@@ -47,7 +47,7 @@ config PIIX
select IDE_PIIX
select ISA_BUS
select MC146818RTC
- select USB_UHCI
+ select USB_UHCI_PCI
config VT82C686
bool
@@ -55,7 +55,7 @@ config VT82C686
select ISA_SUPERIO
select ACPI
select ACPI_SMBUS
- select USB_UHCI
+ select USB_UHCI_PCI
select APM
select I8254
select I8257
@@ -26,7 +26,7 @@
#include "hw/intc/i8259.h"
#include "hw/irq.h"
#include "hw/dma/i8257.h"
-#include "hw/usb/hcd-uhci.h"
+#include "hw/usb/hcd-uhci-pci.h"
#include "hw/timer/i8254.h"
#include "hw/rtc/mc146818rtc.h"
#include "migration/vmstate.h"
@@ -598,7 +598,7 @@ struct ViaISAState {
ViaSuperIOState via_sio;
MC146818RtcState rtc;
PCIIDEState ide;
- UHCIState uhci[2];
+ UHCIPCIState uhci[2];
ViaPMState pm;
ViaAC97State ac97;
PCIDevice mc97;
@@ -2,10 +2,14 @@ config USB
bool
config USB_UHCI
+ bool
+ select USB
+
+config USB_UHCI_PCI
bool
default y if PCI_DEVICES
depends on PCI
- select USB
+ select USB_UHCI
config USB_OHCI
bool
new file mode 100644
@@ -0,0 +1,255 @@
+/*
+ * USB UHCI controller emulation
+ * PCI code
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ * Magor rewrite of the UHCI data structures parser and frame processor
+ * Support for fully async operation and multiple outstanding transactions
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/irq.h"
+#include "hw/usb.h"
+#include "migration/vmstate.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/main-loop.h"
+#include "qemu/module.h"
+#include "qom/object.h"
+#include "hcd-uhci-pci.h"
+
+struct UHCIPCIDeviceClass {
+ PCIDeviceClass parent_class;
+ UHCIPCIInfo info;
+};
+
+static const VMStateDescription vmstate_uhci = {
+ .name = "pci_uhci",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (const VMStateField[]) {
+ VMSTATE_PCI_DEVICE(dev, UHCIPCIState),
+ VMSTATE_STRUCT(state, UHCIPCIState, 1, vmstate_uhci_state, UHCIState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void uhci_pci_reset(UHCIState *uhci)
+{
+ UHCIPCIState *pstate = container_of(uhci, UHCIPCIState, state);
+ PCIDevice *d = &pstate->dev;
+
+ d->config[0x6a] = 0x01; /* usb clock */
+ d->config[0x6b] = 0x00;
+
+ uhci_state_reset(uhci);
+}
+
+void usb_uhci_common_realize_pci(PCIDevice *dev, Error **errp)
+{
+ Error *err = NULL;
+ UHCIPCIDeviceClass *u = UHCI_PCI_GET_CLASS(dev);
+ UHCIPCIState *uhci = UHCI_PCI(dev);
+ UHCIState *s = &uhci->state;
+ uint8_t *pci_conf = dev->config;
+
+ pci_conf[PCI_CLASS_PROG] = 0x00;
+ /* TODO: reset value should be 0. */
+ pci_conf[USB_SBRN] = USB_RELEASE_1; /* release number */
+ pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
+
+ s->irq = pci_allocate_irq(dev);
+ s->masterbus = uhci->masterbus;
+ s->firstport = uhci->firstport;
+ s->maxframes = uhci->maxframes;
+ s->frame_bandwidth = uhci->frame_bandwidth;
+ s->as = pci_get_address_space(dev);
+ s->uhci_reset = uhci_pci_reset;
+
+ usb_uhci_init(s, DEVICE(dev), &err);
+
+ /*
+ * Use region 4 for consistency with real hardware. BSD guests seem
+ * to rely on this.
+ */
+ pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->mem);
+}
+
+static void uhci_pci_reset_pci(DeviceState *dev)
+{
+ PCIDevice *d = PCI_DEVICE(dev);
+ UHCIPCIState *uhci = UHCI_PCI(d);
+
+ uhci_pci_reset(&uhci->state);
+}
+
+static void usb_uhci_pci_exit(PCIDevice *dev)
+{
+ UHCIPCIState *uhci = UHCI_PCI(dev);
+ UHCIState *s = &uhci->state;
+
+ usb_uhci_exit(s);
+
+ qemu_free_irq(s->irq);
+}
+
+static Property uhci_properties_companion[] = {
+ DEFINE_PROP_STRING("masterbus", UHCIPCIState, masterbus),
+ DEFINE_PROP_UINT32("firstport", UHCIPCIState, firstport, 0),
+ DEFINE_PROP_UINT32("bandwidth", UHCIPCIState, frame_bandwidth, 1280),
+ DEFINE_PROP_UINT32("maxframes", UHCIPCIState, maxframes, 128),
+ DEFINE_PROP_END_OF_LIST(),
+};
+static Property uhci_properties_standalone[] = {
+ DEFINE_PROP_UINT32("bandwidth", UHCIPCIState, frame_bandwidth, 1280),
+ DEFINE_PROP_UINT32("maxframes", UHCIPCIState, maxframes, 128),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void uhci_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->class_id = PCI_CLASS_SERIAL_USB;
+ dc->vmsd = &vmstate_uhci;
+ dc->reset = uhci_pci_reset_pci;
+ set_bit(DEVICE_CATEGORY_USB, dc->categories);
+}
+
+static const TypeInfo uhci_pci_type_info = {
+ .name = TYPE_UHCI_PCI,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(UHCIPCIState),
+ .class_size = sizeof(UHCIPCIDeviceClass),
+ .class_init = uhci_pci_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CONVENTIONAL_PCI_DEVICE },
+ { },
+ },
+};
+
+void uhci_pci_data_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ UHCIPCIDeviceClass *u = UHCI_PCI_CLASS(klass);
+ UHCIPCIInfo *info = data;
+
+ k->realize = info->realize ? info->realize : usb_uhci_common_realize_pci;
+ k->exit = info->unplug ? usb_uhci_pci_exit : NULL;
+ k->vendor_id = info->vendor_id;
+ k->device_id = info->device_id;
+ k->revision = info->revision;
+ if (!info->unplug) {
+ /* uhci controllers in companion setups can't be hotplugged */
+ dc->hotpluggable = false;
+ device_class_set_props(dc, uhci_properties_companion);
+ } else {
+ device_class_set_props(dc, uhci_properties_standalone);
+ }
+ if (info->notuser) {
+ dc->user_creatable = false;
+ }
+ u->info = *info;
+}
+
+static UHCIPCIInfo uhci_pci_info[] = {
+ {
+ .name = TYPE_PIIX3_USB_UHCI,
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82371SB_2,
+ .revision = 0x01,
+ .irq_pin = 3,
+ .unplug = true,
+ },{
+ .name = TYPE_PIIX4_USB_UHCI,
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82371AB_2,
+ .revision = 0x01,
+ .irq_pin = 3,
+ .unplug = true,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(1), /* 00:1d.0 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1,
+ .revision = 0x03,
+ .irq_pin = 0,
+ .unplug = false,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(2), /* 00:1d.1 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2,
+ .revision = 0x03,
+ .irq_pin = 1,
+ .unplug = false,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(3), /* 00:1d.2 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3,
+ .revision = 0x03,
+ .irq_pin = 2,
+ .unplug = false,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(4), /* 00:1a.0 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4,
+ .revision = 0x03,
+ .irq_pin = 0,
+ .unplug = false,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(5), /* 00:1a.1 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5,
+ .revision = 0x03,
+ .irq_pin = 1,
+ .unplug = false,
+ },{
+ .name = TYPE_ICH9_USB_UHCI(6), /* 00:1a.2 */
+ .vendor_id = PCI_VENDOR_ID_INTEL,
+ .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6,
+ .revision = 0x03,
+ .irq_pin = 2,
+ .unplug = false,
+ }
+};
+
+static void uhci_pci_register_types(void)
+{
+ TypeInfo type_info = {
+ .parent = TYPE_UHCI_PCI,
+ .class_init = uhci_pci_data_class_init,
+ };
+ int i;
+
+ type_register_static(&uhci_pci_type_info);
+
+ for (i = 0; i < ARRAY_SIZE(uhci_pci_info); i++) {
+ type_info.name = uhci_pci_info[i].name;
+ type_info.class_data = uhci_pci_info + i;
+ type_register(&type_info);
+ }
+}
+
+type_init(uhci_pci_register_types)
new file mode 100644
@@ -0,0 +1,63 @@
+/*
+ * USB UHCI controller emulation
+ *
+ * Copyright (c) 2005 Fabrice Bellard
+ *
+ * Copyright (c) 2008 Max Krasnyansky
+ * Magor rewrite of the UHCI data structures parser and frame processor
+ * Support for fully async operation and multiple outstanding transactions
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef HW_USB_HCD_UHCI_PCI_H
+#define HW_USB_HCD_UHCI_PCI_H
+
+#include "hcd-uhci.h"
+
+#define TYPE_UHCI_PCI "pci-uhci"
+
+struct UHCIPCIState {
+ PCIDevice dev;
+ UHCIState state;
+
+ /* Properties */
+ char *masterbus;
+ uint32_t firstport;
+ uint32_t frame_bandwidth;
+ uint32_t maxframes;
+ uint32_t num_ports;
+};
+
+OBJECT_DECLARE_TYPE(UHCIPCIState, UHCIPCIDeviceClass, UHCI_PCI)
+
+typedef struct UHCIPCIInfo {
+ const char *name;
+ uint16_t vendor_id;
+ uint16_t device_id;
+ uint8_t revision;
+ uint8_t irq_pin;
+ void (*realize)(PCIDevice *dev, Error **errp);
+ bool unplug;
+ bool notuser; /* disallow user_creatable */
+} UHCIPCIInfo;
+
+void usb_uhci_common_realize_pci(PCIDevice *dev, Error **errp);
+void uhci_pci_data_class_init(ObjectClass *klass, void *data);
+
+#endif /* HW_USB_HCD_UHCI_PCI_H */
@@ -30,7 +30,6 @@
#include "hw/usb.h"
#include "hw/usb/uhci-regs.h"
#include "migration/vmstate.h"
-#include "hw/pci/pci.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "qapi/error.h"
@@ -62,11 +61,6 @@ enum {
typedef struct UHCIAsync UHCIAsync;
-struct UHCIPCIDeviceClass {
- PCIDeviceClass parent_class;
- UHCIInfo info;
-};
-
/*
* Pending async transaction.
* 'packet' must be the first field because completion
@@ -302,20 +296,13 @@ static void uhci_update_irq(UHCIState *s)
qemu_set_irq(s->irq, level);
}
-static void uhci_reset(DeviceState *dev)
+void uhci_state_reset(UHCIState *s)
{
- PCIDevice *d = PCI_DEVICE(dev);
- UHCIState *s = UHCI(d);
- uint8_t *pci_conf;
int i;
UHCIPort *port;
trace_usb_uhci_reset();
- pci_conf = s->dev.config;
-
- pci_conf[0x6a] = 0x01; /* usb clock */
- pci_conf[0x6b] = 0x00;
s->cmd = 0;
s->status = UHCI_STS_HCHALTED;
s->status2 = 0;
@@ -336,6 +323,11 @@ static void uhci_reset(DeviceState *dev)
uhci_update_irq(s);
}
+static void uhci_reset(UHCIState *s)
+{
+ s->uhci_reset(s);
+}
+
static const VMStateDescription vmstate_uhci_port = {
.name = "uhci port",
.version_id = 1,
@@ -357,13 +349,12 @@ static int uhci_post_load(void *opaque, int version_id)
return 0;
}
-static const VMStateDescription vmstate_uhci = {
+const VMStateDescription vmstate_uhci_state = {
.name = "uhci",
- .version_id = 3,
+ .version_id = 4,
.minimum_version_id = 1,
.post_load = uhci_post_load,
.fields = (const VMStateField[]) {
- VMSTATE_PCI_DEVICE(dev, UHCIState),
VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState, NULL),
VMSTATE_STRUCT_ARRAY(ports, UHCIState, UHCI_PORTS, 1,
vmstate_uhci_port, UHCIPort),
@@ -409,11 +400,11 @@ static void uhci_port_write(void *opaque, hwaddr addr,
port = &s->ports[i];
usb_device_reset(port->port.dev);
}
- uhci_reset(DEVICE(s));
+ uhci_reset(s);
return;
}
if (val & UHCI_CMD_HCRESET) {
- uhci_reset(DEVICE(s));
+ uhci_reset(s);
return;
}
s->cmd = val;
@@ -628,9 +619,21 @@ static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr)
return NULL;
}
+static void uhci_dma_read(UHCIState *s, dma_addr_t addr, void *buf,
+ dma_addr_t len)
+{
+ dma_memory_read(s->as, addr, buf, len, MEMTXATTRS_UNSPECIFIED);
+}
+
+static void uhci_dma_write(UHCIState *s, dma_addr_t addr, void *buf,
+ dma_addr_t len)
+{
+ dma_memory_write(s->as, addr, buf, len, MEMTXATTRS_UNSPECIFIED);
+}
+
static void uhci_read_td(UHCIState *s, UHCI_TD *td, uint32_t link)
{
- pci_dma_read(&s->dev, link & ~0xf, td, sizeof(*td));
+ uhci_dma_read(s, link & ~0xf, td, sizeof(*td));
le32_to_cpus(&td->link);
le32_to_cpus(&td->ctrl);
le32_to_cpus(&td->token);
@@ -712,7 +715,7 @@ static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async,
}
if (pid == USB_TOKEN_IN) {
- pci_dma_write(&s->dev, td->buffer, async->buf, len);
+ uhci_dma_write(s, td->buffer, async->buf, len);
if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
*int_mask |= 0x02;
/* short packet: do not update QH */
@@ -848,7 +851,7 @@ static int uhci_handle_td(UHCIState *s, UHCIQueue *q, uint32_t qh_addr,
switch (pid) {
case USB_TOKEN_OUT:
case USB_TOKEN_SETUP:
- pci_dma_read(&s->dev, td->buffer, async->buf, max_len);
+ uhci_dma_read(s, td->buffer, async->buf, max_len);
usb_handle_packet(q->ep->dev, &async->packet);
if (async->packet.status == USB_RET_SUCCESS) {
async->packet.actual_length = max_len;
@@ -976,7 +979,7 @@ static void uhci_process_frame(UHCIState *s)
frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
- pci_dma_read(&s->dev, frame_addr, &link, 4);
+ uhci_dma_read(s, frame_addr, &link, 4);
le32_to_cpus(&link);
int_mask = 0;
@@ -1016,7 +1019,7 @@ static void uhci_process_frame(UHCIState *s)
}
}
- pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh));
+ uhci_dma_read(s, link & ~0xf, &qh, sizeof(qh));
le32_to_cpus(&qh.link);
le32_to_cpus(&qh.el_link);
@@ -1041,7 +1044,7 @@ static void uhci_process_frame(UHCIState *s)
if (old_td_ctrl != td.ctrl) {
/* update the status bits of the TD */
val = cpu_to_le32(td.ctrl);
- pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val));
+ uhci_dma_write(s, (link & ~0xf) + 4, &val, sizeof(val));
}
switch (ret) {
@@ -1069,7 +1072,7 @@ static void uhci_process_frame(UHCIState *s)
/* update QH element link */
qh.el_link = link;
val = cpu_to_le32(qh.el_link);
- pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val));
+ uhci_dma_write(s, (curr_qh & ~0xf) + 4, &val, sizeof(val));
if (!depth_first(link)) {
/* done with this QH */
@@ -1178,20 +1181,11 @@ static USBPortOps uhci_port_ops = {
static USBBusOps uhci_bus_ops = {
};
-void usb_uhci_common_realize(PCIDevice *dev, Error **errp)
+void usb_uhci_init(UHCIState *s, DeviceState *dev, Error **errp)
{
Error *err = NULL;
- UHCIPCIDeviceClass *u = UHCI_GET_CLASS(dev);
- UHCIState *s = UHCI(dev);
- uint8_t *pci_conf = s->dev.config;
int i;
- pci_conf[PCI_CLASS_PROG] = 0x00;
- /* TODO: reset value should be 0. */
- pci_conf[USB_SBRN] = USB_RELEASE_1; /* release number */
- pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
- s->irq = pci_allocate_irq(dev);
-
if (s->masterbus) {
USBPort *ports[UHCI_PORTS];
for (i = 0; i < UHCI_PORTS; i++) {
@@ -1212,25 +1206,17 @@ void usb_uhci_common_realize(PCIDevice *dev, Error **errp)
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
}
}
- s->bh = qemu_bh_new_guarded(uhci_bh, s, &DEVICE(dev)->mem_reentrancy_guard);
+ s->bh = qemu_bh_new_guarded(uhci_bh, s, &dev->mem_reentrancy_guard);
s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s);
s->num_ports_vmstate = UHCI_PORTS;
QTAILQ_INIT(&s->queues);
- memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s,
+ memory_region_init_io(&s->mem, OBJECT(s), &uhci_ioport_ops, s,
"uhci", 0x20);
-
- /*
- * Use region 4 for consistency with real hardware. BSD guests seem
- * to rely on this.
- */
- pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
}
-static void usb_uhci_exit(PCIDevice *dev)
+void usb_uhci_exit(UHCIState *s)
{
- UHCIState *s = UHCI(dev);
-
trace_usb_uhci_exit();
if (s->frame_timer) {
@@ -1248,144 +1234,3 @@ static void usb_uhci_exit(PCIDevice *dev)
usb_bus_release(&s->bus);
}
}
-
-static Property uhci_properties_companion[] = {
- DEFINE_PROP_STRING("masterbus", UHCIState, masterbus),
- DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0),
- DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
- DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
- DEFINE_PROP_END_OF_LIST(),
-};
-static Property uhci_properties_standalone[] = {
- DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
- DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
- DEFINE_PROP_END_OF_LIST(),
-};
-
-static void uhci_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
- PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
-
- k->class_id = PCI_CLASS_SERIAL_USB;
- dc->vmsd = &vmstate_uhci;
- dc->reset = uhci_reset;
- set_bit(DEVICE_CATEGORY_USB, dc->categories);
-}
-
-static const TypeInfo uhci_pci_type_info = {
- .name = TYPE_UHCI,
- .parent = TYPE_PCI_DEVICE,
- .instance_size = sizeof(UHCIState),
- .class_size = sizeof(UHCIPCIDeviceClass),
- .abstract = true,
- .class_init = uhci_class_init,
- .interfaces = (InterfaceInfo[]) {
- { INTERFACE_CONVENTIONAL_PCI_DEVICE },
- { },
- },
-};
-
-void uhci_data_class_init(ObjectClass *klass, void *data)
-{
- PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
- DeviceClass *dc = DEVICE_CLASS(klass);
- UHCIPCIDeviceClass *u = UHCI_CLASS(klass);
- UHCIInfo *info = data;
-
- k->realize = info->realize ? info->realize : usb_uhci_common_realize;
- k->exit = info->unplug ? usb_uhci_exit : NULL;
- k->vendor_id = info->vendor_id;
- k->device_id = info->device_id;
- k->revision = info->revision;
- if (!info->unplug) {
- /* uhci controllers in companion setups can't be hotplugged */
- dc->hotpluggable = false;
- device_class_set_props(dc, uhci_properties_companion);
- } else {
- device_class_set_props(dc, uhci_properties_standalone);
- }
- if (info->notuser) {
- dc->user_creatable = false;
- }
- u->info = *info;
-}
-
-static UHCIInfo uhci_info[] = {
- {
- .name = TYPE_PIIX3_USB_UHCI,
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82371SB_2,
- .revision = 0x01,
- .irq_pin = 3,
- .unplug = true,
- },{
- .name = TYPE_PIIX4_USB_UHCI,
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82371AB_2,
- .revision = 0x01,
- .irq_pin = 3,
- .unplug = true,
- },{
- .name = TYPE_ICH9_USB_UHCI(1), /* 00:1d.0 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1,
- .revision = 0x03,
- .irq_pin = 0,
- .unplug = false,
- },{
- .name = TYPE_ICH9_USB_UHCI(2), /* 00:1d.1 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2,
- .revision = 0x03,
- .irq_pin = 1,
- .unplug = false,
- },{
- .name = TYPE_ICH9_USB_UHCI(3), /* 00:1d.2 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3,
- .revision = 0x03,
- .irq_pin = 2,
- .unplug = false,
- },{
- .name = TYPE_ICH9_USB_UHCI(4), /* 00:1a.0 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI4,
- .revision = 0x03,
- .irq_pin = 0,
- .unplug = false,
- },{
- .name = TYPE_ICH9_USB_UHCI(5), /* 00:1a.1 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI5,
- .revision = 0x03,
- .irq_pin = 1,
- .unplug = false,
- },{
- .name = TYPE_ICH9_USB_UHCI(6), /* 00:1a.2 */
- .vendor_id = PCI_VENDOR_ID_INTEL,
- .device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI6,
- .revision = 0x03,
- .irq_pin = 2,
- .unplug = false,
- }
-};
-
-static void uhci_register_types(void)
-{
- TypeInfo uhci_type_info = {
- .parent = TYPE_UHCI,
- .class_init = uhci_data_class_init,
- };
- int i;
-
- type_register_static(&uhci_pci_type_info);
-
- for (i = 0; i < ARRAY_SIZE(uhci_info); i++) {
- uhci_type_info.name = uhci_info[i].name;
- uhci_type_info.class_data = uhci_info + i;
- type_register(&uhci_type_info);
- }
-}
-
-type_init(uhci_register_types)
@@ -32,6 +32,7 @@
#include "qemu/timer.h"
#include "hw/pci/pci_device.h"
#include "hw/usb.h"
+#include "hw/sysbus.h"
typedef struct UHCIQueue UHCIQueue;
@@ -42,9 +43,12 @@ typedef struct UHCIPort {
uint16_t ctrl;
} UHCIPort;
-typedef struct UHCIState {
- PCIDevice dev;
- MemoryRegion io_bar;
+typedef struct UHCIState UHCIState;
+
+struct UHCIState {
+ MemoryRegion mem;
+ AddressSpace *as;
+ void (*uhci_reset)(UHCIState *);
USBBus bus; /* Note unused when we're a companion controller */
uint16_t cmd; /* cmd register */
uint16_t status;
@@ -72,24 +76,18 @@ typedef struct UHCIState {
char *masterbus;
uint32_t firstport;
uint32_t maxframes;
-} UHCIState;
+};
-#define TYPE_UHCI "pci-uhci-usb"
-OBJECT_DECLARE_TYPE(UHCIState, UHCIPCIDeviceClass, UHCI)
+#define TYPE_UHCI "uhci-usb"
+OBJECT_DECLARE_TYPE(UHCIState, UHCIDeviceClass, UHCI)
-typedef struct UHCIInfo {
- const char *name;
- uint16_t vendor_id;
- uint16_t device_id;
- uint8_t revision;
- uint8_t irq_pin;
- void (*realize)(PCIDevice *dev, Error **errp);
- bool unplug;
- bool notuser; /* disallow user_creatable */
-} UHCIInfo;
+extern const VMStateDescription vmstate_uhci_state;
void uhci_data_class_init(ObjectClass *klass, void *data);
void usb_uhci_common_realize(PCIDevice *dev, Error **errp);
+void usb_uhci_init(UHCIState *s, DeviceState *dev, Error **errp);
+void uhci_state_reset(UHCIState *s);
+void usb_uhci_exit(UHCIState *s);
#define TYPE_PIIX3_USB_UHCI "piix3-usb-uhci"
#define TYPE_PIIX4_USB_UHCI "piix4-usb-uhci"
@@ -13,6 +13,7 @@ system_ss.add(when: 'CONFIG_USB', if_true: files(
# usb host adapters
system_ss.add(when: 'CONFIG_USB_UHCI', if_true: files('hcd-uhci.c'))
+system_ss.add(when: 'CONFIG_USB_UHCI_PCI', if_true: files('hcd-uhci-pci.c'))
system_ss.add(when: 'CONFIG_USB_OHCI', if_true: files('hcd-ohci.c'))
system_ss.add(when: 'CONFIG_USB_OHCI_PCI', if_true: files('hcd-ohci-pci.c'))
system_ss.add(when: 'CONFIG_USB_OHCI_SYSBUS', if_true: files('hcd-ohci-sysbus.c'))
@@ -1,17 +1,17 @@
#include "qemu/osdep.h"
#include "hw/irq.h"
#include "hw/isa/vt82c686.h"
-#include "hcd-uhci.h"
+#include "hcd-uhci-pci.h"
static void uhci_isa_set_irq(void *opaque, int irq_num, int level)
{
- UHCIState *s = opaque;
+ UHCIPCIState *s = opaque;
via_isa_set_irq(&s->dev, 0, level);
}
static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp)
{
- UHCIState *s = UHCI(dev);
+ UHCIPCIState *s = UHCI_PCI(dev);
uint8_t *pci_conf = s->dev.config;
/* USB misc control 1/2 */
@@ -21,12 +21,12 @@ static void usb_uhci_vt82c686b_realize(PCIDevice *dev, Error **errp)
/* USB legacy support */
pci_set_long(pci_conf + 0xc0, 0x00002000);
- usb_uhci_common_realize(dev, errp);
- object_unref(s->irq);
- s->irq = qemu_allocate_irq(uhci_isa_set_irq, s, 0);
+ usb_uhci_common_realize_pci(dev, errp);
+ object_unref(s->state.irq);
+ s->state.irq = qemu_allocate_irq(uhci_isa_set_irq, &s->state, 0);
}
-static UHCIInfo uhci_info[] = {
+static UHCIPCIInfo uhci_info[] = {
{
.name = TYPE_VT82C686B_USB_UHCI,
.vendor_id = PCI_VENDOR_ID_VIA,
@@ -41,9 +41,9 @@ static UHCIInfo uhci_info[] = {
};
static const TypeInfo vt82c686b_usb_uhci_type_info = {
- .parent = TYPE_UHCI,
+ .parent = TYPE_UHCI_PCI,
.name = TYPE_VT82C686B_USB_UHCI,
- .class_init = uhci_data_class_init,
+ .class_init = uhci_pci_data_class_init,
.class_data = uhci_info,
};
@@ -16,7 +16,7 @@
#include "hw/acpi/piix4.h"
#include "hw/ide/pci.h"
#include "hw/rtc/mc146818rtc.h"
-#include "hw/usb/hcd-uhci.h"
+#include "hw/usb/hcd-uhci-pci.h"
/* PIRQRC[A:D]: PIRQx Route Control Registers */
#define PIIX_PIRQCA 0x60
@@ -57,7 +57,7 @@ struct PIIXState {
MC146818RtcState rtc;
PCIIDEState ide;
- UHCIState uhci;
+ UHCIPCIState uhci;
PIIX4PMState pm;
uint32_t smb_io_base;
Some machines (like Aspeed ARM) only have a sysbus UHCI controller. The current UHCI implementation only supports PCI based UHCI controllers. Move the UHCI-PCI device code into a separate file so that it is possible to create a sysbus UHCI device without PCI dependency. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/isa/Kconfig | 4 +- hw/isa/vt82c686.c | 4 +- hw/usb/Kconfig | 6 +- hw/usb/hcd-uhci-pci.c | 255 ++++++++++++++++++++++++++++++++++ hw/usb/hcd-uhci-pci.h | 63 +++++++++ hw/usb/hcd-uhci.c | 221 +++++------------------------ hw/usb/hcd-uhci.h | 30 ++-- hw/usb/meson.build | 1 + hw/usb/vt82c686-uhci-pci.c | 18 +-- include/hw/southbridge/piix.h | 4 +- 10 files changed, 386 insertions(+), 220 deletions(-) create mode 100644 hw/usb/hcd-uhci-pci.c create mode 100644 hw/usb/hcd-uhci-pci.h