| Message ID | 20241104131904.30447-1-jiande.lu@mediatek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 408ec48013da87d226c56774a685531081473a12 |
| Headers | show |
| Series | Bluetooth: btusb: Add new HWIDs for MT7925 | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | success | Gitlint PASS |
| tedd_an/SubjectPrefix | success | Gitlint PASS |
| tedd_an/BuildKernel | success | BuildKernel PASS |
| tedd_an/CheckAllWarning | success | CheckAllWarning PASS |
| tedd_an/CheckSparse | success | CheckSparse PASS |
Dear Jiande, Am 04.11.24 um 14:19 schrieb Jiande Lu: > Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. > VID 0x0489, PID 0xe14f > VID 0x0489, PID 0xe150 > VID 0x0489, PID 0xe151 > > Patch has been tested successfully and controller is recognized > device pair successfully. > > MT7925 module bring up message as below. > Bluetooth: Core ver 2.22 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO socket layer initialized > Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 > Bluetooth: hci0: Device setup in 286558 usecs > Bluetooth: hci0: HCI Enhanced Setup Synchronous > Connection command is advertised, but not supported. No line wrapping needed. > Bluetooth: hci0: AOSP extensions version v1.00 > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bluetooth: BNEP socket layer initialized > Bluetooth: MGMT ver 1.22 > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > > Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> > --- > drivers/bluetooth/btusb.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 6dc5a7e76558..77b8500f8e9b 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { > BTUSB_WIDEBAND_SPEECH }, > { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK | > BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | > + BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | > + BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | > + BTUSB_WIDEBAND_SPEECH }, > { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | > BTUSB_WIDEBAND_SPEECH }, > { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK | With the small thing fixed: Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Kind regards, Paul
Dear Jiande, Also, you could add the number to the summary: Bluetooth: btusb: Add 4 HWIDs for MT7925 Am 04.11.24 um 15:20 schrieb Paul Menzel: > Am 04.11.24 um 14:19 schrieb Jiande Lu: >> Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. >> VID 0x0489, PID 0xe14f >> VID 0x0489, PID 0xe150 >> VID 0x0489, PID 0xe151 >> >> Patch has been tested successfully and controller is recognized >> device pair successfully. >> >> MT7925 module bring up message as below. >> Bluetooth: Core ver 2.22 >> Bluetooth: HCI device and connection manager initialized >> Bluetooth: HCI socket layer initialized >> Bluetooth: L2CAP socket layer initialized >> Bluetooth: SCO socket layer initialized >> Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 >> Bluetooth: hci0: Device setup in 286558 usecs >> Bluetooth: hci0: HCI Enhanced Setup Synchronous >> Connection command is advertised, but not supported. > > No line wrapping needed. > >> Bluetooth: hci0: AOSP extensions version v1.00 >> Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >> Bluetooth: BNEP filters: protocol multicast >> Bluetooth: BNEP socket layer initialized >> Bluetooth: MGMT ver 1.22 >> Bluetooth: RFCOMM TTY layer initialized >> Bluetooth: RFCOMM socket layer initialized >> Bluetooth: RFCOMM ver 1.11 >> >> Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> >> --- >> drivers/bluetooth/btusb.c | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c >> index 6dc5a7e76558..77b8500f8e9b 100644 >> --- a/drivers/bluetooth/btusb.c >> +++ b/drivers/bluetooth/btusb.c >> @@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { >> BTUSB_WIDEBAND_SPEECH }, >> { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK | >> BTUSB_WIDEBAND_SPEECH }, >> + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | >> + BTUSB_WIDEBAND_SPEECH }, >> + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | >> + BTUSB_WIDEBAND_SPEECH }, >> + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | >> + BTUSB_WIDEBAND_SPEECH }, >> { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | >> BTUSB_WIDEBAND_SPEECH }, >> { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK | > > With the small thing fixed: > > Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> > > > Kind regards, > > Paul
Hello: This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Mon, 4 Nov 2024 21:19:04 +0800 you wrote: > Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. > VID 0x0489, PID 0xe14f > VID 0x0489, PID 0xe150 > VID 0x0489, PID 0xe151 > > Patch has been tested successfully and controller is recognized > device pair successfully. > > [...] Here is the summary with links: - Bluetooth: btusb: Add new HWIDs for MT7925 https://git.kernel.org/bluetooth/bluetooth-next/c/408ec48013da You are awesome, thank you!
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 6dc5a7e76558..77b8500f8e9b 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -658,6 +658,12 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe14f), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe150), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe151), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3603), .driver_info = BTUSB_MEDIATEK |
Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID 0x0489, PID 0xe14f VID 0x0489, PID 0xe150 VID 0x0489, PID 0xe151 Patch has been tested successfully and controller is recognized device pair successfully. MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> --- drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)