arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS

Commit Message

Jonas Karlman Nov. 8, 2024, 5:14 p.m. UTC

Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS.

Signed-off-by: Jonas Karlman <[e-mail]>
---
Tested and working with video=1920x1080@60 cmdline on a CM3588 NAS
---
 .../rk3588-friendlyelec-cm3588-nas.dts        | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

Comments

Heiko Stübner Nov. 9, 2024, 6:27 p.m. UTC | #1

On Fri, 8 Nov 2024 17:14:19 +0000, Jonas Karlman wrote:
> Add the necessary DT changes to enable HDMI0 on FriendlyElec CM3588 NAS.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS
      commit: 6f846fe4d07a1b16e769754c5101c2e5a039d729

Best regards,

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
index 411007cb8118..b3a04ca370bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588-nas.dts
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588-friendlyelec-cm3588.dtsi"
 
@@ -89,6 +90,17 @@  button-user {
 		};
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
@@ -307,6 +319,26 @@  &gpio4 {
 		"", "", "", "";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 /* Connected to MIPI-DSI0 */
 &i2c5 {
 	pinctrl-names = "default";
@@ -776,3 +808,18 @@  usbdp_phy0_dp_altmode_mux: endpoint@1 {
 &usbdp_phy1 {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};