| Message ID | 20241023-en7581-pinctrl-v9-6-afb0cbcab0ec@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add mfd, pinctrl and pwm support to EN7581 SoC | expand |
Hello, On Wed, Oct 23, 2024 at 01:20:06AM +0200, Lorenzo Bianconi wrote: > From: Benjamin Larsson <benjamin.larsson@genexis.eu> > > Introduce driver for PWM module available on EN7581 SoC. > > Signed-off-by: Benjamin Larsson <benjamin.larsson@genexis.eu> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > --- > drivers/pwm/Kconfig | 11 ++ > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-airoha.c | 386 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 398 insertions(+) > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig > index 0915c1e7df16d451e987dcc5f10e0b57edc32ee1..99aa87136c272555c10102590fcf9f911161c3d3 100644 > --- a/drivers/pwm/Kconfig > +++ b/drivers/pwm/Kconfig > @@ -54,6 +54,17 @@ config PWM_ADP5585 > This option enables support for the PWM function found in the Analog > Devices ADP5585. > > +config PWM_AIROHA > + tristate "Airoha PWM support" > + depends on ARCH_AIROHA || COMPILE_TEST > + depends on OF > + select REGMAP_MMIO > + help > + Generic PWM framework driver for Airoha SoC. > + > + To compile this driver as a module, choose M here: the module > + will be called pwm-airoha. > + > config PWM_APPLE > tristate "Apple SoC PWM support" > depends on ARCH_APPLE || COMPILE_TEST > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile > index 9081e0c0e9e09713fe05479c257eebe5f02b91e9..fbf7723d845807fd1e2893c6ea4f736785841b0d 100644 > --- a/drivers/pwm/Makefile > +++ b/drivers/pwm/Makefile > @@ -2,6 +2,7 @@ > obj-$(CONFIG_PWM) += core.o > obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o > obj-$(CONFIG_PWM_ADP5585) += pwm-adp5585.o > +obj-$(CONFIG_PWM_AIROHA) += pwm-airoha.o > obj-$(CONFIG_PWM_APPLE) += pwm-apple.o > obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o > obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o > diff --git a/drivers/pwm/pwm-airoha.c b/drivers/pwm/pwm-airoha.c > new file mode 100644 > index 0000000000000000000000000000000000000000..658884852e7ad7a76ff499879eda9c50dfc5f745 > --- /dev/null > +++ b/drivers/pwm/pwm-airoha.c > @@ -0,0 +1,386 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2022 Markus Gothe <markus.gothe@genexis.eu> > + * > + * Limitations: > + * - No disable bit, so a disabled PWM is simulated by setting duty_cycle to 0 > + * - Only 8 concurrent waveform generators are available for 8 combinations of > + * duty_cycle and period. Waveform generators are shared between 16 GPIO > + * pins and 17 SIPO GPIO pins. > + * - Supports only normal polarity. > + * - On configuration the currently running period is completed. Maybe I already asked before: Is there a public manual? If so, please add a link here. > + */ > + > +#include <linux/bitfield.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/iopoll.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/pwm.h> > +#include <linux/gpio.h> > +#include <linux/bitops.h> > +#include <linux/regmap.h> > +#include <asm/div64.h> > + > +#define REG_SGPIO_LED_DATA 0x0024 > +#define SGPIO_LED_DATA_SHIFT_FLAG BIT(31) > +#define SGPIO_LED_DATA_DATA GENMASK(16, 0) > + > +#define REG_SGPIO_CLK_DIVR 0x0028 > +#define REG_SGPIO_CLK_DIVR_MASK GENMASK(1, 0) > +#define REG_SGPIO_CLK_DLY 0x002c > + > +#define REG_SIPO_FLASH_MODE_CFG 0x0030 > +#define SERIAL_GPIO_FLASH_MODE BIT(1) > +#define SERIAL_GPIO_MODE_74HC164 BIT(0) > + > +#define REG_GPIO_FLASH_PRD_SET(_n) (0x003c + ((_n) << 2)) > +#define GPIO_FLASH_PRD_MASK(_n) GENMASK(15 + ((_n) << 4), ((_n) << 4)) > + > +#define REG_GPIO_FLASH_MAP(_n) (0x004c + ((_n) << 2)) > +#define GPIO_FLASH_SETID_MASK(_n) GENMASK(2 + ((_n) << 2), ((_n) << 2)) > +#define GPIO_FLASH_EN(_n) BIT(3 + ((_n) << 2)) > + > +#define REG_SIPO_FLASH_MAP(_n) (0x0054 + ((_n) << 2)) > + > +#define REG_CYCLE_CFG_VALUE(_n) (0x0098 + ((_n) << 2)) > +#define WAVE_GEN_CYCLE_MASK(_n) GENMASK(7 + ((_n) << 3), ((_n) << 3)) > + > +#define PWM_NUM_BUCKETS 8 > + > +struct airoha_pwm_bucket { > + /* Bitmask of PWM channels using this bucket */ > + u64 used; > + u64 period_ns; > + u64 duty_ns; > +}; > + > +struct airoha_pwm { > + struct regmap *regmap; > + > + struct device_node *np; > + u64 initialized; > + > + struct airoha_pwm_bucket bucket[PWM_NUM_BUCKETS]; > +}; > + > +/* > + * The first 16 GPIO pins, GPIO0-GPIO15, are mapped into 16 PWM channels, 0-15. > + * The SIPO GPIO pins are 17 pins which are mapped into 17 PWM channels, 16-32. > + * However, we've only got 8 concurrent waveform generators and can therefore > + * only use up to 8 different combinations of duty cycle and period at a time. > + */ > +#define PWM_NUM_GPIO 16 > +#define PWM_NUM_SIPO 17 > + > +/* The PWM hardware supports periods between 4 ms and 1 s */ > +#define PERIOD_MIN_NS (4 * NSEC_PER_MSEC) > +#define PERIOD_MAX_NS (1 * NSEC_PER_SEC) > +/* It is represented internally as 1/250 s between 1 and 250 */ > +#define PERIOD_MIN 1 > +#define PERIOD_MAX 250 > +/* Duty cycle is relative with 255 corresponding to 100% */ > +#define DUTY_FULL 255 Please add proper namespacing to these constants, some of these make a more generic impression than justified. (i.e. add a common prefix like "AIROHA_PWM_") > +static int airoha_pwm_get_generator(struct airoha_pwm *pc, u64 duty_ns, > + u64 period_ns) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { > + if (!pc->bucket[i].used) > + continue; > + > + if (duty_ns == pc->bucket[i].duty_ns && > + period_ns == pc->bucket[i].period_ns) > + return i; > + > + /* > + * Unlike duty cycle zero, which can be handled by > + * disabling PWM, a generator is needed for full duty > + * cycle but it can be reused regardless of period > + */ > + if (duty_ns == DUTY_FULL && pc->bucket[i].duty_ns == DUTY_FULL) I wonder: The PWM supports periods starting at 4ms, but 255 is the maximal value for duty_ns? Isn't that a misnomer and is about duty_ticks? > + return i; > + } > + > + return -1; > +} > + > +static void airoha_pwm_release_bucket_config(struct airoha_pwm *pc, > + unsigned int hwpwm) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) > + pc->bucket[i].used &= ~BIT_ULL(hwpwm); > +} > + > +static int airoha_pwm_consume_generator(struct airoha_pwm *pc, > + u64 duty_ns, u64 period_ns, > + unsigned int hwpwm) > +{ > + int id = airoha_pwm_get_generator(pc, duty_ns, period_ns); > + > + if (id < 0) { > + int i; > + > + /* find an unused waveform generator */ > + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { > + if (!(pc->bucket[i].used & ~BIT_ULL(hwpwm))) { > + id = i; > + break; > + } > + } > + } I think airoha_pwm_get_generator could return an unused generator, then you don't need to loop twice over all buckets. Just an idea, not sure this becomes considerably faster or easier to understand. > + if (id >= 0) { > + airoha_pwm_release_bucket_config(pc, hwpwm); > + pc->bucket[id].used |= BIT_ULL(hwpwm); > + pc->bucket[id].period_ns = period_ns; > + pc->bucket[id].duty_ns = duty_ns; > + } > + > + return id; > +} > + > +static int airoha_pwm_sipo_init(struct airoha_pwm *pc) > +{ > + u32 val; > + > + if (!(pc->initialized >> PWM_NUM_GPIO)) > + return 0; > + > + regmap_clear_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, > + SERIAL_GPIO_MODE_74HC164); > + > + /* Configure shift register timings, use 32x divisor */ > + regmap_write(pc->regmap, REG_SGPIO_CLK_DIVR, > + FIELD_PREP(REG_SGPIO_CLK_DIVR_MASK, 0x3)); > + > + /* > + * The actual delay is clock + 1. > + * Notice that clock delay should not be greater > + * than (divisor / 2) - 1. > + * Set to 0 by default. (aka 1) > + */ > + regmap_write(pc->regmap, REG_SGPIO_CLK_DLY, 0x0); > + > + /* > + * It it necessary to after muxing explicitly shift out all > + * zeroes to initialize the shift register before enabling PWM > + * mode because in PWM mode SIPO will not start shifting until > + * it needs to output a non-zero value (bit 31 of led_data > + * indicates shifting in progress and it must return to zero > + * before led_data can be written or PWM mode can be set) > + */ > + if (regmap_read_poll_timeout(pc->regmap, REG_SGPIO_LED_DATA, val, > + !(val & SGPIO_LED_DATA_SHIFT_FLAG), 10, > + 200 * USEC_PER_MSEC)) > + return -ETIMEDOUT; > + > + regmap_clear_bits(pc->regmap, REG_SGPIO_LED_DATA, SGPIO_LED_DATA_DATA); > + if (regmap_read_poll_timeout(pc->regmap, REG_SGPIO_LED_DATA, val, > + !(val & SGPIO_LED_DATA_SHIFT_FLAG), 10, > + 200 * USEC_PER_MSEC)) > + return -ETIMEDOUT; > + > + /* Set SIPO in PWM mode */ > + regmap_set_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, > + SERIAL_GPIO_FLASH_MODE); > + > + return 0; > +} > + > +static void airoha_pwm_calc_bucket_config(struct airoha_pwm *pc, int index, > + u64 duty_ns, u64 period_ns) > +{ > + u32 period, duty, mask, val; Please use duty_ns for values in nanoseconds and duty_ticks (or something similar) for values in clock ticks consistently. > + u64 tmp; > + > + tmp = duty_ns * DUTY_FULL; This might overflow. => Use mul_u64_u64_div_u64() or a suitable cousin of it. > + duty = clamp_val(div64_u64(tmp, period_ns), 0, DUTY_FULL); > + tmp = period_ns * 25; > + period = clamp_val(div64_u64(tmp, 100000000), PERIOD_MIN, PERIOD_MAX); Huh, we already know that period_ns >= PERIOD_MIN_NS = 4000000, so period is >= PERIOD_MIN = 1 already. So the lower bound part of that clamping is not needed. (And it looks wrong because you're not supposed to round up.) Ditto for the duty_clamp, tmp/period_ns will never be less than 0. > + /* Configure frequency divisor */ > + mask = WAVE_GEN_CYCLE_MASK(index % 4); > + val = (period << __ffs(mask)) & mask; FIELD_PREP please. > + regmap_update_bits(pc->regmap, REG_CYCLE_CFG_VALUE(index / 4), > + mask, val); > + > + /* Configure duty cycle */ > + duty = ((DUTY_FULL - duty) << 8) | duty; Please use proper defines for the bit fields and then use FIELD_PREP here instead of shifts with an explicit number as RHS. > + mask = GPIO_FLASH_PRD_MASK(index % 2); > + val = (duty << __ffs(mask)) & mask; > + regmap_update_bits(pc->regmap, REG_GPIO_FLASH_PRD_SET(index / 2), > + mask, val); > +} > + > +static void airoha_pwm_config_flash_map(struct airoha_pwm *pc, > + unsigned int hwpwm, int index) > +{ > + u32 addr, mask, val; > + > + if (hwpwm < PWM_NUM_GPIO) { > + addr = REG_GPIO_FLASH_MAP(hwpwm / 8); > + } else { > + addr = REG_SIPO_FLASH_MAP(hwpwm / 8); > + hwpwm -= PWM_NUM_GPIO; > + } > + > + if (index < 0) { > + /* > + * Change of waveform takes effect immediately but > + * disabling has some delay so to prevent glitching > + * only the enable bit is touched when disabling Together with "No disable bit, so a disabled PWM is simulated by setting duty_cycle to 0" from the Limitations paragraph above I don't understand that. And if disabling has some delay but reconfiguration doesn't, it would give a more consistent behaviour to configure a duty_cycle = 0 here? > + */ > + regmap_clear_bits(pc->regmap, addr, GPIO_FLASH_EN(hwpwm % 8)); > + return; > + } > + > + mask = GPIO_FLASH_SETID_MASK(hwpwm % 8); > + val = ((index & 7) << __ffs(mask)) & mask; > + regmap_update_bits(pc->regmap, addr, mask, val); > + regmap_set_bits(pc->regmap, addr, GPIO_FLASH_EN(hwpwm % 8)); > +} > + > +static int airoha_pwm_config(struct airoha_pwm *pc, struct pwm_device *pwm, > + u64 duty_ns, u64 period_ns) > +{ > + int index = -1; This initialisation isn't needed. > + index = airoha_pwm_consume_generator(pc, duty_ns, period_ns, > + pwm->hwpwm); > + if (index < 0) > + return -EBUSY; > + > + if (!(pc->initialized & BIT_ULL(pwm->hwpwm)) && > + pwm->hwpwm >= PWM_NUM_GPIO) > + airoha_pwm_sipo_init(pc); > + > + if (index >= 0) { After the return above index >= 0 is always true. > + airoha_pwm_calc_bucket_config(pc, index, duty_ns, period_ns); > + airoha_pwm_config_flash_map(pc, pwm->hwpwm, index); > + } else { > + airoha_pwm_config_flash_map(pc, pwm->hwpwm, index); > + airoha_pwm_release_bucket_config(pc, pwm->hwpwm); > + } > + > + pc->initialized |= BIT_ULL(pwm->hwpwm); > + > + return 0; > +} > + > +static void airoha_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) > +{ > + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); > + > + /* Disable PWM and release the waveform */ s/waveform/bucket/ ? > + airoha_pwm_config_flash_map(pc, pwm->hwpwm, -1); > + airoha_pwm_release_bucket_config(pc, pwm->hwpwm); > + > + pc->initialized &= ~BIT_ULL(pwm->hwpwm); > + if (!(pc->initialized >> PWM_NUM_GPIO)) > + regmap_clear_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, > + SERIAL_GPIO_FLASH_MODE); > +} > + > +static int airoha_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, > + const struct pwm_state *state) > +{ > + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); > + u64 duty = state->enabled ? state->duty_cycle : 0; > + u64 period = state->period; > + > + /* Only normal polarity is supported */ > + if (state->polarity == PWM_POLARITY_INVERSED) > + return -EINVAL; > + > + if (!state->enabled) { > + airoha_pwm_disable(chip, pwm); > + return 0; > + } > + > + if (period < PERIOD_MIN_NS) > + return -EINVAL; > + > + if (period > PERIOD_MAX_NS) > + period = PERIOD_MAX_NS; If you ask me, don't check the nanosecond values, but convert them to ticks and check only then. That feels more natural. > + return airoha_pwm_config(pc, pwm, duty, period); > +} > + > +static int airoha_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, > + struct pwm_state *state) > +{ > + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); > + int i; > + > + /* find hwpwm in waveform generator bucket */ > + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { > + if (pc->bucket[i].used & BIT_ULL(pwm->hwpwm)) { > + state->enabled = pc->initialized & BIT_ULL(pwm->hwpwm); > + state->polarity = PWM_POLARITY_NORMAL; > + state->period = pc->bucket[i].period_ns; > + state->duty_cycle = pc->bucket[i].duty_ns; > + break; > + } > + } Is it worth to maintain the information about index of the used bucket for a given pwm_device in airoha_pwm to save a few loops? > + if (i == ARRAY_SIZE(pc->bucket)) > + state->enabled = false; > + > + return 0; > +} > + > +static const struct pwm_ops airoha_pwm_ops = { > + .get_state = airoha_pwm_get_state, > + .apply = airoha_pwm_apply, I'm a big fan of consistency, so you can make me a bit more happy if you define airoha_pwm_get_state() before airoha_pwm_apply() or switch the order here. (The latter is slightly preferred as this matches the order of their definition in struct pwm_ops.) > +}; > + > +static int airoha_pwm_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct airoha_pwm *pc; > + struct pwm_chip *chip; > + > + chip = devm_pwmchip_alloc(dev, PWM_NUM_GPIO + PWM_NUM_SIPO, > + sizeof(*pc)); > + if (IS_ERR(chip)) > + return PTR_ERR(chip); > + > + chip->ops = &airoha_pwm_ops; > + pc = pwmchip_get_drvdata(chip); > + pc->np = dev->of_node; .np is a write only struct member and so can be dropped. > + > + pc->regmap = device_node_to_regmap(dev->parent->of_node); > + if (IS_ERR(pc->regmap)) > + return PTR_ERR(pc->regmap); > + > + return devm_pwmchip_add(&pdev->dev, chip); Please add error messages to .probe() using dev_err_probe(). > +} Best regards Uwe
Hi. On 2024-10-30 08:32, Uwe Kleine-König wrote: > >> + * Limitations: >> + * - No disable bit, so a disabled PWM is simulated by setting duty_cycle to 0 >> + * - Only 8 concurrent waveform generators are available for 8 combinations of >> + * duty_cycle and period. Waveform generators are shared between 16 GPIO >> + * pins and 17 SIPO GPIO pins. >> + * - Supports only normal polarity. >> + * - On configuration the currently running period is completed. > Maybe I already asked before: Is there a public manual? If so, please > add a link here. Currently there is no public manual for this. And the existing manual is not that detailed. > >> + /* Configure frequency divisor */ >> + mask = WAVE_GEN_CYCLE_MASK(index % 4); >> + val = (period << __ffs(mask)) & mask; > FIELD_PREP please. Per my understanding FIELD_PREP only work on compile time constants. MvH Benjamin Larsson
Hello Benjamin, On Wed, Oct 30, 2024 at 11:14:41AM +0100, Benjamin Larsson wrote: > On 2024-10-30 08:32, Uwe Kleine-König wrote: > > > + /* Configure frequency divisor */ > > > + mask = WAVE_GEN_CYCLE_MASK(index % 4); > > > + val = (period << __ffs(mask)) & mask; > > FIELD_PREP please. > > Per my understanding FIELD_PREP only work on compile time constants. Then please create an alternative macro with the same semantic that also works when the mask isn't known at compile time instead of open coding the same concept several times. Best regards Uwe
On 31/10/2024 11:53, Uwe Kleine-König wrote: > Hello Benjamin, > > On Wed, Oct 30, 2024 at 11:14:41AM +0100, Benjamin Larsson wrote: >> On 2024-10-30 08:32, Uwe Kleine-König wrote: >>>> + /* Configure frequency divisor */ >>>> + mask = WAVE_GEN_CYCLE_MASK(index % 4); >>>> + val = (period << __ffs(mask)) & mask; >>> FIELD_PREP please. >> Per my understanding FIELD_PREP only work on compile time constants. > Then please create an alternative macro with the same semantic that also > works when the mask isn't known at compile time instead of open coding > the same concept several times. > > Best regards > Uwe Hi, someone did but the code never got merged. https://lkml.org/lkml/2021/11/22/532 So the current way of doing it seems to be to open coding. Are you proposing macros like these are added? #define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1)) #define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask)) MvH Benjamin Larsson
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 0915c1e7df16d451e987dcc5f10e0b57edc32ee1..99aa87136c272555c10102590fcf9f911161c3d3 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -54,6 +54,17 @@ config PWM_ADP5585 This option enables support for the PWM function found in the Analog Devices ADP5585. +config PWM_AIROHA + tristate "Airoha PWM support" + depends on ARCH_AIROHA || COMPILE_TEST + depends on OF + select REGMAP_MMIO + help + Generic PWM framework driver for Airoha SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-airoha. + config PWM_APPLE tristate "Apple SoC PWM support" depends on ARCH_APPLE || COMPILE_TEST diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 9081e0c0e9e09713fe05479c257eebe5f02b91e9..fbf7723d845807fd1e2893c6ea4f736785841b0d 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_ADP5585) += pwm-adp5585.o +obj-$(CONFIG_PWM_AIROHA) += pwm-airoha.o obj-$(CONFIG_PWM_APPLE) += pwm-apple.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o diff --git a/drivers/pwm/pwm-airoha.c b/drivers/pwm/pwm-airoha.c new file mode 100644 index 0000000000000000000000000000000000000000..658884852e7ad7a76ff499879eda9c50dfc5f745 --- /dev/null +++ b/drivers/pwm/pwm-airoha.c @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 Markus Gothe <markus.gothe@genexis.eu> + * + * Limitations: + * - No disable bit, so a disabled PWM is simulated by setting duty_cycle to 0 + * - Only 8 concurrent waveform generators are available for 8 combinations of + * duty_cycle and period. Waveform generators are shared between 16 GPIO + * pins and 17 SIPO GPIO pins. + * - Supports only normal polarity. + * - On configuration the currently running period is completed. + */ + +#include <linux/bitfield.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/gpio.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <asm/div64.h> + +#define REG_SGPIO_LED_DATA 0x0024 +#define SGPIO_LED_DATA_SHIFT_FLAG BIT(31) +#define SGPIO_LED_DATA_DATA GENMASK(16, 0) + +#define REG_SGPIO_CLK_DIVR 0x0028 +#define REG_SGPIO_CLK_DIVR_MASK GENMASK(1, 0) +#define REG_SGPIO_CLK_DLY 0x002c + +#define REG_SIPO_FLASH_MODE_CFG 0x0030 +#define SERIAL_GPIO_FLASH_MODE BIT(1) +#define SERIAL_GPIO_MODE_74HC164 BIT(0) + +#define REG_GPIO_FLASH_PRD_SET(_n) (0x003c + ((_n) << 2)) +#define GPIO_FLASH_PRD_MASK(_n) GENMASK(15 + ((_n) << 4), ((_n) << 4)) + +#define REG_GPIO_FLASH_MAP(_n) (0x004c + ((_n) << 2)) +#define GPIO_FLASH_SETID_MASK(_n) GENMASK(2 + ((_n) << 2), ((_n) << 2)) +#define GPIO_FLASH_EN(_n) BIT(3 + ((_n) << 2)) + +#define REG_SIPO_FLASH_MAP(_n) (0x0054 + ((_n) << 2)) + +#define REG_CYCLE_CFG_VALUE(_n) (0x0098 + ((_n) << 2)) +#define WAVE_GEN_CYCLE_MASK(_n) GENMASK(7 + ((_n) << 3), ((_n) << 3)) + +#define PWM_NUM_BUCKETS 8 + +struct airoha_pwm_bucket { + /* Bitmask of PWM channels using this bucket */ + u64 used; + u64 period_ns; + u64 duty_ns; +}; + +struct airoha_pwm { + struct regmap *regmap; + + struct device_node *np; + u64 initialized; + + struct airoha_pwm_bucket bucket[PWM_NUM_BUCKETS]; +}; + +/* + * The first 16 GPIO pins, GPIO0-GPIO15, are mapped into 16 PWM channels, 0-15. + * The SIPO GPIO pins are 17 pins which are mapped into 17 PWM channels, 16-32. + * However, we've only got 8 concurrent waveform generators and can therefore + * only use up to 8 different combinations of duty cycle and period at a time. + */ +#define PWM_NUM_GPIO 16 +#define PWM_NUM_SIPO 17 + +/* The PWM hardware supports periods between 4 ms and 1 s */ +#define PERIOD_MIN_NS (4 * NSEC_PER_MSEC) +#define PERIOD_MAX_NS (1 * NSEC_PER_SEC) +/* It is represented internally as 1/250 s between 1 and 250 */ +#define PERIOD_MIN 1 +#define PERIOD_MAX 250 +/* Duty cycle is relative with 255 corresponding to 100% */ +#define DUTY_FULL 255 + +static int airoha_pwm_get_generator(struct airoha_pwm *pc, u64 duty_ns, + u64 period_ns) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { + if (!pc->bucket[i].used) + continue; + + if (duty_ns == pc->bucket[i].duty_ns && + period_ns == pc->bucket[i].period_ns) + return i; + + /* + * Unlike duty cycle zero, which can be handled by + * disabling PWM, a generator is needed for full duty + * cycle but it can be reused regardless of period + */ + if (duty_ns == DUTY_FULL && pc->bucket[i].duty_ns == DUTY_FULL) + return i; + } + + return -1; +} + +static void airoha_pwm_release_bucket_config(struct airoha_pwm *pc, + unsigned int hwpwm) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) + pc->bucket[i].used &= ~BIT_ULL(hwpwm); +} + +static int airoha_pwm_consume_generator(struct airoha_pwm *pc, + u64 duty_ns, u64 period_ns, + unsigned int hwpwm) +{ + int id = airoha_pwm_get_generator(pc, duty_ns, period_ns); + + if (id < 0) { + int i; + + /* find an unused waveform generator */ + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { + if (!(pc->bucket[i].used & ~BIT_ULL(hwpwm))) { + id = i; + break; + } + } + } + + if (id >= 0) { + airoha_pwm_release_bucket_config(pc, hwpwm); + pc->bucket[id].used |= BIT_ULL(hwpwm); + pc->bucket[id].period_ns = period_ns; + pc->bucket[id].duty_ns = duty_ns; + } + + return id; +} + +static int airoha_pwm_sipo_init(struct airoha_pwm *pc) +{ + u32 val; + + if (!(pc->initialized >> PWM_NUM_GPIO)) + return 0; + + regmap_clear_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, + SERIAL_GPIO_MODE_74HC164); + + /* Configure shift register timings, use 32x divisor */ + regmap_write(pc->regmap, REG_SGPIO_CLK_DIVR, + FIELD_PREP(REG_SGPIO_CLK_DIVR_MASK, 0x3)); + + /* + * The actual delay is clock + 1. + * Notice that clock delay should not be greater + * than (divisor / 2) - 1. + * Set to 0 by default. (aka 1) + */ + regmap_write(pc->regmap, REG_SGPIO_CLK_DLY, 0x0); + + /* + * It it necessary to after muxing explicitly shift out all + * zeroes to initialize the shift register before enabling PWM + * mode because in PWM mode SIPO will not start shifting until + * it needs to output a non-zero value (bit 31 of led_data + * indicates shifting in progress and it must return to zero + * before led_data can be written or PWM mode can be set) + */ + if (regmap_read_poll_timeout(pc->regmap, REG_SGPIO_LED_DATA, val, + !(val & SGPIO_LED_DATA_SHIFT_FLAG), 10, + 200 * USEC_PER_MSEC)) + return -ETIMEDOUT; + + regmap_clear_bits(pc->regmap, REG_SGPIO_LED_DATA, SGPIO_LED_DATA_DATA); + if (regmap_read_poll_timeout(pc->regmap, REG_SGPIO_LED_DATA, val, + !(val & SGPIO_LED_DATA_SHIFT_FLAG), 10, + 200 * USEC_PER_MSEC)) + return -ETIMEDOUT; + + /* Set SIPO in PWM mode */ + regmap_set_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, + SERIAL_GPIO_FLASH_MODE); + + return 0; +} + +static void airoha_pwm_calc_bucket_config(struct airoha_pwm *pc, int index, + u64 duty_ns, u64 period_ns) +{ + u32 period, duty, mask, val; + u64 tmp; + + tmp = duty_ns * DUTY_FULL; + duty = clamp_val(div64_u64(tmp, period_ns), 0, DUTY_FULL); + tmp = period_ns * 25; + period = clamp_val(div64_u64(tmp, 100000000), PERIOD_MIN, PERIOD_MAX); + + /* Configure frequency divisor */ + mask = WAVE_GEN_CYCLE_MASK(index % 4); + val = (period << __ffs(mask)) & mask; + regmap_update_bits(pc->regmap, REG_CYCLE_CFG_VALUE(index / 4), + mask, val); + + /* Configure duty cycle */ + duty = ((DUTY_FULL - duty) << 8) | duty; + mask = GPIO_FLASH_PRD_MASK(index % 2); + val = (duty << __ffs(mask)) & mask; + regmap_update_bits(pc->regmap, REG_GPIO_FLASH_PRD_SET(index / 2), + mask, val); +} + +static void airoha_pwm_config_flash_map(struct airoha_pwm *pc, + unsigned int hwpwm, int index) +{ + u32 addr, mask, val; + + if (hwpwm < PWM_NUM_GPIO) { + addr = REG_GPIO_FLASH_MAP(hwpwm / 8); + } else { + addr = REG_SIPO_FLASH_MAP(hwpwm / 8); + hwpwm -= PWM_NUM_GPIO; + } + + if (index < 0) { + /* + * Change of waveform takes effect immediately but + * disabling has some delay so to prevent glitching + * only the enable bit is touched when disabling + */ + regmap_clear_bits(pc->regmap, addr, GPIO_FLASH_EN(hwpwm % 8)); + return; + } + + mask = GPIO_FLASH_SETID_MASK(hwpwm % 8); + val = ((index & 7) << __ffs(mask)) & mask; + regmap_update_bits(pc->regmap, addr, mask, val); + regmap_set_bits(pc->regmap, addr, GPIO_FLASH_EN(hwpwm % 8)); +} + +static int airoha_pwm_config(struct airoha_pwm *pc, struct pwm_device *pwm, + u64 duty_ns, u64 period_ns) +{ + int index = -1; + + index = airoha_pwm_consume_generator(pc, duty_ns, period_ns, + pwm->hwpwm); + if (index < 0) + return -EBUSY; + + if (!(pc->initialized & BIT_ULL(pwm->hwpwm)) && + pwm->hwpwm >= PWM_NUM_GPIO) + airoha_pwm_sipo_init(pc); + + if (index >= 0) { + airoha_pwm_calc_bucket_config(pc, index, duty_ns, period_ns); + airoha_pwm_config_flash_map(pc, pwm->hwpwm, index); + } else { + airoha_pwm_config_flash_map(pc, pwm->hwpwm, index); + airoha_pwm_release_bucket_config(pc, pwm->hwpwm); + } + + pc->initialized |= BIT_ULL(pwm->hwpwm); + + return 0; +} + +static void airoha_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); + + /* Disable PWM and release the waveform */ + airoha_pwm_config_flash_map(pc, pwm->hwpwm, -1); + airoha_pwm_release_bucket_config(pc, pwm->hwpwm); + + pc->initialized &= ~BIT_ULL(pwm->hwpwm); + if (!(pc->initialized >> PWM_NUM_GPIO)) + regmap_clear_bits(pc->regmap, REG_SIPO_FLASH_MODE_CFG, + SERIAL_GPIO_FLASH_MODE); +} + +static int airoha_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + const struct pwm_state *state) +{ + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); + u64 duty = state->enabled ? state->duty_cycle : 0; + u64 period = state->period; + + /* Only normal polarity is supported */ + if (state->polarity == PWM_POLARITY_INVERSED) + return -EINVAL; + + if (!state->enabled) { + airoha_pwm_disable(chip, pwm); + return 0; + } + + if (period < PERIOD_MIN_NS) + return -EINVAL; + + if (period > PERIOD_MAX_NS) + period = PERIOD_MAX_NS; + + return airoha_pwm_config(pc, pwm, duty, period); +} + +static int airoha_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct airoha_pwm *pc = pwmchip_get_drvdata(chip); + int i; + + /* find hwpwm in waveform generator bucket */ + for (i = 0; i < ARRAY_SIZE(pc->bucket); i++) { + if (pc->bucket[i].used & BIT_ULL(pwm->hwpwm)) { + state->enabled = pc->initialized & BIT_ULL(pwm->hwpwm); + state->polarity = PWM_POLARITY_NORMAL; + state->period = pc->bucket[i].period_ns; + state->duty_cycle = pc->bucket[i].duty_ns; + break; + } + } + + if (i == ARRAY_SIZE(pc->bucket)) + state->enabled = false; + + return 0; +} + +static const struct pwm_ops airoha_pwm_ops = { + .get_state = airoha_pwm_get_state, + .apply = airoha_pwm_apply, +}; + +static int airoha_pwm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct airoha_pwm *pc; + struct pwm_chip *chip; + + chip = devm_pwmchip_alloc(dev, PWM_NUM_GPIO + PWM_NUM_SIPO, + sizeof(*pc)); + if (IS_ERR(chip)) + return PTR_ERR(chip); + + chip->ops = &airoha_pwm_ops; + pc = pwmchip_get_drvdata(chip); + pc->np = dev->of_node; + + pc->regmap = device_node_to_regmap(dev->parent->of_node); + if (IS_ERR(pc->regmap)) + return PTR_ERR(pc->regmap); + + return devm_pwmchip_add(&pdev->dev, chip); +} + +static const struct of_device_id airoha_pwm_of_match[] = { + { .compatible = "airoha,en7581-pwm" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, airoha_pwm_of_match); + +static struct platform_driver airoha_pwm_driver = { + .driver = { + .name = "pwm-airoha", + .of_match_table = airoha_pwm_of_match, + }, + .probe = airoha_pwm_probe, +}; +module_platform_driver(airoha_pwm_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>"); +MODULE_AUTHOR("Markus Gothe <markus.gothe@genexis.eu>"); +MODULE_AUTHOR("Benjamin Larsson <benjamin.larsson@genexis.eu>"); +MODULE_DESCRIPTION("Airoha EN7581 PWM driver"); +MODULE_LICENSE("GPL");