| Message ID | 20241031080655.3879139-5-hongxing.zhu@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | A bunch of changes to refine i.MX PCIe driver | expand |
On Thu, Oct 31, 2024 at 04:06:49PM +0800, Richard Zhu wrote: > i.MX7D only has one PCIe controller, so controller_id should always be 0. > The previous code is incorrect although yielding the correct result. Fix by > removing IMX7D from the switch case branch. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- You can simple mention previous discussion here. Converience for reviewer, and past previous discission here. "This is just *wrong*. You cannot hardcode the MMIO address in the driver. Even though this code is old, you should fix it instead of building on top of it. - Mani" IMX7D here is wrong athough check IMX8MQ_PCIE2_BASE_ADDR is not good method. Previously try to use 'linux,pci-domain' to replace this check logic. Need more discussion to improve it and keep old compatiblity. Let's fix this code error firstly. Frank > drivers/pci/controller/dwc/pci-imx6.c | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index d21f7d2e79dc..7479d3253f20 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -1344,7 +1344,6 @@ static int imx_pcie_probe(struct platform_device *pdev) > switch (imx_pcie->drvdata->variant) { > case IMX8MQ: > case IMX8MQ_EP: > - case IMX7D: > if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) > imx_pcie->controller_id = 1; > break; > -- > 2.37.1 >
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index d21f7d2e79dc..7479d3253f20 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1344,7 +1344,6 @@ static int imx_pcie_probe(struct platform_device *pdev) switch (imx_pcie->drvdata->variant) { case IMX8MQ: case IMX8MQ_EP: - case IMX7D: if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) imx_pcie->controller_id = 1; break;