| Message ID | 20241017001653.178399-4-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | RTL9300 support for reboot and i2c | expand |
On Thu, Oct 17, 2024 at 01:16:50PM +1300, Chris Packham wrote: > Add device tree schema for the Realtek RTL9300 switches. The RTL9300 > family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These > have the same SoC differ in the Ethernet switch/SERDES arrangement. > > Currently the only supported features are the syscon-reboot and i2c > controllers. The syscon-reboot is needed to be able to reboot the board. > The I2C controllers are slightly unusual because they each own an SCL > pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8 > common SDA pins which can be assigned to either controller (but not > both). > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > > Notes: > Changes in v7: > - Set additionalProperties: false > - Remove extraneous examples from i2c binding Thanks for the changes! Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Thu, 17 Oct 2024, Chris Packham wrote: > Add device tree schema for the Realtek RTL9300 switches. The RTL9300 > family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These > have the same SoC differ in the Ethernet switch/SERDES arrangement. > > Currently the only supported features are the syscon-reboot and i2c > controllers. The syscon-reboot is needed to be able to reboot the board. > The I2C controllers are slightly unusual because they each own an SCL > pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8 > common SDA pins which can be assigned to either controller (but not > both). > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > > Notes: > Changes in v7: > - Set additionalProperties: false > - Remove extraneous examples from i2c binding > Changes in v6: > - Drop wildcard compatible > - Add specific compatibles for the 4 known SoC variants > - For the i2c part of the binding accept realtek,rtl9301 as a fallback > for the other compatibles > - The overall switches will eventually differ because these will have > different SERDES/port arrangements so they aren't getting the same > fallback treatment > Changes in v5: > I've combined the two series I had in flight so this is the > combination of adding the switch syscon, the reboot and i2c. It makes > the changelog a bit meaningless so I've dropped the earlier > commentary. > > As requested I've put a more complete example in the main > rtl9300-switch.yaml. > > I've kept rtl9300-i2c.yaml separate for now but link to it with a $ref > from rtl9300-switch.yaml to reduce clutter. The example in > rtl9300-i2c.yaml is technically duplicating part of the example from > rtl9300-switch.yaml but I feel it's nice to be able to see the example > next to where the properties are defined. > > .../bindings/i2c/realtek,rtl9301-i2c.yaml | 69 +++++++++++ > .../bindings/mfd/realtek,rtl9301-switch.yaml | 114 ++++++++++++++++++ Can you separate these out so I can apply the MFD part please?
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml new file mode 100644 index 000000000000..eddfd329c67b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/realtek,rtl9301-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL I2C Controller + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + The RTL9300 SoC has two I2C controllers. Each of these has an SCL line (which + if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be + assigned to either I2C controller. + +properties: + compatible: + oneOf: + - items: + - enum: + - realtek,rtl9302b-i2c + - realtek,rtl9302c-i2c + - realtek,rtl9303-i2c + - const: realtek,rtl9301-i2c + - const: realtek,rtl9301-i2c + + reg: + description: Register offset and size this I2C controller. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + '^i2c@[0-7]$': + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + + properties: + reg: + description: The SDA pin associated with the I2C bus. + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c@36c { + compatible = "realtek,rtl9301-i2c"; + reg = <0x36c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml new file mode 100644 index 000000000000..f053303ab1e6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/realtek,rtl9301-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Switch with Internal CPU + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + The RTL9300 is a series of is an Ethernet switches with an integrated CPU. A + number of different peripherals are accessed through a common register block, + represented here as a syscon node. + +properties: + compatible: + items: + - enum: + - realtek,rtl9301-switch + - realtek,rtl9302b-switch + - realtek,rtl9302c-switch + - realtek,rtl9303-switch + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + 'reboot@[0-9a-f]+$': + $ref: /schemas/power/reset/syscon-reboot.yaml# + + 'i2c@[0-9a-f]+$': + $ref: /schemas/i2c/realtek,rtl9301-i2c.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ethernet-switch@1b000000 { + compatible = "realtek,rtl9301-switch", "syscon", "simple-mfd"; + reg = <0x1b000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + reboot@c { + compatible = "syscon-reboot"; + reg = <0x0c 0x4>; + value = <0x01>; + }; + + i2c@36c { + compatible = "realtek,rtl9301-i2c"; + reg = <0x36c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + + i2c@388 { + compatible = "realtek,rtl9301-i2c"; + reg = <0x388 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + }; +
Add device tree schema for the Realtek RTL9300 switches. The RTL9300 family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These have the same SoC differ in the Ethernet switch/SERDES arrangement. Currently the only supported features are the syscon-reboot and i2c controllers. The syscon-reboot is needed to be able to reboot the board. The I2C controllers are slightly unusual because they each own an SCL pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8 common SDA pins which can be assigned to either controller (but not both). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v7: - Set additionalProperties: false - Remove extraneous examples from i2c binding Changes in v6: - Drop wildcard compatible - Add specific compatibles for the 4 known SoC variants - For the i2c part of the binding accept realtek,rtl9301 as a fallback for the other compatibles - The overall switches will eventually differ because these will have different SERDES/port arrangements so they aren't getting the same fallback treatment Changes in v5: I've combined the two series I had in flight so this is the combination of adding the switch syscon, the reboot and i2c. It makes the changelog a bit meaningless so I've dropped the earlier commentary. As requested I've put a more complete example in the main rtl9300-switch.yaml. I've kept rtl9300-i2c.yaml separate for now but link to it with a $ref from rtl9300-switch.yaml to reduce clutter. The example in rtl9300-i2c.yaml is technically duplicating part of the example from rtl9300-switch.yaml but I feel it's nice to be able to see the example next to where the properties are defined. .../bindings/i2c/realtek,rtl9301-i2c.yaml | 69 +++++++++++ .../bindings/mfd/realtek,rtl9301-switch.yaml | 114 ++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml