diff mbox series

xfs/157: mkfs does not need a specific fssize

Message ID 20241031193552.1171855-1-zlang@kernel.org (mailing list archive)
State Deferred, archived
Headers show
Series xfs/157: mkfs does not need a specific fssize | expand

Commit Message

Zorro Lang Oct. 31, 2024, 7:35 p.m. UTC
The xfs/157 doesn't need to do a "sized" mkfs, the image file is
500MiB, don't need to do _scratch_mkfs_sized with a 500MiB fssize
argument, a general _scratch_mkfs is good enough.

Besides that, if we do:

  MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size

the _scratch_mkfs_sized trys to keep the $fs_size, when mkfs fails
with incompatible $MKFS_OPTIONS options, likes this:

  ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 **
  ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 **

But if we do:

  _scratch_mkfs -L oldlabel

the _scratch_mkfs trys to keep the "-L oldlabel", when mkfs fails
with incompatible $MKFS_OPTIONS options, likes this:

  ** mkfs failed with extra mkfs options added to "-m rmapbt=1" by test 157 **
  ** attempting to mkfs using only test 157 options: -L oldlabel **

that's actually what we need.

Signed-off-by: Zorro Lang <zlang@kernel.org>
---

This test started to fail since 2f7e1b8a6f09 ("xfs/157,xfs/547,xfs/548: switch to
using _scratch_mkfs_sized") was merged.

  FSTYP         -- xfs (non-debug)
  PLATFORM      -- Linux/x86_64
  MKFS_OPTIONS  -- -f -m rmapbt=1 /dev/sda3
  MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/sda3 /mnt/scratch

  xfs/157 7s ... - output mismatch (see /root/git/xfstests/results//xfs/157.out.bad)
      --- tests/xfs/157.out       2024-11-01 01:05:03.664543576 +0800
      +++ /root/git/xfstests/results//xfs/157.out.bad     2024-11-01 02:56:47.994007900 +0800
      @@ -6,10 +6,10 @@
       label = "oldlabel"
       label = "newlabel"
       S3: Check that setting with rtdev works
      -label = "oldlabel"
      +label = ""
       label = "newlabel"
       S4: Check that setting with rtdev + logdev works
      ...
      (Run 'diff -u /root/git/xfstests/tests/xfs/157.out /root/git/xfstests/results//xfs/157.out.bad'  to see the entire diff)
  Ran: xfs/157
  Failures: xfs/157
  Failed 1 of 1 tests

Before that change, the _scratch_mkfs can drop "rmapbt=1" option from $MKFS_OPTIONS,
only keep the "-L label" option. That's why this test never failed before.

Now it fails on xfs, if MKFS_OPTIONS contains "-m rmapbt=1", the reason as I
explained above.

Thanks,
Zorro

 tests/xfs/157 | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Darrick J. Wong Oct. 31, 2024, 10:08 p.m. UTC | #1
On Fri, Nov 01, 2024 at 03:35:52AM +0800, Zorro Lang wrote:
> The xfs/157 doesn't need to do a "sized" mkfs, the image file is
> 500MiB, don't need to do _scratch_mkfs_sized with a 500MiB fssize
> argument, a general _scratch_mkfs is good enough.
> 
> Besides that, if we do:
> 
>   MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size
> 
> the _scratch_mkfs_sized trys to keep the $fs_size, when mkfs fails
> with incompatible $MKFS_OPTIONS options, likes this:
> 
>   ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 **
>   ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 **
> 
> But if we do:
> 
>   _scratch_mkfs -L oldlabel
> 
> the _scratch_mkfs trys to keep the "-L oldlabel", when mkfs fails
> with incompatible $MKFS_OPTIONS options, likes this:
> 
>   ** mkfs failed with extra mkfs options added to "-m rmapbt=1" by test 157 **
>   ** attempting to mkfs using only test 157 options: -L oldlabel **
> 
> that's actually what we need.
> 
> Signed-off-by: Zorro Lang <zlang@kernel.org>
> ---
> 
> This test started to fail since 2f7e1b8a6f09 ("xfs/157,xfs/547,xfs/548: switch to
> using _scratch_mkfs_sized") was merged.
> 
>   FSTYP         -- xfs (non-debug)
>   PLATFORM      -- Linux/x86_64
>   MKFS_OPTIONS  -- -f -m rmapbt=1 /dev/sda3
>   MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/sda3 /mnt/scratch
> 
>   xfs/157 7s ... - output mismatch (see /root/git/xfstests/results//xfs/157.out.bad)
>       --- tests/xfs/157.out       2024-11-01 01:05:03.664543576 +0800
>       +++ /root/git/xfstests/results//xfs/157.out.bad     2024-11-01 02:56:47.994007900 +0800
>       @@ -6,10 +6,10 @@
>        label = "oldlabel"
>        label = "newlabel"
>        S3: Check that setting with rtdev works
>       -label = "oldlabel"
>       +label = ""
>        label = "newlabel"
>        S4: Check that setting with rtdev + logdev works
>       ...
>       (Run 'diff -u /root/git/xfstests/tests/xfs/157.out /root/git/xfstests/results//xfs/157.out.bad'  to see the entire diff)
>   Ran: xfs/157
>   Failures: xfs/157
>   Failed 1 of 1 tests
> 
> Before that change, the _scratch_mkfs can drop "rmapbt=1" option from $MKFS_OPTIONS,
> only keep the "-L label" option. That's why this test never failed before.
> 
> Now it fails on xfs, if MKFS_OPTIONS contains "-m rmapbt=1", the reason as I
> explained above.
> 
> Thanks,
> Zorro
> 
>  tests/xfs/157 | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index 9b5badbae..459c6de7c 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -66,8 +66,7 @@ scenario() {
>  }
>  
>  check_label() {
> -	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> -		>> $seqres.full
> +	_scratch_mkfs -L oldlabel >> $seqres.full 2>&1

Hans Holmberg discovered that this mkfs fails if the SCRATCH_RTDEV is
very large and SCRATCH_DEV is set to the 500M fake_datafile because the
rtbitmap is larger than the datadev.

I wonder if there's a way to pass the -L argument through in the
"attempting to mkfs using only" case?

--D

>  	_scratch_xfs_db -c label
>  	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
>  	_scratch_xfs_db -c label
> -- 
> 2.45.2
> 
>
Zorro Lang Nov. 1, 2024, 5:48 a.m. UTC | #2
On Thu, Oct 31, 2024 at 03:08:21PM -0700, Darrick J. Wong wrote:
> On Fri, Nov 01, 2024 at 03:35:52AM +0800, Zorro Lang wrote:
> > The xfs/157 doesn't need to do a "sized" mkfs, the image file is
> > 500MiB, don't need to do _scratch_mkfs_sized with a 500MiB fssize
> > argument, a general _scratch_mkfs is good enough.
> > 
> > Besides that, if we do:
> > 
> >   MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size
> > 
> > the _scratch_mkfs_sized trys to keep the $fs_size, when mkfs fails
> > with incompatible $MKFS_OPTIONS options, likes this:
> > 
> >   ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 **
> >   ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 **
> > 
> > But if we do:
> > 
> >   _scratch_mkfs -L oldlabel
> > 
> > the _scratch_mkfs trys to keep the "-L oldlabel", when mkfs fails
> > with incompatible $MKFS_OPTIONS options, likes this:
> > 
> >   ** mkfs failed with extra mkfs options added to "-m rmapbt=1" by test 157 **
> >   ** attempting to mkfs using only test 157 options: -L oldlabel **
> > 
> > that's actually what we need.
> > 
> > Signed-off-by: Zorro Lang <zlang@kernel.org>
> > ---
> > 
> > This test started to fail since 2f7e1b8a6f09 ("xfs/157,xfs/547,xfs/548: switch to
> > using _scratch_mkfs_sized") was merged.
> > 
> >   FSTYP         -- xfs (non-debug)
> >   PLATFORM      -- Linux/x86_64
> >   MKFS_OPTIONS  -- -f -m rmapbt=1 /dev/sda3
> >   MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/sda3 /mnt/scratch
> > 
> >   xfs/157 7s ... - output mismatch (see /root/git/xfstests/results//xfs/157.out.bad)
> >       --- tests/xfs/157.out       2024-11-01 01:05:03.664543576 +0800
> >       +++ /root/git/xfstests/results//xfs/157.out.bad     2024-11-01 02:56:47.994007900 +0800
> >       @@ -6,10 +6,10 @@
> >        label = "oldlabel"
> >        label = "newlabel"
> >        S3: Check that setting with rtdev works
> >       -label = "oldlabel"
> >       +label = ""
> >        label = "newlabel"
> >        S4: Check that setting with rtdev + logdev works
> >       ...
> >       (Run 'diff -u /root/git/xfstests/tests/xfs/157.out /root/git/xfstests/results//xfs/157.out.bad'  to see the entire diff)
> >   Ran: xfs/157
> >   Failures: xfs/157
> >   Failed 1 of 1 tests
> > 
> > Before that change, the _scratch_mkfs can drop "rmapbt=1" option from $MKFS_OPTIONS,
> > only keep the "-L label" option. That's why this test never failed before.
> > 
> > Now it fails on xfs, if MKFS_OPTIONS contains "-m rmapbt=1", the reason as I
> > explained above.
> > 
> > Thanks,
> > Zorro
> > 
> >  tests/xfs/157 | 3 +--
> >  1 file changed, 1 insertion(+), 2 deletions(-)
> > 
> > diff --git a/tests/xfs/157 b/tests/xfs/157
> > index 9b5badbae..459c6de7c 100755
> > --- a/tests/xfs/157
> > +++ b/tests/xfs/157
> > @@ -66,8 +66,7 @@ scenario() {
> >  }
> >  
> >  check_label() {
> > -	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> > -		>> $seqres.full
> > +	_scratch_mkfs -L oldlabel >> $seqres.full 2>&1
> 
> Hans Holmberg discovered that this mkfs fails if the SCRATCH_RTDEV is
> very large and SCRATCH_DEV is set to the 500M fake_datafile because the
> rtbitmap is larger than the datadev.
> 
> I wonder if there's a way to pass the -L argument through in the
> "attempting to mkfs using only" case?

As I know mkfs.xfs can disable rmapbt automatically if "-r rtdevt=xxx" is
used.

How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?

Any better idea?

Thanks,
Zorro

> 
> --D
> 
> >  	_scratch_xfs_db -c label
> >  	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
> >  	_scratch_xfs_db -c label
> > -- 
> > 2.45.2
> > 
> > 
>
Darrick J. Wong Nov. 1, 2024, 9:49 p.m. UTC | #3
On Fri, Nov 01, 2024 at 01:48:10PM +0800, Zorro Lang wrote:
> On Thu, Oct 31, 2024 at 03:08:21PM -0700, Darrick J. Wong wrote:
> > On Fri, Nov 01, 2024 at 03:35:52AM +0800, Zorro Lang wrote:
> > > The xfs/157 doesn't need to do a "sized" mkfs, the image file is
> > > 500MiB, don't need to do _scratch_mkfs_sized with a 500MiB fssize
> > > argument, a general _scratch_mkfs is good enough.
> > > 
> > > Besides that, if we do:
> > > 
> > >   MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size
> > > 
> > > the _scratch_mkfs_sized trys to keep the $fs_size, when mkfs fails
> > > with incompatible $MKFS_OPTIONS options, likes this:
> > > 
> > >   ** mkfs failed with extra mkfs options added to "-L oldlabel -m rmapbt=1" by test 157 **
> > >   ** attempting to mkfs using only test 157 options: -d size=524288000 -b size=4096 **
> > > 
> > > But if we do:
> > > 
> > >   _scratch_mkfs -L oldlabel
> > > 
> > > the _scratch_mkfs trys to keep the "-L oldlabel", when mkfs fails
> > > with incompatible $MKFS_OPTIONS options, likes this:
> > > 
> > >   ** mkfs failed with extra mkfs options added to "-m rmapbt=1" by test 157 **
> > >   ** attempting to mkfs using only test 157 options: -L oldlabel **
> > > 
> > > that's actually what we need.
> > > 
> > > Signed-off-by: Zorro Lang <zlang@kernel.org>
> > > ---
> > > 
> > > This test started to fail since 2f7e1b8a6f09 ("xfs/157,xfs/547,xfs/548: switch to
> > > using _scratch_mkfs_sized") was merged.
> > > 
> > >   FSTYP         -- xfs (non-debug)
> > >   PLATFORM      -- Linux/x86_64
> > >   MKFS_OPTIONS  -- -f -m rmapbt=1 /dev/sda3
> > >   MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/sda3 /mnt/scratch
> > > 
> > >   xfs/157 7s ... - output mismatch (see /root/git/xfstests/results//xfs/157.out.bad)
> > >       --- tests/xfs/157.out       2024-11-01 01:05:03.664543576 +0800
> > >       +++ /root/git/xfstests/results//xfs/157.out.bad     2024-11-01 02:56:47.994007900 +0800
> > >       @@ -6,10 +6,10 @@
> > >        label = "oldlabel"
> > >        label = "newlabel"
> > >        S3: Check that setting with rtdev works
> > >       -label = "oldlabel"
> > >       +label = ""
> > >        label = "newlabel"
> > >        S4: Check that setting with rtdev + logdev works
> > >       ...
> > >       (Run 'diff -u /root/git/xfstests/tests/xfs/157.out /root/git/xfstests/results//xfs/157.out.bad'  to see the entire diff)
> > >   Ran: xfs/157
> > >   Failures: xfs/157
> > >   Failed 1 of 1 tests
> > > 
> > > Before that change, the _scratch_mkfs can drop "rmapbt=1" option from $MKFS_OPTIONS,
> > > only keep the "-L label" option. That's why this test never failed before.
> > > 
> > > Now it fails on xfs, if MKFS_OPTIONS contains "-m rmapbt=1", the reason as I
> > > explained above.
> > > 
> > > Thanks,
> > > Zorro
> > > 
> > >  tests/xfs/157 | 3 +--
> > >  1 file changed, 1 insertion(+), 2 deletions(-)
> > > 
> > > diff --git a/tests/xfs/157 b/tests/xfs/157
> > > index 9b5badbae..459c6de7c 100755
> > > --- a/tests/xfs/157
> > > +++ b/tests/xfs/157
> > > @@ -66,8 +66,7 @@ scenario() {
> > >  }
> > >  
> > >  check_label() {
> > > -	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> > > -		>> $seqres.full
> > > +	_scratch_mkfs -L oldlabel >> $seqres.full 2>&1
> > 
> > Hans Holmberg discovered that this mkfs fails if the SCRATCH_RTDEV is
> > very large and SCRATCH_DEV is set to the 500M fake_datafile because the
> > rtbitmap is larger than the datadev.
> > 
> > I wonder if there's a way to pass the -L argument through in the
> > "attempting to mkfs using only" case?
> 
> As I know mkfs.xfs can disable rmapbt automatically if "-r rtdevt=xxx" is
> used.

That's not going to last forever, rmap support is coming for realtime,
hopefully for 6.14.

> How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
> and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?

That will exclude quite a few configurations.  Also, how many people
actually turn on rmapbt explicitly now?

> Any better idea?

I'm afraid not.  Maybe I should restructure the test to force the rt
device to be 500MB even when we're not using the fake rtdev?

--D

> Thanks,
> Zorro
> 
> > 
> > --D
> > 
> > >  	_scratch_xfs_db -c label
> > >  	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
> > >  	_scratch_xfs_db -c label
> > > -- 
> > > 2.45.2
> > > 
> > > 
> > 
>
Christoph Hellwig Nov. 4, 2024, 7:50 a.m. UTC | #4
On Fri, Nov 01, 2024 at 02:49:26PM -0700, Darrick J. Wong wrote:
> > How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
> > and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?
> 
> That will exclude quite a few configurations.  Also, how many people
> actually turn on rmapbt explicitly now?
> 
> > Any better idea?
> 
> I'm afraid not.  Maybe I should restructure the test to force the rt
> device to be 500MB even when we're not using the fake rtdev?

All of this is really just bandaids or the fundamental problem that:

 - we try to abitrarily mix config and test provided options without
   checking that they are compatible in general, and with what the test
   is trying to specifically
 - some combination of options and devices (size, block size, sequential
   required zoned) fundamentally can't work

I haven't really found an easy solution for them.  In the long run I
suspect we need to split tests between those that just take the options
from the config and are supposed to work with all options (maybe a few
notruns that fundamentally can't work).  And those that want to test
specific mkfs/mount options and hard code them but don't take options
from the input.
Zorro Lang Nov. 4, 2024, 1:04 p.m. UTC | #5
On Sun, Nov 03, 2024 at 11:50:32PM -0800, Christoph Hellwig wrote:
> On Fri, Nov 01, 2024 at 02:49:26PM -0700, Darrick J. Wong wrote:
> > > How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
> > > and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?
> > 
> > That will exclude quite a few configurations.  Also, how many people
> > actually turn on rmapbt explicitly now?
> > 
> > > Any better idea?
> > 
> > I'm afraid not.  Maybe I should restructure the test to force the rt
> > device to be 500MB even when we're not using the fake rtdev?
> 
> All of this is really just bandaids or the fundamental problem that:
> 
>  - we try to abitrarily mix config and test provided options without
>    checking that they are compatible in general, and with what the test
>    is trying to specifically
>  - some combination of options and devices (size, block size, sequential
>    required zoned) fundamentally can't work
> 
> I haven't really found an easy solution for them.  In the long run I
> suspect we need to split tests between those that just take the options
> from the config and are supposed to work with all options (maybe a few
> notruns that fundamentally can't work).  And those that want to test
> specific mkfs/mount options and hard code them but don't take options
> from the input.

So how about unset extra MKFS_OPTIONS in this case ? This test has its own
mkfs options (-L label and logdev and rtdev and fssize).

Thanks,
Zorro

> 
>
Darrick J. Wong Nov. 4, 2024, 11:34 p.m. UTC | #6
On Mon, Nov 04, 2024 at 09:04:37PM +0800, Zorro Lang wrote:
> On Sun, Nov 03, 2024 at 11:50:32PM -0800, Christoph Hellwig wrote:
> > On Fri, Nov 01, 2024 at 02:49:26PM -0700, Darrick J. Wong wrote:
> > > > How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
> > > > and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?
> > > 
> > > That will exclude quite a few configurations.  Also, how many people
> > > actually turn on rmapbt explicitly now?
> > > 
> > > > Any better idea?
> > > 
> > > I'm afraid not.  Maybe I should restructure the test to force the rt
> > > device to be 500MB even when we're not using the fake rtdev?
> > 
> > All of this is really just bandaids or the fundamental problem that:
> > 
> >  - we try to abitrarily mix config and test provided options without
> >    checking that they are compatible in general, and with what the test
> >    is trying to specifically
> >  - some combination of options and devices (size, block size, sequential
> >    required zoned) fundamentally can't work
> > 
> > I haven't really found an easy solution for them.  In the long run I
> > suspect we need to split tests between those that just take the options
> > from the config and are supposed to work with all options (maybe a few
> > notruns that fundamentally can't work).  And those that want to test
> > specific mkfs/mount options and hard code them but don't take options
> > from the input.
> 
> So how about unset extra MKFS_OPTIONS in this case ? This test has its own
> mkfs options (-L label and logdev and rtdev and fssize).

The trouble with clearing MKFS_OPTIONS is that you then have to adjust
the other _scratch_* calls in check_label(), and then all you're doing
is reducing fs configuration test coverage.  If (say) there was a bug
when changing the fs label on a rtgroups filesystem with a rt section,
you'd never see it.

Hang on ... is this a general complaint about _scratch_mkfs_xfs dropping
MKFS_OPTIONS in favor of the specific arguments passed to it by the
test?  Or a specific complaint about xfs/157 barfing when the test
runner puts "-L foo" in the MKFS_OPTIONS that it passes to ./check?

If it's the second, then let's do this:

extract_mkfs_label() {
	set -- $MKFS_OPTIONS
	local in_l

	for arg in "$@"; do
		if [ "$in_l" = "1" ]; then
			echo "$arg"
			return 0
		elif [ "$arg" = "-L" ]; then
			in_l=1
		fi
	done
	return 1
}

check_label() {
	local existing_label
	local filter

	# Handle -L somelabel being set in MKFS_OPTIONS
	if existing_label="$(extract_mkfs_label)"; then
		filter=(sed -e "s|$existing_label|oldlabel|g")
		_scratch_mkfs_sized $fs_size >> $seqres.full
	else
		filter=(cat)
		MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" \
			_scratch_mkfs_sized $fs_size >> $seqres.full
	fi
	_scratch_xfs_db -c label | ${filter[@]}
	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
	_scratch_xfs_db -c label
	_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
}

--D

> Thanks,
> Zorro
> 
> > 
> > 
> 
>
Dave Chinner Nov. 5, 2024, 6:58 a.m. UTC | #7
On Mon, Nov 04, 2024 at 03:34:26PM -0800, Darrick J. Wong wrote:
> On Mon, Nov 04, 2024 at 09:04:37PM +0800, Zorro Lang wrote:
> > On Sun, Nov 03, 2024 at 11:50:32PM -0800, Christoph Hellwig wrote:
> > > On Fri, Nov 01, 2024 at 02:49:26PM -0700, Darrick J. Wong wrote:
> > > > > How about unset the MKFS_OPTIONS for this test? As it already tests rtdev
> > > > > and logdev by itself. Or call _notrun if MKFS_OPTIONS has "rmapbt=1"?
> > > > 
> > > > That will exclude quite a few configurations.  Also, how many people
> > > > actually turn on rmapbt explicitly now?
> > > > 
> > > > > Any better idea?
> > > > 
> > > > I'm afraid not.  Maybe I should restructure the test to force the rt
> > > > device to be 500MB even when we're not using the fake rtdev?
> > > 
> > > All of this is really just bandaids or the fundamental problem that:
> > > 
> > >  - we try to abitrarily mix config and test provided options without
> > >    checking that they are compatible in general, and with what the test
> > >    is trying to specifically
> > >  - some combination of options and devices (size, block size, sequential
> > >    required zoned) fundamentally can't work
> > > 
> > > I haven't really found an easy solution for them.  In the long run I
> > > suspect we need to split tests between those that just take the options
> > > from the config and are supposed to work with all options (maybe a few
> > > notruns that fundamentally can't work).  And those that want to test
> > > specific mkfs/mount options and hard code them but don't take options
> > > from the input.
> > 
> > So how about unset extra MKFS_OPTIONS in this case ? This test has its own
> > mkfs options (-L label and logdev and rtdev and fssize).
> 
> The trouble with clearing MKFS_OPTIONS is that you then have to adjust
> the other _scratch_* calls in check_label(), and then all you're doing
> is reducing fs configuration test coverage.  If (say) there was a bug
> when changing the fs label on a rtgroups filesystem with a rt section,
> you'd never see it.

Nobody need to overload MKFS_OPTIONS or unset it.  Local test
configs are supposed to be passed as function parameters, whilst
MKFS_OPTIONS defines the global defaults.

When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
and uses only the local parameters so the filesystem is set up with
the configuration the test expects.

In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
overloads the global MKFS_OPTIONS with local test options, the local
test parameters are dropped along with the global paramters when
there is a conflict. Hence the mkfs_scratch call fails to set the
filesystem up the way the test expects.

IOWs, Zorro's fix is correct and the right one to make - it fixes
the failures here on all the config sections I have that have
configs that aren't compatible with RT devices.

-Dave.
Dave Chinner Nov. 5, 2024, 6:58 a.m. UTC | #8
On Fri, Nov 01, 2024 at 03:35:52AM +0800, Zorro Lang wrote:
> The xfs/157 doesn't need to do a "sized" mkfs, the image file is
> 500MiB, don't need to do _scratch_mkfs_sized with a 500MiB fssize
> argument, a general _scratch_mkfs is good enough.
.....
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index 9b5badbae..459c6de7c 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -66,8 +66,7 @@ scenario() {
>  }
>  
>  check_label() {
> -	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> -		>> $seqres.full
> +	_scratch_mkfs -L oldlabel >> $seqres.full 2>&1
>  	_scratch_xfs_db -c label
>  	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
>  	_scratch_xfs_db -c label

Looks good, fixes the failure I'm getting here.

Reviewed-by: Dave Chinner <dchinner@redhat.com>

-Dave.
Christoph Hellwig Nov. 5, 2024, 3:02 p.m. UTC | #9
On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> and uses only the local parameters so the filesystem is set up with
> the configuration the test expects.
> 
> In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> overloads the global MKFS_OPTIONS with local test options, the local
> test parameters are dropped along with the global paramters when
> there is a conflict. Hence the mkfs_scratch call fails to set the
> filesystem up the way the test expects.

But the rmapbt can be default on, in which case it does not get
removed.  And then without the _sized we'll run into the problem that
Hans' patches fixed once again.
Darrick J. Wong Nov. 5, 2024, 3:47 p.m. UTC | #10
On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > and uses only the local parameters so the filesystem is set up with
> > the configuration the test expects.
> > 
> > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > overloads the global MKFS_OPTIONS with local test options, the local
> > test parameters are dropped along with the global paramters when
> > there is a conflict. Hence the mkfs_scratch call fails to set the
> > filesystem up the way the test expects.
> 
> But the rmapbt can be default on, in which case it does not get
> removed.  And then without the _sized we'll run into the problem that
> Hans' patches fixed once again.

Well we /could/ make _scratch_mkfs_sized pass options through to the
underlying _scratch_mkfs.

--D
Dave Chinner Nov. 7, 2024, 5:40 a.m. UTC | #11
On Tue, Nov 05, 2024 at 07:47:12AM -0800, Darrick J. Wong wrote:
> On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> > On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > > and uses only the local parameters so the filesystem is set up with
> > > the configuration the test expects.
> > > 
> > > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > > overloads the global MKFS_OPTIONS with local test options, the local
> > > test parameters are dropped along with the global paramters when
> > > there is a conflict. Hence the mkfs_scratch call fails to set the
> > > filesystem up the way the test expects.
> > 
> > But the rmapbt can be default on, in which case it does not get
> > removed.  And then without the _sized we'll run into the problem that
> > Hans' patches fixed once again.
> 
> Well we /could/ make _scratch_mkfs_sized pass options through to the
> underlying _scratch_mkfs.

That seems like the right thing to do to me.

-Dave.
Zorro Lang Nov. 7, 2024, 10:10 a.m. UTC | #12
On Thu, Nov 07, 2024 at 04:40:34PM +1100, Dave Chinner wrote:
> On Tue, Nov 05, 2024 at 07:47:12AM -0800, Darrick J. Wong wrote:
> > On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> > > On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > > > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > > > and uses only the local parameters so the filesystem is set up with
> > > > the configuration the test expects.
> > > > 
> > > > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > > > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > > > overloads the global MKFS_OPTIONS with local test options, the local
> > > > test parameters are dropped along with the global paramters when
> > > > there is a conflict. Hence the mkfs_scratch call fails to set the
> > > > filesystem up the way the test expects.
> > > 
> > > But the rmapbt can be default on, in which case it does not get
> > > removed.  And then without the _sized we'll run into the problem that
> > > Hans' patches fixed once again.
> > 
> > Well we /could/ make _scratch_mkfs_sized pass options through to the
> > underlying _scratch_mkfs.
> 
> That seems like the right thing to do to me.

OK, thanks for all of these suggestions, how about below (draft) change[1].
If it's good to all of you, I'll send another patch.

Thanks,
Zorro

diff --git a/common/rc b/common/rc
index 2af26f23f..673f056fb 100644
--- a/common/rc
+++ b/common/rc
@@ -1027,7 +1027,9 @@ _small_fs_size_mb()
 _try_scratch_mkfs_sized()
 {
        local fssize=$1
-       local blocksize=$2
+       shift
+       local blocksize=$1
+       shift
        local def_blksz
        local blocksize_opt
        local rt_ops
@@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized()
                # don't override MKFS_OPTIONS that set a block size.
                echo $MKFS_OPTIONS |grep -E -q "b\s*size="
                if [ $? -eq 0 ]; then
-                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops
+                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops $@
                else
                        _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
-                               -b size=$blocksize
+                               -b size=$blocksize $@
                fi
                ;;
        ext2|ext3|ext4)
@@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized()
                                _notrun "Could not make scratch logdev"
                        MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV"
                fi
-               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
+               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
                ;;
        gfs2)
                # mkfs.gfs2 doesn't automatically shrink journal files on small
@@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized()
                        (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
                        MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
                fi
-               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
+               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $@ $SCRATCH_DEV $blocks
                ;;
        ocfs2)
-               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
+               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
                ;;
        udf)
-               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
+               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
                ;;
        btrfs)
                local mixed_opt=
@@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized()
                # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size()
                (( fssize < $((256 * 1024 * 1024)) )) &&
                        ! _scratch_btrfs_is_zoned && mixed_opt='--mixed'
-               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
+               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $@ $SCRATCH_DEV
                ;;
        jfs)
-               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
+               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $@ $SCRATCH_DEV $blocks
                ;;
        reiserfs)
-               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
+               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
                ;;
        reiser4)
                # mkfs.resier4 requires size in KB as input for creating filesystem
-               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
+               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $@ $SCRATCH_DEV \
                                   `expr $fssize / 1024`
                ;;
        f2fs)
                # mkfs.f2fs requires # of sectors as an input for the size
                local sector_size=`blockdev --getss $SCRATCH_DEV`
-               $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
+               $MKFS_F2FS_PROG $MKFS_OPTIONS $@ $SCRATCH_DEV `expr $fssize / $sector_size`
                ;;
        tmpfs)
                local free_mem=`_free_memory_bytes`
                if [ "$free_mem" -lt "$fssize" ] ; then
                   _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
                fi
-               export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
+               export MOUNT_OPTIONS="-o size=$fssize $@ $TMPFS_MOUNT_OPTIONS"
                ;;
        bcachefs)
-               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV
+               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $@ $SCRATCH_DEV
                ;;
        *)
                _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
@@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized()
 
 _scratch_mkfs_sized()
 {
-       _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)"
+       _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)"
 }
 
 # Emulate an N-data-disk stripe w/ various stripe units
diff --git a/tests/xfs/157 b/tests/xfs/157
index 9b5badbae..f8f102d78 100755
--- a/tests/xfs/157
+++ b/tests/xfs/157
@@ -66,8 +66,7 @@ scenario() {
 }
 
 check_label() {
-       MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
-               >> $seqres.full
+       _scratch_mkfs_sized "$fs_size" "" "-L oldlabel" >> $seqres.full 2>&1
        _scratch_xfs_db -c label
        _scratch_xfs_admin -L newlabel "$@" >> $seqres.full
        _scratch_xfs_db -c label




> 
> -Dave.
> -- 
> Dave Chinner
> david@fromorbit.com
>
Darrick J. Wong Nov. 7, 2024, 11:53 p.m. UTC | #13
On Thu, Nov 07, 2024 at 06:10:11PM +0800, Zorro Lang wrote:
> On Thu, Nov 07, 2024 at 04:40:34PM +1100, Dave Chinner wrote:
> > On Tue, Nov 05, 2024 at 07:47:12AM -0800, Darrick J. Wong wrote:
> > > On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> > > > On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > > > > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > > > > and uses only the local parameters so the filesystem is set up with
> > > > > the configuration the test expects.
> > > > > 
> > > > > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > > > > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > > > > overloads the global MKFS_OPTIONS with local test options, the local
> > > > > test parameters are dropped along with the global paramters when
> > > > > there is a conflict. Hence the mkfs_scratch call fails to set the
> > > > > filesystem up the way the test expects.
> > > > 
> > > > But the rmapbt can be default on, in which case it does not get
> > > > removed.  And then without the _sized we'll run into the problem that
> > > > Hans' patches fixed once again.
> > > 
> > > Well we /could/ make _scratch_mkfs_sized pass options through to the
> > > underlying _scratch_mkfs.
> > 
> > That seems like the right thing to do to me.
> 
> OK, thanks for all of these suggestions, how about below (draft) change[1].
> If it's good to all of you, I'll send another patch.
> 
> Thanks,
> Zorro
> 
> diff --git a/common/rc b/common/rc
> index 2af26f23f..673f056fb 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -1027,7 +1027,9 @@ _small_fs_size_mb()
>  _try_scratch_mkfs_sized()
>  {
>         local fssize=$1
> -       local blocksize=$2
> +       shift
> +       local blocksize=$1
> +       shift
>         local def_blksz
>         local blocksize_opt
>         local rt_ops
> @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized()
>                 # don't override MKFS_OPTIONS that set a block size.
>                 echo $MKFS_OPTIONS |grep -E -q "b\s*size="
>                 if [ $? -eq 0 ]; then
> -                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops
> +                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops $@
>                 else
>                         _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
> -                               -b size=$blocksize
> +                               -b size=$blocksize $@
>                 fi
>                 ;;
>         ext2|ext3|ext4)
> @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized()
>                                 _notrun "Could not make scratch logdev"
>                         MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV"
>                 fi
> -               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         gfs2)
>                 # mkfs.gfs2 doesn't automatically shrink journal files on small
> @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized()
>                         (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
>                         MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
>                 fi
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         ocfs2)
> -               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         udf)
> -               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         btrfs)
>                 local mixed_opt=
> @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized()
>                 # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size()
>                 (( fssize < $((256 * 1024 * 1024)) )) &&
>                         ! _scratch_btrfs_is_zoned && mixed_opt='--mixed'
> -               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
> +               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $@ $SCRATCH_DEV
>                 ;;
>         jfs)
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $@ $SCRATCH_DEV $blocks
>                 ;;
>         reiserfs)
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         reiser4)
>                 # mkfs.resier4 requires size in KB as input for creating filesystem
> -               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
> +               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $@ $SCRATCH_DEV \
>                                    `expr $fssize / 1024`
>                 ;;
>         f2fs)
>                 # mkfs.f2fs requires # of sectors as an input for the size
>                 local sector_size=`blockdev --getss $SCRATCH_DEV`
> -               $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
> +               $MKFS_F2FS_PROG $MKFS_OPTIONS $@ $SCRATCH_DEV `expr $fssize / $sector_size`
>                 ;;
>         tmpfs)
>                 local free_mem=`_free_memory_bytes`
>                 if [ "$free_mem" -lt "$fssize" ] ; then
>                    _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
>                 fi
> -               export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
> +               export MOUNT_OPTIONS="-o size=$fssize $@ $TMPFS_MOUNT_OPTIONS"
>                 ;;
>         bcachefs)
> -               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV
> +               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $@ $SCRATCH_DEV
>                 ;;
>         *)
>                 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
> @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized()
>  
>  _scratch_mkfs_sized()
>  {
> -       _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)"
> +       _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)"
>  }
>  
>  # Emulate an N-data-disk stripe w/ various stripe units
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index 9b5badbae..f8f102d78 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -66,8 +66,7 @@ scenario() {
>  }
>  
>  check_label() {
> -       MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> -               >> $seqres.full
> +       _scratch_mkfs_sized "$fs_size" "" "-L oldlabel" >> $seqres.full 2>&1
>         _scratch_xfs_db -c label
>         _scratch_xfs_admin -L newlabel "$@" >> $seqres.full
>         _scratch_xfs_db -c label

Looks good to me, though you probably still need to fix the double -L
case:

From: Darrick J. Wong <djwong@kernel.org>
Subject: [PATCH] xfs/157: fix test failures when MKFS_OPTIONS has -L options

Zorro reports that this test now fails if the test runner set an -L
(label) option in MKFS_OPTIONS.  Fix the test to work around this with a
bunch of horrid sed filtering magic.

Cc: <fstests@vger.kernel.org> # v2024.10.14
Fixes: 2f7e1b8a6f09b6 ("xfs/157,xfs/547,xfs/548: switch to using _scratch_mkfs_sized")
---
 tests/xfs/157 |   31 ++++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/tests/xfs/157 b/tests/xfs/157
index 9b5badbaeb3c76..30f8cc870b9af2 100755
--- a/tests/xfs/157
+++ b/tests/xfs/157
@@ -65,10 +65,35 @@ scenario() {
 	SCRATCH_RTDEV=$orig_rtdev
 }
 
+extract_mkfs_label() {
+	set -- $MKFS_OPTIONS
+	local in_l
+
+	for arg in "$@"; do
+		if [ "$in_l" = "1" ]; then
+			echo "$arg"
+			return 0
+		elif [ "$arg" = "-L" ]; then
+			in_l=1
+		fi
+	done
+	return 1
+}
+
 check_label() {
-	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
-		>> $seqres.full
-	_scratch_xfs_db -c label
+	local existing_label
+	local filter
+
+	# Handle -L somelabel being set in MKFS_OPTIONS
+	if existing_label="$(extract_mkfs_label)"; then
+		filter=(sed -e "s|$existing_label|oldlabel|g")
+		_scratch_mkfs_sized $fs_size >> $seqres.full
+	else
+		filter=(cat)
+		MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" \
+			_scratch_mkfs_sized $fs_size >> $seqres.full
+	fi
+	_scratch_xfs_db -c label | "${filter[@]}"
 	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
 	_scratch_xfs_db -c label
 	_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
Darrick J. Wong Nov. 14, 2024, 11:43 p.m. UTC | #14
On Thu, Nov 07, 2024 at 06:10:11PM +0800, Zorro Lang wrote:
> On Thu, Nov 07, 2024 at 04:40:34PM +1100, Dave Chinner wrote:
> > On Tue, Nov 05, 2024 at 07:47:12AM -0800, Darrick J. Wong wrote:
> > > On Tue, Nov 05, 2024 at 07:02:26AM -0800, Christoph Hellwig wrote:
> > > > On Tue, Nov 05, 2024 at 05:58:03PM +1100, Dave Chinner wrote:
> > > > > When the two conflict, _scratch_mkfs drops the global MKFS_OPTIONS
> > > > > and uses only the local parameters so the filesystem is set up with
> > > > > the configuration the test expects.
> > > > > 
> > > > > In this case, MKFS_OPTIONS="-m rmapbt=1" which conflicts with the
> > > > > local RTDEV/USE_EXTERNAL test setup. Because the test icurrently
> > > > > overloads the global MKFS_OPTIONS with local test options, the local
> > > > > test parameters are dropped along with the global paramters when
> > > > > there is a conflict. Hence the mkfs_scratch call fails to set the
> > > > > filesystem up the way the test expects.
> > > > 
> > > > But the rmapbt can be default on, in which case it does not get
> > > > removed.  And then without the _sized we'll run into the problem that
> > > > Hans' patches fixed once again.
> > > 
> > > Well we /could/ make _scratch_mkfs_sized pass options through to the
> > > underlying _scratch_mkfs.
> > 
> > That seems like the right thing to do to me.
> 
> OK, thanks for all of these suggestions, how about below (draft) change[1].
> If it's good to all of you, I'll send another patch.
> 
> Thanks,
> Zorro
> 
> diff --git a/common/rc b/common/rc
> index 2af26f23f..673f056fb 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -1027,7 +1027,9 @@ _small_fs_size_mb()
>  _try_scratch_mkfs_sized()
>  {
>         local fssize=$1
> -       local blocksize=$2
> +       shift
> +       local blocksize=$1
> +       shift
>         local def_blksz
>         local blocksize_opt
>         local rt_ops
> @@ -1091,10 +1093,10 @@ _try_scratch_mkfs_sized()
>                 # don't override MKFS_OPTIONS that set a block size.
>                 echo $MKFS_OPTIONS |grep -E -q "b\s*size="
>                 if [ $? -eq 0 ]; then
> -                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops
> +                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops $@
>                 else
>                         _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
> -                               -b size=$blocksize
> +                               -b size=$blocksize $@

I've finally had some time to integrate this into my test setup; I'll
try this out tonight.

Note: According to shellcheck, if you use $@, you should enclose it in
double quotes.

                       _try_scratch_mkfs_xfs -d size=$fssize $rt_ops \
                               -b size=$blocksize
                               -b size=$blocksize "$@"
--D


>                 fi
>                 ;;
>         ext2|ext3|ext4)
> @@ -1105,7 +1107,7 @@ _try_scratch_mkfs_sized()
>                                 _notrun "Could not make scratch logdev"
>                         MKFS_OPTIONS="$MKFS_OPTIONS -J device=$SCRATCH_LOGDEV"
>                 fi
> -               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         gfs2)
>                 # mkfs.gfs2 doesn't automatically shrink journal files on small
> @@ -1120,13 +1122,13 @@ _try_scratch_mkfs_sized()
>                         (( journal_size >= min_journal_size )) || journal_size=$min_journal_size
>                         MKFS_OPTIONS="-J $journal_size $MKFS_OPTIONS"
>                 fi
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -O -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         ocfs2)
> -               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               yes | ${MKFS_PROG} -t $FSTYP -F $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         udf)
> -               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               $MKFS_UDF_PROG $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         btrfs)
>                 local mixed_opt=
> @@ -1134,33 +1136,33 @@ _try_scratch_mkfs_sized()
>                 # the device is not zoned. Ref: btrfs-progs: btrfs_min_dev_size()
>                 (( fssize < $((256 * 1024 * 1024)) )) &&
>                         ! _scratch_btrfs_is_zoned && mixed_opt='--mixed'
> -               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $SCRATCH_DEV
> +               $MKFS_BTRFS_PROG $MKFS_OPTIONS $mixed_opt -b $fssize $@ $SCRATCH_DEV
>                 ;;
>         jfs)
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS $@ $SCRATCH_DEV $blocks
>                 ;;
>         reiserfs)
> -               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $SCRATCH_DEV $blocks
> +               ${MKFS_PROG} -t $FSTYP $MKFS_OPTIONS -b $blocksize $@ $SCRATCH_DEV $blocks
>                 ;;
>         reiser4)
>                 # mkfs.resier4 requires size in KB as input for creating filesystem
> -               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $SCRATCH_DEV \
> +               $MKFS_REISER4_PROG $MKFS_OPTIONS -y -b $blocksize $@ $SCRATCH_DEV \
>                                    `expr $fssize / 1024`
>                 ;;
>         f2fs)
>                 # mkfs.f2fs requires # of sectors as an input for the size
>                 local sector_size=`blockdev --getss $SCRATCH_DEV`
> -               $MKFS_F2FS_PROG $MKFS_OPTIONS $SCRATCH_DEV `expr $fssize / $sector_size`
> +               $MKFS_F2FS_PROG $MKFS_OPTIONS $@ $SCRATCH_DEV `expr $fssize / $sector_size`
>                 ;;
>         tmpfs)
>                 local free_mem=`_free_memory_bytes`
>                 if [ "$free_mem" -lt "$fssize" ] ; then
>                    _notrun "Not enough memory ($free_mem) for tmpfs with $fssize bytes"
>                 fi
> -               export MOUNT_OPTIONS="-o size=$fssize $TMPFS_MOUNT_OPTIONS"
> +               export MOUNT_OPTIONS="-o size=$fssize $@ $TMPFS_MOUNT_OPTIONS"
>                 ;;
>         bcachefs)
> -               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $SCRATCH_DEV
> +               $MKFS_BCACHEFS_PROG $MKFS_OPTIONS --fs_size=$fssize $blocksize_opt $@ $SCRATCH_DEV
>                 ;;
>         *)
>                 _notrun "Filesystem $FSTYP not supported in _scratch_mkfs_sized"
> @@ -1170,7 +1172,7 @@ _try_scratch_mkfs_sized()
>  
>  _scratch_mkfs_sized()
>  {
> -       _try_scratch_mkfs_sized $* || _notrun "_scratch_mkfs_sized failed with ($*)"
> +       _try_scratch_mkfs_sized "$@" || _notrun "_scratch_mkfs_sized failed with ($@)"
>  }
>  
>  # Emulate an N-data-disk stripe w/ various stripe units
> diff --git a/tests/xfs/157 b/tests/xfs/157
> index 9b5badbae..f8f102d78 100755
> --- a/tests/xfs/157
> +++ b/tests/xfs/157
> @@ -66,8 +66,7 @@ scenario() {
>  }
>  
>  check_label() {
> -       MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
> -               >> $seqres.full
> +       _scratch_mkfs_sized "$fs_size" "" "-L oldlabel" >> $seqres.full 2>&1
>         _scratch_xfs_db -c label
>         _scratch_xfs_admin -L newlabel "$@" >> $seqres.full
>         _scratch_xfs_db -c label
> 
> 
> 
> 
> > 
> > -Dave.
> > -- 
> > Dave Chinner
> > david@fromorbit.com
> > 
> 
>
diff mbox series

Patch

diff --git a/tests/xfs/157 b/tests/xfs/157
index 9b5badbae..459c6de7c 100755
--- a/tests/xfs/157
+++ b/tests/xfs/157
@@ -66,8 +66,7 @@  scenario() {
 }
 
 check_label() {
-	MKFS_OPTIONS="-L oldlabel $MKFS_OPTIONS" _scratch_mkfs_sized $fs_size \
-		>> $seqres.full
+	_scratch_mkfs -L oldlabel >> $seqres.full 2>&1
 	_scratch_xfs_db -c label
 	_scratch_xfs_admin -L newlabel "$@" >> $seqres.full
 	_scratch_xfs_db -c label