| Message ID | 20241108120311.87795-3-charles.goodix@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: input: Goodix GT7986U SPI HID Touchscreen | expand |
On Fri, 08 Nov 2024 20:03:11 +0800, Charles Wang wrote: > Since all boards use the same address, drop the goodix,hid-report-addr > property and hardcode it in the driver as a default value. > > Signed-off-by: Charles Wang <charles.goodix@gmail.com> > --- > .../devicetree/bindings/input/goodix,gt7986u-spifw.yaml | 7 ------- > 1 file changed, 7 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241108120311.87795-3-charles.goodix@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Fri, Nov 08, 2024 at 08:03:11PM +0800, Charles Wang wrote: > Since all boards use the same address, drop the goodix,hid-report-addr > property and hardcode it in the driver as a default value. Where's the driver change? I don't see the point in defining this and then removing it in the next patch. > > Signed-off-by: Charles Wang <charles.goodix@gmail.com> > --- > .../devicetree/bindings/input/goodix,gt7986u-spifw.yaml | 7 ------- > 1 file changed, 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml > index 8105b9ce2..c9e346a60 100644 > --- a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml > +++ b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml > @@ -36,11 +36,6 @@ properties: > reset-gpios: > maxItems: 1 > > - goodix,hid-report-addr: > - $ref: /schemas/types.yaml#/definitions/uint32 > - description: > - The register address for retrieving HID report data. > - > spi-max-frequency: true > > required: > @@ -48,7 +43,6 @@ required: > - reg > - interrupts > - reset-gpios > - - goodix,hid-report-addr Dropping a required property is an ABI break. A devicetree that passes with the schema will not work on current kernels that require this property. > > unevaluatedProperties: false > > @@ -68,7 +62,6 @@ examples: > interrupts = <25 IRQ_TYPE_LEVEL_LOW>; > reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; > spi-max-frequency = <10000000>; > - goodix,hid-report-addr = <0x22c8c>; > }; > }; > > -- > 2.43.0 >
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml index 8105b9ce2..c9e346a60 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml @@ -36,11 +36,6 @@ properties: reset-gpios: maxItems: 1 - goodix,hid-report-addr: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The register address for retrieving HID report data. - spi-max-frequency: true required: @@ -48,7 +43,6 @@ required: - reg - interrupts - reset-gpios - - goodix,hid-report-addr unevaluatedProperties: false @@ -68,7 +62,6 @@ examples: interrupts = <25 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; spi-max-frequency = <10000000>; - goodix,hid-report-addr = <0x22c8c>; }; };
Since all boards use the same address, drop the goodix,hid-report-addr property and hardcode it in the driver as a default value. Signed-off-by: Charles Wang <charles.goodix@gmail.com> --- .../devicetree/bindings/input/goodix,gt7986u-spifw.yaml | 7 ------- 1 file changed, 7 deletions(-)