| Message ID | 20241102-camss-msm8953-v2-2-837310e4541c@mainlining.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add MSM8953/SDM450/SDM632 camss support | expand |
On 02/11/2024 01:32, Barnabás Czémán wrote: > Add bindings for qcom,msm8953-camss in order to support the camera > subsystem for MSM8953/SDM450/SDM632. > > Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> > --- > .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++ This looks better. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
On Sat, Nov 02, 2024 at 02:32:29AM +0100, Barnabás Czémán wrote: > Add bindings for qcom,msm8953-camss in order to support the camera > subsystem for MSM8953/SDM450/SDM632. > subject: only one media prefix, the first one. > Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> > --- > .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++ > 1 file changed, 323 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml > new file mode 100644 > index 0000000000000000000000000000000000000000..1d2236bc8d94ba81d8b993a105dc5d6a812c727e > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml > @@ -0,0 +1,323 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + Drop blank line > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm CAMSS ISP All CAMSS? Or only MSM8953? > + > +maintainers: > + - Barnabas Czeman <barnabas.czeman@mainlining.org> > + > +description: | Do not need '|' unless you need to preserve formatting. > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > + > +properties: > + compatible: > + const: qcom,msm8953-camss > + > + clocks: > + minItems: 30 > + maxItems: 30 > + > + clock-names: > + items: > + - const: ahb > + - const: csi0 > + - const: csi0_ahb > + - const: csi0_phy > + - const: csi0_pix > + - const: csi0_rdi > + - const: csi1 > + - const: csi1_ahb > + - const: csi1_phy > + - const: csi1_pix > + - const: csi1_rdi > + - const: csi2 > + - const: csi2_ahb > + - const: csi2_phy > + - const: csi2_pix > + - const: csi2_rdi > + - const: csi_vfe0 > + - const: csi_vfe1 > + - const: csiphy0_timer > + - const: csiphy1_timer > + - const: csiphy2_timer > + - const: ispif_ahb > + - const: micro_ahb > + - const: top_ahb > + - const: vfe0 > + - const: vfe0_ahb > + - const: vfe0_axi > + - const: vfe1 > + - const: vfe1_ahb > + - const: vfe1_axi > + > + interrupts: > + minItems: 9 > + maxItems: 9 > + > + interrupt-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + iommus: > + maxItems: 1 > + > + power-domains: > + items: > + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. > + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. > + > + power-domain-names: > + items: > + - const: vfe0 > + - const: vfe1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + description: > + CSI input ports. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + description: > + An array of physical data lanes indexes. > + Position of an entry determines the logical > + lane number, while the value of an entry > + indicates physical lane index. Lane swapping > + is supported. Physical lane indexes; > + 0, 2, 3, 4. > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + reg: > + minItems: 13 > + maxItems: 13 > + > + reg-names: > + items: > + - const: csi_clk_mux > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy0_clk_mux > + - const: csiphy1 > + - const: csiphy1_clk_mux > + - const: csiphy2 > + - const: csiphy2_clk_mux > + - const: ispif > + - const: vfe0 > + - const: vfe1 > + > + vdda-supply: > + description: > + Definition of the regulator used as analog power supply. > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + - interrupts > + - interrupt-names > + - iommus > + - power-domains > + - power-domain-names > + - vdda-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,gcc-msm8953.h> > + > + camss: camss@1b00000 { > + compatible = "qcom,msm8953-camss"; > + > + reg = <0x1b00020 0x10>, Your DTS was not tested :/. Mismatched unit address. See Soc maintainer profiles about W=1 checks. Do not use us for such review, but tools. Best regards, Krzysztof
On Sat, Nov 02, 2024 at 02:32:29AM +0100, Barnabás Czémán wrote: > Add bindings for qcom,msm8953-camss in order to support the camera > subsystem for MSM8953/SDM450/SDM632. > Also: A nit, subject: drop second/last, redundant "binding". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml new file mode 100644 index 0000000000000000000000000000000000000000..1d2236bc8d94ba81d8b993a105dc5d6a812c727e --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml @@ -0,0 +1,323 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Barnabas Czeman <barnabas.czeman@mainlining.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8953-camss + + clocks: + minItems: 30 + maxItems: 30 + + clock-names: + items: + - const: ahb + - const: csi0 + - const: csi0_ahb + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1 + - const: csi1_ahb + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: csi2 + - const: csi2_ahb + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + - const: csi_vfe0 + - const: csi_vfe1 + - const: csiphy0_timer + - const: csiphy1_timer + - const: csiphy2_timer + - const: ispif_ahb + - const: micro_ahb + - const: top_ahb + - const: vfe0 + - const: vfe0_ahb + - const: vfe0_axi + - const: vfe1 + - const: vfe1_ahb + - const: vfe1_axi + + interrupts: + minItems: 9 + maxItems: 9 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: ispif + - const: vfe0 + - const: vfe1 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: vfe0 + - const: vfe1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + An array of physical data lanes indexes. + Position of an entry determines the logical + lane number, while the value of an entry + indicates physical lane index. Lane swapping + is supported. Physical lane indexes; + 0, 2, 3, 4. + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 13 + maxItems: 13 + + reg-names: + items: + - const: csi_clk_mux + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csiphy2 + - const: csiphy2_clk_mux + - const: ispif + - const: vfe0 + - const: vfe1 + + vdda-supply: + description: + Definition of the regulator used as analog power supply. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - power-domains + - power-domain-names + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-msm8953.h> + + camss: camss@1b00000 { + compatible = "qcom,msm8953-camss"; + + reg = <0x1b00020 0x10>, + <0x1b30000 0x100>, + <0x1b30400 0x100>, + <0x1b30800 0x100>, + <0x1b34000 0x1000>, + <0x1b00030 0x4>, + <0x1b35000 0x1000>, + <0x1b00038 0x4>, + <0x1b36000 0x1000>, + <0x1b00040 0x4>, + <0x1b31000 0x500>, + <0x1b10000 0x1000>, + <0x1b14000 0x1000>; + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + + clocks = <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_CSI2_CLK>, + <&gcc GCC_CAMSS_CSI2_AHB_CLK>, + <&gcc GCC_CAMSS_CSI2PHY_CLK>, + <&gcc GCC_CAMSS_CSI2PIX_CLK>, + <&gcc GCC_CAMSS_CSI2RDI_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE1_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI2PHYTIMER_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_MICRO_AHB_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE0_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_AXI_CLK>, + <&gcc GCC_CAMSS_VFE1_CLK>, + <&gcc GCC_CAMSS_VFE1_AHB_CLK>, + <&gcc GCC_CAMSS_VFE1_AXI_CLK>; + clock-names = "ahb", + "csi0", + "csi0_ahb", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1", + "csi1_ahb", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2", + "csi2_ahb", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi_vfe0", + "csi_vfe1", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "ispif_ahb", + "micro_ahb", + "top_ahb", + "vfe0", + "vfe0_ahb", + "vfe0_axi", + "vfe1", + "vfe1_ahb", + "vfe1_axi"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + + iommus = <&apps_iommu 0x14>; + + power-domains = <&gcc VFE0_GDSC>, + <&gcc VFE1_GDSC>; + power-domain-names = "vfe0", "vfe1"; + + vdda-supply = <®_2v8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + };
Add bindings for qcom,msm8953-camss in order to support the camera subsystem for MSM8953/SDM450/SDM632. Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> --- .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++ 1 file changed, 323 insertions(+)