Message ID | 20241104181430.228682-7-sdf@fomichev.me (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | selftests: ncdevmem: Add ncdevmem to ksft | expand |
On Mon, Nov 04, 2024 at 10:14:24AM -0800, Stanislav Fomichev wrote: > Use dualstack socket to support both v4 and v6. v4-mapped-v6 address > can be used to do v4. > > Reviewed-by: Mina Almasry <almasrymina@google.com> > Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> > --- > tools/testing/selftests/net/ncdevmem.c | 99 ++++++++++++++++++-------- > 1 file changed, 71 insertions(+), 28 deletions(-) Reviewed-by: Joe Damato <jdamato@fastly.com>
On Mon, 4 Nov 2024 10:14:24 -0800 Stanislav Fomichev wrote: > -static int configure_flow_steering(void) > +static int configure_flow_steering(struct sockaddr_in6 *server_sin) > { > - return run_command("sudo ethtool -N %s flow-type tcp4 %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > + const char *type = "tcp6"; > + const char *server_addr; > + char buf[256]; > + > + inet_ntop(AF_INET6, &server_sin->sin6_addr, buf, sizeof(buf)); > + server_addr = buf; > + > + if (IN6_IS_ADDR_V4MAPPED(&server_sin->sin6_addr)) { > + type = "tcp4"; > + server_addr = strrchr(server_addr, ':') + 1; > + } > + > + return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > ifname, > + type, > client_ip ? "src-ip" : "", > client_ip ?: "", > - server_ip, > + server_addr, > client_ip ? "src-port" : "", > client_ip ? port : "", > port, start_queue); nit: I think this generate a truncation warning, not sure if it's easy to fix: ncdevmem.c:259:28: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 209 and 215 [-Wformat-truncation=] 259 | return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ maybe make buf smaller?
On 11/04, Jakub Kicinski wrote: > On Mon, 4 Nov 2024 10:14:24 -0800 Stanislav Fomichev wrote: > > -static int configure_flow_steering(void) > > +static int configure_flow_steering(struct sockaddr_in6 *server_sin) > > { > > - return run_command("sudo ethtool -N %s flow-type tcp4 %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > > + const char *type = "tcp6"; > > + const char *server_addr; > > + char buf[256]; > > + > > + inet_ntop(AF_INET6, &server_sin->sin6_addr, buf, sizeof(buf)); > > + server_addr = buf; > > + > > + if (IN6_IS_ADDR_V4MAPPED(&server_sin->sin6_addr)) { > > + type = "tcp4"; > > + server_addr = strrchr(server_addr, ':') + 1; > > + } > > + > > + return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > > ifname, > > + type, > > client_ip ? "src-ip" : "", > > client_ip ?: "", > > - server_ip, > > + server_addr, > > client_ip ? "src-port" : "", > > client_ip ? port : "", > > port, start_queue); > > nit: I think this generate a truncation warning, not sure if it's easy > to fix: > > ncdevmem.c:259:28: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 209 and 215 [-Wformat-truncation=] > 259 | return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > maybe make buf smaller?
On 11/04, Stanislav Fomichev wrote: > On 11/04, Jakub Kicinski wrote: > > On Mon, 4 Nov 2024 10:14:24 -0800 Stanislav Fomichev wrote: > > > -static int configure_flow_steering(void) > > > +static int configure_flow_steering(struct sockaddr_in6 *server_sin) > > > { > > > - return run_command("sudo ethtool -N %s flow-type tcp4 %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > > > + const char *type = "tcp6"; > > > + const char *server_addr; > > > + char buf[256]; > > > + > > > + inet_ntop(AF_INET6, &server_sin->sin6_addr, buf, sizeof(buf)); > > > + server_addr = buf; > > > + > > > + if (IN6_IS_ADDR_V4MAPPED(&server_sin->sin6_addr)) { > > > + type = "tcp4"; > > > + server_addr = strrchr(server_addr, ':') + 1; > > > + } > > > + > > > + return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > > > ifname, > > > + type, > > > client_ip ? "src-ip" : "", > > > client_ip ?: "", > > > - server_ip, > > > + server_addr, > > > client_ip ? "src-port" : "", > > > client_ip ? port : "", > > > port, start_queue); > > > > nit: I think this generate a truncation warning, not sure if it's easy > > to fix: > > > > ncdevmem.c:259:28: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 209 and 215 [-Wformat-truncation=] > > 259 | return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", > > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > maybe make buf smaller?
diff --git a/tools/testing/selftests/net/ncdevmem.c b/tools/testing/selftests/net/ncdevmem.c index 0feeca56c049..c4897b2bdc7c 100644 --- a/tools/testing/selftests/net/ncdevmem.c +++ b/tools/testing/selftests/net/ncdevmem.c @@ -242,13 +242,26 @@ static int configure_channels(unsigned int rx, unsigned int tx) return run_command("sudo ethtool -L %s rx %u tx %u", ifname, rx, tx); } -static int configure_flow_steering(void) +static int configure_flow_steering(struct sockaddr_in6 *server_sin) { - return run_command("sudo ethtool -N %s flow-type tcp4 %s %s dst-ip %s %s %s dst-port %s queue %d >&2", + const char *type = "tcp6"; + const char *server_addr; + char buf[256]; + + inet_ntop(AF_INET6, &server_sin->sin6_addr, buf, sizeof(buf)); + server_addr = buf; + + if (IN6_IS_ADDR_V4MAPPED(&server_sin->sin6_addr)) { + type = "tcp4"; + server_addr = strrchr(server_addr, ':') + 1; + } + + return run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", ifname, + type, client_ip ? "src-ip" : "", client_ip ?: "", - server_ip, + server_addr, client_ip ? "src-port" : "", client_ip ? port : "", port, start_queue); @@ -299,13 +312,53 @@ static int bind_rx_queue(unsigned int ifindex, unsigned int dmabuf_fd, return -1; } +static int enable_reuseaddr(int fd) +{ + int opt = 1; + int ret; + + ret = setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)); + if (ret) + return -errno; + + ret = setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + if (ret) + return -errno; + + return 0; +} + +static int parse_address(const char *str, int port, struct sockaddr_in6 *sin6) +{ + int ret; + + sin6->sin6_family = AF_INET6; + sin6->sin6_port = htons(port); + + ret = inet_pton(sin6->sin6_family, str, &sin6->sin6_addr); + if (ret != 1) { + /* fallback to plain IPv4 */ + ret = inet_pton(AF_INET, str, &sin6->sin6_addr.s6_addr32[3]); + if (ret != 1) + return -1; + + /* add ::ffff prefix */ + sin6->sin6_addr.s6_addr32[0] = 0; + sin6->sin6_addr.s6_addr32[1] = 0; + sin6->sin6_addr.s6_addr16[4] = 0; + sin6->sin6_addr.s6_addr16[5] = 0xffff; + } + + return 0; +} + int do_server(struct memory_buffer *mem) { char ctrl_data[sizeof(int) * 20000]; struct netdev_queue_id *queues; size_t non_page_aligned_frags = 0; - struct sockaddr_in client_addr; - struct sockaddr_in server_sin; + struct sockaddr_in6 client_addr; + struct sockaddr_in6 server_sin; size_t page_aligned_frags = 0; size_t total_received = 0; socklen_t client_addr_len; @@ -317,9 +370,12 @@ int do_server(struct memory_buffer *mem) int socket_fd; int client_fd; size_t i = 0; - int opt = 1; int ret; + ret = parse_address(server_ip, atoi(port), &server_sin); + if (ret < 0) + error(1, 0, "parse server address"); + if (reset_flow_steering()) error(1, 0, "Failed to reset flow steering\n"); @@ -328,7 +384,7 @@ int do_server(struct memory_buffer *mem) error(1, 0, "Failed to configure rss\n"); /* Flow steer our devmem flows to start_queue */ - if (configure_flow_steering()) + if (configure_flow_steering(&server_sin)) error(1, 0, "Failed to configure flow steering\n"); sleep(1); @@ -349,29 +405,16 @@ int do_server(struct memory_buffer *mem) if (!tmp_mem) error(1, ENOMEM, "malloc failed"); - server_sin.sin_family = AF_INET; - server_sin.sin_port = htons(atoi(port)); - - ret = inet_pton(server_sin.sin_family, server_ip, &server_sin.sin_addr); - if (ret < 0) - error(1, errno, "%s: [FAIL, create socket]\n", TEST_PREFIX); - - socket_fd = socket(server_sin.sin_family, SOCK_STREAM, 0); + socket_fd = socket(AF_INET6, SOCK_STREAM, 0); if (socket_fd < 0) error(1, errno, "%s: [FAIL, create socket]\n", TEST_PREFIX); - ret = setsockopt(socket_fd, SOL_SOCKET, SO_REUSEPORT, &opt, - sizeof(opt)); - if (ret) - error(1, errno, "%s: [FAIL, set sock opt]\n", TEST_PREFIX); - - ret = setsockopt(socket_fd, SOL_SOCKET, SO_REUSEADDR, &opt, - sizeof(opt)); + ret = enable_reuseaddr(socket_fd); if (ret) - error(1, errno, "%s: [FAIL, set sock opt]\n", TEST_PREFIX); + error(1, errno, "%s: [FAIL, reuseaddr]\n", TEST_PREFIX); fprintf(stderr, "binding to address %s:%d\n", server_ip, - ntohs(server_sin.sin_port)); + ntohs(server_sin.sin6_port)); ret = bind(socket_fd, &server_sin, sizeof(server_sin)); if (ret) @@ -383,16 +426,16 @@ int do_server(struct memory_buffer *mem) client_addr_len = sizeof(client_addr); - inet_ntop(server_sin.sin_family, &server_sin.sin_addr, buffer, + inet_ntop(AF_INET6, &server_sin.sin6_addr, buffer, sizeof(buffer)); fprintf(stderr, "Waiting or connection on %s:%d\n", buffer, - ntohs(server_sin.sin_port)); + ntohs(server_sin.sin6_port)); client_fd = accept(socket_fd, &client_addr, &client_addr_len); - inet_ntop(client_addr.sin_family, &client_addr.sin_addr, buffer, + inet_ntop(AF_INET6, &client_addr.sin6_addr, buffer, sizeof(buffer)); fprintf(stderr, "Got connection from %s:%d\n", buffer, - ntohs(client_addr.sin_port)); + ntohs(client_addr.sin6_port)); while (1) { struct iovec iov = { .iov_base = iobuf,