_t max_linewidth = dpu_kms->catalog->caps->max_linewidth; + const struct msm_format *fmt; + + fmt = msm_framebuffer_format(new_plane_state->fb); + + /* + * In parallel multirect case only the half of the usual width + * is supported for tiled formats. If we are here, we know that + * full width is more than max_linewidth, thus each rect is + * wider than allowed. + */ + if (MSM_FORMAT_IS_UBWC(fmt) && + drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) { + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n", + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); + return -E2BIG; + } + + if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) || + drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) || + (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) && + !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) || + pipe_cfg->rotation & DRM_MODE_ROTATE_90 || + MSM_FORMAT_IS_YUV(fmt)) { + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n", + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth); + return -E2BIG; + } + + /* + * Use multirect for wide plane. We do not support dynamic + * assignment of SSPPs, so we know the configuration. + */ + r_pipe->sspp = pipe->sspp; + + pipe->multirect_index = DPU_SSPP_RECT_0; + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; + + r_pipe->multirect_index = DPU_SSPP_RECT_1; + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; + } + return dpu_plane_atomic_check_sspp(plane, state, crtc_state); } @@ -1054,8 +1080,16 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane, return 0; } - /* force resource reallocation if the format of FB has changed */ + /* + * Force resource reallocation if the format of FB or src/dst have + * changed. We might need to allocate different SSPP or SSPPs for this + * plane than the one used previously. + */ if (!old_plane_state || !old_plane_state->fb || + old_plane_state->src_w != plane_state->src_w || + old_plane_state->src_h != plane_state->src_h || + old_plane_state->src_w != plane_state->src_w || + old_plane_state->crtc_h != plane_state->crtc_h || msm_framebuffer_format(old_plane_state->fb) != msm_framebuffer_format(plane_state->fb)) crtc_state->planes_changed = true; @@ -1075,7 +1109,10 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, struct dpu_plane_state *pstate; struct dpu_sw_pipe *pipe; struct dpu_sw_pipe *r_pipe; + struct dpu_sw_pipe_cfg *pipe_cfg; + struct dpu_sw_pipe_cfg *r_pipe_cfg; const struct msm_format *fmt; + uint32_t max_linewidth; if (plane_state->crtc) crtc_state = drm_atomic_get_new_crtc_state(state, @@ -1084,6 +1121,8 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, pstate = to_dpu_plane_state(plane_state); pipe = &pstate->pipe; r_pipe = &pstate->r_pipe; + pipe_cfg = &pstate->pipe_cfg; + r_pipe_cfg = &pstate->r_pipe_cfg; pipe->sspp = NULL; r_pipe->sspp = NULL; @@ -1098,10 +1137,46 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc, reqs.rot90 = drm_rotation_90_or_270(plane_state->rotation); + max_linewidth = dpu_kms->catalog->caps->max_linewidth; + pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); if (!pipe->sspp) return -ENODEV; + if (drm_rect_width(&r_pipe_cfg->src_rect) == 0) { + pipe->multirect_index = DPU_SSPP_RECT_SOLO; + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; + + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; + + r_pipe->sspp = NULL; + } else { + if (dpu_plane_is_multirect_parallel_capable(pipe, pipe_cfg, fmt, max_linewidth) && + dpu_plane_is_multirect_parallel_capable(r_pipe, r_pipe_cfg, fmt, max_linewidth) && + (test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) || + test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))) { + r_pipe->sspp = pipe->sspp; + + pipe->multirect_index = DPU_SSPP_RECT_0; + pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; + + r_pipe->multirect_index = DPU_SSPP_RECT_1; + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL; + } else { + /* multirect is not possible, use two SSPP blocks */ + r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs); + if (!r_pipe->sspp) + return -ENODEV; + + pipe->multirect_index = DPU_SSPP_RECT_SOLO; + pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; + + r_pipe->multirect_index = DPU_SSPP_RECT_SOLO; + r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE; + } + } + return dpu_plane_atomic_check_sspp(plane, state, crtc_state); }
Virtual wide planes give high amount of flexibility, but it is not always enough: In parallel multirect case only the half of the usual width is supported for tiled formats. Thus the whole width of two tiled multirect rectangles can not be greater than max_linewidth, which is not enough for some platforms/compositors. Another example is as simple as wide YUV plane. YUV planes can not use multirect, so currently they are limited to max_linewidth too. Now that the planes are fully virtualized, add support for allocating two SSPP blocks to drive a single DRM plane. This fixes both mentioned cases and allows all planes to go up to 2*max_linewidth (at the cost of making some of the planes unavailable to the user). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 163 ++++++++++++++++++++++-------- 1 file changed, 119 insertions(+), 44 deletions(-)